I've been using my laptop with Windows 7 with an USB to SATA adapter to read files from an XP hard drive. When I put the drive back in the XP tower, XP will not boot anymore and gives me a 7B error. Does Windows 7 alter the files on the XP drive when it reads it?
View 4 RepliesMy Windows DVD Maker no longer shows my DVD drive E as default DVD burner. Instead, I got a "DVD burner not found" error message when I tried to burn a video to DVD.
View 1 Replies View Relatedcannot delete files on sdhc card in windows 7 (can read)
View 6 Replies View Relatedi have an asus m3n72-d mother board with the quad 4 processor have 8 gig of ram on windows 7 it only reads 4 gig of ram why?
View 5 Replies View RelatedDell 755 dual core 1.8, 3 gig ram. I installed Window 7 on the machine, updated the drivers for sound ect. The problems is the CD drive, it can see it read what�s on the disk, when you try to open it, it disappears completely off the machine, it goes out of devise manager, reboot it comes back. If i try to play a music CD it loads the WMP and tries to play you can see it playing, the track bar moves but no sound comes. If I play the in-build music or play the video it plays and I hear the music. I've changed the drive letter as someone suggested still the same. At one point I had my 3g modem in that show up as the CD drive. It must a conflict somewhere, where I dont know. Set it to both 32 & 64 bit configurations its the same on both
View 5 Replies View RelatedMy machine has an "ECS ELITEGROUP A780GM-A Black Series" mother board, AMD Athlon x2 6000 3.1GHz processor, four sticks of 1 Gig Crucial Ballistix 1066MHz RAM, and my OS is Windows 7 Ultimate 32bit.
The system only reads 3 Gigs of RAM, i have tried each slot and each stick of RAM individually and they all work.
What could be the problem?
I am trying to understand the mechanism for this. I encyprted some files in folder on my d drive.I created a virtual windows xp machine. when i navigated to that folder from the xp virtual machine, i was able to open the encyprted files. i thought xp system was independant of the windows 7 sytem
View 3 Replies View RelatedI have been searching for software that I can download to my PC that reads text, PDF , Power points etc. what I mean by reads is it actually reads to me. I wanted this software to read all my readings for school and I can transfer the readings to my MP3 and listen to it when I am on the road.. I spend a lot of time on the road and this causes me to limit my available reading time. So I figured if I could find a software to download...
View 1 Replies View Related2 months ago, I installed windows 7 pro with no problems at all. Fast forward to today, I decided to reformat because the boot would get stuck in the middle of trying to boot into windows, it wouldn't flash the windows logo. I didn't think much of it so I just reformatted. This is where my real troubles began.So I reinstall windows 7 pro with no problems (the boot disk is in there the cd drive the entire time) I install my programs and what not and install my updates. All 100% Fine. Then I take out the boot disk and restart again... and I get this error message saying:
Nvidia Boot Agent 229.0525
Copyright 2001-2005 Nvidia Corp
Copyright 1997-2000 Intel Corp
Client Mac Address: 00 30 1B BC1F59 GUID: 12973077-FFFF-FFFF-FFFF-FFFFFFFFFFFF DCHP....
Then I press escape, then it says this:
PXE-EA0: Network Boot Canceled
PXE-M0F: Exiting Nvidia Boot Agent
DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
So the first time I got this error, I just thought, Oh, something must have happened no big deal, so I reformatted again and again. But I kept on getting the same exact error. It'll load into windows just fine when my install disc is in the cd drive, but when I take it out, that error pops up. *My windows is authentic, each time I have been able to validate my copy.* I have tried installing from my hard drive and from the install disc with same error.*
This is my current set up:
Shuttle XPC SN27P2 (Barebone) Comes with motherboard, PSU, and case.
AMD Athlon 64 X2 5200+ @2.6GHz 65W
PNY XLR8 GTS 250
OCZ Reaper Memory 4GB PC-6400 DDR2-800
WD 74GB Raptor
WD 640GB Internal
WD 2.0TB Internal
WD 1.5TB External
WD 400GB External
Cavalry 1.0TB External
Shuttle 450 Watt PSU
Logitech G15 + MX518 + FuncPad 1030 Blk on Blk
Sony Optirac 18x DVD-/+RW drive
Dual Samsung SyncMaster 225BW 22" LCD Wide Screen Monitors
So how can I get windows to boot up with out having the boot disk in the cd drive...It worked the very first time I installed windows 7 on my PC...
