In trying to revive my 2004 Dell Dimension 8400 [P4 630 3.0GHz, 3GB RAM, WD 500GB, Quadro FX570]. The P4 630 was -I think- the first 64-bit version. I ran the Win 7 compatibility test and it liked all the components.This was originally using XP, but I decided for it's second life to use Windows 7 Ultimate 64 bit.After a careful install of the OS, I added AutoCad 2007, Corel Technical X5, WP X4, Sketchup and a few others. The C: partition is 100GB and contains about 35GB.The 8400 ran very well and actually improved it's Passmark score slightly over the previous XP-64. The problem is, this setup requires running system restore almost every day. Plus, it seems to delete all but the last three restore points. Today, I ran restore twice and both times Win said the restore was unsuccessful.I was resigned to reinstalling everything. However, when restarting after the second attempt, it ran fine. I don't understand this aspectThe one questionable component is the sound card, which is an e-mu 0404PCI. This has XP ans Vista drivers, but the drivers for Win7 are from Creative (owns e-mu) but listed as "beta".
I can't find out the reason for these freezes at startup (unable to start), I might be doomed to restore 3 or 4 times a week!I just can't trust this computer a the moment, waiting for the next disaster. Am I pushing this elderly computer by using Win 7 64 Ultimate? I can revert it to XP if its 'worth it.
I have had two separate computers with two separate o/s systems using Windows 7 ultimate, one installed directly from discs, one upgraded from Windows Home Premium. The restore has never worked on either of them. Another friend who has the same system has the same problem. It does work (or at least, it worked one time) in Windows Home Premium. Does system restore not play well with Windows 7 Ultimate 32x & 64x? Last computer was Dell Dimensions 4600 with 2GB RAM, 2 TB harddrive Windows 7 Ultimate 32x . The 2nd is a Dell Inspiron 2320 all in one with 8 GB RAM & 2 TB harddrive WIndows 7 Ultimate 64x . Maybe it is just Dell doesn't play well with Windows 7 Ultimate 64x? It does creat restore points manually and also automatically. Each time you attempt restore it simply never completes and the system message is always the same, Unfornately I forget what it was ended in 009. Dell was actually on line with me and trying their best and saw the system message but still couldn't figure out why it wouldnt work. We removed ALL the anti virus, we turned off firewalls, we used safe mode, none of them worked.
System Restore will not create a restore point or restore to a previous date & time.The error message was: A restore point could not be created: An error was detected in the Volume Shadow Copy Server (VSS).The problem occurred while trying to contact VSS writers. Verify that the Event System Sevice and the VSS service are running & check for associated errors in the event logs (0x80042318).Volume Shadow Copy is started & running (done in system events).Event System Sevice and the VSS service are started and running. But no cigar, SR still broken.
Does anyone know how to schedule/automate a rollback to a system restore point at a set time each day?What i'm trying to do is:1. Disable the standard system restore behavior for creating restore points when installing apps and drivers.2. Automatically/schedule a restore point to be created every morning. (probably using Task Scheduler)3. Automatically/schedule a rollback to that morning restore point every night.This should allow users to mess up the workstation during the day, and restore a working rollback point at night when users are not using a workstation.Updates are scheduled at nighttime, so before that happens, it should rollback to a good restore point, apply updates, then create a working "new" restore point with the updates in the morning....etc.
My Windows 7 System Restore doesn't restore. It allows me to set them and tells me they've been done. But on the couple of occasions when I've wanted to use one, no joy. Yes I know I could possibly do it in 'Safe Mode' but that isn't an answer as to why I can't do it in regular mode?
I lost 2987 emails by clicking on email tab in windows task manager All the emails disappeared so now >>??? wondering if Sysytem restore restores email as well with Win 7 are do I have to do like Ive seen ? Go to your documents folder and right click on the folder titled Mail the properties and then the previous versions tab.Click on a restore point from before it was deleted and click restore.
