Computer Becomes Slow And Cranky And Even Crashes After Resuming From The Hibernation Or Sleeping?
Dec 30, 2011
First and foremost, details of my lappy:Asus A43SWIndows 7 64 bitAMD Radeon HD 673Intel core i7 8gb RAMIt is a new lap, just bought 2 mths ago.Noticed the first problem with it is 1) THe computer becomes slow and cranky and even crashes after resuming from the hibernation or sleeping (fall short of a BSOD, eg can't move mouse, etc...and have to hard restart the laptop). Managed to reduce the frequency of i from always to infrequent by setting the hard disk turn off, sleep and hibernate option in the power option to never. Lots of forum explained such similar problem, but despite updating BIOS, display driver, asus ATK utility driver, etc...still persists2) Now coming to the 2nd question which I am wondering is it related to the problems after resuming from sleep/hibernate.
Got repeated BSOD today.....after I update the power4gear hybrid utility (by asus to a newer version) version 1143 to 1150. Managed to generate and use debuggin tool to see the dump file...which shows ntoskrnl.exe as possible cause. MInd you that this also the same culprit that appears in the dump file in my problem number 1(which has once BSOD during resuming from hibernate/sleep)So is number 1 and number 2 related?What is wrong actually with number 1 problem?What is ntoskrnl.exe, and how to fix it?
View 3 Replies
ADVERTISEMENT
Jul 22, 2009
When coming out of hibernation in Windows 7, I get the following error message:
"Your system's firmware did not preserve the system memory map across the hibernation transition. If you proceed with resume, your system could behave in an unexpected manner after resume completes. It is recommended that you save all your data and reboot after system resume finishes. Kindly check for a firmware update with your system vender as it may fix this problem."
Windows 7 continues to resume and I have not noticed any problems once it resumes.
I am dual booting Vista 64 bit SP2 and Windows 7 64bit on an HP DV3510NR. I recently flashed the latest bios version for my system dated May 2009.
I have no problem resuming from hibernation when booted into Vista. Has anyone else gotten this error message. Any thoughts on how to go about solving this?
View 9 Replies
View Related
Dec 5, 2012
New to Windows 7 and have a question. It seems my test machines keep going into some kind of sleep/hibernate state that prevents me from VNC'ing to them. All I want is for the monitors to go to sleep after 15 minutes, but the machines to stay on. We do a lot of work during off hours, but the few test machines all seem to go night-night on me when I try to access them during those times.
Does anyone know which group policy settings I should use in order to help with my late night VNC'ing?
View 1 Replies
View Related
Jan 31, 2012
I have an Asus Eee Laptop PC with Windows 7 Home Premium 64bit which very often crashes and reboots while it is sleeping (lid closed), but never while running. When I open the lid again the system is back in windows and is showing the sort of "auto search" for solutions but it never finds any.
View 3 Replies
View Related
Feb 15, 2011
I just purchased a new laptop. I already have problems - first, the laptop seems to have issues in hibernation mode. Second, and worse, it's always freezing and not responding. I have installed very few programs right now - WoW for my son, firefox. My university also installed microsoft office 2010, another program that allows me to log onto their network, pharos, and an antivirus program called landesk - which I think may be the issue. I tried locating the antivirus program to uninstall, but couldn't. Where should I start?
Also, I'm using Windows 7 and its a 64 bit system.
View 5 Replies
View Related
Jun 6, 2011
Recently i have been having trouble getting my Dell Studio 1747 laptop to hibernate or sleep. When i go to start and hit either sleep or hibernate, the screen shuts off but the computer never fully goes off. The fans continue to run and the usb power lights are still on. It will stay like this for hours. I have let it go all night before and the only way to shut it off is to hold the power button and do a force restart. I have had this problem before. After a different discussion post we determined it was a power settings problem and after I set hard disks no not shut off the problem was solved. I had to reinstall my OS and when i put the same power settings back, the problem continued to happen. But i still think it may be a power setting. I have all of the current drivers installed and my computer is free of any viruses. Im running Windows 7 Pro x64 but it was also a problem with home edition.
View 3 Replies
View Related
Oct 27, 2012
as above. my sleep timer is set to 10minutes. however, i don't expect it to sleep when it is doing important stuff - e.g. adobe/windows updates.. converting files in Lightroom etc. how do i configure that?