My HP laptop HD crashed, am trying to replace it with a Kingston HyperX 120GB SSD. I do not have Windows installation disks, only have Windows Recovery Disks. All installation instructions I have found for SSD's is for cloning, which I cannot do since the HD is deadI have installed the SSD, booted into BIOS, this simple BIOS version doesn't allow me to change anything on the HD, but it does recognize it and let me do a HD test, so it does recognize the SSD. I then put the Windows Recovery disk in the CD drive, attempted to boot up, but the CD drive just spins and spins but never boots up. I thought the CD drive might be bad, so I tried an external USB CD drive with the Recovery disk, but it does the same (just spins). I even got a new Windows 7 installation disk (from another PC) to see if it will boot from it, but get nothing but a spinning CD I have not done anything yet to the HyperX SSD, haved not formatted or partitioned it.I thought this would be done by Recovery on the OS installationThe BIOS is set up to first boot from the CD drive, so the boot order is not the issue.
View 4 Replies View Relatedis it possible to boot Windows 7 from a usb drive? does the bios support usb booting?
View 1 Replies View RelatedI've just purchased a notebook HP touch smart 13" tm2-2101 sl (the one you can turn the screen and use it like a tablet) without the DVD reader.I want to know if it's possible to create a bootable file to restart Win 7 after a reset of the system on a pen drive USB instead of the DVDs.
View 3 Replies View RelatedI'm not quite sure if I myself can fix this but I've been using my computer for about a year now just keeping the installation disk in the drive.. If I remove it, it will not boot when powered on. It hasn't always done this. When powered on without the disk it says something like "please insert cd or dvd"
View 7 Replies View RelatedI didn't really know if this is the correct forum to ask, but my usb 3.0 drive (Western Digital) is not being seen upon boot into Windows 7 on my homebuilt system. If I plug it into the usb 3.0 port after it is booted, Windows will see it and initialize it, etc, but not if it's alreay plugged in when I first turn on the computer. My comp specs are below.
comp:
ASUS P8P67 mobo (standard, not Pro)
intel i2500k CPU
8 gigs Ram
500 gig WD main drive
ATI vid card (can't remember model off hand)
I have a computer with windows 7 ultimate, it was installed on this computer a couple of years ago when windows 7 first came out.I have a 1TB HDD in my computer that's pretty slow, and I want to upgrade to an SSD boot drive and keep my current drive for data. However I have lost my windows 7 serial key (not the most organized person), so is their a way i can transfer windows 7 off my hard drive to an ssd?
View 1 Replies View RelatedMy Old HDD crashed, it had windows 7 on a D: logical drive with an extended partition (Not sure why/how I ended up with a D: logical drive and an extended partition, it probably happened when I upgraded my windows xp to windows 7 32 bit OR when I upgraded my windows7 from 32 bit to 64 bit, anyways.....). My old HDD also had two other primary partitions which probably had some system files etc,. I do not have a backup of these two primary partitions, however, I do have a paragon backup of my logical drive D: extended partition alongwith a backup of first track (not sure what that means). My old drive is bad. I got me a new HDD, created a new NTFS primary partition with a drive letter C:. I then restoed the paragon backup of my windows D: drive on to this new primary C: partition. Now, I am not able to boot windows 7. Seems like I need to make this new partition bootable and/or make it a system partition. Not sure how to do this. I dont want to install windows 7 from scratch and then load all the software programs.
View 8 Replies View RelatedI have Windows 7 Ult-64 installed on my desktop. I made a USB flash drive with the installation files, so I know I can boot using a flash drive. I would like to be able to boot into Windows 7 using only a flash drive (no hard drives connected). Is this possible?
View 6 Replies View RelatedI cloned my Laptop HDD (120Gb) via Acronis to a 120Gb SSD (Kingston). I checked the SSD after cloning and all the files seem to be there. I replaced the HDD with the SSD and I get a WIndows 7 message Status:0xc000000e and Info: The boot selection failed because a required device is inaccessible.I went to BIOS setup and the Kingston drive was listed as No2 after DVD/CD drive as boot drive. I moved it to No 1 position and tried again. Same result. I googled the issue and others seem to have problems with SSD drive replacements.ANyone got an answer
View 9 Replies View RelatedHow much gb does windows 7 homepremium sp1 take up and could I get away with a 60 gb ssd or should I just go for a 120gb one?
View 9 Replies View RelatedI have a 60gb SSD and two 500gb HDD's. I want to use the SSD as a boot only drive, but I can't seem to figure out how to keep from loading it up with data that I don't want on it. I am wondering if there is a way to keep this from happening. Is there a way to install Windows 7 on the SSD and then sort of lock it up and direct everything else to the two HDD's?
View 5 Replies View RelatedRecently bought a 2tb storage drive and I'm using all 6 sata ports on my mainboard! I've got a 74gb raptor that's got windows xp dual boot with my main os windows 7 though windows 7 is on another drive! I want to remove the dual boot as I don't need windows xp anymore (do I?) the thing is the raptor is my first boot device that gives me the option to boot into windows 7 or xp and if I select the windows 7 as my first device it just comes up with the error can't find boot device so there must be a config file on the raptor 74gb that I need to move to allow me to boot from the windows 7 drive and remove the raptor to use my new drive! Any advice on how I can do this as any software that I could use?
