Will Not Connect To Internet After System Restore?
Dec 23, 2011
Today I turned on my computer to be met with a blue screen which it says was a registry issue. After looking on forums I found out that people have previously done a startup repair to fix the problem. So, I did this and it asked to do a system restore. After starting up again it refuses to connect to the Internet. It also came up with a message saying that 'Event Log Service is Unavailable'. I really don't want to wipe the computer and start again because I really like how I've set it up, plus I have managed to lose the disk with Windows 7 on it. My computer has a wired Internet connection. Restarted the hub, still doesn't work.
View 1 Replies
ADVERTISEMENT
Feb 5, 2012
I just restored Windows 7 Home Premium and for some reason I can't connect to the internet anymore. When I run my Diagnostic Tool it says that the computer is properly set up but that the following ressource "(w w w. microsoft. com)" seems to be unrespnsive. Drivers are up to date and network card is 802.11n Wireless LAN card from Ralink technology Corp.
View 9 Replies
View Related
Apr 18, 2011
I have a Compaq Laptop It run on Windows Vista Home Premium 32bit. It is having this problem that the wireless internet won't connect, I have done system restore so many times and every time it still won't work, sometime it will.
View 3 Replies
View Related
Apr 27, 2011
This morning (Wednesday) my desktop computer brought in automaticly Tuesdays (26/04/11) set of patches, 6 in total for my machine. I turned the computer of for as I headed of to work and they installed on the shutdown. On returning from work the updates continued the install procedure on loading, but stuck at 0% for over 20mins. I decided to check the install time for this stage on my laptop 7pro x86 and it wizzed through in a few moments (laptop is a good 6yrs old). I figured the desktop was stuck and hit reset, every time it would get stuck at 0% on configuring the updates. Booted into safemode and ran system restore to the morning. Computer now loads up ok but will not connect to the internet. It would appear that its not getting an IP from the router.
What i've tried so far:After running system restore I've removed the Anti virus (Eset Smart Security). Tried setting manual ip address and ping router and laptop, also tried ping from laptop to desktop, both ways destination unreachable. reinstalled network drivers, same fault occurs. Reset winsock (netsh winsock reset catalog), rebooted after. reset TCP/IP (netsh int ip reset c:esetlog.txt), reported ok, rebooted same fault. ran sfc /scannow, reports system file integrity ok.Unchecked IPv6, same issue occurs. Checked network cables on laptop, ok.
View 9 Replies
View Related
Nov 27, 2012
just got a netbook with win 7. system restore now is broken, backup is missing and i cant see any way to connect to wifi service. system restore and wireless connection worked before i restored to an old system restore point?
View 14 Replies
View Related
Jan 9, 2012
I have an HP Desktop computer and I cannot connect to the internet. The problem started with my mouse not working well then my keyboard so we replaced them (that was a month ago). Then strange thing started to happen, a ticking sound started to sound every few minutes. Apart from that, the computer seems well and functions properly. Then one day when I tried to turn it on, the screen looks different. I am referring to what I usually see on my screen whenever I turn it on. My pc is running on windows 7 but right now it looks like its on XP. Plus I cannot connect to the internet. The icon is no longer on the systems tray and when I tried to do the following:
System restore
Network troubleshooting
It wont allow me, when I do system restore it will say A volume shadow copy service component encountered an unexpected error. Check the application event log for more information (0x80042302).
View 3 Replies
View Related
Apr 10, 2012
System Restore will not create a restore point or restore to a previous date & time.The error message was: A restore point could not be created: An error was detected in the Volume Shadow Copy Server (VSS).The problem occurred while trying to contact VSS writers. Verify that the Event System Sevice and the VSS service are running & check for associated errors in the event logs (0x80042318).Volume Shadow Copy is started & running (done in system events).Event System Sevice and the VSS service are started and running. But no cigar, SR still broken.
