I've got a XP Pro laptop I'm about to decommission but I've got programs I don't want to lose. I know there are programs that claim to be able to bring programs over from one machine to another but the results don't live up to the claims. I was wondering if I could take the hard drive out, place it in an enclosure and boot from it on my new Win7 Home Premium laptop when I want to use my existing XP programs. Alternately, I have my old laptop C drive backed up using Acronis. Could I "restore" it to a new partition on my Win 7 machine. I know that certain things like hardware drivers etc. won't work as it, but if the programs worked, that'd be fine with me. The rest could be worked on as needed.
I have mini dell laptop. The laptop was hit with a bad virus it was wiped out so I am trying to reinstall windows 7 so need to know how to reboot it from a external drive.
I'd like to boot a Win 7 laptop from an external hard drive with XP and software installed. Probably use a USB port input from the drive through an adapter. Is it possible to boot XP that way and read and write personal files on the drive? The drive is eSATA and is Windows 7 compatible.
I just restarted my PC and i kept getting erros regarding hardware, at first it would just hold at updating dmi pool , after i reset the bios to fail safe defaults it would then give me the I/O error. I noticed my external drive was turned off and I turned it on and windows booted fine. Is there a connection here i can disable?
Windows is installed on my SSD drive not my external.
What happened to my computer is, I kept getting the BSOD, I went into safe mode, removed the most recent programs I had installed, and it stopped happening. I then proceeded to plug in my external hard drive. It was not recognizing it for some reason, so I went to disk management. It was listed there, just without a drive letter. I tried to assign it a drive letter, and it gave me an error message saying something about refreshing the list, (this is the error message I should have researched), I tried refreshing the drive list, and tried reassigning the drive letter, same message. I right clicked on the drive again, and I saw mark as active. For some stupid reason, I clicked on this. Then seeing that it didn't do anything, I thought maybe restarting the computer would maybe do the trick. Now my computer won't boot.
It gets to the windows logo, and boom, restarts all over again. I tried many things like, startup repair, system restore, marking partition as active CMD, with diskpart, I also tried some of the commands in bootrec.exe. By the way, if this helps at all, my hard drive is a solid state drive, I also have a slave drive in there which does also have a copy of windows installed on it, (it was my old hard drive), I tried setting that as my primary boot and it boots into my old install of windows, before i got my solid state drive. Is there a way I can fix the startup by having access to it from an operating system instead of the recovery environment?
Can I boot my Windows 7 or XP PC into a USB mode where the computer can be used simply as an external USB drive? Mac has this feature and it can be very convenient for large file transfers.how do I connect two PC to swap the files. Win 7 to XP?
Is it possible to dual boot windows 7 and ubuntu, with ubuntu on a external hard drive? I can connect my external hard drive via USB 2.0, USB 3.0 or E-SATA. I want windows 7 as my main OS.
I have a Dell Inspiron 1545 (2.5 years old). All my data is backed up so I have no concerns about recoverying data.First, the laptop crashed and ran several chkdsk on start up. I froze several times during this. It said it had fixed some errors then started up again.This time it wanted to do start up repair. Same thing kept happening, froze at least twenty times during this. Eventually it gave me the blue screen of death.
'Technical information *** STOP: 0x000000F4 (0x0000000000000003, 0xFFFFFA8004C1D260, 0xFFFFFA8004C1D498, 0xFFFFF8000130DDA0)'
This repeated several times. I ran the diagnostics and it told me the hard drive could not be found (error code 0146, 2000-0146). Essentially, it's a Dell laptop (I know) and I am not bothered about recovering the hard drive.I would, however, like to install Windows 7, or alternatively Linux, onto my external hard drive. But I just can't seem to get it to work.I have extracted a Linux iso to the external hard drive I want to install on, onto a cd, onto a FAT32 8gb usb stick, but it has given me the bootmgr is missing error every time. I have tried it with the interal HDD in and removed.I am no longer concerned about the internal HDD, i can use it for a door stop for all I am concerned, I just want to load ANY os onto my external hard drive so I can get the laptop working.
We just bought a WD 2TB My Book Elite external hard drive. When we boot the computer into Windows 7 and plug in the USB cable, the drive is recognized and assigned a drive letter. Everything looks normal--we can access the drive, read files on it, copy files to it, etc. However, next time we power up the computer, if this drive is attached, the computer won't boot. The Dell BIOS splash screen comes up and sits there for a while, then the screen goes black--and absolutely nothing else happens. If we then disconnect the drive and start the computer again, it boots normally. The external drive has the latest firmware and software installed, and we have the most current BIOS installed.
I've just got a new HP laptop with windows 7 Home Premium.
Anytime Upgraded to Ultimate.
i want to boot to windows XP (SP2) on this new laptop..(Not necessarily Dual-Boot). there is only on program i need to use under XP.
the dual-booting tutorials here are quite in depth and potentially problematic for none techie like me. i would prefer not re-partion the drive and 'hide' one operating system from the other, so what i would prefer to do is this...
