After a strange install/uninstall of a dodgy modem, my wireless driver doesn't start. When i try to reinstall its' driver, it errors with 'Parameter not correct'. I later found out that this has something to do with WAN Miniport PPTP not being present (which must've been to do with that dodgy modem). However, I can't seem to find the driver for it or any way to reinstall.
View 1 Replies
I used to see Wireless Connection 2 (Microsoft Virtual WiFi Miniport Adapter), but now it has disappeared.
I have tried netsh wlan set hostednetwork mode=allow ssid=<name of network> key=<password>. However, this hasn't brought back the connection in "Network Connections".
I would like to know exactly what steps I need to take to connect to a PPTP VPN. I have seen the Tutorials on this forum but I still can't make a PPTP VPN connection.
View 1 Replies View Relatedmy computer crashed so re-booted it and since doing this i totally lost the wifi.error 651 continues to come up.
View 1 Replies View RelatedIs there a way to enable routing only specific ports via PPTP connection? So for example, Firefox would still be running on normal internet, while VNC would be working through PPTP.
View 2 Replies View RelatedI have my Windows 7 Ultimate PC here and I can connect to my worksite via the built-in VPN software in windows 7 no problem whatsoever.
I've just built a second PC and installed Windows 7 Home Premium on it, it is sitting here right next to me on my same network and it refuses to connect via VPN.
Username and Password is OK, I've perfectly mirrored the VPN configuration between the two machines and one connects and the other won't.
I've tried turning off all of the windows firewalls on the problematic system with no success.
Everytime it get's to verifying username and password and then it stalls there and eventually comes back with a 619 error. I've checked the logging, but I can't see anything useful there (but maybe i don't know what to look for?).
I have found a temporary workaround by way of using Hotspot Shield's free VPN services, but I would like to create my own proxy server at home instead so I can avoid the constant timeouts/disconnects involved with the free service.So far I've set up my PC to use a static IP on the network, and forwarded port 1723 to that address. I've also enabled incoming connections under adapter settings, but it just seems like I'm missing something big here. I am unable to make a connection to my home PC from my iPhone over WAN, and even if I was able to I'm not sure how to enable internet connection sharing over that connection.
View 2 Replies View RelatedWindows unable to install driver!
View 2 Replies View Relatedhow can i install WAN Miniport (ATW) #2 on windows 7?
View 1 Replies View Relatedim having a problem with my wifi miniport adapter. its not working anymore. I tried reinstalling it but it doesnt work. i tried disabling it and enabling it but also not working
View 4 Replies View RelatedSince I switched to 7 I've been having this problem with my Eset Smart Security. Every time I start the computer a little window pops up and says that it's trying to install "eset personal firewall miniport #xxx" then fails. I've tried reinstalling ESS and also going into device manager and updating the device. Does anyone know how to fix this issue.
View 2 Replies View RelatedLet me explain to you my setup before I explain my problem. I have a desktop computer with a wireless network card which connects to the router and the internet. I have a LAN cable attached from the desktop to my xbox 360. I have both my wireless connections and LAN connection bridged so I can play xbox 360 on xbox live without using the proprietary wireless adapter. My wireless network is capable of connecting to my wireless n router upto 300mbps.
So here is the issue:
When my xbox 360 is on, the Mac Bridge Miniport speed is listed as either 300mbps or sometimes 1Gbps which is good. As soon as I turn it off, the speed drops to 54mbps and stays there. In order for me to get it back to 300mbps I have to delete the Mac Bridge Miniport and recreate it or I have to turn my xbox back on. Is there someway I can make the Mac Bridge Miniport stay at 300mbps always, even when the xbox is off?
Where do Ii find this wan miniport (iKEv2).
View 1 Replies View RelatedI cannot access the Internet from my desktop.I get message that Wan Miniport (IKEv2) cannot upload 31. I guess I need to download updated driver but how can I do it if I cannot access the Internet from this machine. I have a laptop. My laptop runs on Vista and my desktop on Window 7 64 bit.
View 2 Replies View RelatedI need the correct driver for WAN Miniport IKEv2 if you don't have it then can you tell me how to delete it from my devices on control panel.
