I have problem with Windows 7 booting on my laptop (Asus). Windows 7 stop responding/freeze at "Starting Windows" - before starting animation:I was format PC again, and worked good, but when I installed drivers, and need restart, again freeze at "starting windows".When freeze, I can't boot in windows trough Safe Mode, Last Known Good Configuration, System Restore, only with System Image Recovery.I installed some drivers and work good, but when I install some programs like Google Chrome, Photoshop, WinRar etc. again freeze
If the computer has been on for an hour or so windows freezes 9 of 10 times when starting a new application. No matter which app it is, it can be Maya, 3ds Max, Photoshop, After Effects, Spotify or even a simple jpg/targa picture in any program. But just after rebooting everything works fine for about an hour or two, it's then the problem starts. And it doesn't freeze always, sometimes the computer can be on for a couple of days without rebooting and I start any application normally, but that happen like 1 of 10 times. I'm running the latest drivers for the graphics card, mobo, mouse/keyboard and I've even tried with older drivers for the components but the problem still remains.
A while ago i dual booted windows 7 onto my vista running laptop and it works perfectly. It is a huge improvement on vista, it is faster, better designed and its new features are very useful. Because of this success I know am trying to dual boot it onto my xp running desktop. Unfortunately it doesn't seem to like it.
I have used the same technique that i did on my laptop to install it. I have burnt the iso file onto a disk and run that disk while the computer is running. Checked for online updates and done a clean install. The installation works fine and quite quickly until it comes to the first restart. It restarts and I select "windows setup" on the bios screen as apposed to "an earlier version of windows" which is my xp partition.
It then changes to the starting windows screen that happens just like on my laptop, except the windows logo never materializes and it stays as a black screen with the words "starting windows" on it. i have left the computer on overnight and no change. I have tried reinstalling several times with no luck, both using the same method as before and booting from the disk at startup. Although when I boot from the disk it just skips straight to the same frozen windows startup screen.
I have downloaded the windows 7 adviser software but the program cant seem to make its mind up. Sometimes it announces that my graphics card cant run windows 7 aero and sometimes its fine. I have checked the windows 7 specs and my graphics card appears to meet all the requirements, both dedicated memory and direct x 9 support.
Here are my pc specs: Dell dimension 5150 XP professional sp3 3ghz intel pentium 4 5 gb RAM Radeon x300 SE 128mb hypermemory direct x 9.0 creative SB live! 24-bit 160gb maxator SATA HDD
After recently building a custom PC, I am doing a clean install of Windows 7 (64 bit) and all goes well through the installation process (loading, expanding files, etc) except when after the 2nd restart when it starts up for the first time. It freezes or hangs on the black “starting windows” screen (the one with the new colored windows logo).
I have tried installation a number of times, including with a bare bones configuration (2 Gb RAM, 1 HDD, 1 DVD Drive, GPU, and all other peripherals disconnected) and still the same thing happens. I have also tried the process using the VGA cable instead of the DVI.
I was able to successfully install XP after failing to install Win7, so I don't think my HDD is bad. I am also using a PS/2 Keyboard
System:
CPU: Intel Core 2 Quad (Q9650) 3Ghz/1333Mhz/12MB MBoard: Asus P5K-E GPU: Sapphire HD 2600XT HDD: 2 x WD 640 Gb 7200/32MB/SATA 3.0Gb/s (Caviar Black WD6401AALS) RAM: Mushkin 4Gb DDR2 SDRAM (2 x 2Gb) PSU: Antec NeoPower HE550w (ATX 12v) OS: Windows 7 Ultimate (64 bit) OEM system builder pack
All components were purchased new from Newegg. I also have some peripherals: 2 DVD drives, Multi card reader, extra USB, firewire ports, wireless LAN card (although I disconnected those for the initial install attempt).
Any help or advice would be greatly appreciated. I am really at a loss to figure this one out. Could it be something to do with my video card driver? (Do I need to install that in the BIOS?)--I can see everything fine on my monitor though.
Windows 7 freezes as dots begin to come together, 2 tiny dots (red & yellow), then goes to black screen. Startup repair boots to light Microsoft logo. Won't boot from 3 recovery dvds, or reinstall, goes to same screen. Gateway DX4320, AMD Phenom II, Stock hardware
I recently tried to build a computer and failed epically. So I put my hardrive back in my old PC. Upon booting the PC it runs fine until it reaches :starting windows".
I just completed a new build and windows 7 does not install. I have an MSI k9n6pgm2-v2 mobo with athlon x2 7850 cpu and a seagate 1 tb sata hdd. POST and BIOS setup run fine but windows 7 freezes at starting windows screen?
Last night, my laptop randomly shut itself off. When I tried to restart it, I get to the Windows Loading screen and a line of color moves across the top of the screen and freezes in the top right. I tried pulling the battery and starting up, starting up on just battery power, re-seating the hard drive, re-seating the RAM, pulling one DIMM and then the other and starting up that way. All of them have the same result. I ran everything in the automatic startup repair, still have the problem. Trying to run chkdsk and sfc from startup repair said I was pending a reboot for something and it couldn't run. Tried to go into safe mode with networking and it hangs after reporting halmacpi (I think).