View 6 Replies View RelatedI have a 60gb SSD which I am presently using as my WIndows 7 boot drive, all of my picture documents and prgrams are all located on a separte SATA 2tb drive within my system.
I now wish to upgrade my boot drive as I have run out of memory. Is there a way in which to do this without to that the new SSD drive to be installed will recognise all my preexisting programs and documents on the SATA. I really do not want to to have to uninstall all my programs on the SATA and then re install when I have installed my new SSD boot up drive.
I have a hitachi 2tb 5400rpm drive, with my OS installed on a 500GB partition (100gb free). I just got a 1tb samsung spinpoint f3 which i want to use as my boot drive. I have tried 3 methods: 1. Downloaded clonezilla, and used tuxboot to create a bootable flashdrive with clonezilla. I used the i686 image of clonezilla. I made a partition on the samsung drive which is 10GB larger than the boot partition on the hitachi. 2. I used the windows utility to make a back-up image of my bootdrive. I then made a bootable copy of windows 7 live install on a flash drive. Booted off it and tried to restore from that system image. I got an error: The system image restore failed. Error: Error details: The parameter is incorrect.(0x80070057) 3. Same as method 2, but I used a CD instead. This time, i got this error: System image restore to new drive fails. 0x80042414
View 3 Replies View RelatedI've got a XP Pro laptop I'm about to decommission but I've got programs I don't want to lose. I know there are programs that claim to be able to bring programs over from one machine to another but the results don't live up to the claims. I was wondering if I could take the hard drive out, place it in an enclosure and boot from it on my new Win7 Home Premium laptop when I want to use my existing XP programs. Alternately, I have my old laptop C drive backed up using Acronis. Could I "restore" it to a new partition on my Win 7 machine. I know that certain things like hardware drivers etc. won't work as it, but if the programs worked, that'd be fine with me. The rest could be worked on as needed.
View 4 Replies View RelatedMy PC has the following:
[code]...
Originally I planned to set the two 3TB drives up for RAID1 but when I ran into some problems I decided to instead set one of the 3TB drives as the location for Windows backup (drive "A" for use, drive "B" for backup). However, when I set drive B up for Windows backup whenever Windows 7 boots it takes about 60 seconds longer (it hangs on the "Starting Windows" screen). Both drives are recognized and I'm able to freely transfer data between them, and the problem disappears when I run the clean diskpart command on drive B.Does Windows 7 backup have problems with 3TB drives? I'm still having problems setting up RAID1 either through my motherboard or Windows 7 for these drives (Windows 7 doesn't give me the option to mirror) so at the moment I'm not sure what to do.
To make it short, I want to be able to allocate some of my ram as a drive BEFORE windows 7 boots and of course somehow actually boot windows 7.
View 12 Replies View RelatedI have a windows 7 64 bit system with 2 drives that have OS on them. Every morning it asks me which one to boot to. I choose the first one (the most recent SDD I put in). I did this because I needed more room for the software we use so it is larger than the first. The problem is, when I remove the smaller SDD (that I don't boot to), it will not boot. I've gone into the bios and made sure it is booting to the SDD, it just says loading operating system ........., then, after a minute is says Boot to DVD or USB.
Gigabyte Z68X-UD3H-B3
OCZ Vertex 3 120GB
OCZ Vertex 2 60GB (the one I am trying to remove)
Intel Sandy Bridge 2600k
16Gb Patriot Ram
I have f* up my MBR partition(FAT32, is invalid now) and now W7 won't start. I haveen't made a rescue CD, as my lappy has no CD/DVD drive. Is there a tool to start W7 via USB port?
View 10 Replies View RelatedI have mini dell laptop. The laptop was hit with a bad virus it was wiped out so I am trying to reinstall windows 7 so need to know how to reboot it from a external drive.
View 2 Replies View RelatedI cloned my Laptop HDD (120Gb) via Acronis to a 120Gb SSD (Kingston). I checked the SSD after cloning and all the files seem to be there. I replaced the HDD with the SSD and I get a WIndows 7 message Status:0xc000000e and Info: The boot selection failed because a required device is inaccessible.
I went to BIOS setup and the Kingston drive was listed as No2 after DVD/CD drive as boot drive. I moved it to No 1 position and tried again. Same result. I googled the issue and others seem to have problems with SSD drive replacements.
I lost access to my windows 7 drive (Dual-boot windows 7 & Ubuntu). every time I try to run Windows 7 I get the message: Bootmgr is compressed, Press CTRL_ALT-DEL to restart. I could run Bootrec /fixmbr or diskpart or attrib to rebuild my mbr table through DOS command window using my windows 7 recovery CD. The problem I cannot access drive C: where my windows 7 are. I get the error message: Cannot open volume for direct access or system cannot find the drive path or specified. I still can access all my windows folders and files through home folder in Ubuntu. I don't want to reformat and reinstall windows. Is there is a way to run the DOS commands within Ubuntu
View 3 Replies View Related