Intel Gigabit Network Connection Keeping PC From Sleeping
Jun 14, 2012
Ever since I built this PC (about 1 month ago now) I haven't been able to put him to sleep. I can set the "time until sleep" for 1 minute and sit next to him watching and waiting, and that works, but anything more than 5 minutes and he just won't sleep.
I did some digging and figured out how to use the Event Viewer and Command Prompt "Lastwake" command to find what's waking him up. It's my Intel 82579V Gigabit Network Connection. I imagine that means that he's getting signals from the internet while trying to sleep. I have Steam and MSN isntalled, but even when I log out of those and close them, the computer still won't sleep.
Now that I've figured out the source of the wake though I'm not sure what's the next step. I'd rather not have to unplug my internet every single time I want the computer to sleep. Aside for simple inconvenience I believe that would put some serious strain on the port over the long term (my last PC's LAN port was one of the first things to fail). So is there a setting that I can change so that the computer ignores the Network Connection's wake signals?
View 6 Replies
ADVERTISEMENT
Oct 18, 2012
Today when I started up my computer it blue screened about three times at the log in screen. After the third or so time I booted my computer with the last known good configuration. At first it seemed to work; everything seemed to boot as ormal.However, I noticed that I could not connect to the internet. I went into the Device Manger and noticed a problem with my Intel(R) 82579V Gigabit Network Connection. Under device status it states "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)" I have updated and reinstalled the drivers twice now to no avail. I do not know what the problem is.
View 1 Replies
View Related
May 12, 2009
I'm out of ideas. Tried several different drivers, and settings. Using a fresh install of Windows 7 RC. The drivers all seem to "work", by which I mean Windows 7 has no problem with them, but no driver I've tried will let the card actually talk with anything. It keeps trying to find a DHCP address and always comes up with a 169 address. Even when I specify a static IP it still won't see anything on the network.
DHCP is working for my on board NIC, and this card works in my XP installation on this same PC.
The driver that seems to "work" the best so far is this: Download HP Intel PRO/1000 Gigabit Driver 13.5.00 Rev.C for Vista64 Driver for Windows Vista64 - Softpedia
With that driver I actually get all of the nifty features in the driver properties page, and I've run all of it's diagnostic tests which all come up green.
Also worth nothing: I had this same problem with Windows 7 Beta.
View 9 Replies
View Related
Sep 30, 2012
a friend of mine now has a gigabit connection but can only get 400Mb download when tested via speedtest.net. while the engineer was installing everything he noted speeds of 700Mb on the laptop used for the setup.
would the lower speeds be due to the realtek network card he has?
View 3 Replies
View Related
Nov 3, 2009
I am having networking issues with Windows 7 Pro. I did a clean install on Saturday from Windows XP and started having issues staying/getting connected to the internet with my motherboard's (ASUS A8NVM-CSM) on board Nvidia nForce networking controller. After seeing that others were having the same problem, I bought a new card, Dynex Gigabit PCI Card which installed perfectly and disabled the other one. Now I'm running into issues of my connection dropping sometimes every 5, 10, 20 minutes and the only way to get it back instantly is to do ipconfig /renew.
When I do the troubleshooter, it tells me there's something wrong with the connectivity of my modem or router, which is impossible. I say this because I live with roommates who are all using different operating systems (Vista, XP, Mac OS X Leopard) and they haven't had connection problems either. There are two routers in the house, a Netgear and a Cisco, and I haven't a problems with either of those when I was on XP, and my roommates aren't having issues with it either.
Any ideas or settings I might be able to change on this card? I've tried drivers and changing cables out, making sure Windows doesn't turn off the network card to save power...etc. Let me know if you need more information.
View 2 Replies
View Related
Oct 26, 2011
I have a Dell XPS 15Z with gigabit ethernet port, have dgs 1005d gigabit switch and WDTV live hub also with gigabit "capability"... The network cables should be fine...
The issue is that the file transfer (these are usually HD movies) from my laptop to WDTV are rather slow having in mind it's a gigabit network connection... The speed tops 15 MB/s. Same thing if I connect WDTV directly with my laptop.
