This suddenly began occurring about a week ago. The system runs fine, however if it is left for a fairly short period of time (15-20 mins) The program am I using will freeze and the cursor will change to loading. The task bar will then freeze if I try and click 'start', and I have to hold down my Power button to turn the PC offI have tried system restore, Defragmentation, and virus checks. Running
View 3 Replies[CODE]
View 1 Replies View RelatedThere are several threads about the network card going to sleep when a laptop is idle, but all of them I've seen just suggest the same things regarding various settings. I still have the same problem despite having set the following settings...
In "Change Plan Settings"
-----------------------------
Dim display: 5 min
Turn off display: 10 min
Sleep: Never
[Code].....
Are there any other settings I've missed that could be causing my card to shut down as soon as my display cuts off? Or is this a bug in Windows 7 Pro?
I had WHS2011 installed on a rig and everything was fine. I decided to turn it into a HTPC and installed Windows 7. It then started freezing on idle. As long as I used it it was fine but when I left it alone it froze up. I tried a few things but finally just wiped the HD and started anew. Immediately the same problem.I turned off every sleep/hibernation setting to no avail. There are no warning flags in Device Manager. My video card has the latest drivers.The strange thing is it runs fine in Safe Mode and for about six hours or so under Diagnostic Boot but then freezes.I am at a loss The system is a i3 CPU with 8 gigs of RAM, GeForce 460GT GPU and a couple of SATA hard drives (350gig and 1.5tb)
View 9 Replies View Relatedhen the system is not heavily loaded it seems to freeze after 10 minutes to an hour, primarily observed with the Up Time clock in Task Manager stopping. Other symptoms include no response to keyboard or mouse clicks and having the cursor lock to a particular shape such as the window size adjustment shape. The only way I have found to get the system going again is to shutdown and reboot. Usually a hardware reset or forcing shutdown is required to get applications such as Task Manager to stop. When the system is heavily loaded i.e. running Prime95, these symptoms do not seem to occur.I have been unable to determine conclusively whether the problem is hardware or software. The system(s) are new with the following configuration[CODE]I have performed multiple clean installations of Windows 7 Pro from two different Microsoft DVDs (purchased from Newegg), used two different sets of hardware (including CPUs, memory, video cards, Power supplies, disks, etc.) changed from Gigabyte GA-X58-USB3 motherboards to GA-X58A-UD5 motherboards, run memory tests for ten hours or more, run in Safe mode, run with absolutely no additional software other that the virgin operating system. Tested multiple BIOS settings, including optimized defaults, with changes only to allow RAID disks.
View 9 Replies View RelatedThis suddenly began occurring about a week ago. The system runs fine, however if it is left for a fairly short period of time (15-20 mins) The program am I using will freeze and the cursor will change to loading. The task bar will then freeze if I try and click 'start', and I have to hold down my Power button to turn the PC off. I have tried system restore, Defragmentation, and virus checks. Running out of ideas! I'm using x64 Windows 7, and my specs are as follows.
View 3 Replies View RelatedMy problem: My system stops responding if I leave it to idle for 20min - 1hour. I am forced to power off by holding the switch and restarting it[CODE]
View 14 Replies View RelatedLately I have problems with my pc, sometimes the windows blocks/freeze and I must restart from the button; this happens like 1 time in 3 hours or 1 time in 7 days, it's random. The image freeze even if the pc is in idle. I have found another problem, the mouse cursor freeze for 2 sec (the image doesn't freeze, only the cursor), and after it's coming back to normal. I tried with several mouse's. I tried with another HDD and I have the same problem..
PC config:
cpu: i5 750 2.66
gpu: msi gtx 460 hawk
mobo: asrock p55 pro/usb3.0
ram: Corsair 4GB DDR3 1333MHz CL9 XMS3 Dual Channel Kit
hdd: Samsung 250 GB SATA-II 7200RPM 16MB SpinPoint F1
psu: AntecBasiq Power 550W
I did reinstall the windows, update drivers and bios update, cleared cmos, tested the RAM with memtest86 (no errors).
have a Gateway desktop pc which freezes when I leave it idle, usually within 5-10 minutes it'll freeze.My hijackthis report can be seen at . can any let me know what's wrong?Mod Edit: Removed link to HJT log, not used/allowed in this forum - Hamluis.I've checked the cpu temp as well as ran spyware/antivirus to no avail.
