Windows 7 Backup To Seagate 500mb?
Jan 1, 2012
Continuing from a previous discussion, I backed up this computer (HP Pavilion desktop 2.7 mhz 6 gig) to my external Seagate hard drive, using Windows 7 backup routine, (after re-formatting the Seagate). Everything has worked just fine.I did a second backup today, and when I went to look at the external drive, it appeared as if no changes had been made (same date as the 1st backup to the 3 files on the disk). So I opened up "Mike-PC" and aha, the next file had today's date. OK, that fine, and total disk space used equals total disk space used on the internal hard drive. So everything's cool, but I wish the backup routine would leave a "last modified" label up front.If I use this same external hard drive to back up my wife's brand new HP laptop, will it clobber my backup, or will it make a new file?
View 1 Replies
ADVERTISEMENT
Dec 8, 2010
I recently purchased a Seagate external drive. I created a backup of windows to the disk using the Memeo software provided by Seagate. I tried to restore a file and I keep getting error message "The files cannot be restored at this time / try again later". I thought maybe it was still backing up but it states the backup is complete. I went to the seagate/ memeo support site and its basically useless. Of course they dont have that error message referenced.
Should I delete this Memeo software completely and let windows run the back up instead? I'm really confused now. I've been reading a lot of people have problems creating a backups with windows7 too?
View 3 Replies
View Related
Apr 28, 2012
I just purchased a Seagate Go Flex 2TB external drive for backups. It comes with software called Replica(v.5). I have been reluctant to use it due to reports (seen post purchase) that it causes system crashes especially with right click and that it slows system performance terribly. I have a new win 7 pro 64 bit (OEM legal) DIY build system.
View 7 Replies
View Related
Sep 19, 2011
I have a new computer with windows 7 been used freeagent fine with old computer, but when I try to backup(restore) old files or sync it keeps telling my I need to reconfigure as I have vista?? is windows 7 really vista, I was able to move old quicken files but not itunes or outlook files?
View 2 Replies
View Related
Jan 23, 2012
Recently purchased a Seagate GoFlex Home NAS drive and having troubles getting my Win7 laptop to see it on the network. Here is a basic rundown of what works and what doesn't:I can ping the IP address from the LaptopThe NAS drive appears in the network map but not in the Network heading in explorerI can access the NAS drive through the browserI have full access to the NAS drive(mapped drive etc) through my Vista desktop on the same networkI can access my Win7 Laptop from my Vista desktopThe desktop's name appears on the Win7 machine but I can't open it (Windows says "Windows cannot access \DESKTOP")I have setup network discovery, file and printer sharing etc in advanced sharing options.
View 3 Replies
View Related
Oct 24, 2012
I am running Windows 7 on my computer and have somehow used windows security to lock my seagate external drive. The computer can tell that the drive is there but I cannot access anything on the drive and also cannot write to it. I have tried talking to tech support from Seagate and they said that since I have used a third party program that I need to contact them. It is difficult to get a response from them. I am a novice when it comes to things like this.
View 7 Replies
View Related
Feb 27, 2010
Had Windows XP installed on an old Seagate Barracuda 7200.7 120GB.Formatted the drive for a clean install from Windows 7 DVDNow I get this:
"Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu."
It is, and yes it can. And why is it even saying this when the installer can format and partition this drive till it turns blue.It gives me the option to "Load Driver" but there are no drivers for this HDD, it's all pre programmed in the motherboards.
View 2 Replies
View Related
Jul 11, 2011
I have a Seagate external hard drive filled with photos from a mac. I am now trying to copy those onto a pc. Windows does not recognize the drive
View 5 Replies
View Related
Dec 21, 2012
Problem with my acer m4 series computer. I recently installed backtrack linux and then fedora onto my seagate barracuda st3500418as hard drive. Now I deleted the partition containg grub and the extended partition containing fedora. My windows 7 installation was corrupted all along the way.I want to repair or freshly install windows but it says I need to load my own drivers. Whenever I boot into safe mode or start windows regularly, it flashes a blue screen and then reboots. By the way, I have the installation disk.
View 10 Replies
View Related
Dec 17, 2012
I have plugged my old Seagate external hdd into my new Acer with Windows 7 64-bit Home Premium. I am trying to pull files on to the new computer. It says I don't have permission to access the folders. How do I go about getting that permission while it is plugged into the new computer?
View 8 Replies
View Related
Nov 17, 2011
I've had a sudden loss of my hard drive space. I've deleted alot of stuff, like over 20GB, more then just a few times and it just disappeared in less then 2 days. I've read some topics here with the about same problem and tried what they sugested there: to use software like WinDirStat, TreeSize Free and SpaceSniffer. But they just won't show me my whole hard drive. The stop at 50% and show it as if they have scan the whole 100%.