View 1 Replies View RelatedSeem to be going around in circles ... just want to install Wan Miniport (IKEv2) driver. The driver won't install. I have a new internal adapter ... I haven't intalled yet. That's the issue ... Isn't it? The driver needs the adapter to recongize. Did I fix it myself? Install the adapter then the drivers
View 1 Replies View RelatedI have this device "WAN Miniport (IKEv2)" under Network Adapters and it's always listed as not working. I disabled it a long time ago but it always comes up as an error when I scan my computer. It won't update the driver, Windows always says that there was an error, and as far as I can see it doesn't do anything but it won't let me remove it even though it isn't working.
View 8 Replies View RelatedI recently found this in my network connections and I'm curious to what it is used for...
Anyone have an idea?
i need help please to fix this problem where can i get a free download for this ???
View 3 Replies View Relatedmy above device is not working properly as per report .i had updated the divice driver ,tryied manuall install dell's driver but all are useless, its stil not working i think.
View 2 Replies View RelatedI'm trying to create a virtual wifi AP using the Microsoft Virtual Wifi Miniport Adapter and the netsh wlan command line context, but it's giving me a headache."netsh wlan show drivers" in the command line includes the output line "Hosted network supported: Yes" so my wireless card should be supported, correct? I can setup the hostednetwork fine with "netsh wlan set hostednetwork mode=allow ssid=blah key=blah" but when I try to start it with "netsh wlan start hostednetwork" I get the following output:"The hosted network couldn't be started. The group or resource is not in the correct state to perform the requested operation."My network adapter is a Rosewill RNX-N1 which contains a Ralink 2870 chipset (that chipset has been confirmed to support hostednetwork).
View 1 Replies View RelatedA windows update failed, and didn't back out properly. My machine is left crippled and cannot access the Internet (so can't use MS Driver update!). It won't let me manually download the driver (AGILEVPN.SYS)
View 3 Replies View RelatedI just got a computer for free, a Dell Studio 1555. When I got it, it would try to boot, then come to a screen that said that bootmgr.exe was missing. Sometimes I got a message that said something like mpio.sys was corrupted or missing. I have a Win 7 disk, so I put it in and tried to repair the installation. Each time I ran it, it said that the repair had failed. I tried to reinstall windows 7, and It made it to the first restart in the process. It showed the "Starting Windows" screen, but the colors of the windows logo never appeared, then I got the missing bootmgr screen. I decided to install Ubuntu and see if that worked, and it did (I installed it alongside the Windows installation). It was Ubuntu 10.04. I thought, "OK, so i'll just use this as a Linux machine"...and I decided to go back and reinstall so that I could use the entire hard drive. It never worked correctly again. Each subsequent time that I installed Ubuntu, I was told something along the lines of "Gnome Power Manager did not install correctly" and got a slow and choppy Ubuntu installation.Tried to install 11.10, and it failed completely. I opened the Ubuntu live from my usb drive, and opened the disk utility. I now cannot format, reformat, partition, or delete partitions on the drive. Is all of this just a case of a hard drive on its last legs, or is there something else going on here?
View 1 Replies View RelatedOk i have windows 7, Recently i have found out that i have a full list of errors that happened pretty much overnight:Here's the list 1. I can't go onto Control Panel It say's " This operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator" I AM THE ADMIN.. I am the only account too. 2. My Task bar is missing, When i go ctrl-alt-del i see no option to open up my task bar. [FIXED] 3. I cant RIGHT click on anything on my desktop, as well as my folders and stuff. Although i can right click while playing games or browsing the internet, so my mouse is definitely not broken. So u must be thinking, this guy has a virus for sure... Well if i do have a virus it must be made by ******* Bill Gates. Because i can't find it.I have the FULL version of Trend Micro Cillin as well as Norton 360, I've just recently downloaded Malvare Bytes, and that couldn't find anything as well. I've done a full system scam on both anti-virus programs, i see no viruses. I did get a virus a week ago, but Norton quickly picked it up, I'm thinking it may have changed a few settings in my computer before i managed to delete it.