View 2 Replies View RelatedI am using FF 5 currently and every time I leave the browser for a few minutes and then 'wake' it from being idle, I get a delay until it starts to respond to anything.It seems that this problem started when I first upgraded from FF 3 to 4 and has been going on since then. have tried to disable some add-ons to test if this would make a difference, have created a new profile, cleared cache, history etc. but nothing seems to keep the browser from going into this 'hibernation mode'.I really do like FF per se, but this issue is driving me nuts
View 2 Replies View RelatedAbout 2 months ago I started getting random freezes and would have to do a hard restart on my computer to restart. To see if it was a virus or any kind of malware, I did a clean reformat of my hard drive and was still having issues. Eventually it started taking forever to boot up and load files and I got a SMART status bad message. So I wound up replacing my hard drive with a brand new one and did a clean install of Windows 7. That seemed to fix the slow boot and file load times but now I'm still getting freezes. However they are not random. They seem to happen when I don't touch the computer for awhile, whether I have a program such as something downloading in the background or not. They also seem to happen when I close the computer and put it to sleep and leave it like that for awhile. I try to wake it up and I only get a black screen, however my computer is on as I can hear the components.
The strange thing is as long as I am actively using the computer it doesn't seem to do this. I was on it for about 6 hours yesterday night and nothing happened and the computer was working fine. I did various hard disk scans even though I know it can't be the hard drive seeing as I just replaced it. It also isn't my graphics card as I uninstalled the driver and let my computer run for awhile with the standard VGA adapter and it still froze after me not touching it for awhile. I also did a windows memory diagnostic scan and nothing came up. I'm thinking there are 2 seperate problems with my computer, one that I fixed by replacing the hard drive (the slow boot time and file loading times, it took me 20 minutes to open up windows explorer, it doesn't anymore.) and another that I am unsure of. Should I do more memtest passes? I heard that one is not enough and that you should do up to 7 to make sure your RAM isn't faulty.
Here are my computer specs:
Model: Samsung R780
OS: Windows 7 Home Premium (64-bit)
Processor: Intel Core i5 2.27 GHZ
RAM: 4GB DDR3
Graphics Card: Nvidia GeForce GT 330M (1GB Video Memory)
Hard Drive: 500 GB Hybrid SATA/Solid State (4GB of solid state memory), this is the new hard drive that I purchased.
I tried downloading updates for a game and it immediately froze. So maybe the freezing is still happening on a random basis...
My computer locks up randomly and the screen turns black and unresponsive, at least once per day, forcing me to do a hard reset.There is no BSOD or Minidump created, although sometimes (maybe 75% of the time) there is a dump file created in the LiveKernelReports folder. The dump files in LiveKernelReports always point to atikmpag.sys. I tried uninstalling all video card drivers and using driver sweeper, and letting Windows use default graphics. I continued to get the same freezes, except no dump files were created at all in LiveKernelReports. I then reinstalled the ATI drivers, and the symptoms persist, now with dump files again pointing to the same atikmpag.sys.this only happens when the system is idle for a while. I never get freezes when actively using the system, but if I return to it after an hour or more, it's just a black screen and I must do a hard reset.I am running Win 7 professional 64-bit full version, 8 gb ram, 1gb ddr5 msi video card.Another strange symptom: After the hard reset, the computer has deleted all of my IE cookies. It also has forgotten the IE window size after these hard resets... very bizarre. In fact, if I make any changes to the desktop -- for example, by moving the icons or re-sorting them by name -- Windows doesn't remember this either. On reboot, it reverts to whatever I had on the desktop before making the changes. This does not happen on a normal restart/reboot. If I do not wait for it to crash, and instead I reboot normally, all of my settings/cookies/window sizes are preserved like you'd expect.
I've tried the following:
- ran memtest86, no errors after 9 passes
- ran seatools hard drive diagnostics, no errors found
- ran Hot CPU Tester 4, no errors found
- reinstalled/reseated graphics gard and memory sticks
- running with a single memory stick (same crashes occur with either memory stick)
- the windows memory and hard drive diagnostic tools, no errors found
- When running Driver Verifier, I get the same freezes, and still no minidump or bsod.
- Disabling all power saving options both in Windows and in the BIOS, like sleep mode, hibernate, etc.
- Updating all drivers that seemed out of date and upgrading bios to latest firmware.
Prime95 and furmark run without issue, and do not crash the system (presumably, because the system isn't idle when they are running). Idle temps (~30 degrees C) and temps under heavy load (about 60 degrees C) are well within the normal range.If I run in safe mode, it does not seem to occur, but I'm not positive because I've never stayed in safe mode for more than a day.
I found that my Windows 7 64 bit machine was not sleeping reliably. I changed the sleep time by entering "sleep" into the search box which brought me to "Power Options/Edit Plan Settings" and I entered 5 minutes for "turn off display" and 15 minutes for "put the computer to sleep".
View 2 Replies View RelatedI have an Asus Eee Laptop PC with Windows 7 Home Premium 64bit which very often crashes and reboots while it is sleeping (lid closed), but never while running. When I open the lid again the system is back in windows and is showing the sort of "auto search" for solutions but it never finds any.
