I have my printer installed in my work domain PC. I try to print one page, and then after this my print spooler stops working. I have to start it manually, and after another page printed, it stops again. It's so annoying to start it after each print.
View 3 RepliesI have a customer with a Win7 Pro 32-bit PC that has had a HP Deskjet D2660 on it for 1yr that has been printing. They got a virus and used Malwarebytes to remove it. Now, the printer shows up as needing troubleshooting and will not print. The local print spooler starts, runs about 20 sec. and stops. I have uninstalled and reinstalled the printer.
View 4 Replies View RelatedTrying to print a statement but comes back to local print spooler service, but I can print my emails.
View 1 Replies View RelatedI recent purchased a a new computer with Windows 7 Home Premium x64 and a Canon MG5220 Inkjet All-in-One printer. I have setup printer to be wireless (no problems). When I run the setup disk to start downloading the drivers, etc. I get the message that the Print Spooler Service stopped and to restart the computer. I have done that several times. Every time have to restart the spooler in the print spooler properties only to have have it stop a few seconds later when I try to re-run the setup disk. I have deleted the files in the printer and driver files under windowssystem32spoolerdrivers. There is a file called color in the driver filer. I have cleaned up the registry. I have tried the Window Fix.
View 3 Replies View RelatedThree days ago when I tried to print from the web and then WORD there was no installed printer. I checked and the printer was still installed but when printing a document the print screen said their was no printer installed. I checked and the print spooler was not working. So I downloaded the Microsoft toolMicrosoftFixit.Printing.Run.exe. I ran it and presto the printer worked but only once and when I went to print again, again the print box showed that there was no printer installed. So I have to run the Microsoft.Fixit.printing.run.exe tool every time I want to print a page then restart the computer. A royal pain and time waster.
Something is turning the spooler off and not allowing individual programs to see the installed printer and therefore reports that there is no installed printer.2nd issue. this is a new laptop (ACER) and there is no LED light to show "Caps Lock". I did find a setting that flashes the screen and makes an audible beep. However, my wife has the exact same computer and hers has a 2" x 2" box appear each time she puts cap Lock on. Which is way less distracting than audible beeps and flashing screens. Is there a setting for this? I have not found one in the Microsoft website for Windows 7.
I created some Christmas cards with music thru embedded midi files and could view and hear everything until today. Now when I try to viiew one of them, or go to any site that uses WMP for midis, I get an error message that IE has stopped working and will notify me of a solution. If I remove the midi file from the page, then the page functions properly. I went to my "Manage Add-Ons" and WMP is enabled. What else can I do?
View 2 Replies View RelatedI've been using various print drivers for various locations with success for a month with my new laptop. Today, all drivers gone.Loading new ones doesn't work. Print spooler is not "started;" it starts successfully, then is not "started" next time I look.Other possibly relevant information: HP 1020, HP MX 340 at home office.Tried: multiple restarts of print spooler, multiple reboots, troubleshooters, HP detect and download drivers?
View 5 Replies View Related(Windows 7 Home Premium 64-bit, HP LaserJet CP1215)When printing from Word (or any other normal application) the documents just sit in the print queue with Status = "Error - Printing".If I stop, then re-start the Print Spooler service, they then print.Strangely enough, this does not happen if I print from the HP printer diagnostic utility.I've done complete re-install of the entire printer driver suite and I'm pretty sure everything that end is OK. So what's happening with the spooler? The error message isn't exactly very revealing
View 9 Replies View Relatedmy pc is now showing printer and if I am reinstalling even then they are showing that there is problem with spooler
View 2 Replies View RelatedI have a laptop running Win 7 32-bit. I configured a network printer, which is an HP Deskjet 720 that is connected to an XP machine and shared. That worked fine. But I just purchased a new 64-bit desktop, and I can't print to that network printer. I can install the printer, and the status shows it's available/ready. But when I try to print a test page, nothing happens. When I check the document status, I get a message saying that the print spooler needs to be started. I've restarted it several times, but it still doesn't work. I've searched the forum and Googled this problem. Lots of users seem to have this same issue. I've tried all suggestions, but nothing works. The spooler is set to automatically start, and the restart time after error is zero. I decided that I'd try replacing the printer driver. But when I go into Control Panel and look at printer properties, the Advanced tab where I should be able to update the drive is all grayed out. So I'm stuck.
View 9 Replies View RelatedI have a new computer with Windows 7. As of yesterday the print spooler keeps crashing. Of course the user cannot print.I can restart the spooler, but it crashes when trying to print or trying to open a printer.
