Various Compilers Failing To Rebuild Executable

Mar 24, 2012

No matter what compiler I elect to use (I have tried codeblocks, bloodshed dev C++, visual studio c++ express 2005, visual studio 2008 & 2010 and eclipe [java]) when i attempt to rebuild a project after executing it once, it will link and compile, but and error will appear stating that the compiler could not open the executable to re-write it. I have already attempted the following:

** I have no Antivirus running (windows has a warning stating it).
** I have no firewall running (windows also has a warning about it).
** I have checked process explorer and no Antivirus or firewall is running.
** I have checked process explorer and no other process is attempting to use that executable. (the program terminates from process explorer at the same time it stops running in command prompt)
** I have followed all necessary instruction to make sure cygwin was removed from my computer.

My program will compile & run without any errors (it does this to any code i try to compile, even hello world [so it isn't a coding error]. Its may be a compiler error because it happens with c++ and java [same problem from command line too) or its an ide problem as this happens with multiple ide.

I am going to take a guess and say I either a have a rogue av or firewall (Windows Defender) issue that I can not seem to track down and shut down or windows keeps accessing the project directory (process explorer did show a process name "system" was accessing that project directory). I am the admin for the computer, and the only account on it. I really don't want to dual boot linux just to develop programs.

View 4 Replies


ADVERTISEMENT

Can't Find Text Compilers

Nov 9, 2012

I CANT FIND ANY THING ABOUT TEXT COMPILERS PLZZZ TELL ME SOMETHING ABOUT IT.

View 3 Replies View Related

HDD Not Showing Up After A Rebuild?

Jan 6, 2013

I've just spent the last couple of hours stripping down my rig,for a clean but mainly to do something about the cable management.But since rebuilding it 2 problems have arisen.problem 1 On start up I'm getting the message boot manager is missing .I go through the steps CTL>ALT>DEL then DEL to enter bios and select the drive to boot from in advanced mode F7 (only one drive is there on the initial bios screen where the drag and drop option is)Problem 2 once I've logged in it is only showing 2 of my 3 hard drives.I'm using a z77 mobo 60g ssd boot,256g ssd and a 1tb mechanical.When I go into Computer management the 2 of the 3 drives are visible there.

View 8 Replies View Related

Index - Rebuild

Aug 15, 2009

How to Rebuild the Windows 7 Index ?

View 0 Replies View Related

Solitaire Executable File?

Sep 21, 2012

I am running Windows 7 Commercial.There were no games on this version of 7.My wife wants the "old" Solitaire and Spider Solitaire on this machine.

View 2 Replies View Related

Window's 7 After Computer Rebuild?

Dec 31, 2011

I built my computer years ago and since then have not touched it due to having a macbook for school. I want to upgrade my computer but can't find my Window's 7 cd. If i replace the motherboard, cpu, graphics card, and ram, but keep my old hard drives will my OS still be available? My knowledge about this is slim at the moment until i brush up on everything

View 3 Replies View Related

Random Shutdowns With New Rebuild

Feb 13, 2012

I have begun experiencing random shutdown with my system. I recently re-built my first build adding an SSD, new motherboard, graphics card and memory. [code] I ran the SF Dx tool and included screen shots of CPU-Z tabs and CBS.log filtered for just the SR (system restore) points from the sfc /scannow. Included all files in the zipped Seven Forum folder attached.random shutdowns-periodically I will return to my computer and find a screen asking for a boot drive. hitting space will not work.i have to shut down using the power on button.Usually it boot into windows after the first time.Occasionally I have to power on and off a couple of times.screen bland for 10 to 20 seconds. Occasionally while switching between applications using Alt-Tab the screen will go blank for up to 20 seconds.It recovers on its own with a message saying my GPU shut down and was restarted. I have never actually seen a BSOD (am I in the wrong forum?) but would like to fix these problems.For a time I thought these were problems with my SSD and GPU but when I ran sfc and saw the number of files that weren't repaired I started having concerns.Oh and by the way I have run a variety of diagnostics on the SSD and GPU and nothing was revealed.