View 3 Replies View RelatedMY sleeping dogs not working IN WINDOWSTHE GAME IS OPENING AND NOT WORKING IN MY PC
View 1 Replies View RelatedI have an Asus Striker Extreme motherboard. Since I have a PS3 but access to only one ethernet port, I've bridged my two motherboard ethernet adapters and plugged my PS3 into my computer so they can share the connection.I'd like to know if it's at all possible to configure Windows somehow to prevent it from going to sleep while there's any activity over the network bridge. Obviously I prefer to keep Windows' power saver scheme intact or I'd just disable sleeping entirely. However I don't want to have to reach over to the computer and bumping the mouse every ten minutes as I'm playing to prevent it from sleeping and cutting off my PS3's network connection.
View 17 Replies View RelatedWhen my pc sleeps (after i have not be using it for a while), i wake it up and put in my password and press enter, but it doesnt return to my normal screen. Instead i just get an all black screen that wont go away, unless i shut down the pc by holding the power button. Any suggestions?
View 0 Replies View RelatedLaptop Sleeping Instead of Shutting Down?
View 1 Replies View RelatedI have been having a reoccurring problem for the last week that when I turn my laptop on after being slept, windows boots from scratch and all the programs I had open are gone. A message then pops up with the following info:
Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7600.2.0.0.768.3
Locale ID:2057
[code]....
I have a small network consisting my work system and a HTPC. The HTPC spends all day sleeping, or at least that's the plan. It has a couple of maps to shares on my work machine, but not vice versa. Whenever I open an Explorer window on my main system it wakes up the HTPC, annoyingly. There doesn't appear to be a don't wake on LAN option (it's an Intel DH67GD motherboard). I could understand it if I had mapped some drive letters on my main system to shares on the HTPC, but that's not the case.
View 2 Replies View RelatedI'm hyped for this can't wait need to buy this but still hasn't came out yet but coming out very soon Really good trailer
View 2 Replies View RelatedRecently i have been having trouble getting my Dell Studio 1747 laptop to hibernate or sleep. When i go to start and hit either sleep or hibernate, the screen shuts off but the computer never fully goes off. The fans continue to run and the usb power lights are still on. It will stay like this for hours. I have let it go all night before and the only way to shut it off is to hold the power button and do a force restart. I have had this problem before. After a different discussion post we determined it was a power settings problem and after I set hard disks no not shut off the problem was solved. I had to reinstall my OS and when i put the same power settings back, the problem continued to happen. But i still think it may be a power setting. I have all of the current drivers installed and my computer is free of any viruses. Im running Windows 7 Pro x64 but it was also a problem with home edition.
View 3 Replies View Relatedas above. my sleep timer is set to 10minutes. however, i don't expect it to sleep when it is doing important stuff - e.g. adobe/windows updates.. converting files in Lightroom etc. how do i configure that?
View 1 Replies View RelatedI have a HP XW8400, Win 7 x64 Ultimate, 8G Fully Buffered memory.Per instructions of my "computer guy", I leave the computer on almost always. I was awaken at 4AM by the "alarm" on the computer, and a black screen with error codes 922, 923 and 927. See attached picture. Having experienced this error before (maybe a year ago) I shut the computer down, carefully cleaned the contacts on the video card, card reader and memory. I also removed the Hauppauge WinTV 1600 card, as I hadn't used that accessory in years.Since reboot, the computer would run fine for about an hour or so, then it would freeze up, accepting no input from keyboard. A few seconds later mouse input would not be accepted, and then the BSOD with error code 0x000000F4. This procedure went on three or four times, but I was able to do some work in the meantime. My computer tech called back and said I should try a system restore. I did that, but now I am unable to boot at all. I tried several times, one time getting a BSOD - type screen, but the characters were unintelligible. It was acting as if someone had shrunk a screen full of type horizontally, "squishing" the letters.As my computer tech is unavailable, I need to attempt to fix the problem myself, as I use this computer about 12 hours or more daily.
View 7 Replies View RelatedWhen my desktop computer wakes from sleeping it takes approx. 20-30 seconds to connect to the internet. From what I remember, several things happened just a little bit prior to my noticing that this was occuring- 1. I installed Skype (I remember installing Skype on one of my computers before and it kept the computer from sleeping, I don't remember if I was able to fix it or had to do a system restore, so Skype has been a problem in the past although not this specific problem), 2. I ran Combofix for a virus infection, and 3. I got a new modem from the phone company after the old one quit working.I'm really not sure what the problem is, ie if it is one of the things above or something else completely, as I uninstalled Skype and the problem persisted (was not able to do a system restore to before Skype being installed due to Combofix deleting my system restore points) and my laptop is connected to the same router that is hooked up to the new modem that my desktop is and my laptop is connected to the internet immediately after waking from sleeping so I'm not sure how it could be a problem with the new modem if my laptop connects but the desktop doesn't. I've tried doing various fixes and tweaks from googling around but haven't been successful in finding anything
View 2 Replies View RelatedI would like to know if there is a way to set a password to stop others from sleeping or shutting down my laptop either through windows or a programs.