I pulled the hard drive and connected it to my desktop, I could see everything and am currently backing up 100GB of data, so it doesn't appear to be a problem with the hard drive. My next thought was to go into the repair console and see what I can do, but it's a Dell that came with Vista and a free download of 7 so I don't have any media unless I borrow a disk from work.System is a Dell E5500, Core 2 Duo P8600 with 3GB RAM.I did go through some old posts about similar sounding problems, but since they all appeared to relate to desktops, I wanted to post fresh.
running Windows 7 Ultimate, all updates installed, and Windows freezes at the Starting Windows screen quite often. The solution is to restart the computer, and it will always boot up successfully the 2nd timed say this happens for at least a third of startups, if not half. I have tried anything to fix it, but sitting at work with a minute to spare, and thought d ask if this was a common issue with an easy solution. If not, is there some log file I can check to see what going on?
I have been trying to CLEAN INSTALL windows 7 64bit or 32bit. Ive tryed both but neither seem to work. I've made a bootable USB with both iso's. I've burned both iso's to DVD's. With every try to install it i get the same results. It gets past the "windows is loading files" screen, then once it gets to the "starting windows" screen the 4 orbs show up start to make a circle and freeze. It doesnt go any further.
It all started when I decided to upgrade to Windows 7 x64 from my Vista x64. I had nothing of importance on the computer, so why not do a clean install and start fresh? It installed fine and rebooted several times until the computer had the Setup Is Checking Video Performance, it froze on that screen. I had to reboot it and now here is my current issue.....
Installation is going fine, goes to Completing Installation and then reboots..Then shows a black screen with blinking cursor for 5 minutes. Then restarts itself and has Windows Recovery Error. I chose Start Windows Normally and it goes to Starting Windows screen with the logo. I've tried letting it sit there for 30 minutes until it restarts itself and states..Windows failed to start. A recent software or hardware change may be the cause..etc etc..
So basically it's just a constant cycle of Starting Windows screen and Windows Recovery Error screen Unless I press f10 to go into the Boot Options.
Windows 7 hangs up on start up and after about 10 minutes goes to password. Once the password has been entered it goes to Welcome. the Green circle to the left of the W rotates and then stops.
Yesterday night my laptop installed an update and I remember it prompting me to restart my computer. Instead I chose the option to postpone the update. I erred when I forgot to restart my computer before going to sleep and instead had put it into sleep mode. Upon resuming windows, my screen was black and there was an error (which I failed to note but it was something about "logging in").
I tried force-powering off my laptop and upon reaching the "Windows Starting", I notice that the logo freezes. The computer appears unresponsive but after a couple of minutes, I am taken to my account log-in screen.
I read somewhere that this might be the result of a corrupt C file. Will a system restore fix the problem? (On the system restore there is a timestamp for "Windows Update" of type "Critical" that was installed around the time I postponed the restart). Is there a way I can scan my computer for corrupted files?
I have compaq presario sr1630nx and I have an issue that started after I opened the case and used my compressor to blow the dust out of it its not the first time ive done this like 4 times to be exact. My machines issue starts when I turn it on the fans go on but the cpu fan runs the loudest and it displays nothing other attempts it turns on normal but still nothing on the display. After idk the twentieth attempt of turning on and off it finally boots up normally, but I cant do nothing major like go on the web to long because it freezes right away. i could listen to music but it will eventually freeze after fifteen minutes or the display will turn to an orange or blue screen. The pc does have some upgrades like a graphics card for two dvi inputs and power supply which were done about a year ago.
Well, as the title suggests - I have an AGP HD2600, and whenever I install the ATI Display Driver (any version, from 7.10 right through to the Windows 7 Preview Drivers).
The install process itself proceeds fine without any issues (although Device Manager never recognizes my card - always calls it a VGA Adapter) but whenever I reboot after installing said drivers, it freezes at the Starting Windows section - right at the part where the desktop should load up.
I've tried compatibility mode, I've tried disabling enforced driver signatures, but the only thing that lets me boot after installing the ATI Drivers is to system restore back to the crappy VGA Adapter generic driver.
OK, trying to put windows 7 on a motion m1300 tablet. 1gig ram 1ghz cpu and 60gb hard drive. due to the bios being limiting install from xp desktop is impossible, so using an external disk drive i am trying to do a clean install, but it just stops at setup is starting, i know that seven will run on these, seen it with my own eyes, but i cannot get setup past this part.i have a feeling its the graphics driver, but getting into device manager from the language screen/ click here to install screen hasnt worked. its not in the system32 folder and so i dont know where to lookedit: before its asked, yes the disk is good, and i cant use a usb because the bios wont alow it. also the bios are up to date
I have a Toshiba laptop, that always freezes randomly. It worked fine up until about a week ago... I can't do anything, I start a program or a game, or open the internet and it freezes usually within five minutes. I can't do anything to fix it, like move the mouse or press control alt delete.
