I'm using Windows 7 Ultimate and my problem is windows cant determine ISO image,,it asking me to go internet....it started when i install Active@iso burner and burn some disk and after uninstalling Active@iso burner Windows 7 cant determine the ISO image file.
View 7 RepliesI am given a task to install win 7 in lab having 100 Pcs running already win XP, I know it will take a huge time. I want to know that is there any way to execute directly Win 7 iso image file in XP after copying in it so that I will not install win 7 again and again one by one in each pc.
View 2 Replies View RelatedI have a Windows 7 machine that i have installed on it all the neccesery programs that i need. I have about 10 computers with the same hardware that i would like to put on them the same Windows 7 as i have in the prototype machine. My question is:
1: what kind of porgram can i use in order to do that easly.
2: my windows 7 is activated with a KMS server on my network, is it suppose to be a problem?
I have a new computer and a backup computer, different hardware (the particular kinds being irrelevant). I also have two Win7 licenses. At each backup I would like to save an image file from the new (primary) computer, restore it to the older one (which I know works with Win7x64), and tweak anything needing tweaking to be able to boot to the old computer under the second license. This saves me the work both of performing sysadmin on the old computer and of backing up the old computer.
View 3 Replies View RelatedOne of my drives in raid0 crashed and fortunately I had windows 7 x64 backup activated and running daily. After recreating the array with the remaining drives, I tried to restore from the external usb drive but it didn't work. Apparently the problem is that I had been running "file backup" and not "image backup". Probably because when I configured backup for the first time, it asked to back up all my drives which was not possible and not needed so didn't check the image backup button.
Now the backup set is visible only from within windows (I set Windows 7 again up) but NOT from the restore part of Windows 7 setup / recovery disk. Files inside the backup set are not .vhd but zipfiles. All my c: drive files actually ARE inside the backup set, but running restore will restore all the crap folders (like c: vidia) except from the system folders like c:windows, c:program files (and x86), c:programdata etc.
Any way to restore these? I am thinking of the possibility of somehow restoring all the files and running windows repair on top of this to actually make c:drive bootable again. My users folder is not affected as I had moved it to d: but this presents the additional challenge of being able to actually make the system see the users folder....
I bought a laptop with an OEM serial key and I got windows home basic with it. My internet has limitations and I cannot afford to download a 3 GB .iso or image file of windows 7 home basic. Incase my system gets corrupt or anything happens I would like to have a backup of my whole OS, so is their any way to extract the whole OS from my computer to just one ".iso" file? which later I can convert into a bootable USB flash drive of disc. Plus if possible can I make the iso file which contains my OS and also all the drivers pre installed?
View 9 Replies View Relatedhow can i make ghost image file of windows 7.
View 1 Replies View RelatedIs it possible with Win7 to change any picture (Jpeg, png, bmp etc) into an icon file to use for a folder image?I just realised that its not an actual folder... its a shortcut which has a folder as an icon, Its actually a shortcut to a folder on another drive, but I'd still like to change it to an image I choose.
View 4 Replies View RelatedThis is going to show what a novice Windows 7 Ultimate 64-bit user I am. From previous information such as a 200 MB System Reserve area that this must be an early version. Since I've installed it I've downloaded all Microsoft updates. Can anyone tell me how to find the exactly what Windows I have, the SP level and revision. What is a K or a KM? I've never specifically was prompted to make this version change from a trial version. It has been authenticated by Microsoft.
View 6 Replies View RelatedMy Windows Explorer keep "not responding" everytime I boot up my computer and click "My Computer" icon. This happen after I install Auslogics Boostspeed and Wintools.net. I have uninstalled both software but the problem still there. I end the process (explorer.exe)via Task Manager and re-run explorer. Sometimes it worked and sometimes it doesn't, or need to re-run the process to make it work.
Then, I switch to Safe Mode. Windows Explorer runs fine. Now, I know something that is running on "services.msc" cause the Windows Explorer to crashed. I downloaded SlimComputer from Softpedia.com and run its Optimizer. I set it to SuperCharged and some of the services changed to manual. I restart my computer and the problem solve. I change the setting again to its original, the problem appear again, then change to SuperCharged back, the problem fixed. How to determine which process/services is causing the Windows Explorer to crashed?