Living is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with lightening and my computer shut down several times, but I could restart it each time...except for the last time when Windows wouldn't startup. At that point, Start Up Repair came into play. Although I routinely backup on an external drive, of course I never did it this month-DUH!Results from SUR were error free (error code=0x0) on all the parameters tested, however there were the following error codes reported:"Unspecified change to the system configuration might have caused the problem." Failed: 0x1fRepair Action: System FilesFailed: x490There were more options to select for a recovery task, but I didn't try them as they didn't seem to be as salient as the two above.
Did a system restore in Windows 7 and my dual boot system (Windows 7&XP) won't boot. It's looking for a boot device. When I put in a Hiren boot 10.6 disk, the dual boot option is one of a number of alternatives, and it allows me to get into my pc. How can I get back to having the system work like it did before? So it boots to the dual boot option without Hiren.My SSD drive is the main drive for Windows 7 &XP. It has two partitions.
I can't seem to change my wallpaper, either by going to Personalization nor Right clicking on my wallpaper picture. It happened after I performed a System Restore.
I have tried googling it for hours almost, and tried different troubleshooting techniques, with out luck of course!
* Regedit - Made a new DWORD (Or something) With NoChangingWallpaper to 0 value
* "Ease Of Acess" tab in control panel. (There were some other mroe advanced options that had me cooncerned about mucking up, so I cautiously steered away )
So I cleaned my registry using RegSeaker and now my computer BSODs at the 'starting windows' screen, even if I try to start in safe mode. I created a backup of my old registry before cleaning and I can access it using the command prompt that you can access in the system restore options. However, when I try to update the registry with it I get an error message saying 'cannot import.
OK, so a couple of days ago, my HP desktop crashed and then went through the whole System Recovery loop(I couldn't login to Safe mode, wouldn't let me past the System Recovery Screen). Well I backed up the entire C drive using Backup your files in the menu. Then it shows you all the file types it will back up; i.e photos, videos, e-mails and bookmarks. So I did that to an external hard drive and it comes out to 143GB.Now comes my problem. I've been able to copy everything from the external hard drive using RecoveryMgr.exe which opens the WIM files and saves them to my C: hard drive under System Recovery Files. However it does not seem to work when it comes to putting in my old Thunderbird e-mails, contacts and such or in Firefox to restore my bookmarks, saved passwords.
I am trying to restore my computer because it launches into system recovery. After I get to the recovery options I tried to do system restore but it tells me there isn't enough space on the disk.
I have tried a lot of things and I can't get system restore to work. I don't need to use it but I would like my computer to be working since there is no reason for this not to work. I just keep getting ComPlusStaging failed to obtain original copy from %systemroot%/registration all the time.
This query is concerning how Win 7 Ultimate Scheduled Backup works.These are my needs.Often in the past, Windows 7 has become unstable in some way, such that different pgms including Windows Explorer, and other system tools become corrupt. I decide to re-install Win 7 Ultimate 32bit.I have an external 500Gb drive with an Acronis True Image Home 2009 full partition backup on it. The backup is a fully updated, fully game installed backup, and is way faster to use compared to the individual software installations. Since Windows 7 starts acting up about every 3-6 months for me, I replace it.Recently (last restore) I decided to let win Backup and Restore do a scheduled backup every 7 days. I let Win choose what to backup. I intend to let Win be THE backup to use to replace the OS when needed. I have always had problems running out of space where to let Win Backup to on some drives, so I dedicated a 443Gb partition to Backup only. This is on the other half of a 1Tb drive. (I know in some cases it is not wise to use the same drive, but I put all the important things on another physical drive) I have 4 drives, totaling about 3.8Tb. 2 have XP Pro, and 2 have Windows 7 Ultimate. The main C: is 487Gb, with 231Gb used space. The other half of it is N: 443Gb; on which the Backup is written to each week. The size of the backup is now 407.12Gb. The backup on N: is approaching TWICE the size of the used space on the C: drive! And within about a month there will be no more room.I want mainly to retain a pristine Operating System to reload, along with the basic games which are huge. This will save the time WHEN, not IF Windows 7 begins to fail again. (not saying it is a bad or weak OS, just that it fails for me for reasons needing replacement. If only it were as robust as XP has been in the past.)
