Windows 7 Network Cable Unplugged?
Mar 19, 2011
I recently installed Windows 7 ultimate , earlier i had xp. Now i am able to use wireless but not the LAN. I have checked in change adapter setting and its keeps saying network cable unplugged.Windows 7 , 32bit.Intel r82562gt 10/100.Latest drivers installed.Cable is perfect.Laptop is HP550.procesor Intel core2duo t5270.In device manager i can see under network adapters two options and these are intel r825662gt 10/100 network connection and intel r wireless wifi link 4965ag.Please suggest me some way out as at my home i don't have wireless. I tries to include all the info which i thought would be necessary still if any reg do let me know.
View 3 Replies
ADVERTISEMENT
Dec 28, 2009
I installed Windows 7 (x86) today, but have found some trouble with getting a Internet Connection.
I'm using a dc-202 router. Windows doesn't detect any connections, and when going to network connections it says: Local area connections ; network cable unplugged (tho the cable IS plugged in, and my driver is up to date). My Ethernet card is a VIA Rhine II compatible fast Ethernet adapter.
I already tried to reinstall windows and to skip the router, and just connect directly to the Modem. Even then, I get an error stating: unidentified network. So when i go trough the router, i can't see any connections, when i go directly trough the modem i do get a network, although i cannot connect to the Internet). I can't go on the Internet either way.
I hope this is enough information, otherwise i have some typing to do (cant post on my own computer, or use LAN)
View 9 Replies
View Related
May 8, 2009
i've decided to try out windows 7 64bit. after fresh clean install i had an issue with drivers for my integrated network card, which i installed from CD i received when i've bought MB, which is ASUS P5B Deluxe with following network devices :
Marvell 88E8056 PCIe1x 1 Gbit/s LAN
Marvell 88E8001 PCI1x 1 Gbit/s LAN.
now i have 2 network devices displayed in device manager which appear to be working properly :
marvell yukon 88e8001/8003/8010 pci gigabit ethernet controller
marvell yukon 88e8056 pci-e ethnernet controller
and then 3 "other devices" left with yellow exclamation mark :
ethernet controller
rtl8187_wireless (i've disabled this one since i don't need wireless)
unknow device
i also have tried to install newest drivers from marvell homepage, but nothing has changed. i've also tried to setup speed on both network devices from auto to 100mb full and half duplex, but i'm still getting cable unplugged message.
i didn't play with router so far. my network was working with XP32bit without problems.
i have a feeling, this problem will disappear with 32bit release, but i'd rather try the 64bit one. is there anything i can possibly do to get rid off this problem?
LE: i've also tried to go directly with my internet cable without router, but the result is the same.
View 4 Replies
View Related
Aug 11, 2011
I have an application that establishes a socket connection w/ another application on a different machine. When this connection is disrupted (e.g., pull out network cable), I recognize this condition and take some action.
In a Windows XP 32-bit environment, this happens quickly ... in seconds.
In a Windows 7 64-bit environment, this happens slowly ... in about 5 minutes.
If I run netstat in the Windows 7 environment, the TCP connection shows established for about 5 minutes after the network cable has been unplugged. (In WXP, it changes in seconds.) I've searched the forum and have heard a few people refer to 5 minutes as being a "default" timeout value. I've also looked at the TCP spec, etc. to learn a bit more, understand it better, etc. in an attempt to find something I can configure to reduce the 5 minutes to seconds but I've not run into anything yet.
View 6 Replies
View Related
Aug 29, 2012
OS: Running Windows 7 Home Premium 64 bit on Laptop and PC (custom build).
Router: ASUS RT-N56U
Switch: D Link DES 1008e
Network Adapter PC: Realtek PCIe GBE Family Controller
Network Adapter Laptop: Realtek PCIe FE Family Controller
When either is plugged directly into the router, no ethernet cable is detected. If you run either the PC or laptop through the switch first, it works just fine. I have uninstalled and re-installed network drivers, I've uninstalled and deleted the adapters and software and started from scratch. I've checked all of the setting 3 times over.