View 9 Replies
View Related
Aug 10, 2011
Does anyone know how to schedule/automate a rollback to a system restore point at a set time each day?What i'm trying to do is:1. Disable the standard system restore behavior for creating restore points when installing apps and drivers.2. Automatically/schedule a restore point to be created every morning. (probably using Task Scheduler)3. Automatically/schedule a rollback to that morning restore point every night.This should allow users to mess up the workstation during the day, and restore a working rollback point at night when users are not using a workstation.Updates are scheduled at nighttime, so before that happens, it should rollback to a good restore point, apply updates, then create a working "new" restore point with the updates in the morning....etc.
View 4 Replies
View Related
Jun 26, 2011
So I cleaned my registry using RegSeaker and now my computer BSODs at the 'starting windows' screen, even if I try to start in safe mode. I created a backup of my old registry before cleaning and I can access it using the command prompt that you can access in the system restore options. However, when I try to update the registry with it I get an error message saying 'cannot import.
View 7 Replies
View Related
Feb 9, 2012
OK, so a couple of days ago, my HP desktop crashed and then went through the whole System Recovery loop(I couldn't login to Safe mode, wouldn't let me past the System Recovery Screen). Well I backed up the entire C drive using Backup your files in the menu. Then it shows you all the file types it will back up; i.e photos, videos, e-mails and bookmarks. So I did that to an external hard drive and it comes out to 143GB.Now comes my problem. I've been able to copy everything from the external hard drive using RecoveryMgr.exe which opens the WIM files and saves them to my C: hard drive under System Recovery Files. However it does not seem to work when it comes to putting in my old Thunderbird e-mails, contacts and such or in Firefox to restore my bookmarks, saved passwords.
View 1 Replies
View Related
Dec 28, 2011
I am trying to restore my computer because it launches into system recovery. After I get to the recovery options I tried to do system restore but it tells me there isn't enough space on the disk.
View 6 Replies
View Related
Apr 17, 2012
not A legel verison of window 7. wont to restore to factory setings.
View 1 Replies
View Related
Jan 18, 2013
I have tried a lot of things and I can't get system restore to work. I don't need to use it but I would like my computer to be working since there is no reason for this not to work. I just keep getting ComPlusStaging failed to obtain original copy from %systemroot%/registration all the time.
View 9 Replies
View Related
Nov 17, 2011
i recieved my new lenovo z570 ideapad yesterday...i'll just put some of the spec down incase you want to know.
proccessor: intel i5 (second gen)
graphics: nvidia geforce
os: windows 7 64bit
yadayadayada...
anyway, after charging it up and turning it on, i started to install programmes and other bits and bobs. e.g ituens, flash player. just the usual essentials. i used the laptop to watch videos on Internet, genenral browing such as facebook, so in short, the internet was working fine. just before i went to bed that night i installed avg security (free version) and ran a full scan. when the scan finished, i put the laptop into hibernate, and went to sleep! happy in the knowledge my new gizmo was running smoothly!
just before i woke up i heard the laptop turn off as it had run out of charge. so i plugged it in and charged it up, then turned it on. this is where the problem starts...i connected via wifi however the logo at the bottom right of the screen showed the signal strength meter on empty, with a yellow star covering it. i clicked the icon, and it said, 'not connected, connections are available' and below shows im connected with 5/5 signal strength, but on 'limited access'.
1) there might be a problem with the driver for the local area connection adapter
2)there might be a problem with the driver for the wireless network connection adapter
there are 28 updates, but im unable to update them as i have no internet connection. i also cant connect via the ethernet cable.i cant roll back the drivers as there are no previously installed ones, and i cant update them as i am already up to date.my other laptop (acer aspire 5630 running on vista) works perfectly fine using wifi and the ethernet cable, so i honestly dont know whats wrong. after reading things on my acer about ways to fix the problem i came to the decision to restore the laptop to the time of my first installation which was adobe flash player (which i installed the day before.) i was unable to do a full factory reset as the only options available are to either restore to a backup, or re-install windows (which requires a disc, which i dont have). i also didnt configure a backup as i had only had the laptop a day!