View 1 Replies
View Related
Mar 11, 2012
I have a HP XW8400, Win 7 x64 Ultimate, 8G Fully Buffered memory.Per instructions of my "computer guy", I leave the computer on almost always. I was awaken at 4AM by the "alarm" on the computer, and a black screen with error codes 922, 923 and 927. See attached picture. Having experienced this error before (maybe a year ago) I shut the computer down, carefully cleaned the contacts on the video card, card reader and memory. I also removed the Hauppauge WinTV 1600 card, as I hadn't used that accessory in years.Since reboot, the computer would run fine for about an hour or so, then it would freeze up, accepting no input from keyboard. A few seconds later mouse input would not be accepted, and then the BSOD with error code 0x000000F4. This procedure went on three or four times, but I was able to do some work in the meantime. My computer tech called back and said I should try a system restore. I did that, but now I am unable to boot at all. I tried several times, one time getting a BSOD - type screen, but the characters were unintelligible. It was acting as if someone had shrunk a screen full of type horizontally, "squishing" the letters.As my computer tech is unavailable, I need to attempt to fix the problem myself, as I use this computer about 12 hours or more daily.
View 7 Replies
View Related
Jan 15, 2013
When my desktop computer wakes from sleeping it takes approx. 20-30 seconds to connect to the internet. From what I remember, several things happened just a little bit prior to my noticing that this was occuring- 1. I installed Skype (I remember installing Skype on one of my computers before and it kept the computer from sleeping, I don't remember if I was able to fix it or had to do a system restore, so Skype has been a problem in the past although not this specific problem), 2. I ran Combofix for a virus infection, and 3. I got a new modem from the phone company after the old one quit working.I'm really not sure what the problem is, ie if it is one of the things above or something else completely, as I uninstalled Skype and the problem persisted (was not able to do a system restore to before Skype being installed due to Combofix deleting my system restore points) and my laptop is connected to the same router that is hooked up to the new modem that my desktop is and my laptop is connected to the internet immediately after waking from sleeping so I'm not sure how it could be a problem with the new modem if my laptop connects but the desktop doesn't. I've tried doing various fixes and tweaks from googling around but haven't been successful in finding anything
View 2 Replies
View Related
Jan 22, 2013
I would like to know if there is a way to set a password to stop others from sleeping or shutting down my laptop either through windows or a programs.
View 6 Replies
View Related
Sep 23, 2012
Windows 7 64-bit
ASUS P7P55D-E LX
Core i5-750
Just the other day, I bought a Samsung 830 SSD and tried to install it yesterday. There were several problems, including the SSD not showing up in disk management and Windows Explorer, but showing up in device manager, and showing up in the BIOS. The biggest problem, however, was learning that my motherboard could not do SATA 6 without halving my PCI-E x16 lane. Anyway, I decided to hold off on the SSD until my next build and I'm sending it back.
The issue now is that I cannot put my computer to sleep. When I do, it resumes within a second or so. I tried unplugging every device from it, including my Ethernet cable and all USB devices, and it still persists. I also changed power management to disallow my network card from waking my computer, and changed the suspend mode of my USB controller to disallow them to wake the computer as well.
While installing the SSD, I recall changing the SATA 6 Marvell controller from IDE to AHCI (two SATA 6 ports are controlled by Marvell (into which I plugged my SSD) and the others by JMicron). As of writing, the Marvell controller is back to IDE and has nothing plugged into it. I also installed a few SATA controller drivers while attempting to get SATA 6 speeds and trying to figure out why my SSD was not showing up in disk management (I could not even format it via a right-click and it had no drive letter).
My suspend mode is set to "Auto" in BIOS, same as it's always been. Perhaps this has nothing to do with my failed installation of the SSD. But it only began after I tried to install it.
View 2 Replies
View Related
Dec 8, 2012
When I put my computer in hibernation, sometimes when I wake it, it hangs at the user select screen, or it just shows a black screen. Sometimes I can reset the computer after it has hanged, and try again resuming from hibernation, and many times it will work after a couple of tries. Other times after resetting I won't get the prompt to try again with resuming (the other option is to delete hibernation data and reboot the system) but I will get the usual screen that says that Windows was not shut down correctly (with all the options for safe mode, etc). If I cannot resume and I get the screen with safe mode and all the other crap, I finally log in I get a notice that there was a critical error, in the details I see BlueScreen and other data, but I actually never get a blue screen. In the dump folder, there are no dmp files related to the hibernation hanging.
Anyway, when it happens, I see several Event 18 WHEA-Logger in the event viewer, about 6 of them every time.What's weird though, is that I literally have NO problems with this computer other than this. The only times it hangs is when I resume it from hibernation. I can play games or run stress tests with or without overclock and the system is 100% stable. But there is some problem that prevents it from resuming from hibernation correctly, so every time I use it is basically a gamble because it has like 50% chance of working.I tried EVERY SINGLE solution I found with google related to hibernation problems, and it's still there. I even formatted and reinstalled Windows from scratch, and it's still there. I'm positive I updated every single driver for every hardware I have and nope, no solution.I know the WHEA error is related to the hardware but like I said, everything works PERFECTLY once the system starts up properly, or when it resumes from hibernation properly. [code]
View 6 Replies
View Related
May 28, 2011
My computer wakes from hibernation.I�m using windows 7 x64. My BIOS doesn�t support any configuration settings about wake, and the LAN device driver states that it doesn�t support wake on LAN.It�s a Dell Lattitude laptop, about 2 years old.No events are relevant.This started about 6 months ago when I went out and updated all my drivers, so some driver is apparently having fun. I had already run for long enough when it started that I didn�t want to roll back, although I have tried earlier versions of the LAN, WAN and WLAN drivers. None of them have an option for disabling wake on LAN that can be checked.