View 7 Replies View RelatedIt has been a while since I have been here. I am sure my PC has some hidden Registry problem, but I cannot find it. Hardware: HP 8440P, Windows 7 64 bit.
MacAffee found no viruses, but of course my kid was playing on the machine and I am sure he clicked "yes" on some webpage.
The Registry for the Print Spooler keeps shutting down. When I attempt to print from Micorsoft Word, it shows my HP1018 printer as not really being a printer. I checked the Print Spooler and attempted a restart. It restarts fine, but then when I attempt to print from Word (or any MS office program) the Print Spooler shuts down. Same is true with adobe acrobat reader.
My guess is something corrupted the Registry to screw with me.
I am using a Windows 7 Home premium (x64) laptop and a Canon MP560 printer. Anytime I try to print from my laptop to my printer (through a wireless network), an error pops up which reads: "Windows cannot connect to the printer. The local print spooler service is not running. Please restart the spooler or restart the machine." Sometimes, the printer disappears from my computer (I don't delete it, it just vanishes) and when I try to add printer I get the message: "Windows can't open add printer. The local print spooler service is not running. Please restart the spooler or restart the machine."I know it is not a problem with the printer as my husband's laptop is printing fine. Also, if I right click on the printer and try to print a test page from my computer it prints perfectly fine. However, I am unable to print anything from MS Word or the internet.
I have tried:
- System restore, twice.
- Manually starting the print spooler (in Services) but it stops running as soon as I send anything to print.
- Deleting and reinstalling the drivers for the printer.
Here are the event properties if this is helpful:
Faulting application name: spoolsv.exe, version: 6.1.7600.16661, time stamp: 0x4c6f61fe
Faulting module name: CNMN6PPM.DLL, version: 2.6.0.150, time stamp: 0x49d5bfef
Exception code: 0xc0000005
Fault offset: 0x00000000000256b2
[code]....
Today on start up, noticed the machine was a little sluggish, but after a short while appeared to be normal. I tried to print a document and Windows 7 said that I had no printers installed? Looked at the Devices and Printer screen and only two were there with yellow triangles. Tried to do a printer install, Windows 7 said the spooler was not running. Went to services and enabled the print spooler, the printers showed back up on the D&P screen, initiated a print and same response. P&D screen showed no printers, did the enable of the spooler still no luck. Tried a reboot, same problem, did a recovery back a couple of days, it was successful but problem still remains after a print command. Did the normal virus scan, malware thing, now I am stumped. I remember several months ago 10-12 that I had to go into the registry and change something with this exact behavior, but that remedy escapes me now.
View 2 Replies View RelatedNew computer build with fresh install of Windows 7 (64) on formatted hard drive. I have no printers installed and am allowing window to download all updates. I can't install any printers as windows print spooler service is not loaded. If I go to services, and attempt to start the service, I get an error message that says "Windows could not start the Print spooler service on Local Computer" "Error 1053; The service did not respond to the start or control request in a timely fashion".
All dependant services are loaded and running. I have restored the computer to an earlier point and was able to determine the spooler services are running. I continue to allow updates and at some point the service becomes corrupted again. I check in services.msc after every restart. I can't seem to figure out what's corrupting the spooler service. I've even gone as far as to re-install a system image created just after all motherboard divers where installed. The service appears to be working fine and during the process of doing Windows updates,after a random restart, it's not working again. Once it stops working it never comes back until I do a system restore.
I just tried to print, only to find out the printing menu from MS word wasn't opening. I checked the print spooler service, and it's stopped. When I try to start it, I get the error 1503 message.
I've tried the following:
- Manually start it. Made sure the RPC service is running (yes it is)
- System restore to a date I believe it worked
- sfc /scannow (doesn't find anything)
- some other cmd command which had "= rpcss" in it
- Some said .NET update may do something, didn't
I saw something else about renaming .mui to .exe and the original spooler .exe to .bak. Tried that and the service just reported it couldn't find the files, so I reverted that.I can't recall off the top of my head what the files names specifically are, but the two files that are the spooler (spoolersv.exe and spoolersv.exe.mui?) are within the correct directory in Windows. I really am at a lost, and classes started this week for me so I'm drained right now... its tunneling engine service would do the same thing (error 1503 out of nowhere), so I had to reinstall that and add something in its registry directory. Easier using that for Sven Coop and Synergy Coop?
