I have a Windows 7 64bit host that points to a HP 2035 printer connected to a HP175x jet direct print spooler. Every time I print a document from any program the print que continualy resubmits te job when it has completed causing the printer to print multiple copies and will not stop until i cancle the print job in the que. I have verified that I only want 1 copy and have tried this from multiple programs, Word, Notepad , IE ect. I did intall the most current driver for the printer and OS. No change.
I've been using various print drivers for various locations with success for a month with my new laptop. Today, all drivers gone.Loading new ones doesn't work. Print spooler is not "started;" it starts successfully, then is not "started" next time I look.Other possibly relevant information: HP 1020, HP MX 340 at home office.Tried: multiple restarts of print spooler, multiple reboots, troubleshooters, HP detect and download drivers?
(Windows 7 Home Premium 64-bit, HP LaserJet CP1215)When printing from Word (or any other normal application) the documents just sit in the print queue with Status = "Error - Printing".If I stop, then re-start the Print Spooler service, they then print.Strangely enough, this does not happen if I print from the HP printer diagnostic utility.I've done complete re-install of the entire printer driver suite and I'm pretty sure everything that end is OK. So what's happening with the spooler? The error message isn't exactly very revealing
I only want to print pages 13-17 but it prints 1-10
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit Processor: Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz, Intel64 Family 6 Model 37 Stepping 5 Processor Count: 4 RAM: 3893 Mb Graphics Card: Intel(R) HD Graphics, 1722 Mb Hard Drives: C: Total - 79899 MB, Free - 3595 MB; D: Total - 396937 MB, Free - 86756 MB; H: Total - 99 MB, Free - 60 MB; Motherboard: Hewlett-Packard, 1425 Antivirus: Microsoft Security Essentials, Updated and Enabled
I have a new computer with Windows 7. As of yesterday the print spooler keeps crashing. Of course the user cannot print.I can restart the spooler, but it crashes when trying to print or trying to open a printer.
It has been a while since I have been here. I am sure my PC has some hidden Registry problem, but I cannot find it. Hardware: HP 8440P, Windows 7 64 bit.
MacAffee found no viruses, but of course my kid was playing on the machine and I am sure he clicked "yes" on some webpage.
The Registry for the Print Spooler keeps shutting down. When I attempt to print from Micorsoft Word, it shows my HP1018 printer as not really being a printer. I checked the Print Spooler and attempted a restart. It restarts fine, but then when I attempt to print from Word (or any MS office program) the Print Spooler shuts down. Same is true with adobe acrobat reader.
My guess is something corrupted the Registry to screw with me.
I am facing Print Spooler Services Stopped in Windows 7 and i'v done all the possibilities with win 7 like manually starts services many times but it again gets stopped.
clean its registry but not resolved applying some patches but not resolved install all updates of win 7 but not resolved delete SPOOLER folder;s file but not resolved
It always prompting me the popup windows " No printer found or print spooler services not running"
I have a Konica Minolta bizhub c250 connected to a linksys router, up until about a week ago everything worked fine, how ever all of a sudden the windows 7 machine (desktop) i use to print to the bizhub suddenly stopped printing from the internet and mS office 2010, however it still printed pictures just no text, and if the .doc was text only it just printed 3 thin black lines two at the top and one at the bottom. Whats odd is that test pages print fine from said computer, Notepad prints text just fine, but i can not get the machine to print text from ms office 10 or anything off the internet, even after a reinstall, i can print to the bizhub just fine from ms office 2010 on 3 laptops running windows 7 on 2 and vista on 1, it was odd however, a file made on affected desktop when transferred to the vista laptop the laptop began displaying the same peculiar problem, i have run: malwarebytes, spybot search and destroy, ccleaner, AVG, comodo antivirus, nod 32, esset online scanner, combofix... several others ... and i ran hijack this and went over the log with a fine tooth comb and found nothing out of ordinary operating.
I have done everything that windows has asked and still can't get it to work. I have a windows 7 printer but since I can't keep the spooler running it won't let me install it. I have tried manually and using the fix it program but all that does is restart the service and it will stop on it's own.
I have the same problem with my print spooler, my computer is only 2 mo. Old, hp, can't help me, staples can't help me, i have a warranty on the printer & computer but of course that isn't covered. I don't know what to do .
My PC, running 64bit Windows 7 is printing blank pages on the work computer. I downloaded the necessary drivers needed to print from this computer to the printer, which is a CanonMX 340. The computer recognizes the printer and will print, but the pages that it prints are blank. The pages are blank whether I'm printing from the internet, a saved .jpg file or even a .pdf file. In order to connect to the printer, I plug in an ethernet cable, still nothing works.
