Windows 7 Virtual Miniport Adapter?
Nov 24, 2012im having a problem with my wifi miniport adapter. its not working anymore. I tried reinstalling it but it doesnt work. i tried disabling it and enabling it but also not working
View 4 Repliesim having a problem with my wifi miniport adapter. its not working anymore. I tried reinstalling it but it doesnt work. i tried disabling it and enabling it but also not working
View 4 RepliesI recently found this in my network connections and I'm curious to what it is used for...
Anyone have an idea?
my above device is not working properly as per report .i had updated the divice driver ,tryied manuall install dell's driver but all are useless, its stil not working i think.
View 2 Replies View RelatedI'm trying to create a virtual wifi AP using the Microsoft Virtual Wifi Miniport Adapter and the netsh wlan command line context, but it's giving me a headache."netsh wlan show drivers" in the command line includes the output line "Hosted network supported: Yes" so my wireless card should be supported, correct? I can setup the hostednetwork fine with "netsh wlan set hostednetwork mode=allow ssid=blah key=blah" but when I try to start it with "netsh wlan start hostednetwork" I get the following output:"The hosted network couldn't be started. The group or resource is not in the correct state to perform the requested operation."My network adapter is a Rosewill RNX-N1 which contains a Ralink 2870 chipset (that chipset has been confirmed to support hostednetwork).
View 1 Replies View RelatedI used to see Wireless Connection 2 (Microsoft Virtual WiFi Miniport Adapter), but now it has disappeared.
I have tried netsh wlan set hostednetwork mode=allow ssid=<name of network> key=<password>. However, this hasn't brought back the connection in "Network Connections".
How can I add Microsoft Loopback Adapter LAN using Windows 7?
The procedure was easy in Windows XP but I couldnt reconginze that in 7
Any idea?
how I can get to this dialogue in Windows 7?
I need to add a virtual Network Adapter (Microsoft Loopback Adapter), but all I can do is to get to a "waiting for connected devices" dialogue... Is there any way to manually add some device in Windows 7?
My "Microsoft Virtual WiFi Miniport adapter" has disappeared. How do I activate it again?
View 7 Replies View Relatedhow can i install WAN Miniport (ATW) #2 on windows 7?
View 1 Replies View RelatedI cannot access the Internet from my desktop.I get message that Wan Miniport (IKEv2) cannot upload 31. I guess I need to download updated driver but how can I do it if I cannot access the Internet from this machine. I have a laptop. My laptop runs on Vista and my desktop on Window 7 64 bit.
View 2 Replies View RelatedI need the correct driver for WAN Miniport IKEv2 if you don't have it then can you tell me how to delete it from my devices on control panel.
View 1 Replies View RelatedSeem to be going around in circles ... just want to install Wan Miniport (IKEv2) driver. The driver won't install. I have a new internal adapter ... I haven't intalled yet. That's the issue ... Isn't it? The driver needs the adapter to recongize. Did I fix it myself? Install the adapter then the drivers
View 1 Replies View RelatedI upgraded to Windows 7, but I have a few software I installed on Virtual PC 2007 before. I use XP mode but can't find a way to use the virtual HD created with Virtual PC 2007. Is there a way to convert the virtual HD so that XP mode can recognize?
View 1 Replies View RelatedHow to Change Virtual Machine Settings in Windows Virtual PC ?
View 0 Replies View RelatedA windows update failed, and didn't back out properly. My machine is left crippled and cannot access the Internet (so can't use MS Driver update!). It won't let me manually download the driver (AGILEVPN.SYS)
View 3 Replies View RelatedHow to Delete a Virtual Machine Created with Windows Virtual PC ?
View 0 Replies View RelatedHow to Boot from a CD or DVD in a Windows Virtual PC ?
View 0 Replies View RelatedHow to Create a Virtual Machine in Windows Virtual PC ?
View 0 Replies View RelatedAfter a strange install/uninstall of a dodgy modem, my wireless driver doesn't start. When i try to reinstall its' driver, it errors with 'Parameter not correct'. I later found out that this has something to do with WAN Miniport PPTP not being present (which must've been to do with that dodgy modem). However, I can't seem to find the driver for it or any way to reinstall.
View 1 Replies View RelatedWindows unable to install driver!
View 2 Replies View RelatedGot a new Windows 7 Enterprise 64 bit machine, found that it did not come with virtual PC. Downloaded the critical patch Windows6.1-KB958559-x64-RefreshPkg.msu and installed it. Windows Virtual PC shows up in my Start Menu. Good so far. I go through the steps to create a virtual machine and use the option to 'use an existing vhd file' and when I click 'Create' I get the above pop-up message "Cannot attach the virtual hard disk to the virtual machine. Check values and try again". A factual message but completely useless as with all error messages from Microsoft. I have tried the following:1. When I attach that vhd using Disk Management, it mounts in drive E:, I can see the files and browse the dirs in E:. In the Disk Management View, the drive shows up as 127 Gigs but 107 is unallocated space. The physical size of the vhd is only 25 Gigs2. Others in my company were able to create the virtual machine with the same vhd, checked the byte size and timing, so nothing is wrong with the vhd file itself.
