Windows 7 Restore Points Continuously Deleting
Feb 14, 2011
I'm running Windows 7 Home Premium on a Dell Inspiron N7010. My system restore points are continuously deleting somehow. I have created restore points manually and I have seen the occasional restore point created from system updates. I will then check back after about an hour or so and the restore point is no longer there! I found that my volume shadow copy service was stopped - I restarted it and set it to auto start. I have system protection set to restore system settings and previous versions of files and have 1.46GB set aside for restore points. I have had it set as high as 2.93GB. I have my laptop set to go to sleep when I close the lid, so I'm wondering if that may be an issue.
View 4 Replies
ADVERTISEMENT
Jun 16, 2012
I get this thingie alot and cannot find what is causing this.I use windows 7 and make a manual restore point. Then maybe a week later I want to make use of that restore point but *voom*. Restore point is gone.I know ccleaner does this when you run it. So I never bother running it until after a few months.What the hell is deleting my manual restore points any ideas where to start looking? I reserve 3% on a 500GB drive so that is good.
View 6 Replies
View Related
Jul 20, 2012
I had reason to check my System Restore function today and found only 3 points to choose from. One from July 15, 2012, another from 2011 and the last from 2010. Obviously two of them are worthless. I understood that a new restore point should be added each week, or at a major change of some sort. How do I change this so that more points are added as time goes by? One each week would be just fine. I can't find this option in Win 7 as I recall was available in XP.
View 9 Replies
View Related
Apr 28, 2012
I wouldn't go so far to say, I'm totally computer illiterate, but not far from it.. If there's anyone out there, who's up for a challenge I'm running windows 7. I am the administrator. Someone I don't trust at all, used my PC a while back. After he (did whatever he did) I noticed I couldn't access several files. I get a "access denied" or you don't have permission to view this file, owner info etc.. I can see a lot of the files, but their either empty now or I can't view them. I have used restore many times in the past, but now I get a message " no restore points".. I don't know what he did, or if he did anything.. It could be one of my kids changed properties by mistake, before I wised up and created a basic user acct w/ limited access for them.. I almost forgot. When I go into file properties there is a red x by my user name (administrator) Not in every property, but several.. Sometimes there is a red x by other user names, as well, but mostly mine.
View 3 Replies
View Related
Feb 15, 2012
System restore failed to extract the file. from the restore point. There was a disk failure during the restore. This might be caused by bad sectors on the disk. I get the same message, but with a different file name, with every restore point I try, and I have now tried all seven available restore points, going back to 30 Dec 2011. The computer was working perfectly until 3 days ago when it blue screened, and has not started properly since. It is a Corei5 with 4 GB RAM and is only 12 months old. I just dont believe the drive has that many bad sectors.
View 9 Replies
View Related
Dec 30, 2011
I have Windows 7 Home Premium, 64 bit system, over 250gig free on Hard drive and 8 gig RAM. For whatever reason, This Windows 7 does not go back on earlier RESTORE points that I know I had set months ago....Is this a general problem with windows 7, or is there something that is not configured correctly, for Windows 7 to retain prior months restore points. What can I do to ensure restore points are created and kept for an extended period of time, given that I have plenty of Hard Disk space?
View 5 Replies
View Related
Feb 10, 2012
When I had XP,there was a separate folder containing System Restore Points. Has win 7 Home Premium got anthing similar? If so where do I find it?
View 13 Replies
View Related
Nov 25, 2012
I am using a Lenovo Y450 Ideapad. When I turned on my laptop one morning, windows 7 refused to start up. After starting off with the initial Lenovo start up screen, a second screen of 'Loading Files' appears. It then goes into Startup Repair. After attempting to repair, a message appears stating that Startup cannot repair this computer automatically. It cannot repair and the only solution is to restart the system and the same cycle repeats. I have read some comments about using F8 and F2 but there are also no restore points (which is surprising) or any image points. I have important data and I usually back it up but havent done so in the last couple of weeks due to work. I am hoping that I can at least get the data out. Also, I do have a Windows 7 CD.
View 14 Replies
View Related
Mar 21, 2011
I have dual boot, win 7 and win Xp. Every time i use Win XP, my restore points on win7 are missing. I changed the drive letter on win 7 partition in win Xp with diskmgmt.msc, but still is the same problem.