1. How can I retain a PERFECT OS and games image to use as a basic unchanged original with Win Backup?
2. As Win gets corrupted, how can I know that the latest Backup I might want to restore from isn't corrupt?
3. Can Backup be set to not make redundant Backups that become so huge, yet maintain the original perfect OS and game set, such as a dated incremental backup that can be used to piece together a C: drive again?
4. How do I know that Backup isn't backing-up malware?
5. If I save the latest backup, and the first one, how big should each one actually be?
6. Can I get into the actual backup files individually to decide if I want to restore from them--the options are limited.
7. Win says that it will work "without taking up more than 30 percent of space on the backup disk". Out of a 443Gb drive letter, there is only 33Gb of space left. All done automatically.
8. Is the fact that there is a total of 4 OS's on this computer making the Backups so large? I would assume it is only doing the C: drive, as I would wish, yet something is getting copied over and over, likely. Again, possibility of the latest backup being corrupted is on my mind.
Short of cloning a new disk to replace the later corrupt one, updating it just prior to copying it over, the only other thing I can see doing is to only run the OS on the C: drive, making it easier to replace, yet that has many inherent problems with pgms not working after the OS is replaced, and needing to reinstall anyway.Sorry about the length of this inquiry, but you can see I need assistance.
I have been have some problems with my HP dv 8500 laptop. It has vista on it. I could not get any windows updates. So I backed up my files to a flashdrive and did a system recovery. I have files on the flash drive but cannot transfer them back to the laptop. I would love it if someone could guide me through the process.
System restore failed to extract the file. from the restore point. There was a disk failure during the restore. This might be caused by bad sectors on the disk. I get the same message, but with a different file name, with every restore point I try, and I have now tried all seven available restore points, going back to 30 Dec 2011. The computer was working perfectly until 3 days ago when it blue screened, and has not started properly since. It is a Corei5 with 4 GB RAM and is only 12 months old. I just dont believe the drive has that many bad sectors.
my Windows 7 after restoring it to factory configurations. I installed Ubuntu 12.04, the installation smooth as butter, but after a few days of usage, the GRUB system screwed up. After a LOT of problems I managed to restore my Laptop to its default configuration. Then, I tried to restore my personal files with the DVDs I made, but when the manager finished, it only showed a folder with all my files in it! And it didn't give me any option to restore these files or something!
XPS L401X Base Genuine Windows(R) 7 Home Premium 64bit (English) Intel(R) Core(TM) i7-740QM Processor 6GB 1333MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB) 640GB 7200RPM Hard Drive
Lately whenever i try to start my computer it pass the Dell Bios and then directly goes to the screen which states Repair your system or Start windows normally When i chose repair system , it start downloading windows files and then launch the windows , but hung up at the sky blue login window with only movable cusor . When i choose to start windows normally it gives me BSOD momentarly ( hard to see the message) and then restarts again . i tried with the advanced boot up options like repair my computer , all safe modes , restore to last good configuration but it does the same and hangs at windows loging sky blue window .I Tried to run the Dell PSA+ Diagnostic and it returns with 2000-0146 error . As per the Dell online solutions for this type of error ,I tried to reinstall the Hard disk but the problem still exist.
