Today on start up, noticed the machine was a little sluggish, but after a short while appeared to be normal. I tried to print a document and Windows 7 said that I had no printers installed? Looked at the Devices and Printer screen and only two were there with yellow triangles. Tried to do a printer install, Windows 7 said the spooler was not running. Went to services and enabled the print spooler, the printers showed back up on the D&P screen, initiated a print and same response. P&D screen showed no printers, did the enable of the spooler still no luck. Tried a reboot, same problem, did a recovery back a couple of days, it was successful but problem still remains after a print command. Did the normal virus scan, malware thing, now I am stumped. I remember several months ago 10-12 that I had to go into the registry and change something with this exact behavior, but that remedy escapes me now.
I've been using various print drivers for various locations with success for a month with my new laptop. Today, all drivers gone.Loading new ones doesn't work. Print spooler is not "started;" it starts successfully, then is not "started" next time I look.Other possibly relevant information: HP 1020, HP MX 340 at home office.Tried: multiple restarts of print spooler, multiple reboots, troubleshooters, HP detect and download drivers?
(Windows 7 Home Premium 64-bit, HP LaserJet CP1215)When printing from Word (or any other normal application) the documents just sit in the print queue with Status = "Error - Printing".If I stop, then re-start the Print Spooler service, they then print.Strangely enough, this does not happen if I print from the HP printer diagnostic utility.I've done complete re-install of the entire printer driver suite and I'm pretty sure everything that end is OK. So what's happening with the spooler? The error message isn't exactly very revealing
I have a laptop running Win 7 32-bit. I configured a network printer, which is an HP Deskjet 720 that is connected to an XP machine and shared. That worked fine. But I just purchased a new 64-bit desktop, and I can't print to that network printer. I can install the printer, and the status shows it's available/ready. But when I try to print a test page, nothing happens. When I check the document status, I get a message saying that the print spooler needs to be started. I've restarted it several times, but it still doesn't work. I've searched the forum and Googled this problem. Lots of users seem to have this same issue. I've tried all suggestions, but nothing works. The spooler is set to automatically start, and the restart time after error is zero. I decided that I'd try replacing the printer driver. But when I go into Control Panel and look at printer properties, the Advanced tab where I should be able to update the drive is all grayed out. So I'm stuck.
I have a customer with a Win7 Pro 32-bit PC that has had a HP Deskjet D2660 on it for 1yr that has been printing. They got a virus and used Malwarebytes to remove it. Now, the printer shows up as needing troubleshooting and will not print. The local print spooler starts, runs about 20 sec. and stops. I have uninstalled and reinstalled the printer.
I have a new computer with Windows 7. As of yesterday the print spooler keeps crashing. Of course the user cannot print.I can restart the spooler, but it crashes when trying to print or trying to open a printer.
It has been a while since I have been here. I am sure my PC has some hidden Registry problem, but I cannot find it. Hardware: HP 8440P, Windows 7 64 bit.
MacAffee found no viruses, but of course my kid was playing on the machine and I am sure he clicked "yes" on some webpage.
The Registry for the Print Spooler keeps shutting down. When I attempt to print from Micorsoft Word, it shows my HP1018 printer as not really being a printer. I checked the Print Spooler and attempted a restart. It restarts fine, but then when I attempt to print from Word (or any MS office program) the Print Spooler shuts down. Same is true with adobe acrobat reader.
My guess is something corrupted the Registry to screw with me.
I am using a Windows 7 Home premium (x64) laptop and a Canon MP560 printer. Anytime I try to print from my laptop to my printer (through a wireless network), an error pops up which reads: "Windows cannot connect to the printer. The local print spooler service is not running. Please restart the spooler or restart the machine." Sometimes, the printer disappears from my computer (I don't delete it, it just vanishes) and when I try to add printer I get the message: "Windows can't open add printer. The local print spooler service is not running. Please restart the spooler or restart the machine."I know it is not a problem with the printer as my husband's laptop is printing fine. Also, if I right click on the printer and try to print a test page from my computer it prints perfectly fine. However, I am unable to print anything from MS Word or the internet.