View 1 Replies View Related

Icon Cache - Rebuild

Jan 23, 2010

How to Rebuild the Icon Cache in Windows 7 ?

View 0 Replies View Related

Windows 7 Freezes After Rebuild?

Aug 23, 2012

I am running a raid 0 (same as my old system) and it will not install updates. It is also freezing when i go to do anything.

View 4 Replies View Related

Game Executable Not Working In Windows 7 Pro

Jan 10, 2013

When opening any Windows game in win 7 pro, the game opens and then a dialogue box opens and says that the game ececutable has stopped working.

View 4 Replies View Related

How To Rebuild A HD After A Boot/root Infection

Aug 28, 2012

my netgear wireless modem and wireless network were renamed and all the passwords reset. Hard reset to recover. I am still getting browsers redirected daily. All three browsers each will give message that setting have been changed when opened. IE will say search setting have been corrupted and mandate Bing. Internet Options will be reset to custom levels without a reboot. I have installed AVG 2012 paid. No scan from various scanners will show an infected file except some cookies. AVG rescue disk scan found 13 password protected files that were renamed. Broke AVG and required a reinstall. Password protected files were back by the end of the day. AVG says there should be NO password protected files in their sub-directories during a rescue scan. Their solution is a wipe and reinstall.What is the safest process of doing the HD wipe and reinstall? Just plugging the thumb drive in got me all this grief. Is reinstalling files from the DVD the same process? If i try to access my old files am i opening myself to reinfection?

View 1 Replies View Related

Windows Rebuild Freezes After Five Minutes

Nov 3, 2012

I have Toshiba Dynabook that I bought in Japan. It originally had Vista on it, but recently I yanked the hard drive out and replaced it with a new one and installed windows 7 on it. I installed all the drivers it required using driver max and windows update, but it keeps freezing randomly. I ran the disk error check and no change and I tweaked my boot up to only run needed programs. I'm pretty sure it's not an overheating issue because it will run for hours when installing the os. I've already spent more time than I wanted to invest in this and am ready to smash the computer.

View 3 Replies View Related

Create A Batch File That Will Start An Executable?

Oct 31, 2011

I am trying to create a batch file that will start an executable?

View 9 Replies View Related

Extracting Files From An Executable With The Command Prompt?

Sep 23, 2010

I have what I thought should be a relatively straightforward question: What do I type in the command prompt in Windows 7 to extract all the files from inside an .exe? I remember doing it once a long while back, but I forgot how and Google is being especially unhelpful.One result instructed me to navigate to the file's location and type:

filename.exe /A /P C:destinationfolder

but that didn't work. I assumed it was for an older Windows version. Google got its hit from a comment saying it didn't work on Windows 7...

View 4 Replies View Related

Search Options - Cannot Locate Executable For Paint

Apr 11, 2012

I can't locate the executable for paint. I typed paint in search while in C: (system drive) with no success. Instead, it could find hundreds of files matching odd criteria, like if "paint" appeared in the name of the containing folder or in the file description, which is too advanced for a basic search.

And guess what -- the file with the actual name wasn't found. I checked in Organize > Folder and search options > Search > When searching non-indexed locations > Include system directories but in vain. It happened with files created by me as well. So, 2 questions arise, as simple as they can be:

1. How can I check the options to search for a file regular/hidden/system in regular/hidden/system directories?
2. Options for input words location: name/content (not interested in others), regardless of indexations (I don't want to change location indexations for these options to work).

View 6 Replies View Related

User Allowed To Run Executable As Admin Without Prompt?