View 3 Replies
View Related
Feb 20, 2012
Me and my fiance just finished putting together her first real gaming computer and we wanted to use a Patriot 64g SSD to put win 7 on and use a 1TB Seagate drive for all the rest of the storage. The installation of Win 7 onto the SSD went nice and smooth but when we get into windows it is not detecting the 1TB HD at all. Funny thing is that when I go in to the SSD properties, I can see the Seagate under the sharing options. The only info I have found is how to clone off an existing hard drive with Win 7 on it not how to do a fresh install on 2 new drives.
View 1 Replies
View Related
Nov 14, 2012
I tried installing 64bit Win 7 Ultimate on mirrored 3TB Seagate HDD using a Digitus RAID card and failed. After the failed attempt, I disconnected the HDD and plugged the primary HDD to an on-board SATA connector only to find its capacity reduced to 750 GB. Windows Preinstallation Environment shows the same size and running clean produced no effect.
Something odd I noticed after running diskpart is that no matter how many drive is connected to onboard SATA, it only shows the 750 GB and the PC name is MINWINPC.
I`m completely stuck with this and cannot figure any solution. Please anyone help me restore the original 3TB size.
View 6 Replies
View Related
Aug 23, 2012
When you wish to recover your system using this utility, do you use the Windows program at desktop or the rescue disc I created from the program?The reasn I ask is because I used to have better luck using Acronis' disc rather than the program and wonderd if the same applied here.Also, does the backup remove the existing one so that you only have one at a time or can you have more than one.
View 2 Replies
View Related
Nov 1, 2010
Is there a way to use Windows Backup to backup to a network drive?
View 6 Replies
View Related
May 8, 2011
I backup 100GB of data with Windows Backup and over the time where I do all my backups there is like only 30GB of data which changed from those 100GB and also new files were added. Now my external drive is full. When I now delete the very early backup, the first one where the 100GB of data was saved, will it delete then ALL those 100 GB, or will it just delete the previous versions of the files which were modified AFTER that time, which are in this case the 30GB I talked about? Because otherwhise I would then have in the end an uncomplete, messed up backup.
View 9 Replies
View Related
Aug 8, 2009
I currently use Vista Ultimate. I am preparing to move to Windows 7. Is it possible to restore files from Vista Backup and Restore Center to Windows 7 after a clean install?
View 3 Replies
View Related
Dec 7, 2010
I'm using Win 7 Pro and want to schedule several backups to my NAS. With Win XP, I was able to schedule multiple backup jobs, which makes things easier since I have 116 GB of data. I like to backup my documents, email files, etc. every week, but my photos, MP3s, etc. don't change as frequently so once a month is fine for that. Not surprisingly, the media collection takes much longer to backup, which is another reason I try to separate it from my "regular" backup.Unfortunately, Win 7 backup only seems to allow one backup job to be scheduled, which seems awfully limited. Am I missing something? Are there other free backup utilities that would work better, or do I need to shell out some cash?
View 4 Replies
View Related
Apr 13, 2012
Currently my PC is set just they way I like so I thought I'd do a backup, the idea being that should something go wrong then I can just use that backup (on DVD's) to do restore my PC to the 'now' settings.
View 3 Replies
View Related
Oct 19, 2011
Windows 7 Backup always stops around 58% when it tries to backup "Boot (C" What should I do?
Windows Sicherung bleibt stehen bei 58% bei Systemabbild von "Boot (C" wird erstellt.
View 2 Replies
View Related
Sep 7, 2009
I recently upgraded from Windows Vista Business to Windows 7 Professional. The problem I am having is that my Seagate Freeagent 1TB drive wont load in Windows 7. I have to keep going to Device Manager and Uninstalling the driver and then plugging it back in so it automatically installs itself and then when I shut down the computer I have to do the process again.
I thought things that worked with Windows Vista were supposed to work with Windows 7.
Any solutions or help on this problem would be appreciated. PS I have already tried installing newer drivers, I have the latest ones, and I know this is a software issue as I am able to access the drive as normal after re-installing it each time.
View 4 Replies
View Related
Aug 2, 2012
Recently my PC just randomly crashed and upon restart, would not barely get past POST screen and get stuck on "Detecting IDE Drives...". I isolated the problem to my Seagate main drive. I went into diskpart and tried list disk, but the drive would not even display there. Does this mean my drive is pretty much dead?