I have tried:
- System restore, twice.
- Manually starting the print spooler (in Services) but it stops running as soon as I send anything to print.
- Deleting and reinstalling the drivers for the printer.
New computer build with fresh install of Windows 7 (64) on formatted hard drive. I have no printers installed and am allowing window to download all updates. I can't install any printers as windows print spooler service is not loaded. If I go to services, and attempt to start the service, I get an error message that says "Windows could not start the Print spooler service on Local Computer" "Error 1053; The service did not respond to the start or control request in a timely fashion".
All dependant services are loaded and running. I have restored the computer to an earlier point and was able to determine the spooler services are running. I continue to allow updates and at some point the service becomes corrupted again. I check in services.msc after every restart. I can't seem to figure out what's corrupting the spooler service. I've even gone as far as to re-install a system image created just after all motherboard divers where installed. The service appears to be working fine and during the process of doing Windows updates,after a random restart, it's not working again. Once it stops working it never comes back until I do a system restore.
I just tried to print, only to find out the printing menu from MS word wasn't opening. I checked the print spooler service, and it's stopped. When I try to start it, I get the error 1503 message.
I've tried the following:
- Manually start it. Made sure the RPC service is running (yes it is) - System restore to a date I believe it worked - sfc /scannow (doesn't find anything) - some other cmd command which had "= rpcss" in it - Some said .NET update may do something, didn't
I saw something else about renaming .mui to .exe and the original spooler .exe to .bak. Tried that and the service just reported it couldn't find the files, so I reverted that.I can't recall off the top of my head what the files names specifically are, but the two files that are the spooler (spoolersv.exe and spoolersv.exe.mui?) are within the correct directory in Windows. I really am at a lost, and classes started this week for me so I'm drained right now... its tunneling engine service would do the same thing (error 1503 out of nowhere), so I had to reinstall that and add something in its registry directory. Easier using that for Sven Coop and Synergy Coop?
I am facing Print Spooler Services Stopped in Windows 7 and i'v done all the possibilities with win 7 like manually starts services many times but it again gets stopped.
clean its registry but not resolved applying some patches but not resolved install all updates of win 7 but not resolved delete SPOOLER folder;s file but not resolved
It always prompting me the popup windows " No printer found or print spooler services not running"
I have a Konica Minolta bizhub c250 connected to a linksys router, up until about a week ago everything worked fine, how ever all of a sudden the windows 7 machine (desktop) i use to print to the bizhub suddenly stopped printing from the internet and mS office 2010, however it still printed pictures just no text, and if the .doc was text only it just printed 3 thin black lines two at the top and one at the bottom. Whats odd is that test pages print fine from said computer, Notepad prints text just fine, but i can not get the machine to print text from ms office 10 or anything off the internet, even after a reinstall, i can print to the bizhub just fine from ms office 2010 on 3 laptops running windows 7 on 2 and vista on 1, it was odd however, a file made on affected desktop when transferred to the vista laptop the laptop began displaying the same peculiar problem, i have run: malwarebytes, spybot search and destroy, ccleaner, AVG, comodo antivirus, nod 32, esset online scanner, combofix... several others ... and i ran hijack this and went over the log with a fine tooth comb and found nothing out of ordinary operating.
Three days ago when I tried to print from the web and then WORD there was no installed printer. I checked and the printer was still installed but when printing a document the print screen said their was no printer installed. I checked and the print spooler was not working. So I downloaded the Microsoft toolMicrosoftFixit.Printing.Run.exe. I ran it and presto the printer worked but only once and when I went to print again, again the print box showed that there was no printer installed. So I have to run the Microsoft.Fixit.printing.run.exe tool every time I want to print a page then restart the computer. A royal pain and time waster.