View 9 Replies
View Related
Aug 26, 2012
I have been have some problems with my HP dv 8500 laptop. It has vista on it. I could not get any windows updates. So I backed up my files to a flashdrive and did a system recovery. I have files on the flash drive but cannot transfer them back to the laptop. I would love it if someone could guide me through the process.
View 9 Replies
View Related
Aug 25, 2011
My Windows 7 System Restore doesn't restore. It allows me to set them and tells me they've been done. But on the couple of occasions when I've wanted to use one, no joy. Yes I know I could possibly do it in 'Safe Mode' but that isn't an answer as to why I can't do it in regular mode?
View 2 Replies
View Related
Feb 15, 2012
System restore failed to extract the file. from the restore point. There was a disk failure during the restore. This might be caused by bad sectors on the disk. I get the same message, but with a different file name, with every restore point I try, and I have now tried all seven available restore points, going back to 30 Dec 2011. The computer was working perfectly until 3 days ago when it blue screened, and has not started properly since. It is a Corei5 with 4 GB RAM and is only 12 months old. I just dont believe the drive has that many bad sectors.
View 9 Replies
View Related
May 19, 2012
my Windows 7 after restoring it to factory configurations. I installed Ubuntu 12.04, the installation smooth as butter, but after a few days of usage, the GRUB system screwed up. After a LOT of problems I managed to restore my Laptop to its default configuration. Then, I tried to restore my personal files with the DVDs I made, but when the manager finished, it only showed a folder with all my files in it! And it didn't give me any option to restore these files or something!
View 3 Replies
View Related
Jan 14, 2013
I lost 2987 emails by clicking on email tab in windows task manager All the emails disappeared so now >>??? wondering if Sysytem restore restores email as well with Win 7 are do I have to do like Ive seen ? Go to your documents folder and right click on the folder titled Mail the properties and then the previous versions tab.Click on a restore point from before it was deleted and click restore.
View 3 Replies
View Related
Jul 7, 2012
I have been having problems with my new computer running Win7 Ultimate and have had to do an upgrade install. Now IE8 and Incredimail are unable to connect to the internet although Norton, Windows, System Mechanic, etc.,can all download updates
View 10 Replies
View Related
May 18, 2012
I CAN connect to internet just fine using my wifi BUT I CAN NO LONGER connect to 198.192.1.1!!! Any idea how to solve this problem? I'm using a Dell Insprion 1545 and Win7 32-bit. I never had this issue before, jut popped up when I tried using ICS on a different laptop, an IBM thinkpad T42 also using Win7 and connected to the same network via wifi. Again I can connect to the internet just fine on all my laptops, but 192.168.1.1 (for my netgear router) returns "unable to connect" page!!! have verified (via ipconfig) that my gateway ip is 192.168.1.1. I have valid IPs on all the laptops, but cannot connect to router setup page.
View 3 Replies
View Related
Nov 27, 2011
can i connect my GSM sim to internet through reliance net connect
View 2 Replies
View Related
Mar 8, 2012
I am having the following system configuration
XPS L401X Base
Genuine Windows(R) 7 Home Premium 64bit (English)
Intel(R) Core(TM) i7-740QM Processor
6GB 1333MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB)
640GB 7200RPM Hard Drive
Lately whenever i try to start my computer it pass the Dell Bios and then directly goes to the screen which states
Repair your system or Start windows normally When i chose repair system , it start downloading windows files and then launch the windows , but hung up at the sky blue login window with only movable cusor . When i choose to start windows normally it gives me BSOD momentarly ( hard to see the message) and then restarts again . i tried with the advanced boot up options like
repair my computer , all safe modes , restore to last good configuration but it does the same and hangs at windows loging sky blue window .I Tried to run the Dell PSA+ Diagnostic and it returns with 2000-0146 error . As per the Dell online solutions for this type of error ,I tried to reinstall the Hard disk but the problem still exist.