I've been having alot of trouble with my brand new pc, having BSOD, caused by 2 drivers, tcpip.sys and e1x62x64.sys, i was on my way to fixing this, when i posted over on Sevenforums and got some help from the guys there, but i had another bluescreen, and my system did a CHKDSK on startup, this screwed EVERYTHING up.
View 1 Replies View Relatedi was trying to learn formatting windows with usb drive.. i came across some methods in which we need to locate the iso file of the os..what is it? i have a windows 7 cd..[URL]
View 8 Replies View RelatedHow do I find the files windows searches for when starting up?
View 2 Replies View RelatedI have a small problem tha I have been working on for 2 days, and I am stuck. I have a folder on my desktop that will not delete. The folder is empty, and windows recognizes it as a missing folder. I have attached the image of the error message. I have tried file shredder, chkdsk, defrag, and ran an elevated command prompt and deleted the 8.3 name, but still there.
Untitled.png 257.41K 11 downloads
Is it possible to edit the .ISO or anyother Image file with some software? I created a .ISO file but i forgot to add some files so i'm looking for a software that can inject files or folders into the image file or we can simply open the file in a particular program and edit them.
View 5 Replies View Related2-week old Sony I7 laptop operating okay but slow and odd things not working correctly. Example is selecting START-Printers & Devices..>No icons shown despite working printers, external drives, etc..Slow overall considering horsepower of system and since OEM software my backup boot disks self-created likely to have same errors? I have run Cleaner which I have now read although fine product that it is NOT recommended to run any. Question is is it best to get all registry errors corrected by smart tech folks or just bite bullet and get a known good Win 7 disk and install it new?
View 5 Replies View Relatedhow to insert jpg image into a thread.The thread has not yet been started but require information before s doing.
View 1 Replies View RelatedI am Last night when I get home go to start computer and there is a error about missing dll file, then aas I click the error more missing file errors keep coming up, gets progressively worse until PC does not start windows. Ok, that's cool, I have backup and disk image on another drive in computer, no problem right, WRONG!!!
So pop in the windows 7 disk, go to restore disk image, error!!! Got a few errors while trying once I got one when I checked of not to include one of the disk, the one I keep getting is that there is not enough space on drive for restore. Now the disk the image is on is 150 GB, the disk trying to put it on is 500 GB, so why the problem???
So keep searching on my laptop and find a suggestion to do diskpart-clean. Go through every suggestion I found to use diskpart such as clean. Still not working. I install Windows 7 on the drive which works, install backup files and is there. But I want the image to restore. So in the new install I cant get it to do a image restore, so I try from Windows 7 CD again, Fail.
Our small office has several laptops, some with Intel chips, some with AMD. I'm trying to find a way to create an image for each laptop type that would include Windows 7 and MS Office.
I've looked around a bit, and I'm finding plenty of info on creating the Windows 7 image, but can't really find anything in layman terms for also including MS Office and any other necessary programs (snagit, Adobe Reader, etc.) to include or how to include, in the image.
Obviously, free (shareware) software is good to do the job in order to keep the cost down. I think I might even have a copy of WinPE I inherited from the person that was there before me, unfortunately, no documentation....Like I said, I've never done this before and I could use a step-by-moron-proof-step process if one actually exists...
I make use of the Windows 7 Backup and Restore programs.
Automatically everyday a backup is scheduled.
This backup is configured to contain all user files and a system image.
Now I have tried to find the system image, but I don't know what file extension the image backup should have.
In my backup folder, below, only two .VHD files are present, and a bunch of XML Documents.
X:\WindowsImageBackup\XXXX\Backup 2009-11-04 160010
Can someone explain me in which files the backup and restore programs save the backups?
Also I like to know where I should look for, to know for sure my backup is done successfully.
How to Burn a Disc Image from a ISO or IMF file in Windows 7 ?
View 0 Replies View RelatedI have a laptop sony vaio y series without cd/dvd drive. my questin is i want to make my window 7 image file.
View 2 Replies View RelatedI just purchased an Asus X54C laptop that came with 7-64bt, the first thing I did was run the backup/restore and created a system image roughly 24gb in size on my logical partition of the HD.
I then installed the customer preview of Windows 8, which I was under the impression defaulted a dual-boot setup as long as you have Windows 7 and choose to keep all of your existing data, which I did.
