Virtual XP - No Record & No External Sound?
May 13, 2012
I tried another forum with this, but didn't have any replies, so I'll try this forum as a last resort before uninstalling it as it's more hassle than it's worth:I have set up a VM. It was working fine yesterday apart from the networking which I now have operative. However:Yesterday the attached USB soundcard was working fine when activated for both playback and record. Today it isn't.t is available in the USB dropdown as unknown device. Attaching it allows me to hear external sounds.Releasing it stops the sounds, so it is being recognised at some level or other.System sounds come through the host machine's sound system.There is only an 'MS RDP Audio Device' in Control Panel|Sounds for playback; there is no record.Yesterday it was a (virtual) Soundblaster with the USB device available as an alternative in both Record and Playback.The USB SC is a good quality device with a combined Mic and Digital input and a stereo output. Although there is a USB expansion card fitted to the host machine, the USB sound device is not on it
View 2 Replies
ADVERTISEMENT
Feb 19, 2009
I've had this problem since windows vista, in windows xp i could record my line in perfectly, without any problems, but now, even if i enabled Stereo mix(tried mono also) it won't make any sound when i try playing some music.
Anyony that can help me with this?
Also, as stated in the title, i'm using an USB sound card device.
View 4 Replies
View Related
Sep 19, 2010
I have Windows 7 and have successfully recorded sound clips using the Accessories Sound Recorder. Next time I recorded a sound I carelessly plugged the mic into the earphone socket. Naturally I was unable to play back a previously recorded sound so I fiddled with the settings (I'm descended from a long line of idiots). Then the penny dropped and I plugged the mic into the correct socket, now because of my fiddling I can't record clips that will play back. I can play back my earlier clips.
View 7 Replies
View Related
Dec 30, 2009
I have upgraded from Vista to Windows 7 week ago.I use audacity to record audio from stereo mix.But I am not able to record from stereo mix anymore since I upgraded to Windows 7.Because there is no sound coming from Stereo Mix,it used to work before I upgraded to windows 7,I have searched for solutions,tried installing virtual drivers etc. and it has nothing to do with audacity,I am sure that I have configured it right.I have few questions regarding this problem;
-Is there any way to fix the sound issue with Stereo Mix?
-If not,is there any way to record from headphones with audacity,or set headphones as a recording device?
-Any other ways to record audio I am hearing from my headphones with audacity?
I am using : Realtek High Definition Audio,driver version 6.0.1.5882
View 6 Replies
View Related
Mar 5, 2012
I used to be able to record sound. I used to have a vista system and was never able to record sound (what I you hear i.e. streaming sound) so as soon as I got my new windows 7 laptop it was the first thing I checked. I have selected the SoundMix as my default device, I did that when I first got the laptop and as I said I was able to record the streaming sound, now I cannot however and looking at the recording devices, everything is set to default and as the guide shows. I used Roemer software free HiQ recorder because it shows the levels when sound can be detected by the software (the left and right levels move up and down showing that sound is being detected) and nothing is showing there at all. The levels don't move. The built in sound recorder doesn't record anything either and the volume level box is completely empty.
Is their some other setting or properties that has some how switched off or muted or something? I have been through the RealTek HD Audio panel and tested everything. I do have sound, I can listen to music so its not like I have no sound entirely. Also I have an inbuilt microphone in the lid of the laptop and it's on. If I tap the mic hole on the lid you can hear it is on and the sound recorders don't record even the sound of my tapping the mic! Again, I used to be able to record sound and now I cannot! In the living room we have a desktop with the same sound card, RealTek HD Audio on Windows 7 and that records sound as well.
View 6 Replies
View Related
Sep 8, 2012
I want to read and record stories for my grandchildren to put on cd for Christmas. WHen I use the wondows 7 sound recorder, I sound so far away. I have tried to use a gaming headset with a microphone also but still, it's barely audible.. How I can make this recording clear, and loud?
View 1 Replies
View Related
Sep 20, 2012
Im trying to playback audio for sstv through my sound card and the "Stereo Mix" option is missing as an audio input (recording) method. I have some in-product sound card that came from Dell so I've been told it may not be possible. But I've found free software that does record in the same exact way that "Stereo Mix" would. Is there any universal sound drivers out there that would add "Stereo Mix" as an option?
View 1 Replies
View Related
Mar 21, 2011
I have a HDD that has Windows 7 installed on it. I want to connect this drive to another machine, and boot it as a virtual machine. (i.e. boot the OS on the drive in another OS on machine #2).
View 8 Replies
View Related
May 12, 2012
[Win-7 Pro 64-bit with free XP-Pro virtual machine]I have set up a VM. It was working fine yesterday apart from the networking which I now have operative. However:Yesterday the attached USB soundcard was working fine when activated for both playback and record.Today it isn't.It is available in the USB dropdown as unknown device. Attaching it allows me to hear external sounds. Releasing it stops the sounds, so it is being recognised at some level or other. System sounds come through the host machine's sound system.There is only an 'MS RDP Audio Device' in Control Panel|Sounds for playback; there is no record. Yesterday it was a (virtual) Soundblaster with the USB device available as an alternative in both Record and Playback.The USB SC is a good quality device with a combined Mic and Digital input and a stereo output. Although there is a USB expansion card fitted to the host machine, the USB sound device is not on it.