C:>powercfg -lastwake
Wake History Count - 1
Wake History [0]
Wake Source Count � 0
C:>powercfg -devicequery wake_armed
gives no output.
View 4 Replies
View Related
Dec 4, 2012
My new HP desktop is in hibernation mode and the monitor displays a message that says it can't come out of hibernation. What can I do?
View 3 Replies
View Related
Dec 21, 2012
I just bought a NIB (New In Box) Windows 7 computer and I have run into a problem I have not seen and don't know what to do with. I keep my computer password protected due to financial and other sensitive information I have on it. Whenever I am away for an extended period I lock my computer using the Windows Key - L combination.If I am only away for short periods of time everything is fine but if I am away from my computer for an extended period and I try to wake my computer up it won't come out of hibernation and I have to use the power switch to shut it down and restart it and of course I get the "Windows did not shut down normally" screen.I like to leave my computer on for convenience and to get Windows updates but I now hesitate to do this if I am going to have to deal with it not coming out of hibernation every time I am away for a long period. I suppose I could always leave it on but this uses a lot of power as well as wear and tear on moving parts.
View 2 Replies
View Related
Apr 2, 2012
i have an asus k 50 in laptop with pentium t4200 as cpu 4 gb ram 250 gb hdd and windows 7 home premium 64 bit and panda antivirus and i have a big problem, every time i use a programme it crashes, i can't use chrome, ie, firefox windows media center, nothing, i have to restart the pc and after 10 minutes of use windows crashes, i did lot of analizations with cc cleaner, i have corrected some errors with it, i have no virus.It is very very slow also when i switch it on.I love my pc how i can manage to save it, i wish i could have a fast pc that i can use easily.
View 5 Replies
View Related
Nov 28, 2011
Here's my problem:I have a netbook (HP mini 311) that came with Windows XP, and then I've installed windows 7 on it.When the computer goes to hibernation either because the battery is getting too low or that I close the lid (as I choosed these in the power options) , the computer won't successfully boot up to the "Resuming windows" screen. And what I should do is to turn it on and off 3 times, and so it starts normally (to resume windMore notes: at first boot screen (where the hp logo is) , at the bottom right of it, there's usually a "Press esc for startup options" text, that doesn't appear by the 3 first boot ups tries.
View 2 Replies
View Related
Mar 26, 2011
Is it possible to wake my computer from hibernation to stream content to, lets say, an Xbox 360? Then after its done streaming put the computer back to sleep?
View 3 Replies
View Related
Mar 18, 2012
For the past week I've had crashes after about an hour of use. I was getting BSODs that flashed quickly then the computer tried to reboot but would not get past the motherboard screen.Power cycling brings windows back. After enabling a page file I was able to get a BSOD and minidump which wasn�t happening previously.I've tried memtest86 (only 1 pass), chkdsk and windows virus scans. Nothing shows up. I dusted out the internals and monitored the CPU temp and that was normal. The video driver (AMD onboard) was the only driver that needed updating and I fixed that with no change.
Here's my info:
x64 windows 7 professional, homebuilt, about 1 year old.
More details:The first time the crash happen I was running Google Earth for the first time in a long time. Initially web pages stop loading. Then I can�t switch programs or start task manager. Then the spinning rings cursor shows up. About a minute later the computer flashes the BSOD then reboots. Though now it seems to persistently show the BSOD.
View 4 Replies
View Related
Jun 9, 2012
I have a one year old Lenovo Thinkpad Edge E420s. I'm using Windows 7 Ultimate x64 with an Intel i5-2410M @2.30GHz. I bought the Ultimate OS retail as an upgrade to the Windows 7 Home edition. Recently, when I put my computer in hibernate or standby, when I turn the computer back on, it causes the BSOD and the computer restarts.I have attached the dump files.Here is the error message I get when the computer finally starts:Windows has recovered from an unexpected shutdown
Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7601.2.1.0.256.1
Locale ID:1033
[code]....