View 6 Replies
View Related
Aug 18, 2009
I have Windows 7 Pro (RTM) installed on a DELL Precision M65 laptop.
My LAN interface reports "Cable unplugged" although the cable is inserted and working.
I have no network connection through this interface.
the onboard NIC is a Broadcom NetXtreme 57xx Gigabit adapter and the driver reports it is working correctly.
If i try to install the latest driver from Broadcom, Windows says I already have the latest driver installed!
Any Suggestions?
View 4 Replies
View Related
Nov 2, 2009
I recently purchased a USB 2.0 Network Cable. I have been unable to find the necessary drivers to support the cable. I bought it from a wholesale website, and there's no manufacturer disclosed on the box or the website.
The disk that came with the cable has drivers, but they don't work on windows 7, and the pop-up tells me to contact the manufacturer, which of course I cannot do.
If you could help me find the appropriate drivers, I'd really appreciate it. If not, then I would like to return the product since I am unable to use it.
View 8 Replies
View Related
Jul 19, 2012
My laptop suddenly stopped being able to connect to the network in my house and for that obviously it doesn't have any internet. It doesn't work either by connecting a cable or trying to use the wireless, here are the detaills for each case: When I connect the cable, the laptop detects it, but doesn't detect any network, it doesn't seem to even be trying. I checked on the network adapters, and it clearly says "enabled" when connected and when disconnected it changes to "No network cable plugged in". When I try to connect to my network, it always ends up saying "Limited access", when I tried troubleshooting, it said that there may be an error with the network drivers, I tried the fix there, and then it says that there must be an error with the network adapters.
Here's what I have tried so far:
-Reinstalling the devices and drivers, when I check them in device manager, it says that both the wireless and network driver are working properly.
-I tried resetting the router.
-Tried resetting the bios of the computer to it's factory ones.
- Tried resetting IPv4 and IPV6, along with the IP/TCP using the command prompt, still no go.
When I try to ipconfig /release or ipconfig /renew, I get an error saying the next thing: "An error ocurred while releasing interface Loopback Pseudo-Interface 1: they System cannot find the file specified. The operation failed as no adapter is in the state permissible for this operation."
Here is my info when using ipconfig /all:
Host name... : Jorge -NB
Primary Dns Suffix : Empty
Node Type : Hybrid
IP Routing Enabled: No
Wins Proxy Enabled: No
Tunnel adapter teredo tunneling pseudo-interface:
Media state: Media disconnected
Connection-specific DNS suffix: empty
Description: Teredo Tunneling Pseudo-interface
Physical Adress: 00-00-00-00-00-00-00-E0
DHCP Enabled: No
Autoconfiguration enabled: Yes
View 2 Replies
View Related
Oct 29, 2009
My wireless connection only connects when the network cable is connected. If I unplug the RJ45, the wireless won't connect. This is so dumb.
View 1 Replies
View Related
Aug 19, 2011
i wanna get Dell network cable driver.
View 1 Replies
View Related
Jan 18, 2010
I have been having some trouble with Windows 7 and an ASUS A8V-Deluxe motherboard (K8T800). Windows 7 will not recognize that a network cable has been plugged in, even though the network cable and switch port tests ok on another PC. I've also tried a number of network cables CAT5e/CAT6.
Previous OS was Windows XP and everything worked fine.
System specs:
Asus A8V-Deluxe (939)
Athlon 3500
2GB DDR400
NVidia 6600GT 256MB
250GB IDE Hard drive
LG DVD-RW (IDE)
Background: Started with a BIOS reset and a clean install and format of the hard drive every time
1. Installed Win7 x64 - Network Cable Unplugged
2. Installed Win7 x86 - Network Cable Unplugged
3. Installed Win7 x64 & added a known-to-be-working Intel Pro 100S NIC - Network Cable Unplugged on both NIC's
4. Installed Win7 x64 & added a known-to-be-working Intel Pro 100S NIC - Network Cable Unplugged on both NIC's
5. Disabled Onboard NIC and re-installed Win7 x64 - Network Cable Unplugged (Pro 100S)
6. Disabled Onboard NIC and re-installed Win7 x86 - Network Cable Unplugged (Pro 100S)
So it would appear that something else is causing the Network Cable Uplugged issue, it looks like something within Windows 7, rather than a physical problem with the NIC.