Long story short, my Asus didn't come with the restore media, which I guess a lot of laptops don't come with. So, I was able to get a copy of Windows 7 so I can at least install over my Windows 8 so I can then start over with my backup that I created.
The version of Windows 7 is x86, but my backup is x64, I restarted into the restore screen and was shown that yes I have the image for the C drive, but I cannot restore for some reason.
Do I need to be on Windows 7 x64 to use my restore image?
Can I use easy file transfer from a hard drive back up image of XP? I can mount the image on my win 7 computer. Can easy file transfer pull the user profiles, data, pics, music,doc, etc from a mounted image in the same computer?The image is no longer restorable to any computer.
View 3 Replies View Relatedcan someone please help me to suggest a program to convert a jpg file to a vector image
View 5 Replies View RelatedI want to use a very simple unattend file to image Windows 7 and deploy with Ghost. My issue is that I need the install to PROMPT me for a computer name, THEN have it perform the Unattend Join to the Domain. I am hoping to only need the Specialize and OOBE passes, but if I need more fine - this is my only issue.
If I let it select a randam PC name, then it joins the domain fine, but if I take out the computer "Tags" which seem to be the only way to get it to prompt, it has already tried to join the domain unsuccessfully. Please advise.. All over the net people are having this problem.
I'm using the latest WAIK download. Here is my unattend file: THANK YOU IN ADVANCE FOR YOUR HELP. I don't know why my file came out in backwards order, but I don't believe that matters, it still will do the specialize pass first.
I have a problem with Microsoft Word 2010. When I save the file as PDF file, the Word 2010 saves the file as PDF but the background image is in tiles, instead of stretched. Also, in the document, the background image is stretched. But when I save the document as PDF, it applies the background in tiles.
View 1 Replies View RelatedI have this laptop with Windows 7 as the operating system and with a capacity of 500 GB. My HDD was making loud noises and weird noises so I brought it to the shop and they told me to change the HDD because it might die anytime. So I did a full backup on my external hard disk, meaning that I cloned my laptop. I changed my 500gb HDD with a 240gb SSD. And when I tried to restore my backup files into the new drive, there's an error: "no disk that can be used for recovering the system disk can be found".
So I did some research on the internet and found out the reason of the error: it's because the image created was from a bigger drive than the new drive I put into my laptop. Even though my backup files are only about 100gb, I still cant restore it to my 240gb SSD because the image created was from my 500gb HDD. I am going to copy my backup files into an external hardisk with a capacity of 200gb and then backup from that drive and then I will restore it into my 240gb SSD. Will the backup file be considered as a backup from the 200gb drive or from the original 500gb HDD?
I am preparing for MCTS 70-680 (Win 7 configuration exam) for doing labs I am using VMware workstation 7. Every thing is going OK but when I try to copy the created image wim file to destination computer. On that particular destination computer I cannot access the e: drive in which I have the Windows PE (pre environment) disk.
The command I use is like that :
x:e:imagex.exe /apply f:capturedimage.wim 1 c:
I got error the system cannot find the drive specified.
I've got Windows 7 x64 installed and my power went out during boot today. After restarting, I got this error during boot:
"BOOTMGR image is corrupt. The system cannot boot."
I put in my Win 7 disc and tried to boot from it, but after pressing "any key to boot from cd / dvd .." I get this error:
"The file is possibly corrupt. The file header checksum does not match the computed checksum."
All the fixes I can find online have to do with using the recovery console, which would be awesome, if I could actually get to that point. I even tried my old Vista and XP discs, but I don't even get as far as above. The computer just stops with a small cursor near the top, often having to be powered off to restart because ctrl+alt+del doesn't even work. A fresh install is just not an option because I have important business data on the computer that I can't afford to lose. Also, I literally couldn't do that even if I wanted to since none of my windows discs will even load.
i've been spending ALOT of time reading and soaking up information, trying to learn as much as i can about how all this glorious tech stuff works..my next goal: to be able to determine how to identify which type of wifi i need to use, B/G/ or N so ive learned a fair bit about the IEEE 802.11 set of standards. From previous threads, i was instructed to make sure i only broadcast for the types of devices i have.
View 7 Replies View Related