I have another thread - Selective removal of SP1? - describing how my Windows 7 won't run unpatched vmware - something I need for work - with SP1 installed on my computer.
Wondering if there's some other "clever" way of making vmware run on a Windows 7 machine? Perhaps even by running it in XP compatibility mode?
I just got a Corsair 800D case and I am looking for a nice lighting kit for it.
View 4 Replies View Relatedjust downloaded the leaked windows 8 (downloaded the newer better version) and im trying to install in vmware just to have a look at it, i know it has hardly any driver support and is buggy ect.So when i try and install i get the 0x000000D5 error and it asked me to restart.My vmware supports up to windows 7 64bit and apparently the windows 8 installer uses the same architecture, so has anyone been successful installing this via vmware or any other virtual app?
View 1 Replies View RelatedMy OS is Windows 7 64 bit. I installed VMware and then Win8 (pre release) in VMware. Can I have two operating systems on VMware? I would like to install Ubunto and would like to know if that can be done.
View 5 Replies View RelatedI've installed last week VMware on my laptop with Windows 7 home premium edition (Italian version). Then I've installed XP professional (English version licenced) from my Cd. Everything was going fine. Today I would install an Xp software but on the programm list I cannot find the VMware software, it disappeared, I've looking in the Windows/programs to find an exe file for it without finding one.
View 2 Replies View RelatedI have a Windows 7 64-bit installation disc that I used to install Windows 7 with on my laptop. I am planning on installing Windows 7 on VMWare player with the same 64-bit disc, but as a trial (since my main key is used on the main host/laptop). Will I be able to just run the 30-day trial on VMWare for testing purposes? Also, once the trial ends, can I just delete the virtual machine and make a new windows 7 VM, setting up a 30-day trial again?
View 3 Replies View RelatedHas anyone tried ReadyBoost on a virtual Windows 7 machine on a Mac running VMWare Fusion?
I am running Windows 7 on a Macbook Pro with 8GB of RAM and the Virtual Windows machine really slows everything down globally. I have tried configuring the Windows VR with 2GB, 1.5GB and 1GB of RAM. Configuring the virtual machine with more than 2GB of RAM really slows down the Mac. Hoping that ReadyBoost might improve things.
When i power On Vmware Windows 7 The file specified is not a virtual disk. I get this error The file specified is not a virtual disk.
View 2 Replies View Relatedhow to enable the usb device both windows and VMware workstation environment?i am used Linux in VMware as a same time also used windows in normal environment..i need to use my pen drive in both environment but i couldn't find USB in windows if it is running on linux and other-way round also happen.
View 2 Replies View Relatedi want to install windows server 2008 enterprise 32 bit in the VMWAre and after installing I want to use all the features
View 4 Replies View RelatedI am doing a clean install using the upgrade DVD but on a virtual machine (on a Mac using VMWare Mac Fusion). Everything goes smooth and as per the tutorial except that once I arrive to the "Windows product key", it does not recognize the product key. I skipped that step and completed all other steps as indicated. However, I was unable to activate my windows 7 (last step) as it mentioned that the product is only for upgrade from older version and not for a clean install.
I do have windows XP copy but I would rather do a clean install.
I'm about to install Windows 8 preview in a virtual environment (VM ware player). Am I correct if I suppose that no traces are being left within Window 7 if I do so and if I uninstall Windows 8 from within VM ware player at a later time? Is there anything special to be considered?
View 6 Replies View RelatedI'd like to set the IPv4 Address of a VMware workstation to the following listed below:
VMware Workstation
IPv4 Address: 10.10.10.100
Subnet: 255.255.255.0
Host
IPv4 Address: 192.168.1.101
Subnet Mask: 255.255.255.0
How would I go about implementing the change of the IPv4 Address without changing the LAN.
I have a vista PC and all my software discs were stolen. I want to upgrade to win 7 but keep my vista drive intact to run in a virtual environment. I intend to keep the vista hard drive and run it on a win 7 machine in a virtual environment. Can I run an external drive with pre installed vista in a virtual machine on windows 7 or is an actual vista instillation required.
View 4 Replies View RelatedI've recently bought a new PC with Windows 7 on it. My old PCI TV card, webcam, scanner etc. won't work on new Windows (6-7 years old devices with no Windows 7 drivers that could be found anywhere on net). Is there any way that I can use my old PCI TV card on new PC using VMWare?
P.S. I bought new PCI TV card, but I just can't get it to work fine [always have to switch between front mic/line in, every 2-3 days i have to scan for channels, can't set the volume level (+/- but it's always the same) etc.]. The new TV card is iNTEX Philips 7130!? Can I make it run on VMWare Windows XP machine?