View 3 Replies
View Related
Oct 22, 2011
I want to save a restore point by taking its backup becoz system deletes old restore points nd new ones are created . I wanna take its backup so that old restore point can also be used. So can anyone tell me where does system save its restore point.
View 6 Replies
View Related
Jun 25, 2010
Why are my Windows system restore points disappearing?I am having problems with my system restore points in Windows 7. I create the restore points, but when after I shut down my PC, they are gone. This is happening with all restore points that the system creates also, such as when it installs updates. I have tried everything suggested online. I made sure that system restore is on, I checked the service, and I set volume shadowing to automatic. Why are Windows system restore points disappearing?
View 29 Replies
View Related
May 13, 2012
i couldn't use SYSTEM RESTORE for a long time as an error pops up every time saying "System restore encountered an error (0x81000203)" . Because of this problem i couldn't create any restore points in Windows 7 and my system is desperately in need of a restoration.
View 4 Replies
View Related
Dec 1, 2008
This tutorial will show you how to delete the System Protection restore points in Windows 7.
View 0 Replies
View Related
Nov 25, 2012
I got message in Word that there was insufficienmt memory to perform an operation so I rebooted. My PC wouldn't reboot and there was no last known good configuration so I ended up having to reinstall windows (had only installed it a month ago) Why should there have been no restore pointsa? Doesn't it automatically set them?
View 1 Replies
View Related
Sep 2, 2012
I have Windows 7 Pro 64 bits SP1 installed. Here's the deal. My system crashed overnight (no one knows why). When it boots back up, it works fine for a while and then Freezes (no more mouse mouvement, no more num-lock light switching on/off). Windows Event is of course empty. I was able to figure out where the source of the problem is. Seems that the whole Restore Point thing is corrupted. Including the Auto part where once in a while it creates a back-up point during boot up. I have tried in normal mode: Accesing the restore to a previous point through Windows normal mode: Freezes every single time when i hit the configure button to remove the Restore point from my C: Drive. Accessing it through CCLeaner and trying to remove a single Restore Point: Freezes. Accessing it through Disk Cleaner, Delete all the restore points. It works... but never ever delete anything.!
View 9 Replies
View Related
Jan 30, 2013
ive got a sony vaio laptop that worked fine until i dl a pdf file and tried to view it, the machine froze and i had to reset it, since then it will not boot, booting from hd it gets to the windows logo then flashes up a blue screen with text on it that stays on for 1 sec then it resets and starts again.ive tried the sony recovery tools that shows no partitions on the hd, system restore says there are no restore points.
View 13 Replies
View Related
Feb 6, 2013
I am using Windows 7 Professional (64-bit) 6.1.7601 Service Pack 1. I used System Restore to undo system changes to my computer. I want to undo this System Restore operation, but System Restore says there are no restore points.
View 1 Replies
View Related
Feb 8, 2013
I am using Windows 7 Professional (64-bit) 6.1.7601 Service Pack 1. I used System Restore to undo system changes to my computer. I want to undo this System Restore operation, but System Restore says there are no restore points. How then can I undo this?
There were many, many restore points before. I have recovered the entire contents of C: with Recuva. What do the restore points look like?
View 1 Replies
View Related
May 29, 2012
In my system I have three operating systems installed for me to boot into - Windows 7, XP & Ubuntu. Windows 7 is the default and probably even the most used one.The problem is that each time I boot into Windows XP, Windows 7's system restore points get wiped out totally. The same does not happen with XP though.
View 14 Replies
View Related
Jan 19, 2009
It seems my Win7 system is only retaining the last restore point created.I have configured it to save files and settings, and use 5% (5+gb) of available space (Win7 installed on a small partition for now). I can never see more than one available restore point even after ticking the "Show more restore points".
View 9 Replies
View Related
May 26, 2011
When I open system restore and click more restore points...I get about 60 different restore points dating back to last June.In CCleaner...theree are only about 10 dating back to last week ?Are these 5 dozen restore points a problem and is there a way to get rid of them without losing all recent restore points ?