View 6 Replies View RelatedNew to Windows 7 and have a question. It seems my test machines keep going into some kind of sleep/hibernate state that prevents me from VNC'ing to them. All I want is for the monitors to go to sleep after 15 minutes, but the machines to stay on. We do a lot of work during off hours, but the few test machines all seem to go night-night on me when I try to access them during those times.
Does anyone know which group policy settings I should use in order to help with my late night VNC'ing?
Ever since I built this PC (about 1 month ago now) I haven't been able to put him to sleep. I can set the "time until sleep" for 1 minute and sit next to him watching and waiting, and that works, but anything more than 5 minutes and he just won't sleep.
I did some digging and figured out how to use the Event Viewer and Command Prompt "Lastwake" command to find what's waking him up. It's my Intel 82579V Gigabit Network Connection. I imagine that means that he's getting signals from the internet while trying to sleep. I have Steam and MSN isntalled, but even when I log out of those and close them, the computer still won't sleep.
Now that I've figured out the source of the wake though I'm not sure what's the next step. I'd rather not have to unplug my internet every single time I want the computer to sleep. Aside for simple inconvenience I believe that would put some serious strain on the port over the long term (my last PC's LAN port was one of the first things to fail). So is there a setting that I can change so that the computer ignores the Network Connection's wake signals?
First and foremost, details of my lappy:Asus A43SWIndows 7 64 bitAMD Radeon HD 673Intel core i7 8gb RAMIt is a new lap, just bought 2 mths ago.Noticed the first problem with it is 1) THe computer becomes slow and cranky and even crashes after resuming from the hibernation or sleeping (fall short of a BSOD, eg can't move mouse, etc...and have to hard restart the laptop). Managed to reduce the frequency of i from always to infrequent by setting the hard disk turn off, sleep and hibernate option in the power option to never. Lots of forum explained such similar problem, but despite updating BIOS, display driver, asus ATK utility driver, etc...still persists2) Now coming to the 2nd question which I am wondering is it related to the problems after resuming from sleep/hibernate.
Got repeated BSOD today.....after I update the power4gear hybrid utility (by asus to a newer version) version 1143 to 1150. Managed to generate and use debuggin tool to see the dump file...which shows ntoskrnl.exe as possible cause. MInd you that this also the same culprit that appears in the dump file in my problem number 1(which has once BSOD during resuming from hibernate/sleep)So is number 1 and number 2 related?What is wrong actually with number 1 problem?What is ntoskrnl.exe, and how to fix it?
Just recently I have started having the issue of too much RAM being used on both my desktop and laptop.I am by no means a novice when it comes to computers.The desktop is a custom build and the laptop is a $3600 workstation.Both systems have never given me this problem until I installed Microsoft Office 2013.I can data this problem as soon as I started using this version of office.However, new updates on Windows 7 cannot be ruled out as a possible issue so I am posting on the forums to see if anyone else is having similar issues.
Here are screenshots of task manager. As you can see, there is no program using more than 80MB of RAM. I cannot figure out what is occupying all the space. Could it be clipboard? This usually happens after I am done working on assignments (which require quite a bit of copying and pasting graphs in uncompressed TIFF format created in MATLAB).
Side note: After restarting my desktop,the system usually uses around 1.8GB RAM and laptop uses around the same. This issue is on both laptop and desktop.
Relevant desktop specs: Intel i7 2700k, OCed at 4.5GHz (liquid cooled), Intel 330 180GB SSD, Nvidia GTX570, Western Digital Black 1TB for storage, Corsair Vengeance 8GB RAM working at 1600 MHz.
Relevant laptop specs: Intel i7 920XM, Intel 330 180GB SSD, Nvidia Quadro 880M, Western Digital Black 320GB for storage, Corsair Vengeance 8GB RAM, working at 1333 MHz.
I have Gb of ram and recently upgraded from 4gb. When i had 4gb it used 30% of ram when idle. I switched to 8gb and it is using 50% when idle. I used several virus detection softwares to see if that was it. It wasn't. NowIi am also finding programs such as firefox or java using ridiculkous amounts of ram. For example; I was using firefox and was just using google. Next thing I see is a message from windows saying to close firefox casue it using too much ram. I look at the processes to see how much ram and it will be using about 3.5Gb ram...
View 3 Replies View Related