1. Plug in an External hard drive (USB 2.0).Clean and factory formatted.
2. Go into my BIOS > Disable boot from internal hard drive > enable boot from CD Drive (first)
3. Exit BIOS having saved changes
4. insert win XP Install disk in drive.
So, in theory XP Install should be like on a brand new machine.
when i want to use windows 7 i would reverse the BIOS changes and make sure external drive with XP is not connected.
So, windows 7 would not know XP is even in use.
Is all this viable... or is there something that would prevent it from working?
I am planning to move to another country and do not want to transport my desktop Win XP system.If I were to buy a new laptop maching can I set up the hard drive from my desktop, as an external device,so that the new laptop can boot from that external drive? My XP drive is SATA.I really did not know how to categorize this question so I Windows 7, assuming the new laptop would have that OS.
I have a Dell Inspiron 1440 laptop with Windows 7 Home Premium 64bit. Some of my older applications do not support this platform. My processor does not support Window Virtual PC and Windows XP mode so I was hoping to add XP as a dual boot. Is it possible to boot XP from an external harddrive or USB instead of having to partition the internal hard drive. Or do you have any suggestions on how I can load XP after Windows 7 is already loaded.
I have windows 7 with a Verbatim 1TB external drive, the system is not recognising the external drive. When I switch it off and back on again it then recognises it and loads it in My Computer. I have another external USB drive which works just fine. This problem started after I formatted the PC and reinstalled windows 7. It worked fine before under the same OS. I tried another wire and plugged it into another port but still have the same problem.
can I dual boot using an ext. Hard drive. I found an old 250gb phanton hd I've never used. Figured I could throw it in there. Would vista dual boot to that. Or no??
One of my Dell systems took a dive (no power, etc.) so I pulled out the hard drive and hooked it up to this Dell Vostro 260 so the person could have access to their files. I've checked the BIOS to boot from it, but nope, doesn't work. The system goes black, little cursor for a moment then asks me if I want to run repair to start normally. I've tried repair and normally but still can't boot from this external. The system does see it, so I'm really not sure what to do
My Acer netbook has developed some kind of fault and I am unsure as to what I ought to do. The netbook does boot to BIOS and also will boot up from an external drive...but will not boot normally. I am thinking of replacing the hard drive but don't know if there could be something else wrong. It says sometimes that it can't read it and from this I am not sure if there is something else wrong. If I change the drive does it sound as though things will work? There are also a couple of other intermittent faults such as certain letters and numbers not working and then everything is fine for a while...
I had an issue where Windows 7 would not boot anymore, getting error, BOOTMGR missing, Press Alt-Ctrl-Del to restart. I have tried to repair with windows disk but still getting error. I have decided that I want to just do a reinstall but I want to get on and export my favorites and grab a couple other things. I used to have a CD that I could use to boot up with (Think it was called Barts Boot Disk, Been too long) to get into Windows XP and do a couple things. My question is, is what is the best boot disk that will allow me to copy files from the HD to my external drive before I refresh?
.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
my desktop computer won't boot. When I turn it on it displays the welcome splash screen and then goes black. A message will then display that says CMD failed to start and then it will shut down. It does the same thing in safe mode as well.My question is. I have already set up the HD from the desktop as an external to my laptop so I could get files off it. Is there any way to do system restore on the hard drive when it is set as an external? Because I did this last night and I think if I restore the drive it will fix it.
I have a USB external hard drive that I keep all my documents etc on (had it for years)I upgraded from Vista Home to & Home Premium then had to upgrade recently to Professional to run my Sage. Through all these upgrades my ext. drive ran fine. Occasionally the drvie letter would change if I had something else plugged into the USB, this was always easily corected in disk management by changing the drive path.The connection on the case packed up so I had to get the drive put into a new case, now when I plug it in the drive is assigned G instead of F, I tried to change the drive letter allocation in Disk Management but it won't let me as the program still thinks I have a second ext. hard drive which is labelled F. I suspect this has happened because when the usb connection broke the drive was disconnected suddenly instead of a proper eject.How do I get Disk Management to remove the inactive drive - i can't find any obvious way - eject, delete etc are all missing when I click on tools or tasks.
i`ve saved alot of my files i had on my previous os (xp pro) on my expansion external drive. now i`m running on windows 7 i can not access the drive as it says it needs formatting. i`ve looked in disk manager and it is showing RAW. i really need these files and they are they only back up i have. i wouldv`e thought it would have been a simple install but it`s proving very different. my expansion drive is a seagat 1TB.