View 4 Replies
View Related
Feb 1, 2012
I get this message when trying to do a system resore "No restore points have been created on your computer's system drive. To create system restore point open System Protection.I have checked that system protection is turned on and the option selected is "Restore system settings and previous versions of files".I have also set the maximum Usage to 30GB. I have tried to create a couple of restore point and it goes through the motions OK but on checking find that none have been created!I have AVG 2012 fully updated and have run a full scan also have the latest Malwarebytes installed and ran a scan with that.
View 5 Replies
View Related
Nov 13, 2012
I am having some issues playing Starcraft II that I didn't use to have when I first assembled the computer. I wanted to restore back to where I was several months ago, but the restore point isn't listed in System Restore. In fact, only 3 restore points are offered and they are all in the last few days.I looked at the space available to save these restore points and it was only using 1.59 GB of an allowed 2% which is 10 GB
View 2 Replies
View Related
Jan 14, 2013
When my PC wouldn't boot a few months back I thought I was safe with system restor. Wrong , there were no points there to restore to. A few week ago when I was having problems there were no restore points either and I discovered the upgrade install method, and got going again. Having recently been helped with PC crashing several times a day (by uninstalling catalyst Control Centre), I seem to be up and running normally again, but there are no rstore points. I asked about this serveal months back and I seem to remember that there is no automatic creation of restore points (ideally twice a week would be good). I followed instructions to set this up, but still they weren';t there when I needed them.
View 1 Replies
View Related
Sep 24, 2012
Having just had en error where I get 'non nsystem disk' message (now solved, I discovered in the process that there were no system restore points since January. I have been in task scheduler and it is set to create one on boot and one at midnight
View 5 Replies
View Related
Aug 10, 2011
Does anyone know how to schedule/automate a rollback to a system restore point at a set time each day?What i'm trying to do is:1. Disable the standard system restore behavior for creating restore points when installing apps and drivers.2. Automatically/schedule a restore point to be created every morning. (probably using Task Scheduler)3. Automatically/schedule a rollback to that morning restore point every night.This should allow users to mess up the workstation during the day, and restore a working rollback point at night when users are not using a workstation.Updates are scheduled at nighttime, so before that happens, it should rollback to a good restore point, apply updates, then create a working "new" restore point with the updates in the morning....etc.
View 4 Replies
View Related
Aug 18, 2012
How do I Remove unused restore points and shadow copies from System Restore?
View 5 Replies
View Related
Jan 22, 2011
Does Running Defrag (Windows 7) modify or impact established Restore Points?
View 2 Replies
View Related
Dec 14, 2011
I own a 4GB Thinkpad SL510 laptop, running Windows 7 Pro 64-Bit w SP1 installed.Lately, I have noticed that my System Restore points disappear. When I open SR and look for restore points, none are there.To test this,I create one and it creates successfully. I go back and check after a while....and it's GONE. There is no apparent pattern of WHEN they disappear. Sometimes they go after a re-boot, sometimes they stay around for a day or so, then disappear. Sometimes they go away while the computer is still on.I would guess that this started about 1 week ago...at least that's when I first noticed it.There is a common error in the event log which I attached here. This seems to coincide with the time I no longer have restore points.The shadow copies of volume C: were aborted because of an IO failure on volume C:.I increased the amount of space for system restore to 40GB (which should be more than enough...this is 20% of my C Drive. I used to have this at 10% with no problems in the past.I've scanned for viruses and nothing comes up.I also ran CHKDSK C: /f /r and I found 4kb with bad sectors but no other areas.
View 5 Replies
View Related
Sep 23, 2012
I noticed my restore points were being deleted for some reason and I went to the System restore settings of my computer, and being oblivious to what I was looking at I confused my recovery drive with my C: and I turned it on and gave it a gig of disk space usage. After I realized I was configuring the wrong one I went back turned it off and deleted restore points but It won't let me put the max usage back to zero it will only let me keep it at 2% (320.00MB).Is this going to cause any problems or is it fine?
View 1 Replies
View Related
Sep 26, 2012
I would like to do a system restore, but when I try to do so (system protection/system restore), it tells me that "no restore points have been created on your hard drive".
2 weeks ago I successfully did a system restore, and I have not changed any settings since then. My recovery partition is still in place, the disk manager says the recovery drive has 8 GB out of 15 GB free. Could the restore point be in my recovery partition, but for some reason Windows isn't seeing it? How would I view the recovery partition to check?
View 4 Replies
View Related