I have tried disabling IPv6, but that makes no difference.
I have tried a couple of BIOS versions, maybe if anyone out there has had any success with this MB and Windows 7 they could recommend a BIOS version?
View 8 Replies
View Related
Jan 6, 2013
Here are the computer specs of the computer:
Ultimate SP1 64-bit
Xion 600W PSU XON-600F14R-201
Asus M2N32-SLI Deluxe Motheroboard
nVIDIA nForce 590 SLI Chipset
BIOS Revision 1402
NVIDIA GeForce 8800 GTS 640MB
AMD Athlon 64 X2 Dual Core 6000+ 3.15 (15 x 210 FSB)
Muskin 4GB (2 x 2GB) 991587 DDR2-800 SDRAM 5-4-4-12
Koolance EXOS2 Watercooled
OS Drive: Seagate Barracuda ST3500820AS 500GB
DATA Drive: Samsung HD501LJ
NVIDIA nForce 10/100/1000 Mpbs Ethernet
Realtek RTL8187 Wireless 802.11b/g 54Mpbs USB 2.0 Network Adapter
The CAT 5 Ethernet cable network cable is attached to our main Linksys WRT320N DD-WRT router ---> Motorola SB5101U DOCSIS 2.0 Cable Modem ---> Coaxial cable from wall outlet. Another computer is also directly connected to the same router via CAT 5 Ethernet cable and two more computers are wirelessly connected to the same router and none of these three PCs are experiencing issues so this should rule out the router as the culprit.if I leave the computer on (even for hours) with no network cable attached to the computer, it does not turn off. But as soon as I plug in the network cable, the PC will shut itself off within 5-15min.Based on the same scenario as described above, here are the troubleshooting attempts I made without success, except for numbers 4 and 6:
1. Switched to different network cable and router port.
2. Disabled Network Adapter connections in "Network adapter settings" for both the onboard ethernet port and wireless adapter.
3. Ran MSCONFIG.EXE and rebooted in diagnostic mode. Only basic Windows services are loaded. No startup programs are loaded.
4. Rebooted in Safe Mode with networking but could not establish any network LAN/WAN connection. Computer did not shut off!
5. Cloned entire hard disk to another hard disk and switched SATA data and power cables on the same computer.
6. Installed fresh Windows on different hard drive on the same computer. Computer did not shut off!
Out of those 6, only numbers 4 and 6 were where the computer remained on and didn't shut off at all after the network cable cable was plugged in.
View 1 Replies
View Related
Oct 22, 2011
My C drive is failing and I need to replace it. I have software to clone the C drive but Win 7 seems to be installed on 2 drives? There are 2 drives in this system. This system started with XP and I at some point upgraded to Vista. Then a year or so ago when Win 7 came out I upgraded again. It seems some how Win 7 has used the 2 drives in the system to install. When I disconnect the old drive that was there when I installed XP, on boot I get a message that it can't find win 7 and I need to insert the Win 7 install disk to repair the system.
First, how did it use 2 drives to install it's self (win 7) and is there any way to correct this so it's only on the C drive and I can clone it and replace it?
Second, the repair option. Will this wipe everything out? If I do the repair will everything be the same except it will boot with just the C drive and I can then clone it and replace it or will it wipe everything out?
View 11 Replies
View Related
Dec 27, 2011
what option to be used to come back in normal my mini dell inspiron 1018,,it was accidentally unplagged and cannot restart and booth again..what option should be use?
View 1 Replies
View Related
May 1, 2012
i have unplugged my computer, instead of logging off. can this cause any system file damage and the blue screen?