Why do files moved to an external drive not behave the same as those same files in an internal drive? I noticed that if I do anything to a file that is in an external drive, that file can not be saved under the same name (read only). In order to do so one must save it internally and then copy or move it to the external drive.So I did just that--I copied a file from taken from an external drive, saved it in the internal one and then copied it back to the external one. Now if I r-click the propeerties of these 2 same files and then go to the 'Security' tab a difference is immediately apparent: The internal one has -1- System & -2 My-computername (user-PCuser and -3- Administrators (user-PCAdministrators) with all 3 accounts allowing all (full control, read, write, etc..). While the external drive has in Properties; -1- System -2- Administrators (user-PCAdministrators) and -3- Users (user-PCUserrs) with this final 3d one (and different one) with no Allow for "full control, or modify or write. So how does one have all its files in this external drive behave and be equal to all the same files in the internal drive?Since -3- Users (user-PCUserrs) in the external drive is that which is differnt from the internal drive I was wondering if it is OK to delete this Permission or 'attribute' or whatever it is called and create instead one equal to the one in the internal drive -3- Administrators (user-PCAdministrators)? ANd of course doing so in one go and not file after file after file individually?
Why do files moved to an external drive not behave the same as those same files in an internal drive? I noticed that if I do anything to a file that is in an external drive, that file can not be saved under the same name (read only). In order to do so one must save it internally and then copy or move it to the external drive. So I did just that--I copied a file from taken from an external drive, saved it in the internal one and then copied it back to the external one. Now if I r-click the propeerties of these 2 same files and then go to the 'Security' tab a difference is immediately apparent: The internal one has -1- System & -2 My-computername (user-PCuser and -3- Administrators (user-PCAdministrators) with all 3 accounts allowing all (full control, read, write, etc..). While the external drive has in Properties; -1- System -2- Administrators (user-PCAdministrators) and -3- Users (user-PCUserrs) with this final 3d one (and different one) with no Allow for "full control, or modify or write. So how does one have all its files in this external drive behave and be equal to all the same files in the internal drive? Since -3- Users (user-PCUserrs) in the external drive is that which is differnt from the internal drive I was wondering if it is OK to delete this Permission or 'attribute' or whatever it is called and create instead one equal to the one in the internal drive -3- Administrators (user-PCAdministrators)? ANd of course doing so in one go and not file after file after file, individually, would be ideal.
I am running Windows 7 Pro. Have a external dual dock connected to a estata port. One of the drives assigned letter K often comes up as E and I have to change as application is looking for K. Another disk in this dock works fine. No problems. why this might be happening or anyway to prevent? Seems like when I go to disk management and assign K it should stay that way.
i got a new processor, the o.c software and teh bios filed to set on auto, so i had to do it manually..over and over and over and over again. around 8 am i started to tweak the setting on the o.c software and in my slep deprived state i did something very stupid..i set the o.c software to load the last setting on startup.afterward i hit a setting the crashed the computer, so now i can't boot it, cuase the o.c software is loading those com crashing setting on startup. so i when to use a back up harddrive which was empty, so i am now using teh computer with a fresh hdd. the other hardrive is as it was when i screwed up royal.all ihave to do is load internal harddrive on my external hdd dock, in a virtualized environment which i looked for help threw google, which lead me to virtual box..which was 3 hours of wasted time, then i ran another search which lead me here eventaully, which referred me VMware, so i went to VMware only to find a god awful amount of crap i don't need and getting support from them was a joke, put in a ticket and await..wait..wait..wait, two hours later , i come back here. i had no idea what api from VMware to go and get most of it seems like its meant for servers, and im not running a server.i have a hdd thats good, in a external dock, i can load its internal working threw my computer, but i need it virtaulized in order to uncheck that box in the o.c software so it doesn't load on startup, thats it >.<
I am having difficulty getting my computer to install Windows 7 from an external hd. take a look through the steps I followed below, I believe I may have missed something very basic (I'm not a power user).
1.I put an iso image of windows 7, 32bit onto my computer
2.downloaded/installed 'easeUSpartition master'; used it to shink the partition w/with data on external hd, created a new partition of the free space remaining on the hd; set new partition as 'active'.
3.used magic iso to extract files from the iso image of windows 7 32 bit installer onto the active partition that was created from the free space on the external hd.
4.reset computer, on startup went into bios, set USB flash drive to #1 position of boot order, set setting to 'enable boot from external drive', saved and exited.
5.on subsequent restarts, the computer restarts as it normally does, I do not see any messages during startup (e.g. 'push any key to boot from external drive').
I only have an external firewire dvd drive and wondered if there's a way i can install Windows 7 from it. I don't want to overwrite my current XP installation and lose my programs and settings, so would like to install it onto a sepatate hard drive.
I have a Windows 7 machine with external drives. I bought a new machine, also with Windows 7. When I moved the external drives over I can't see the folders. I thought the drive might be damaged so I moved them back to the original machine and I can see the folders. Why can't I see the folders on the external drive with the new machine?