View 1 Replies
View Related
Sep 18, 2011
My tv wont play any sound. I changed drives but that didnt work. The tv is new and is full hd so i dont believe the tv is the problem.
View 2 Replies
View Related
Jul 25, 2009
My onboard soundcard isn't working with Windows 7. I really like the performance Windows 7 is giving me for everything, from games (no sound), to processor-heavy loads, but I just can't get the audio to work. I have tried a lot of sound drivers listed in these forums, but they all say the drivers can't find suitable hardware and exits the install.
View 2 Replies
View Related
Aug 4, 2009
As old as Creative Extigy external sound device is it was easy to install and set up in Windows 7 by using compatible with XP and the latest old drivers Creative has along with their player. Using 5.1 speaker set up with Artez speakers connected to the external device made it easier.
View 9 Replies
View Related
Feb 20, 2012
i ask to during installation of windows7 not working or cant boot-up
View 1 Replies
View Related
Dec 14, 2012
I upgraded to Windows 7, but I have a few software I installed on Virtual PC 2007 before. I use XP mode but can't find a way to use the virtual HD created with Virtual PC 2007. Is there a way to convert the virtual HD so that XP mode can recognize?
View 1 Replies
View Related
May 5, 2009
How to Change Virtual Machine Settings in Windows Virtual PC ?
View 0 Replies
View Related
Oct 12, 2009
Does any one know if Tascam us-122 external sound device works with 7 x64? If so is there anything special that needs to be done in order to get it to function properly?
View 9 Replies
View Related
Jun 26, 2009
My friend's laptop has a weird problem. It was running vista fine, sound worked and everything. One day, the internal speakers randomly stopped emitting any sound. However, they do make sound effect sounds while the computer is booting.I figured it was a software problem, so he just reformatted and installed 7. Same problem. Makes the booting up noises, "Gamers Republic... BOOM", obviously coming from the internal speakers.
View 5 Replies
View Related
Aug 12, 2009
So I installed 7 Pro RTM, and plugged in my external sound card and no dice. I wouldn't normally care as I have a working PCI soundcard, except that its a really really high quality DAC, and it cost me a lot of money, so I'd rather not just forget all about it
On XP it uses just generic usbaudio.sys, it works on macs, linux, etc without any issues. What can I try? I attempted to copy across a windows xp version of usbaudio.sys, but that didn't seem to help (I'm not entirely sure I did this correctly).
View 2 Replies
View Related
Oct 16, 2010
I have a HP built box that I purchased less than a year ago. The hard drive died, along with the motherboard.I purchased a new hard drive and the full version of Windows 7 Home Premium 64bit and had the shop replace the MB, Install the new hard drive and O/S.The motherboard is an ASUS M4A785-M, with an on-board Realtek PCIe GBE Family Controller (according to Windows Device Manager).I have a couple of additional cards installed, one is an eSata controller for an external hard drive and the other is a SIIG DP FireWire 800 3-Port PCIe card.I initially installed the SIIG because the FireWire chip set is Texas Instruments, because I have a PreSonus Firestudio Mobile (sound card, recording hardware)and it only plays nicely with Texas Instruments. The SIIG card shows up in Device Manager under IEEE 1394 Bus host controllers as "Texas Instruments 1394 OHCI Compliant Host Controller", which I "assume" is correct?
My problem is the PreSonus hardware refuses show up in Device Manager or initialize (there is an indicator light on the front of the unit that will glow blue when it is connected or flash blue-red when it isn't). PreSonus has a driver set for the Firestudio Mobile, that is called Universal Control.I have attempted to install Universal Control several times, but each attempt has resulted in failure, with the Driver version showing 0.0.0 etc. I realize this is the problem, but I have no idea how to force the issue.If I could get the PreSonus drivers to install, I would be home free (I think).he PreSonus hardware should show up in Device Manager under Sound, video and game controllers, but it doesn't.I have also posted about the issue on the PreSonus forum, but haven't had any solutions posted.This computer and the hardware are what I use to run my Recording Studio and without the Firestudio, I am effectively out of business.I should also note, that I haven't even installed any other software beyond windows 7, other than a couple of utilities. Not even my DAW or the drivers for my peripheral midi devices.
View 6 Replies
View Related
Jul 25, 2010
How to Delete a Virtual Machine Created with Windows Virtual PC ?
View 0 Replies
View Related
Jan 31, 2010
How to Boot from a CD or DVD in a Windows Virtual PC ?
View 0 Replies
View Related
May 1, 2009
How to Create a Virtual Machine in Windows Virtual PC ?