View 2 Replies
View Related
Apr 23, 2012
Seagate provides a FREE download of their Seagate DiscWizard It is Acronis True Image, but slightly tweaked for Seagate.I have used it many many times for XP, and it is fairly 'idiot proof'.I cannot say the same for Windows 7 Imaging.Creating the image is 'idiot proof'Restoring the image is a mental challenge for me.Say I had just one partition on a drive, and I create an image.When you try to restore an image, you have to choose from three checkboxes
- CMD 100 MB
- OS (your real partition)
- MBR
there should be one box that you could tick to restore my simple one partition drive, BUT THERE AIN'T So I have to decide which of the three checkboxes to tick I would like to tick the lot, BUT YOU CAN'T You can only tick one at a time.I do not know which one to do first.And if that was not enough of a problem, you have to decide whether to make it Active
(Do I make the CMD Active ?)
(Do I make the OS Active ?)
(Do I position the CMD Hard left)
(Do I position the OS hard left)
And if that was not enough of a dilemma, You are given two ways to Restore the other two checkboxes
- You can do a mini reverse (Before allowing the Restore) to tick one more checkbox, OR
- You can Restore each checkbox one at a time.Either way, you still have to decide on making each Active, and 'hard lefting'.Needless to say, I got it wrong, and am about to delete all the partitions (CMD apparently being considered a partition) and try Restoring again.
View 4 Replies
View Related
Dec 28, 2010
i had to re set my pc to factory.when i plugged in my seagate ext hard drive, i cant view my documents anymore. it keeps saying i dont have permission to access the folder...i have tried renaming me as the administrator, but my head is a bit messed up with it now,, i'm not what you call a technical pc person
View 4 Replies
View Related
Jul 2, 2012
I recently purchased a usb 3.0 enclosure from silverstone model ts07b and a new 2 tb drive from seagate model ST2000DM001; the usb 3.0 card is from syba model SD-PEX20093. The problem I am having is that when I plug the enclosure into the usb 3.0 slot with the seagate hdd the computer does not recognize it, but when I plug in another 2tb drive from WD (caviar green wd20ears) the computer recognizes it. I know the seagate is not dead because when I plug the enclosure into a usb 2.0 slot the computer recognizes it. Now I need to know what I should replace, should I get a new enclosure or pci card?
View 1 Replies
View Related
Jul 15, 2012
I had a 2 TB, and 3TB Seagate Go HDs and decided they would be best used as internal drives, turns out they both crashed completely upon SATA connection in the motherboard, I first guessed probably due to the difference in boot record. Upon reformatting in NTFS, I have found that the drives run very sluggish, I have been debating on just buying a new USB drive and copying my files, then getting rid of these 2 HDs. This doesn't make sense to me as I used to think all HDs were the same, does anyone know any reason why these 2 external drives are killing my system performance after they were made into internal drives (also why would they completely crash before).
View 1 Replies
View Related
May 21, 2010
Quote: Seagate has confirmed plans to release a 3TB hard disk drive later this year. However, the 3TB drive will only be recognized by 64-bit operating systems, such as Windows 7, Vista and Linux. "Not only that, but you may not even be able to see 2.1TB of a 3TB drive when using Windows XP," wrote Thinq's Ben Hardwidge Read More: Seagate says 3TB drive requires 64-bit OS | TG Daily
View 9 Replies
View Related
Aug 28, 2009
In Windows 7 RTM I have had trouble with one of my two HDs, a Seagate 300 GB. During Windows 7 installation, installer "could not find drivers" when the Seagate was the first SATA drive. Once the Western Digital drive was set as the first drive, system installed ok.
After installation, the Seagate shows in the Disk Management as 300 GB, but if look at contents with Explorer, it has only 125 GB capacity. Can this be a Seagate firmware problem? (Windows 7 RC earlier had no problems with this drive when the system had Win7RC + Vista + XP.)
View 2 Replies
View Related
Sep 18, 2012
I must be missing a step somehow, and I'm not so tech savvy anyways, but.. I have an '08 dell xps 420, recently installed win7 ultimate x64, have 6GB ram, backed up oem internal to 2tb external, also did windows easy transfer copy to ext, now replacing oem hitachi 750mb internal w 2 1tb seagate barracuda hd's...booting from cd-rom drive works fine, but cannot seem to get raid0 config worked out nor load drivers for drives.
View 2 Replies
View Related
Jan 19, 2013
I installed 3t Barracuda hard drive and I can`t see the location of this driver with the other local drives
View 2 Replies
View Related
Aug 9, 2011
I created an image using the Microsoft Backup and Restore tool in Windows 7. I saved the image on a network shared folder.I then went to the Advanced Recovery Methods in Windows to restore my image...that I just created. It restarts the computer and goes into recovery mode, I point to where the image is located, I entered the network credentials and it give me an error. "The Specified network resource or device is no longer available. (0x80070037)"
View 5 Replies
View Related