The switch indicates (green light) it has set-up a gigabit connection both with WDTV and my laptop.
I have disabled autotuning, RDC, AV software etc. Tried with jumbo frames, disabling flow control - EVERYTHING
View 4 Replies
View Related
Jan 27, 2011
There are several threads about the network card going to sleep when a laptop is idle, but all of them I've seen just suggest the same things regarding various settings. I still have the same problem despite having set the following settings...
In "Change Plan Settings"
-----------------------------
Dim display: 5 min
Turn off display: 10 min
Sleep: Never
[Code].....
Are there any other settings I've missed that could be causing my card to shut down as soon as my display cuts off? Or is this a bug in Windows 7 Pro?
View 2 Replies
View Related
Dec 28, 2012
What happens is when i put my computer to sleep it will wake up a few seconds later because of my network adapter which has a tick box that says allow this device to wake up the computer, now this isn't my problem because all i have to do is uncheck the box and it will sleep fine. My problem is every time i restart my PC the network adapter decides to revert the settings back forcing me to go and uncheck the power management box. most of the time i forget to do this after a restart or shutdown and i will end up putting the PC to sleep just as i go out or get into bed and it turns back on
View 1 Replies
View Related
Apr 23, 2012
I have a desktop pc and a notebook, and both makes part of my homegroup, however, desktop is the default pc on my network, that would be a "server", and it is configured to enter in suspend mode after 30 minutes, the default configuration of Windows 7. This is my problem: when my desktop enter in suspend mode, I'm not able to access my files and libraries from my notebook.Is it possible to keep a network always enabled even in suspend mode or Windows never can enter in suspend mode if I want to be able to access my network and homegroup? I will prefer to have an option to keep network enabled and accessible but with Windows in suspend mode to save energy, but if that is not possible, ok too.
View 1 Replies
View Related
Mar 4, 2011
I keep losing LAN connection within 1 minute after my computer wakes from sleep modeI cannot ping the router, the DSL modem and anything outside.Windows "repair connection" tool fixes the problem until the next time I put computer to sleep.have Windows 7 32 bit, integrated Intel LAN card. Can't blame McAfee because when I uninstalled it and replaced with Microsoft Essentials this behavior didn't change
View 1 Replies
View Related
May 12, 2011
Recently when I try and connect to the internet my wireless connection network says it is an unidentified network with no internet access. This never happened before.
View 2 Replies
View Related
Oct 26, 2011
(the bytes sent and received). It seems skype calls and watching in browser videos shoot them up into the billions after a few hours +. Upon googling around i am quite alarmed. Why did my network randomly change to "network 3"? A few weeks ago it just said 'network'?
View 7 Replies
View Related
Dec 19, 2009
When i was installing the network connection driver in windows 7, it did not allow me to install the driver. And Intel i not release new driver for windows 7. My desktop board is DP965LT
View 5 Replies
View Related
Nov 5, 2012
Intel core i3 network driver?
View 2 Replies
View Related
Nov 29, 2009
Quote: When will Intel drivers be available to support the Windows 7* operating system (OS) that Microsoft will be releasing to manufacturing on October 22, 2009?
Updated and signed drivers for many of the wireless products will be available to download for the Windows 7 operating system October 22, 2009. Automatically detect wireless adapter and download drivers. That said;
Intel has discontinued support for the Intel ProSet/Wireless 2200BG Network Adapter. There might be some generic drivers capable of Windows 7 out there, but I can't find them on the Intel site.
I did find Vista drivers here.
Update: These drivers worked and this old lappy is now on-line!