View 3 Replies
View Related
Feb 2, 2009
I loaded Windows 7 on my laptop and everything works just perfect. However, when I unplug from power the screen saturates or goes to a white screen with only the darkest colors showing up. Impossible to do anything while unplugged. But as soon as I plug back into power, about
3-5 seconds later the resolution comes back. Here are a couple pics of the same screen plugged/unplugged.
Any thoughts?
View 9 Replies
View Related
Jul 2, 2012
booting through USB and it's quite hard to explain but at the moment what I need to know for succeeding with the installation is, is it ok to unplug the USB flash drive after the first restart during the installation? My friend just told me that after it is done expanding the files and reaches 100% and does it's first restart, I can unplug the USB and it will continue it's job as all the files are saved on the HDD now.
View 7 Replies
View Related
Apr 30, 2012
I have a new gaming computer with a high end video card and plenty of RAM and a high speed cable Internet connection. I also have a HDHomeRun TV cable unit which is listed to work with MS Media Center. When I set up my Media Center/TV connection it recognizes my HDHomeRun TV connection and all three TV channels via my MCard I got from Comcast cable. But next to the last dialog window, during setting up my TV connection, I got the following message, "Your computer is not digital cable ready. You will not be able to set it up for use with a cable card."
View 4 Replies
View Related
Jan 1, 2013
So my grandpa got a new laptop for his birthday a while ago... Strong laptop, nice hardware. Can't remember the name or model though...Anyway, so he runs Windows 7, and he told me that every time when he pluggs out the charging cable, the computer shuts down. But when the cable is plugged the computer runs just okay and the battery is full.
View 7 Replies
View Related
Nov 19, 2011
"Windows has encountered a problem communicating with a device connected to your pc.This error can be caused by unplagging a removable storage device...,or by faulty hardware such as a hard drive or CD-ROM.Make sure any removable storage is properly connected and then restart your pc.
View 1 Replies
View Related
Nov 6, 2011
I just downloaded new drivers for my Realtek Audio and now every 20 minutes or so I'm getting a message pop up saying "You just unplugged a device from the audio jack." and for about 2 seconds audio won't work, then it will work fine. This has only happened after I downloaded the new drivers. I've checked the physical speaker connection and it's properly in there.I don't know how to get the exact name for my sound card so if that's needed please tell me how.I suspect that it might be because of some other out of date driver, if it is so I would be very grateful if you could give me links to where I could download drivers because besides this update and graphics cards updates I have no idea how to update any other drivers.
View 5 Replies
View Related
Apr 27, 2011
I recently purchased a Lenovo Thinkpad Edge and loaded all my usual programs on it that I used on my previous computer. I'm not positive exactly when, but currently my computer will run very fast when plugged in. Then if I unplugg it to do some work in "the office" it will continue to run just as fast and smooth. However once I replug in my computer it will run very choppy and slow and it is basically impossible to use before I restart it. Once I restart it it will run perfectly again. [code]
View 2 Replies
View Related
Jan 20, 2012
I have recently installed a new cpu cooler and tidied up my cables, I have replugged in my sata cable but now I have the no bootmgr problem, all was good before this and now I can't start windows 7.
View 3 Replies
View Related
Jan 16, 2012
The audio from my computer completely went dead when I turned it on. The speaker icon shows the symbol with the 'X' on it and after clicking it and going through the troubleshooter it can detect no problem. I tried updating the drivers through the HP website, and uninstall/reinstalled them but it still doesn't work. I even tried rolling back the computer to a restore point but that didn't work either.
The speakers are built into my monitor and is connected through a normal audio jack (not HDMI). I normally use my headphones through a jack built into the front of the tower.My computer is a hp Pavillion Elite m9400f, Windows 7 Ultimate 64X (It also has a ATI HD Radeon 5770 graphics card; but I'm not sure if it's relevant to what might be causing this problem).
View 2 Replies
View Related
Feb 14, 2013
I have a Gateway model MD2614U laptop os Windows 7 home 32bit. When I unplug the headphones to use the internal speakers sometimes the laptop will switch over and sometimes it won't. When it won't switch over. I open the volumes control window and I can see the green bar going up and down with the audio source but there is no sound coming out. I have to end up closing down the program that is producing the sound then the switch over will complete and I restart the program. I also have the same problem when I plug the headphones back in, again no sound from the headphones even though I see the green bar moving. Also some programs that send and receive audio over the internet will lock up when I unplug or plug in ether the headphones and or the microphone.