3. Tried to create after shutting down all virus protection including the Micorsoft antimalware protection service. No luck4. Tried Vhd resize to resize the vhd to a smaller size (since it showed up in disk management as 127 Gigs, I thought maybe it was that size), but VHDResizer could not open the input file, gave an errors "Can only load fixed or dynamic drives"
Since I switched to 7 I've been having this problem with my Eset Smart Security. Every time I start the computer a little window pops up and says that it's trying to install "eset personal firewall miniport #xxx" then fails. I've tried reinstalling ESS and also going into device manager and updating the device. Does anyone know how to fix this issue.
View 2 Replies View RelatedLet me explain to you my setup before I explain my problem. I have a desktop computer with a wireless network card which connects to the router and the internet. I have a LAN cable attached from the desktop to my xbox 360. I have both my wireless connections and LAN connection bridged so I can play xbox 360 on xbox live without using the proprietary wireless adapter. My wireless network is capable of connecting to my wireless n router upto 300mbps.
So here is the issue:
When my xbox 360 is on, the Mac Bridge Miniport speed is listed as either 300mbps or sometimes 1Gbps which is good. As soon as I turn it off, the speed drops to 54mbps and stays there. In order for me to get it back to 300mbps I have to delete the Mac Bridge Miniport and recreate it or I have to turn my xbox back on. Is there someway I can make the Mac Bridge Miniport stay at 300mbps always, even when the xbox is off?
Where do Ii find this wan miniport (iKEv2).
View 1 Replies View RelatedI have this device "WAN Miniport (IKEv2)" under Network Adapters and it's always listed as not working. I disabled it a long time ago but it always comes up as an error when I scan my computer. It won't update the driver, Windows always says that there was an error, and as far as I can see it doesn't do anything but it won't let me remove it even though it isn't working.
View 8 Replies View Relatedi need help please to fix this problem where can i get a free download for this ???
View 3 Replies View RelatedI know there are several threads but they are with different cards and they didn't solve my issue...
I bought a new MEDION AKOYA P5334E and the system arrived installed normally with Windows 7 home edition.
I've installed on the computer the Windows 7 enterprise edition (x64) and many drivers could not be find. I've installed nost of them, except the display adapter. It's stuck on "standard vga graphic adapter". I have the AMD Radeon HD7570 card but no matter what I try is not working! tried to uninstall the current driver, tried to download the driver from the AMD website (when executing it - it's running but does nothing). when executed the auto detect from AMD website, I got the message "we were unable to find your product or OS"
Our office has an old program that we still need to use when upgrading our PC's to Windows 7. The program will run fine if you start a windows virtual PC and install and run it. However, based on the needs of our office, I need to be able to run Windows XP mode and simply have an icon for our users to click to take them to the application.If I install the program in windows XP mode, and then add a shortcut to the file under all users/start menu, a shortcut is placed in the appropriate place on the windows 7 machine and I can copy that shortcut ot the desktop. The program runs fine until you restart the computer. Once you restart the computer and double click the link on the windows 7 desktop to the program running in windows XP mode, it says:
Cannot start virtual application. The application is blocked from running as a virtual application.
I read some other posts saying to put a new shortcut in the all users/start menu folder. This works, but only until our users restart their computer. The next time the computer is up, the problem happens again. This is not an acceptable solution to have to create a new shortcut for each workstation each time the computer is restarted.
I am using MS Virtual PC v6.1.7600.16393.I had created a virtual machine on my system, which has been deleted now, but I have .vhd file created for that virtual machine.Now I am trying to create a new virtual machine by using the previous .vhd file.Unfortunately, when I start this newly created virtual machine, it asks to Insert Boot Media in selected Boot Device.I want to retrive few of my data stored in previously created virtual machine.
View 1 Replies View RelatedI'm going to upgrade my pc hardware, pretty much all of it since it's been "a while" (try 2009 since last time).
Is there any way I can migrate my Windows 7 professional to the new PC? I would like to completely format my HDD before moving it to my new machine and then reinstall my OS on it. It is a downloaded version so I haven't got a cd but it is legit, I have got the key and it is activated. Would there be a way to deactivate the key for this pc and then reactivate it on the new one with the same key?
I have Windows 7 and for reasons of my software, I installed Windows Virtual PC, who I have use for more than a year now. Last week, technical support did some checking on the system and now, I cant get access to the virtual computer. I received a message telling me that I need to activate in BIOS this option, however, I cant get access to the BIOS either. I update BIOS, but still do not work.
View 8 Replies View Related