Something is turning the spooler off and not allowing individual programs to see the installed printer and therefore reports that there is no installed printer.2nd issue. this is a new laptop (ACER) and there is no LED light to show "Caps Lock". I did find a setting that flashes the screen and makes an audible beep. However, my wife has the exact same computer and hers has a 2" x 2" box appear each time she puts cap Lock on. Which is way less distracting than audible beeps and flashing screens. Is there a setting for this? I have not found one in the Microsoft website for Windows 7.
I recent purchased a a new computer with Windows 7 Home Premium x64 and a Canon MG5220 Inkjet All-in-One printer. I have setup printer to be wireless (no problems). When I run the setup disk to start downloading the drivers, etc. I get the message that the Print Spooler Service stopped and to restart the computer. I have done that several times. Every time have to restart the spooler in the print spooler properties only to have have it stop a few seconds later when I try to re-run the setup disk. I have deleted the files in the printer and driver files under windowssystem32spoolerdrivers. There is a file called color in the driver filer. I have cleaned up the registry. I have tried the Window Fix.
I have a Windows 7 64bit host that points to a HP 2035 printer connected to a HP175x jet direct print spooler. Every time I print a document from any program the print que continualy resubmits te job when it has completed causing the printer to print multiple copies and will not stop until i cancle the print job in the que. I have verified that I only want 1 copy and have tried this from multiple programs, Word, Notepad , IE ect. I did intall the most current driver for the printer and OS. No change.
I have done everything that windows has asked and still can't get it to work. I have a windows 7 printer but since I can't keep the spooler running it won't let me install it. I have tried manually and using the fix it program but all that does is restart the service and it will stop on it's own.
I have the same problem with my print spooler, my computer is only 2 mo. Old, hp, can't help me, staples can't help me, i have a warranty on the printer & computer but of course that isn't covered. I don't know what to do .
I have my printer installed in my work domain PC. I try to print one page, and then after this my print spooler stops working. I have to start it manually, and after another page printed, it stops again. It's so annoying to start it after each print.
i recently got an update from microsoft on win 7, and immediately after it had finished updating i had no sound in any application (aim, skype, chrome, firefox, Internet, etc.). this has happened before, and i ran microsoft's sound problems wizard and it always said that an option had been clicked off and that it had restored it.this time when i ran the wizard it says it detects no problems. i am sure it is the software, as it happens a lot with ms updates. will downloadi can't go back to a previous configuration, i don't have one to go to
I'm on Windows 7 and have run into the annoyance of my PrtScn key actually bringing up the print dialog box to print. It still copies the screen to the clipboard for a paste into paint, but I can't figure out why it's bringing up the dialog to print or how to turn that off. I have seen it before maybe 8 years ago on Windows XP but do not remember what was done to correct it. When I try to search, I just find posts about it not working or how to turn the whole screen capture function off for the PrtScn button.
I was having trouble with the printer spooler stopping, finally got it fixed after 4 stressful days, went to Administrative tools, print management and deleted the print jobs that were waiting to be printed and it worked. you may have to go to services and restart your printer spooler first before it will recognize your printer.
could anyone tell me how to fix printer spooler error? it doesn't start running. When I click start it show this "Error 1068: The dependcy service or group failed to start."
I have a problem since I have installed windows 7, on each startup i get the message "Spooler SubSystem App has stopped working", i couldn't find any answer on the forum yet, on google the only solutions were for vista, and doens't seem to work... does anyone had issues with it?
I am not sure if this problem is due to a user account issue or a printer issue.
I cannot add a printer and all my printers from Windows XP were wiped out. I use this machine for business and I did not want to do a file and settings transfer so I updated to Vista and then updated to Windows 7 from there.
I had a bunch of printers installed including a couple of wierd ones such as a FileCabinet Printer, Adobe Acrobat Writer, CutePDF writer, etc. I don't know if these strange printer drivers affected the upgrade but now I cannot add a printer. I tried services.msc and attempted to start the spooler service, it usually is already running and its on automatic. Its not that, its something deeper than that. I also right clicked the spooler service and made sure the check box was checked for allowing the user to interact with it.
I found a Microsoft post for XP: You cannot add a printer and you receive printer spooler error messages in Windows XP