View 1 Replies
View Related
Jan 28, 2013
Last night i was playing a game (DmC) on my computer and my cousin came out of nowhere and unplugged everything. (it was a multi plug that was connected to my tv, monitor and computer) When i turned my pc back on: it asked me if i wanted to repair the problem; so i clicked yes. After awhile, the computer restarted, but now it can't seem to start normally anymore, all the safe mode options work, but every time i choose to start it normally; it just goes in an infinite start up loop.It shows the hp logo, then says that it's starting up, shows a black screen with the mouse symbol showing and starts that pattern all over again.
(specs)
an hp pavilion p7-1205 with a
2nd generation intel core i5-2320 processor
intel hd graphics
2 terabyte hard drive
wireless lan 802.11b/g.n
genuine windows 7 home premium
View 11 Replies
View Related
Jul 2, 2012
When I plug in or unplug my external display to my laptop, my display options no longer automatically reconfigure as they used to do. Now if I unplug the monitor, Windows acts as if it's still there, and windows that were on the monitor stay offscreen (as does the cursor, if that's where it was). I can manually move the cursor back, right-click load graphics properties and make changes OR do an F-key combo to move everything back on the laptop screen OR program a hotkey but these are all pretty annoying for one reason or another. Unfortunately this must have started happening sometime in the last two weeks--at the same time as I made a load of major computer changes.
However this did NOT include a graphics driver change (my graphics driver is current). At this point I feel it could be anything, but I'm wondering if it could be a recent BIOS update I did that HP recommended. By way of troubleshooting I did run Windows in safe mode with ONLY the "ATI Catalyst" and "AMD External Events utility" running on top of the basic services, in case a newly installed service was stealing hotplugging messages, but that didn't do anything. I've also gone exhaustively through my graphics driver settings to make sure everything there looks correct.
View 3 Replies
View Related
Nov 23, 2012
Recently my audio manager pops up advising that I have diconnected my speakers however, I'll be listening to music or watching tv with no sound loss or interuption. Device manager indicates all drivers are up to date (vers: 6.0.1.6251). What's causing this and how do I correct it?
View 3 Replies
View Related
Aug 4, 2009
Every day or two, Windows 7 is REVERSE dimming on me and I can only fix it with a reboot.What I mean is, suddenly when the AC Adapter is PLUGGED IN, the screen will be DIM (Even though control panel shows it as max brightness on the slider). But then once I UNPLUG the adapter, the screen is bright like its supposed to be..For the life of me I can't figure it out, but it's driving me to the point of insanity because I keep having to reboot so often.
View 9 Replies
View Related
Oct 29, 2012
I have BT Infinity with the BT Hub 3.About 5 days ago my Telephone and Infinity stopped working due to a fault on the line. In order to be able use the internet i logged on to one BT's Wifi Hotspots which altered some settings so that I could connect. The faulty line has now been fixed.My problem is that I can no longer get my Desk Top to connect to the hub,despite turning off wireless it still connects wirelessly to my hub.
View 5 Replies
View Related
Jul 19, 2011
I've searched through the forums and other places, and tried many "solutions" but they don't seem to work. So the situation is I have two computers, Windows 7 and XP. They are connected via a crossover cable. Currently, I can access my shared folders on the XP computer from the 7 computer, but I can't access folders on the 7 from the XP. I can map the network drive, but it says that is not accessible and access is denied.
I configured the network settings and disabled the firewalls so that both computers can ping each other. On the Windows 7 computer, I have made the network identification into "Work". I believe I made the correct options for the "Advanced Sharing Settings" tab. They are both in the same work group. For the shared folder on the 7 computer, I went to "Advanced Sharing", checked the box, and allowed "Full Control" for "Everyone" in the "Permissions" tab.
View 1 Replies
View Related