View 4 Replies
View Related
Apr 18, 2011
On a brand new, freshly installed Windows 7 Ultimate 64. I get the following error when resuming from Hibernate: "Your computer can't come out of hibernation. Status 0xc000009a". No other info, no reference to any file such as hyberfil.sys. I have tried to "powercfg -h on/off", reboot defrag and reactivate hibernation, however the problem is still there.....what can I try?
View 9 Replies
View Related
Dec 16, 2011
Every time I manually start hibernation it will begin the process; the monitor will go blank, the harddrive starts making the image and after about 30 seconds the the monitor comes on and the computer is in normal operation. I have tried enabling it with the command line (powercfg -h on) as the administrator with no success. This just started yesterday. I have not installed any new applications or any new updates.
View 1 Replies
View Related
May 24, 2012
Windows 7 x64, Dell Optiplex 990, 3 Dell monitors, everything else stock.
Two monitors are running off of the built in VGA and Display Port. I originally installed a Geforce 6200 to get the third monitor up. Works fine in Chrome and nothing else is slow. (office pc, so no gaming tests I suppose)
Firefox was REALLY slow and had blacked out parts unless you hovered over them. So I got rid of the card completely and installed/plugged in an EVGA UV+ 19. Now Firefox is great on the monitors that are NOT on the UV+, but slow and laggy on the one that is.
Drivers and Windows updates are current.
View 5 Replies
View Related
Mar 25, 2012
Computer runs very slow. Computer freezes randomly. Does not want to boot past windows startup except for in safe mode(SOMETIMES). IF IT BOOTS takes and an incredibly long time to get to the desktop (20-45min). Does not want to run programs. Runs EXTREMELY slowly (makes a windows 95 pc look like a speed demon.) Random restarts, restart loops, and shutdowns. Sometimes after turning on it will immediately shut off then turn back on. Keeps recommending windows repair on startup. Wants to run chkdsk, then freezes on it.Malware detection programs. Hardware diagnostic programs. registry tools. disk defrags. Driver updates. Windows updates. BIOS update. System restore. Windows repair tool. Repair installation (twice). WINDOWS 7 CLEAN INSTALLATION (twice).Exactly the same as the first day it started happening. So not only did I lose all programs and files, but my pc still runs like crap. Also, this is a higher end pc under a year old. [code]
View 8 Replies
View Related
May 29, 2012
I found that my Windows 7 64 bit machine was not sleeping reliably. I changed the sleep time by entering "sleep" into the search box which brought me to "Power Options/Edit Plan Settings" and I entered 5 minutes for "turn off display" and 15 minutes for "put the computer to sleep".
View 2 Replies
View Related
Aug 23, 2012
I did as you said Centaur. i've attached the zip folder and i updated my system specs. sorry for the bad posting the other day.
View 7 Replies
View Related
Nov 4, 2009
When my pc sleeps (after i have not be using it for a while), i wake it up and put in my password and press enter, but it doesnt return to my normal screen. Instead i just get an all black screen that wont go away, unless i shut down the pc by holding the power button. Any suggestions?
View 0 Replies
View Related
Nov 4, 2011
Laptop Sleeping Instead of Shutting Down?
View 1 Replies
View Related
Jan 24, 2013
My computer system crashes when I play most video games (only company of heroes and civilization 5 wont crash). I have already ran all the stress tests including memtest 86+, prime95 and furmark without any errors/crashes. I suspected that it was a driver issue so I decided to do a clean reinstall of windows 7 and then install all the drivers. It had absolutely no effect I updated my motherboard and video card BIOS but that didnt help either. I tried disabling ULPS and 2D clocks for my video card but nothing happened. The only critical event that is logged in event viewer is "kernel ID 41" (Its just a notification that my computer was shut off unexpectedly). When the computer crashes, a black screen will appear and the last bit of audio that was playing will get distorted and it will keep on playing(It will make a loud BRRRRR noise).I have to then manually restart the computer and boot back into windows.
system specs:
phenom ii x6 1050t @3.9ghz 1.46v (max temp 52C)
8 GB kingston hyper x 1600mhz memory
radeon 7850 2 GB (max temp 58C)
OCZ modxstream 700 watt PSU
1 TB western digital HDD
corsair c70 with 6 120mm cooling fans
View 14 Replies
View Related
Apr 26, 2011
i have the same problem with a benq joybook a53, every time i close the lid, when i open it , i have a blue screen, and it doesn`t matter if i put it on sleep or hibernate, only with "do nothing" doesn`t appear the blue screen, but i really do nead to close the lid and put it to sleep, or hibernate. i`ve attached the files from c:\windowsminidump
View 3 Replies
View Related
Jan 4, 2012
sometimes when coming out of sleep mode I'll be greeted with the boot screen. Upon logging into Windows, I get the "Windows has recovered from an unexpected shutdown" error:
Code: Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7600.2.0.0.768.3
[Code].....
View 3 Replies
View Related