View 2 Replies
View Related
Jun 3, 2012
Windows 7 XPS laptop. Connects to the wireless network just fine. However, when I suspend or put the laptop into hibernation it never reconnects. I take the lpatop out of hibernation and it shows a red x through the network icon. I have to try and manually reconnect, and then I just get the spinning blue thing over the network connections without it ever reconnecting. I restart .no problem. I have a bunch of otehr PC's and devices on my home network. I have tried 2 different routers, same problem. None of the other laptops on the network have this problem. This laptop did not have this problem last month. Nothing changed. How do I start de-bugging this
View 7 Replies
View Related
Nov 28, 2009
Ok. so I'm trying to install this Intel 802.11bg driver on my Tosh lappy. (I am installing it from a USB Flash drive, since the machine has no network connections.)
I install in XP2 compatability mode, and the report is that the installation is correct. But on restart, "Windows could not find a driver for your network adapter".
Is there a workaround?
View 2 Replies
View Related
Jan 14, 2013
I have an Asus U56E which has an Intel Centrino 6150 Wireless N + Wimax network adapter on it. This card ran fine the first few months I had it. Then I installed Ubuntu 12.04 with my windows install and ran it dual boot. The card worked fine on Windows but I had to make some configuration changes on Ubuntu for it to run. I did that and it worked fine still. Then, naively, I installed a registry cleaner (wise registry cleaner to be exact), and some time after installing it and running it regularly (usually 2-3 times a week) something went wrong and I started getting this issue with my card. What happens is the wireless will be functioning for some time, perfectly normal, and then it will just lose internet connection. I will have to disable and re-enable the adapter through device manager to get it to work but that only works sometimes, most of the time the device just won't start again and I will get the device can not start error in device manager. Also, when this happens I usually restart my computer and sometimes when I do that (or even when I just turn my laptop on or come back from putting it to sleep) the adapter is not recognized at all, doesn't even show up in device manager. What's most odd about that is that the Wimax still shows up on the list of network adapters but the wireless doesn't show up.The steps I have taken to try and remedy this issue are, re-install the drivers (by uninstalling them first) from both the asus and intel websites, do a fresh install of Windows (didn't fix the problem but made it occur a little less) and open my laptop casing and unplug and replug the network adapter.I'm not sure what to do from here, I'm assuming its the card itself at this point that is messed up and my speculations with the registry cleaner causing the issue were just a time coincidence. However, I want to be certain that is the case instead of going out and spending time and money getting a new network adapter when the problem lies elsewhere.
View 1 Replies
View Related
Dec 12, 2012
I am able to access the internet through my wireless work computer and xbox. my home dell laptop will not connect to the internet. It is showing that i am connected to the linksys but Access type says no internet connection. I have already tried and ran FSS.exe becuase thought it might be a malware issue.
View 1 Replies
View Related
Jun 10, 2009
i have problem to set up a new conection.please tell everyone how to set up a new connection.i cant make access my home network.After make new connection i see is public network not home network.i see there two connection there and in home network no internet access. how to make one home network connection.
View 6 Replies
View Related
Nov 6, 2009
i am thinking it it might be because i have bridged my connection for my 360, but i have a red x on my network connection but i still have full internet. i already searched and did many steps...even the cmd one but no luck. so could it be from my wired 360 via bridge connection?
View 6 Replies
View Related
Dec 15, 2011
I can�t get anything faster than 5Mbs transfers over my network. This is what I have connected. I�m using a Dlink DIR-655 Router, set to connect at 1Gbps, Western Digital NAS drive, it says it�s connected at 1Gbps, and my laptop is set to connect at 1Gbps also. My laptop has a Realtek NIC, with the lastest drivers that I can find. Every thing is set to 1Gbps and, they all connect at that speed, but transferring between my NAS and my laptop, I ONLY get right at 5Mbs. Everything is connected with Cat5e cables, no long runs or anything. I�ve looked at several forums to figure out what I can do to get higher transfer speeds
View 1 Replies
View Related
Jul 20, 2012
I noticed that my drivers for this nic card are out of date somewhat. 2009 version.However thats not my problem thats immediately effecting my computer. Delayed or halted shutdown. runnin win7 64 bit raid 5 just installed Kasp pure 2.0 however i dont think thats the problem as i had pure 1.0 before this.