I am facing Print Spooler Services Stopped in Windows 7 and i'v done all the possibilities with win 7 like manually starts services many times but it again gets stopped.
clean its registry but not resolved applying some patches but not resolved install all updates of win 7 but not resolved delete SPOOLER folder;s file but not resolved
It always prompting me the popup windows " No printer found or print spooler services not running"
I have a Konica Minolta bizhub c250 connected to a linksys router, up until about a week ago everything worked fine, how ever all of a sudden the windows 7 machine (desktop) i use to print to the bizhub suddenly stopped printing from the internet and mS office 2010, however it still printed pictures just no text, and if the .doc was text only it just printed 3 thin black lines two at the top and one at the bottom. Whats odd is that test pages print fine from said computer, Notepad prints text just fine, but i can not get the machine to print text from ms office 10 or anything off the internet, even after a reinstall, i can print to the bizhub just fine from ms office 2010 on 3 laptops running windows 7 on 2 and vista on 1, it was odd however, a file made on affected desktop when transferred to the vista laptop the laptop began displaying the same peculiar problem, i have run: malwarebytes, spybot search and destroy, ccleaner, AVG, comodo antivirus, nod 32, esset online scanner, combofix... several others ... and i ran hijack this and went over the log with a fine tooth comb and found nothing out of ordinary operating.
View 7 Replies View RelatedI have a Windows 7 64bit host that points to a HP 2035 printer connected to a HP175x jet direct print spooler. Every time I print a document from any program the print que continualy resubmits te job when it has completed causing the printer to print multiple copies and will not stop until i cancle the print job in the que. I have verified that I only want 1 copy and have tried this from multiple programs, Word, Notepad , IE ect. I did intall the most current driver for the printer and OS. No change.
View 3 Replies View RelatedAll of a sudden I am getting an error that the print spooler is not running out of the blue. The printer had been working up to then?
View 1 Replies View RelatedI have done everything that windows has asked and still can't get it to work. I have a windows 7 printer but since I can't keep the spooler running it won't let me install it. I have tried manually and using the fix it program but all that does is restart the service and it will stop on it's own.
View 6 Replies View RelatedI have the same problem with my print spooler, my computer is only 2 mo. Old, hp, can't help me, staples can't help me, i have a warranty on the printer & computer but of course that isn't covered. I don't know what to do .
View 1 Replies View RelatedI have two computers wired to a router, both windows 7 Home Premium 64Bit. I have an HP 7580 printer wired to the router. One computer prints just fine. The other will print when the printer is first added, then it will stop printing after awhile. Deleting the printer and re-adding it solves the problem for a short while.
View 1 Replies View RelatedFrom time to time when I go to print something in Word 2003 it prints two pages per sheet. When I check "page setup" it's somehow automatically set itself to "2 pages per sheet" and I have to reset it to "normal".Is there some way I can stop this from happening.
View 2 Replies View Relatedmy hp 895cxi is not printing at all apart from a test page which only prints black despite changing both cartridges. Windows has installed driver software for 895cse.
View 1 Replies View RelatedI bought a new laptop with Windows 7 Home Premium 64bit a couple of months ago and havent been able to print anything at all. The printers that i have are HP Officejet K7100, HP Deskjet 960c. Both printers are recognized and the status on the control panel is all good, until i actually print something, thats when the spooler seems to begin the print job but it just ends up saying theres an error and no page is actually printed.
View 3 Replies View Relatedprinting a test page from the command prompt?
View 3 Replies View RelatedI have a MacBookPro with OSX 10.6.8 and a Toshiba laptop with Windows 7 to which is connected by USB a Canon MP250 printer. I have been able to network the two computers, meaning I am able to create a file on the Mac and save it on the Toshiba and vice-versa. But I am unable to print a document from the Mac on the Canon printer which is connected to the Windows laptop. I think I correctly followed instructions here.
View 3 Replies View RelatedI am trying to print a document in Excel Starter 2010. The document contains the columns A to J and rows 1 to 466. When I try to print the document, only one column prints per page. I have tried selecting all the columns and changing the print selection but this just shrinks the column size, and prints it smaller. How do I change it so that I can print all columns A to J on the one page?
View 2 Replies View Relatedi unable to print when i am printing its your file is printed
View 1 Replies View RelatedQuicken 2000 won't print even though printer says it's printing; No job in the printer que either. Downloaded another printer driver but that did not do the trick. it shows there's a printer in that que but nothing printed.
View 1 Replies View Related