I have a laptop running Win 7 32-bit. I configured a network printer, which is an HP Deskjet 720 that is connected to an XP machine and shared. That worked fine. But I just purchased a new 64-bit desktop, and I can't print to that network printer. I can install the printer, and the status shows it's available/ready. But when I try to print a test page, nothing happens. When I check the document status, I get a message saying that the print spooler needs to be started. I've restarted it several times, but it still doesn't work. I've searched the forum and Googled this problem. Lots of users seem to have this same issue. I've tried all suggestions, but nothing works. The spooler is set to automatically start, and the restart time after error is zero. I decided that I'd try replacing the printer driver. But when I go into Control Panel and look at printer properties, the Advanced tab where I should be able to update the drive is all grayed out. So I'm stuck.
I have a customer with a Win7 Pro 32-bit PC that has had a HP Deskjet D2660 on it for 1yr that has been printing. They got a virus and used Malwarebytes to remove it. Now, the printer shows up as needing troubleshooting and will not print. The local print spooler starts, runs about 20 sec. and stops. I have uninstalled and reinstalled the printer.
I am using a Windows 7 Home premium (x64) laptop and a Canon MP560 printer. Anytime I try to print from my laptop to my printer (through a wireless network), an error pops up which reads: "Windows cannot connect to the printer. The local print spooler service is not running. Please restart the spooler or restart the machine." Sometimes, the printer disappears from my computer (I don't delete it, it just vanishes) and when I try to add printer I get the message: "Windows can't open add printer. The local print spooler service is not running. Please restart the spooler or restart the machine."I know it is not a problem with the printer as my husband's laptop is printing fine. Also, if I right click on the printer and try to print a test page from my computer it prints perfectly fine. However, I am unable to print anything from MS Word or the internet.
I have tried:
- System restore, twice.
- Manually starting the print spooler (in Services) but it stops running as soon as I send anything to print.
- Deleting and reinstalling the drivers for the printer.
Today on start up, noticed the machine was a little sluggish, but after a short while appeared to be normal. I tried to print a document and Windows 7 said that I had no printers installed? Looked at the Devices and Printer screen and only two were there with yellow triangles. Tried to do a printer install, Windows 7 said the spooler was not running. Went to services and enabled the print spooler, the printers showed back up on the D&P screen, initiated a print and same response. P&D screen showed no printers, did the enable of the spooler still no luck. Tried a reboot, same problem, did a recovery back a couple of days, it was successful but problem still remains after a print command. Did the normal virus scan, malware thing, now I am stumped. I remember several months ago 10-12 that I had to go into the registry and change something with this exact behavior, but that remedy escapes me now.
New computer build with fresh install of Windows 7 (64) on formatted hard drive. I have no printers installed and am allowing window to download all updates. I can't install any printers as windows print spooler service is not loaded. If I go to services, and attempt to start the service, I get an error message that says "Windows could not start the Print spooler service on Local Computer" "Error 1053; The service did not respond to the start or control request in a timely fashion".
All dependant services are loaded and running. I have restored the computer to an earlier point and was able to determine the spooler services are running. I continue to allow updates and at some point the service becomes corrupted again. I check in services.msc after every restart. I can't seem to figure out what's corrupting the spooler service. I've even gone as far as to re-install a system image created just after all motherboard divers where installed. The service appears to be working fine and during the process of doing Windows updates,after a random restart, it's not working again. Once it stops working it never comes back until I do a system restore.
I just tried to print, only to find out the printing menu from MS word wasn't opening. I checked the print spooler service, and it's stopped. When I try to start it, I get the error 1503 message.
I've tried the following:
- Manually start it. Made sure the RPC service is running (yes it is) - System restore to a date I believe it worked - sfc /scannow (doesn't find anything) - some other cmd command which had "= rpcss" in it - Some said .NET update may do something, didn't
I saw something else about renaming .mui to .exe and the original spooler .exe to .bak. Tried that and the service just reported it couldn't find the files, so I reverted that.I can't recall off the top of my head what the files names specifically are, but the two files that are the spooler (spoolersv.exe and spoolersv.exe.mui?) are within the correct directory in Windows. I really am at a lost, and classes started this week for me so I'm drained right now... its tunneling engine service would do the same thing (error 1503 out of nowhere), so I had to reinstall that and add something in its registry directory. Easier using that for Sven Coop and Synergy Coop?
Three days ago when I tried to print from the web and then WORD there was no installed printer. I checked and the printer was still installed but when printing a document the print screen said their was no printer installed. I checked and the print spooler was not working. So I downloaded the Microsoft toolMicrosoftFixit.Printing.Run.exe. I ran it and presto the printer worked but only once and when I went to print again, again the print box showed that there was no printer installed. So I have to run the Microsoft.Fixit.printing.run.exe tool every time I want to print a page then restart the computer. A royal pain and time waster.