I recently got a new desktop computer with Windows 7 64-bit version 1.0 Everything has been working fine until yesterday when I downloaded some updated for Adobe and had to restart. Since then no matter what I do I get frozen on the Starting Windows screen, no logo shows up (I can't recall if it is supposed to) and just sits idle.I have tried booting in safe mode, went to ABO and tried to repair (when I do this it will load files and then go to the same Starting Windows screen), and have tried any other options that seemed relevant. I have also used F5 and those options do the same thing. It did come with a Recovery disk but when I try to boot from this it just gets frozen on the Loading Files screen!Because it is so new I really don't have anything that I can't get again, is there a way that I can format in my predicament? I am hoping there is a way I can get into DOS and initiate it, just don't know how.
I came into work today to find my computer frozen (I could move the mouse, but could not select anything or alt+ctrl+del) I held the power button in, and restarted the computer in safe mode. The computer froze on the "starting windows" screen, with no progress on the progress bar. Tried the same thing again, but started windows normally with the same result (single red pixel in the windows logo appears). Booting from the system recovery disk brings the same results. Booting to Safe Mode w/ Command prompt results in the system hanging while loading "windows/system32/drivers/avgidseh.sys" All system diagnostics have reported no errors.
Having an issue with windows 7. I few days I ago it starting just randomly rebooting. Then on reboots it started going to a black screen.I ran my dell diognoatics and it says all the hard ware is ok. Popped in my win 7 disk and ran my startup repair.Now windows 7 is loading, but now of the desktop icons responds. If I hover the arrow over the windows icon in the lower left corner of the screen, I just get the spinning blue icon? Nothing responds.Can I reinstalling wimdows without it deleting my c drive? Running win 7 home n a dell xps 8300.
I recently installed poweriso and magicdisc on my computer then I rebooted but windows started to hang at shutdown so I just forced a shutdown, now windows is hanging up upon restart and the same happens for safe mode. I'm thinking the problem might be magicdisc cause it said drivers were not found and safe mode was hanging around the loading drivers part or that I made a virtual drive.
Also I'm attempting to do a system repair via windows disc
Edit: Windows repair just finished and the problem signature was Problem event name: startuprepairoffline Problem signature 01: 6.1.7600.16385 Problem signature 02: 6.1.7600.16385 Problem signature 03: unknown
i have a problem with its starting,it has been installed properly and works perfect when there is windows cd in its cd rom,otherwise it does not start and says operating system not found.
I have a laptop and I cannot get it to start. When I go into start-up mode (Esc key at start-up) I have two options:
Start-up Repair (Recommend) Normal Start-up
When I do Normal Start-up, it lockes up on the Windows Screen. When I do Start-up Repair it locks up on a black screen.I don't have the back-up discs that were created for this specific computer at the moment (they are at another location at the moment). However I do have Windows 7 upgrade discs here from another computer.
It started with me interrupting a startup forcefully (which I now regret badly), then "i restarted it, but it gave me the information;"Windows failed to start. A recent hardware or software change might be the cause". I was given the option to either 'Launch startup repair' or 'Start windows normally'...If I select 'Launch startup repair', it leads me to a blank screen with a cursor then stays there until forever, if i select 'Start windows normally', it leads me to the Microsoft logo/'Starting windows' and just stays there for a while until it restarts." However, after the microsoft logo, I can see the screen changing for a split second, I can't see what it shows clearly a blue screen?
I have windows 7 already installed on my pc but i also want to install xp and for xp i went to bios and turn ahci to native ide but when i try open windows 7 in ide the windows is not booting then i launched startup repair no use is there any way to work windows 7 on ide without reinstalling it on ide ?
I installed Windows 7 (x64)/(x86) on my PC a while back without any problems at all. Now lately, when I start the computer up for the first time, it just wont start. Turn my monitor on and it says "No signal". I can only get the computer to boot up when i do several restart button pushes,So I figured it might be the video card drivers that are problematic and I installed the newest ones that I found from the official site(my graphics card is an XFX 9800GT). It didn't help, maybe relieved the problem a bit but I haven't really noticed it. I've opened the computer case up and tryed to push the Graphics card into the PCi slot further,is this a hardware or a software problem? :S I tryed searching for fixes for this but I got bored of searching too fast so I made this thread I'd like to get a quick fix, it's taking me 5-15 minutes to start up the computer every time, it's bad when I might be in a hurry someday
After i press any key to reboot from DVD, the windows is loading. But when it reach to the screen where we suppose to select language, currency & time format and keyboard layout, the screen become stuck. Mouse cursor doesn't appear and keyboard also not available to use.
When I start windows 7 home premium 64, just before the Starting Windows screen comes on some text flashes and I can't read it. What is that and how can I see what it says, I tried some of the F1, F2 buttons but not all. I might have tried F1 but I could have hit F2 instead so I could be wrong F8 was not a solution.
Let me know, new comp, not alot on the 1 terra drive. It is a HP H8-1234 AMD FX 6 Core
My old HDD was fried so I decided to use my External HDD to boot off. Afterreformatting the drive I have installed it into my laptop and have attempted to install Windows 7 64bit and its all going great until after the starting windows screen and then it just turns black with the cursor. What I have tried so far....- I have reset the BIOS to defalt-Cleared the CMOS- Checked the RAM (even left 1 2gig stick in and tried that?)