Months ago I installed VMware player 4.0.2-28060 to install a VM which completed successfully as it should, about a week ago I wanted to update my version of the software. I downloaded and attempted to install 4.0.4-744019 and encountered an error stating that some files could not be found, Does anyone have any idea where I could get the installation package for VMware player 4.0.2-28060? I've searched both google and the VMware site it's self over several times
View 1 Replies View RelatedWhen I try to join a homegroup from the virtual PC it does not show me the Homegroup of the laptop, instead it prompts me to create a new homegroup. I create a new homegroup with the name HOME (same as the laptop homegoup name). After that the two computers, the laptop and the virtual PC in the laptop do not communicate with each other in the network. Therefore I conclude that somehow there are two different homegroups with the same name, one in the laptop and the other one in the virtual PC.
View 1 Replies View RelatedI have been trying to install OSX Lion on VMware with the help of [Working Method] Install Mac 10.7 Lion on VMware - Windows 7 Intel PC The installer gets stucked at Boot screen, and OSX logo automatically changes to grey color no-entry sign.What should i do..?
View 1 Replies View Relatedi am trying to install nt 4.0 in vmware player with windows 7 home 64 bit system as host. while installing i receive a message during the nt setup that states, "setup has determined thay your computers startup hard disk is new, or have been erased, or that an operating system is installed on your computer with which windows nt cannot coexist".it goes on to state that "continuing may damage or destroy the existing operating system." it continues "if your hard drive is new or has been erased or you want to discard its current content press enter to continue setup."is this a normal message? i saw a Internet video showing the install of nt 4.0 and did not see the author getting this message. my concern is damaging my host os(windows 7) by continuing with the installation.
View 2 Replies View RelatedJust a little hard to find bit of info on increasing the graphics size memory for the virtual SVGA graphics adapter on a Virtual Machine running under vmware products.
The default is only 16 MB (VRAM) which probably isn't enough to get Aero going on a Windows 7 Virtual machine. You need WKS 7 / vmware workstation 3.0 for 3D support in any case.
Solution
Edit the .vmx file with notepad (Open with notepad) and insert this line
svga.vramSize = "sizeInBytes"
I think 64MB is needed for AERO -- mine works with 64MB - but you could try 32.
Vm runs with FULL AERO -- no prob at all.
here's what I added to my .vmx file for a Windows 7 Professional X-64 Virtual machine - look at the last line.
pciBridge7.pciSlotNumber = "24"
scsi0.pciSlotNumber = "160"
usb.pciSlotNumber = "32"
ethernet0.pciSlotNumber = "33"
sound.pciSlotNumber = "34"
ehci.pciSlotNumber = "35"
vmci0.pciSlotNumber = "36"
scsi0.sasWWID = "50 05 05 66 67 3e f6 b0"
vmotion.checkpointFBSize = "134217728"
usb:0.present = "TRUE"
usb:1.present = "TRUE"
ethernet0.generatedAddressOffset = "0"
vmci0.id = "780936453"
usb:1.deviceType = "hub"
usb:0.deviceType = "mouse"
ide1:0.autodetect = "FALSE"
ide1:0.allowGuestConnectionControl = "FALSE"
tools.upgrade.policy = "manual"
scsi0:1.present = "TRUE"
scsi0:1.fileName = "Windows 7_pro x64-0.vmdk"
scsi0:1.redo = ""
floppy0.present = "FALSE"
ide1:0.startConnected = "TRUE"
svga.vramSize = "64000000"
Give it say 64 MB. Don't forget its size in BYTES you have to set -- if you do it wrong then the VM won't power on so backup the .vmx file before messing around with it.
So ive set up incoming connections to my Windows 7 ultimate personal computer. I've configured the 1723 port on my router as well so connections can be allowed.
I've added a user and password for the vmware machine to connect its running Windows 7 x86 home premium.
When im trying to connect to my personal computer from the virtual machine ill get the errors listed in the title depending on the network selected for the vmware machine being NAT/Bridged ect , as Ive played around with them to see if it will work.
I have been using vmware player for just a few weeks and have had no problem with network connection up until last week when I did some changes (Windows e-activation and removals using 'Hijack This'. I have obviously deleted lots of stuff I am not suppose to delete as I have had nothing but pc problems ever since. My host machine is Windows XP SP3 Guest OS is Scientific Linux When I go to verify which processes are running it only shows vmnat.exe running but not vmnetdhcp.exe so I try to see if I can install vmnetdhcp.exe but get the pop-up window message "DllRegisterServer entry point was not found".