View 2 Replies
View Related
May 29, 2012
I found that my Windows 7 64 bit machine was not sleeping reliably. I changed the sleep time by entering "sleep" into the search box which brought me to "Power Options/Edit Plan Settings" and I entered 5 minutes for "turn off display" and 15 minutes for "put the computer to sleep".
View 2 Replies
View Related
Jul 2, 2011
I want to change DNS address but when in "Network connection properties" I select the "Internet Protocol Version 4 (TCP/IPv4) line the Properties button is not active and I can not click it to open and change the DNS address.Also I see now that Properties button is inactive for all the other lines too.. I can't find the reason of that..Did I restrict something by mistake? or is it another problem..I'm on Windows 7 Home Professional..
View 8 Replies
View Related
Apr 7, 2011
If I am connected to the network I am not able to logon. Once I disconnect the network cable I can logon and than I need to reconnect the cable again to be able to work properly.If I lock the screen and I want to unlock it again I need to disconnect the network cable to be able to logon.See the pic for the error messages: (its in dutch sorry)We tried to remove the object in AD and added it again but no joy. All accounts (also admin accounts) on the machine have the same impact
View 8 Replies
View Related
Feb 3, 2011
I am having an issue with a windows 7 laptop (premium)If I am connected to the network I am not able to logon. Once I disconnect the network cable I can logon and than I need to reconnect the cable again to be able to work properly.If I lock the screen and I want to unlock it again I need to disconnect the network cable to be able to logon.SWe tried to remove the object in AD and added it again but no joy. All accounts (also admin accounts) on the machine have the same impact.
View 2 Replies
View Related
Jul 16, 2009
I have RC 7100x64 connected (per cat cable) to a wireless router. Windows 7 created a home network. Router is perfectly fine and my 2 laptops automatically login into the internet. In the beginning my despktop also jsut was able to be online after booting up.
At some point (I did all updates, installed all my software) the PC does not connect to the internet anymore. Tehonly way to get online is to:
- open Network Center
- leftclick "Connections: local area connection" --> disable
- go to trouble shoot problems
- then it finds " the local area network adapter is disabled"
- I click " fix it" and it will work.
I attached the screens
How can I make it connect automatically (as it did before)? I set all services I could think of to " automatic" (IP Helper etc.). From researching I read that XP had a similar problem with SP3. not sure if it is related, but coudl an update be at fault?
Everything is up to date, Kasperksy keeps viruses away, I did not do one of the registry-cleaner tools.
Since it worked at first, one of my isntallations or updates must have done it. I also did some of the "service optimizations" from here bu tundid all of them to resolve my problem.
One could say I should isntall a newer built, but first I just want to use it before I buy the real deal in October. Second, it used to work with RC 7100 and going through all the trouble reinstalling is a hassle.
Everything else works well.
View 5 Replies
View Related
Oct 9, 2011
Out of the blue, I lost my Network and Internet connectivity Windows 7 gave me excellent troubleshooting tips like to check if I have a cable connected.Device manager tells me that my network adapter is working properly (Realtek GBE).When I try to connect to a network it tells me no network connection found. The machine is still configured as it was out of the box (relatively new machine - Dell XPS Studio 9100 - Windows 7 Home Edition 64 Bit). It been working fine for almost a year. I sincerely hope reformatting and reinstalling Windows 7 is not the answer to every windows 7 problem
View 9 Replies
View Related
Feb 26, 2012
So, we have a network of about one terabyte of storage on it. It is normally connected to my laptop, a desktop and our Playstation 3. Obviously it connects via internet with our wireless router and such but for some reason it won't connect to my laptop? I have everything except a few programs on the network (Everything from my documents to my pictures to my other programs are stored on the network)...thus not being able to access it is a HUGE difficulty
View 2 Replies
View Related
May 28, 2012
I am doing some troubleshooting and I want to completely remove my network connection. I remember with Windows XP when I did this, it would re-detect the network card and reload the drivers and settings after I rebooted.
I can disable the connection but not delete. How do I remove the connection in Windows 7 x64?
View 1 Replies
View Related