View 3 Replies
View Related
Oct 2, 2012
Using preinstalled Win 7 Home Premium 64bit on an HP 6813w Pavilion. The original hard drive, a Hitachi HDS721010CLA332 1Tb crashed.1) System Recovery discs was made along with a System Recovery with System Image disc.2) A more current System Image was made on an external hard drive.The Hitachi was replaced with the same model. Checked bios to make sure it was installed correctly.Under System Recovery, Image Restore, Select a System Image Backup there is nothing in the table to choose from as far as a source (disc drive or external drive).A) System Recovery (3 discs) has the HP preinstall file folder on the 3rd disc but is not read by the System Recovery program.B) Under System Restore, Image Restore, Advanced, it asks for a network or driver to be installed. That opens up the directory of C: which is the external hard drive. Under WindowsImageBackup the computer name is identified followed by three entries:[CODE]It seems to me the Recovery and System Restore discs are not functional. Am not a technical person but I have taken this as far as I know how at this point.Printed out all the instructions from HP and Microsoft to follow step by step but the failed discs will not allow me to move forward.
View 2 Replies
View Related
Feb 15, 2013
Living is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with lightening and my computer shut down several times, but I could restart it each time...except for the last time when Windows wouldn't startup. At that point, Start Up Repair came into play. Although I routinely backup on an external drive, of course I never did it this month-DUH!Results from SUR were error free (error code=0x0) on all the parameters tested, however there were the following error codes reported:"Unspecified change to the system configuration might have caused the problem." Failed: 0x1fRepair Action: System FilesFailed: x490There were more options to select for a recovery task, but I didn't try them as they didn't seem to be as salient as the two above.
View 6 Replies
View Related
Jan 30, 2013
ive got a sony vaio laptop that worked fine until i dl a pdf file and tried to view it, the machine froze and i had to reset it, since then it will not boot, booting from hd it gets to the windows logo then flashes up a blue screen with text on it that stays on for 1 sec then it resets and starts again.ive tried the sony recovery tools that shows no partitions on the hd, system restore says there are no restore points.
View 13 Replies
View Related
Feb 6, 2013
I am using Windows 7 Professional (64-bit) 6.1.7601 Service Pack 1. I used System Restore to undo system changes to my computer. I want to undo this System Restore operation, but System Restore says there are no restore points.
View 1 Replies
View Related
Sep 30, 2012
I recently did a system restore and when I started it up some of the documents are gone from the desktop. retrieve them they where word files .
View 1 Replies
View Related
Mar 23, 2010
I can create restore points. I just can't restore from them. I get this message:
System restore failed while restoring the registry from the restore point. The restore point was damaged or was deleted during the restore.
I have tried restoring in Safe Mode.I have deleted all restore points and turned off sys protection, rebooted and turned System protection back on.I have uninstalled Kaspersky (my system protection).I have made sure Volume Shadow Copy is started.
View 5 Replies
View Related
Feb 8, 2013
I am using Windows 7 Professional (64-bit) 6.1.7601 Service Pack 1. I used System Restore to undo system changes to my computer. I want to undo this System Restore operation, but System Restore says there are no restore points. How then can I undo this?
There were many, many restore points before. I have recovered the entire contents of C: with Recuva. What do the restore points look like?
View 1 Replies
View Related
Mar 21, 2011
I want to have a Factory Reset of my computer. In order to launch a System Recovery, I need to create Restore Discs. When I launch the Recovery Disc Creation, it says:"This computer does not have a burning drive, which is required to make DVDs. Please contact HP Support for asistance."My computer did not come with a build in CD Drive. Even plugging in a USB CD Drive will not make creating the discs possible. So. I ask you. How can I reset my computer to Factory Condition?
Computer Specs:
Windows 7 Home Premium (64-Bit)
Model: HP Pavillion dm3 Notebook PC
edit: This notebook came with a Recovery Partition built in.
View 4 Replies
View Related