View 0 Replies
View Related
Nov 30, 2011
Basically i've just got my new laptop this week, had desktop pc's for nearly 10 yrs with internal sound card to power a 5.1 surround system now ive ordered some krk rokik rp5 g2 monitor speakers but i want to be able to play music from laptop with media player etc, through the monitor speakers at good sound quality.i no your can get cheap converters, but i imagine a usb sound card with rca outputs would be a lot better yes?budget around �70 or so. heard creative aint that good for music, more gaming, films, and been told m-audio or tascam are good for audio.
View 2 Replies
View Related
Apr 18, 2012
i have a very strange problem: when i play sound files that reside on my laptop, they play through the external speakers that are connected to my docking station. but when i play a Internet video or there is a web page that plays sound, it will only come through the tiny onboard speakers on the laptop. i've gone through every setting i can find on the computer, without finding anything amiss.
View 1 Replies
View Related
Dec 29, 2009
I am purchasing a Laptop for my DJ rig.. it is a Dell Inspiron running Windows 7 64 bit OS...I am looking for external sound cards (similar to Native Instruments Audio 8 DJ) that are compatible with Win 7 64 bit OS...
View 1 Replies
View Related
Oct 29, 2012
I'm running Windows 7 Home N SP1 x64. I'm using an M-Audio Fast-Track Pro device to record audio into a music sequencer (Cubase 5), through a Shure SM58 Microphone. The M-Audio box is connected to the computer via USB. I've been using this set-up for about a year now and it hadn't caused me any problems until the last few weeks. For some reason Windows is not registering any signal from the input of the M-Audio box. The box itself picks up the sound and I can hear tapping on the microphone when M-Audio is selected as the output device, but not from the built-in speakers.
I first noticed the problem in the software (and thought for the longest time that it was the software). I'm very competent with Cubase and tried everything I could think of to get it to register with no avail. It was only when I tried to use the device on another sequencer that I realised that it's not the software. Then, since the mic works fine, the box itself is picking up the signal and out-putting it through itself, it must be something wrong with the computer or the OS.
I've re-installed the M-Audio driver, didn't make any difference. I've set the M-Audio as default in both playback and recording tabs in the sound control panel. Playback works fine. One thing that's really strange is that when I open manage sound drivers in the control panel and tap on the mic, neither the levels in recording nor playback even flutter, even though I can hear it pretty clearly through the headphones.
View 8 Replies
View Related
Sep 6, 2012
Got a new Windows 7 Enterprise 64 bit machine, found that it did not come with virtual PC. Downloaded the critical patch Windows6.1-KB958559-x64-RefreshPkg.msu and installed it. Windows Virtual PC shows up in my Start Menu. Good so far. I go through the steps to create a virtual machine and use the option to 'use an existing vhd file' and when I click 'Create' I get the above pop-up message "Cannot attach the virtual hard disk to the virtual machine. Check values and try again". A factual message but completely useless as with all error messages from Microsoft. I have tried the following:1. When I attach that vhd using Disk Management, it mounts in drive E:, I can see the files and browse the dirs in E:. In the Disk Management View, the drive shows up as 127 Gigs but 107 is unallocated space. The physical size of the vhd is only 25 Gigs2. Others in my company were able to create the virtual machine with the same vhd, checked the byte size and timing, so nothing is wrong with the vhd file itself.
3. Tried to create after shutting down all virus protection including the Micorsoft antimalware protection service. No luck4. Tried Vhd resize to resize the vhd to a smaller size (since it showed up in disk management as 127 Gigs, I thought maybe it was that size), but VHDResizer could not open the input file, gave an errors "Can only load fixed or dynamic drives"
View 3 Replies
View Related
May 8, 2011
I have been using the MC in win7 to watch Live TV and it has been working fine. Then one day, I go to turn it on and I get a blue box that says "CANNOT RECORD" with an ok button. Press the OK button and noting happens. Meanwhile the TV is playing perfectly fine behind it. how to get rid of the box?
View 1 Replies
View Related
Aug 8, 2011
Is there any way I can record a series, have it record the reruns, but have it not record the same rerun twice? That way I can catch up on series that I have missed and not have to delete multiple episodes.
Maybe it does this automatically as I haven't recorded much yet, but I'm just making sure.
View 2 Replies
View Related
May 5, 2009
I cannot record some of my Recorded TV content to DVD as I get an 'Unsupported File Type' error when trying to do so in Media Center. But other Recorded TV shows burn fine without this error.
Is anyone else experiencing this issue and know why this is happening?
I'm using Windows 7 RC build 7100
View 4 Replies
View Related
Mar 4, 2011
i'm using vlc to record a part of my favorite videos so i can upload them on Internet. there's a small problem, when i try to record hd videos i get a crappy quality, however the original video has a very good quality, consider the following video:
the original video, the one that i record this part from is having a very good quality (hd 720p), it's in mkv format and i guess it's x264. why do i get this quality?
i did the same thing with a non-hd video and it worked better: how can i record with the best quality? at least a quality as same as the original one?
View 2 Replies
View Related