Something is turning the spooler off and not allowing individual programs to see the installed printer and therefore reports that there is no installed printer.2nd issue. this is a new laptop (ACER) and there is no LED light to show "Caps Lock". I did find a setting that flashes the screen and makes an audible beep. However, my wife has the exact same computer and hers has a 2" x 2" box appear each time she puts cap Lock on. Which is way less distracting than audible beeps and flashing screens. Is there a setting for this? I have not found one in the Microsoft website for Windows 7.
I recent purchased a a new computer with Windows 7 Home Premium x64 and a Canon MG5220 Inkjet All-in-One printer. I have setup printer to be wireless (no problems). When I run the setup disk to start downloading the drivers, etc. I get the message that the Print Spooler Service stopped and to restart the computer. I have done that several times. Every time have to restart the spooler in the print spooler properties only to have have it stop a few seconds later when I try to re-run the setup disk. I have deleted the files in the printer and driver files under windowssystem32spoolerdrivers. There is a file called color in the driver filer. I have cleaned up the registry. I have tried the Window Fix.
I have my printer installed in my work domain PC. I try to print one page, and then after this my print spooler stops working. I have to start it manually, and after another page printed, it stops again. It's so annoying to start it after each print.
My brother has an HP p6823w and a Canon MP495 Printer. Every time he clicks on a link in AIM or Skype, his pc open up his Print Options page as though he had hit Ctrl+P. Other program such as Ventrilo, do nothing when links are clicked. I cannot find anything at all about this on google.
Using Windows 7 and Word, each request to print delivers only the test page. A request to print e-mail also results in printing the test page only. Have disconnected and uninstalled the 812C and then reconnected (USB) and reinstalled the driver. Same result. Only the test page prints.
I'm running Windows 7 home premium (SP1) on a brand new Asus U36SD. I did my usual thing of uninstalling some useless bundled software & ad-ware like games etc. and then just running windows update on the system. I noticed the problems a while after installing both Firefox and VLC, as I hadn't really had to use explorer prior to that.
So first I was afraid it was a virus, but Kaspersky's free to use virus scanner cleared that fear. The next thing I tried was ShellExView, and used it to turn off all the non-MS context menu handlers. It didn't help at all. So I tried to use the registry fix by Andre Ziegler, and it went into the registry all right, but I don't get any dumps. So that's not working out.
System restore doesn't want to function, as it claims I have anti-virus software installed, which I don't, as I've removed the free Kaspersky's software. The computer is without an optical drive, so reinstalling the system would be quite a pain, and seeing as I've not really done anything significant to it yet (I hope), I don't see how it would really help me.
Or how to get the dumps to actually show up? I'm really in a bind, since the crashing is constant and it's basically rendering the laptop useless.
I'm running Windows 7 Home Premium on a Dell Inspiron N7010. My system restore points are continuously deleting somehow. I have created restore points manually and I have seen the occasional restore point created from system updates. I will then check back after about an hour or so and the restore point is no longer there! I found that my volume shadow copy service was stopped - I restarted it and set it to auto start. I have system protection set to restore system settings and previous versions of files and have 1.46GB set aside for restore points. I have had it set as high as 2.93GB. I have my laptop set to go to sleep when I close the lid, so I'm wondering if that may be an issue.
My computer won't restart, on boot up it won't get past the light blue welcome screen, and mostly stops suddenly before that almost like the power cord has been pulled out.
If I try to run from the CD to make repairs (original cd) the same thing happens right at the point files have finished loading from cd, it black screens and restarts.It will (sometimes) let me start in Safe Mode, but again will black screen and restart if I try any kind of repair - system restore.
Windows server 2003 reboots very often. On 30th Dec alone rebooted 10 times.Found only in Device manager for Display Adaptor its whowing in Yellow Mark for Intel Q965/Q963 Express Chipset Family. Is this could be any cause for reboot.Will drivers installations can resolve it?
My pc, which is running Windows 7, is continuously booting to repair mode and 9 times out of 10 just boots to a black screen with mouse cursor at which point I have no option but to do an illegal shutdown. I have tried to run a system restore but an error message 'an unspecified error occurred during system restore (0x80070002)' keeps popping up. On the occasion it gets through to the desktop it says that it was successful. Next time I shut down and go to reboot I have the same problems. Also when I go to the internet the homepage has defaulted [URL] which looks similar to google but without the banner.
I dont think this is malware but possibly a critical windows update that has corrupted. If I get to desktop and then shutdown there are 11 updates that are downloading but on reboot the you can see that the updates are loading properly. The only thing I have changed recently is I have updated the printer drivers. For no reason, all of a sudden the other day the printer stopped working and once I updated drivers it was fine. This pc has worked fine for months until the latest set of updates came through. On further reading it looks like searchnu is malware. Could updating a driver really have installed this.
i have a Toshiba laptop running win 7 I'm on a network where the printer is plugged into a desktop running win XP via a USB cable. If I print using the network printer from the laptop i get blue and pink lines where black should be.I have not tried to print a picture so i don't know the results of that.