View 3 Replies View Relatedwhat this notification means and what could be done to rectify matters:--- "Missing Events in Event Log.....19% (3,985) missing"
View 3 Replies View RelatedMy setup had an MBR issue a few days ago after installing Skyrim. I was unable to repair it using the windows 7 instal disc. I tried the automatic fix as well as bootrec.exe. After giving up and reinstalling a fresh windows 7, my rig has not been starting up properly. It insists on waking up from sleepwhen it was shutdown, i.e. Not sleeping. Well after a few days of this with no other problems, bootmgr can't be found again. Now, when I load the repair disc, it can't find my OS to even try a bootrec.exe on. But, when i go to load drivers the explorer window allows me to browse my c:/ drive and the installation is there. I would prefer to fix rather than reinstall due to a symantec DRM issue.
Windows 7 is on a 60 gb raid 0 setup (I know, i know, i deserve this for running raid 0)
i have a 2006 acer laptop that just recently decided not to get onto the internet. it will connect to the network but no internet. i have looked at more forums than i can count but to no avail. i will try to list the problems/symptoms but i am not familiar with programming language and don't know exactly what all the command prompts are suppoed to achieve and the like.-isatap ipv6 adapter is not working (some people say it does'nt matter but???)-ip address starts with 169-ipconfig /release and release6 does not workbecause "an address has not yet been associated with the network endpoint"-ipconfig /flushdns does not work because "function failed during execution"-cannot displaydns because "dns cache is unavailable"-cannot registerdns because "rpc server is unavailable"-checked my services and found some dependant ones that i could not manually start ERROR1075: DNS client service, tcp/ip netbios helper, routing and remote access, internetconnection sharing (ics). all failed to start with the same error code 1075-ERROR 10022- netlogon service-tried "netsh int ip reset" but reset echo request failed. "access denied". i am the admin for this computer. it worked the first time i tried it with no errors. now i get the failed echo message.
-cannot setclassid "as know adapter is in a state permissable for this action"-i saw something about the dhcp-read on one forum that people were having trouble after deleting norton(symantc) programs. i have deleted norton programs and think i got all of them (how to be sure?)-netsh winsock reset successfully-tried regrepair, regseeker, and a few of those "free download" programs that say they will fix your problems after you register/purchase them. i figure if the computer can stop working so easily i can get it to start as easily. maybe that's naivety speaking.-i have scanned my cpu for viruses (naturally) with 3-4 different programs (maybe norton would have found something).clean-thought it might have something to do with the registery since i had a nasty virus everal months ago that i think changed it somehow.-of course my system restore points are dated after this problem occured.-i bought the computer at staples and it did not come with a windows startup disc.
i can't think of any more though i know i've tried more than is listed. the dns and rpc servers seem to be the main coulprits but how do i fix that? also possibly the norton issue? i've read so many forums i'm seeing triple and everyone seems to suggest the same things. i've tried them so many times (to no avail). i've even changed the network adapters ipv6 and ipv4 adresses to 208.67.222.222 with the alternate. nothing. there has to be something i'm overlooking but what
Recently, i plug in an external hard drive to my laptop running on windows 7 because i need to copy some files from it.After copying the file i ejected the CD/DVD ROM which is also a removable storage instead of ejecting the external hard drive itself.After that i check on my computer and the CD/DVD Rom icon is gone or lets just say missing.I check on device manger and cant find it there either.How can i possibly have it back(the icon) on my computer?
View 2 Replies View Relatedthe CD and DVD dont work
View 3 Replies View RelatedI have my brothers laptop and the laptop is sitting at BOOTMGR is missing, I can get into BIOS. It will not see recovery disk and will not go into safe mode!!!
It is set to boot from CD Rom but does not see the recovery disc. Is there anything that I can do? As I am now stuck
My husband's comp crashed...he had Win7 Os. Recovery did not work! I tried to reintall Win7 got as far as formatting the hard drive. I then reinserted the cd to reinstall and now all I get as far as "Press any key..." I press a key and "BOOTMGR MISSING" press ctrl + alt + del to restart. Of course this doesn't work.I have reset the bios so that cd-rom is the only bootable device. It will not move from the bootmgr missing screen. The cd is a legal bootable copy, the hard drive and dvd player work I have tried them in another comp.System Configuration[CODE]
View 14 Replies View Related