View 1 Replies View Relatedi recently uninstalled vmware, but half my ram is still allocated to the virtual pc, which means my laptop now sucks, i only have 512mb ram anyway. Can someone let me know how to get my ram back?
View 1 Replies View RelatedI am trying to install Windows 7 on a VMware 7 virtual machine, and it is asking for a driver. Windows 7 installs on just about any hardware you can throw at it. I have tried it on an ancient workstation with SCSI drives, and it installs without a problem. The same with serial ATA machines. Under Windows XP you would have to first supply it with a driver.
But now when I try to install Windows 7 on a VMware 7 virtual machine, it won't install. After the preliminary steps of asking for language and localization, it asks for a driver. Any idea why it does that, and what kind of driver it wants, and where I can get hold of one?
For those who want to try out SUSE LINUX 11.4 (KDE version) without hassle of install etc then you can download a vmware version with a lot of apps already installed.The link also gives a few other Linux distro choices. These should also work with VMPLAYER too if you don't have vmware workstation.VMware image and appliance download Use the Bittorrent download to keep the server load bandwidth down -- BTW this is a 100% TOTALLY LEGAL and GOOD use of Bittorrent - all torrents aren't illegal / pirated software. Loads of linux distros are supplied this way as well.(Hope not against Forum rules - but I do know lots of people have an interest in trying out / learning Linux and by running as a VM on Windows seems to me an EXCELLENT way of not only learning about Linux but also discovering the great use of Virtual Machines too).
View 2 Replies View RelatedI was using this product the other day in production at work and noticed that 5.0 was much slower than the 4.x versions of the product. I found that VMWare enabled SSL encryption during the conversion and this slows down the process by 2-3x. A box I used to be able to convert in 4 hours and 50 minutes, took 11 hours and 50 minutes. Anyway, you can easily change the behavior. Navigate to C:ProgramDataVMwareVMware vCenter Converter Standalone and edit the converter-worker.xml file.
Near the bottom, you will find this section: Code: <nfc>
<readTimeoutMs>120000</readTimeoutMs>
<useSsl>true</useSsl>
<!-- Delay is specified in milliseconds, -1 denotes the default.
<acceptTimeoutMs>-1</acceptTimeoutMs>
<requestTimeoutMs>-1</requestTimeoutMs>
[code]......
Then simply restart the VMware vCenter Converter StandAlone worker service.
I am trying to deliberately set a different date in my guest os to that of my host os. My host is Windows 7 (x64), my guest is XP (SP3), and my virtualization software is VMware Workstation (7). In an attempt to set this up I have done the following -
1). Added a line to the VMX file
2). Booted into and modified the BIOS settings of the guest XP os (setting the date back in time to the 08/08/2008) -
3). Disabled the guest XP os internet time synchronization settings -
When I first boot into the XP guest I see the following date - However after about 2 - 5 seconds the date is restored to that on the Host - how to set a different guest os date / time.
We have a Windows 7 Host running VMware Workstation with 5 virtual machines, One Windows server, 2 Windows 7 machines and 2 Windows XP machines.The host and non server VM's are fine, they run 100% of the time and never have problems, my SBS 2011 VM is another story. There have been nothing but crashe's over the past 6 months and they are fairly random.I beleive the server BSOD's and then it reboots, upon rebooting it just sits at a black loading windows screen forever until you completely power it off and then back on, at which time it boots up normally.The BSOD's happen ususaly around 12 AM when Windows server backup runs and creates a server backup on another server over the network, the backup runs 7 days a week but we only see the BSOD about twice a month.I have run through drivers in my SBS 2011 install and all seem up to date to me.
View 5 Replies View RelatedAnyone know why having the latest VMWare Player installed, makes you click on your user account at the log on screen after bootup on the Host machine without having a password protected account, when if you didn't, would normally just boot into Windows??
I'm thinking maybe since I didn't set up a password with the installation of my guest Win 7 VM..hmm.
Some server game banned my macaddress (NIC).So now I can't login this game with my lan card (Local Area Connection) in my windows but I sloved problem by play that game in VMWARE that have a virtual network adaptor with a new macaddress Question is if it possible to create virtual network adaptor with new macaddress in my windows7 , Not in vmware or vitual pc etc...Because I want to play this game in my windows but this server banned my lan card myaddress I need a new connection that have a new macaddress like vmware network adator.
View 1 Replies View Relatedi follow your tutorial and I preparate a zip folder with sf diagnostic tool. In my new sony vaio notebook vpcf2, just using it with different application opened (not always the same but usually: eclipse, sqldeveloper, vmware player, chrome, firefox, iexplorer) the pc shutdown with a BSOD.
View 9 Replies View Related