Using preinstalled Win 7 Home Premium 64bit on an HP 6813w Pavilion. The original hard drive, a Hitachi HDS721010CLA332 1Tb crashed.1) System Recovery discs was made along with a System Recovery with System Image disc.2) A more current System Image was made on an external hard drive.The Hitachi was replaced with the same model. Checked bios to make sure it was installed correctly.Under System Recovery, Image Restore, Select a System Image Backup there is nothing in the table to choose from as far as a source (disc drive or external drive).A) System Recovery (3 discs) has the HP preinstall file folder on the 3rd disc but is not read by the System Recovery program.B) Under System Restore, Image Restore, Advanced, it asks for a network or driver to be installed. That opens up the directory of C: which is the external hard drive. Under WindowsImageBackup the computer name is identified followed by three entries:[CODE]It seems to me the Recovery and System Restore discs are not functional. Am not a technical person but I have taken this as far as I know how at this point.Printed out all the instructions from HP and Microsoft to follow step by step but the failed discs will not allow me to move forward.
ive got a sony vaio laptop that worked fine until i dl a pdf file and tried to view it, the machine froze and i had to reset it, since then it will not boot, booting from hd it gets to the windows logo then flashes up a blue screen with text on it that stays on for 1 sec then it resets and starts again.ive tried the sony recovery tools that shows no partitions on the hd, system restore says there are no restore points.
I am using Windows 7 Professional (64-bit) 6.1.7601 Service Pack 1. I used System Restore to undo system changes to my computer. I want to undo this System Restore operation, but System Restore says there are no restore points.
I can create restore points. I just can't restore from them. I get this message:
System restore failed while restoring the registry from the restore point. The restore point was damaged or was deleted during the restore.
I have tried restoring in Safe Mode.I have deleted all restore points and turned off sys protection, rebooted and turned System protection back on.I have uninstalled Kaspersky (my system protection).I have made sure Volume Shadow Copy is started.
I am using Windows 7 Professional (64-bit) 6.1.7601 Service Pack 1. I used System Restore to undo system changes to my computer. I want to undo this System Restore operation, but System Restore says there are no restore points. How then can I undo this?
There were many, many restore points before. I have recovered the entire contents of C: with Recuva. What do the restore points look like?
I want to have a Factory Reset of my computer. In order to launch a System Recovery, I need to create Restore Discs. When I launch the Recovery Disc Creation, it says:"This computer does not have a burning drive, which is required to make DVDs. Please contact HP Support for asistance."My computer did not come with a build in CD Drive. Even plugging in a USB CD Drive will not make creating the discs possible. So. I ask you. How can I reset my computer to Factory Condition?
Computer Specs:
Windows 7 Home Premium (64-Bit) Model: HP Pavillion dm3 Notebook PC
edit: This notebook came with a Recovery Partition built in.
The other day I was trying to figure out what coral paintshop pro meant by security key, so I googled it. Something popped up and asked me if I wanted to download, and I wanted to say no, but my laptop's mouse is too sensitive at times, so I accidentally clicked yes. My computer automatically shut down right after that. Every time I turn it on now, it goes straight into System Repair and it doesn't work, it says it cannot repair. I've tried System Restore, but since that doesn't get rid of the documents that have been downloaded, it isn't helping either. My computer won't even let me enter any form of Safe Mode, it just goes straight back to System Repair.
My C: dreive is a 128GB SSD which devided into 70 and 50 GB.Windows and all programs are installed on 70GB, the 50GB drive is free.All programs are about 11GB, Win7 ultimate 64 is about 17GB so all together it should not exceed 30GB. Suddenly I found on one day that my user folder became 25GB without any reason. When looking into it and calculated all subfolders it even did not come to 1GB.So the C drive is almost full and I have no idea for the reason.
I need to do a system restore on my system because of an update to gimp won't run and I am trying to do a restore. But, when I do that every time it says it fails and that I should retry. I do retry and get the same result. What can I do to fix it? I have uploaded a pic of what the screen says.
I have tried to restore my laptop since it isn't working. When i try to go to safe mode, my laptop restarts itself. The restore disk isn't working for some reason and when i try to go to the repair menu, it stops at the blue screen without options to fix it. Can someone please tell me how i can restore my laptop another way?