May 5, 2012

I have a special case where a user needs to run an installed executable as an admin. This exe was written for XP and will only work properly when ran as admin. I do not want the user to have an admin account or the admin pass, but he needs to be able to start and stop this program at will. I have tried checking the box to always run as admin, creating a desktop shortcut to run as admin and I even tried creating a shortcut that uses the command line runas /savecred but all attempts failed. Windows 7 always asks for the admin pass. I understand this is how it is supposed to be, but are there any options available to me? If I turn off UAC will that do the trick? But will turning off UAC override the GPO I have setup for non-admins?

View 3 Replies View Related

Executable Script To Switch Active Displays?

Jan 21, 2011

I have a dual monitor set up in my office with a 23" Asus connected via DVI and a 19" Sony connected via VGA and adapter to my custom build. In my living room I have a TV connected Via Receiver Via adapter(composite/s-video) Via s-video to my same custom build.At the moment I have to go in to "screen resolution" and select the sony from the "Display" menu and then "disconnect this display" from the "Multiple displays" menu. So far I have only disconnected the sony monitor, I still need to extend desktop on to the TV.this gets to be a legthy process when I do it 8 times a day every day. Is there a why to have 1 or 2 executable script that will allow me to switch between the desired displays?

View 1 Replies View Related

Data Recovery On RAID Auto-rebuild On Wrong HDD

Mar 27, 2011

I have win 7 running on RAID 1 using 2 Seagate 750GB hdds...My motherboard is an ASUS P5 series with an onboard Intel Raid chip.So apparently one of the drives went dead and since it's RAID 1 no problem right? Just replace the disk and it will auto rebuild... Problem is, this thing happened just as i was about to step out of my house for a week long vacation... I thought i'd get a new drive when i got back and shutdown the pc to save on power while i was away...Fast forward a week, so i boot up the computer and the Intel Raid boot sequence shows that i have a degraded drive... No biggie... I thought i'd boot it up first and replace the degraded drive later... What i didn't notice was that Intel Raid controller had designated another one of my existing drives as a spare and marked it for auto rebuild in Windows...So, upon booting into Windows, Intel Rapid Storage starts rebuilding on the wrong drive... So now i have 1.5TB HDD data that has been wrongly auto rebuilt... I've sinced replaced the degraded drive and the array is back to normal but my data drive is mush... I tried using Active Undelete and it's able to scan the files and recover but the files are corrupted...

View 5 Replies View Related

Windows 7 Iconcache Doesn't Exist / Won't Rebuild / No Start Menu

Dec 22, 2011

My desktop started having icon issues, so I did a little reading up and saw that it could help by deleting the iconcache.db file. I did so, and now my icons are completely gone. I can still see the text under the icons and can still access the programs, however they are running slower than normal.Also, on a related note, nothing happens when I click the start menu button.I am running Windows 7 Home Pro 64 bit. I have tried all the fixes to no avail, even launched in safe mode.

View 7 Replies View Related

What The Executable File Is (in Windows 7-64bit) That Brings Up The "network And Sharing" Section In Control Panel

Apr 5, 2012

what the executable file is (specifcally in Win 7-64bit) that brings up the "network and Sharing" section in Control Panel or, more specially, the Local Area Connection.

View 5 Replies View Related

Associating Cardfile Data Files With Cardfile.exe Executable

Jan 4, 2010

Copied 32-bit version of cardfile.exe to my W7 PC and voila, it runs like a champ. Problem is I can't associate my Cardfile data files with the executable using the "Open With" function.

1. Copied 32-bit executable into a directory named "Cardfile" within "Program Files (x86)".
2. Copied my Cardfile data files to My Documents and renamed *.crd to *.car due to avoid Windows CardSpace association.
3. Right clicked on one of my *.car files and selected Open With.
4. Navigated to my cardfile.exe executable, clicked Open, but Windows won't accept association and keeps trying to open with Acrobat, first "registered" app on the apps list.

I think this is happening because cardfile.exe was not actually installed and therefore not registered. This was never a problem in XP, but MS always seems to they have to increasingly protect us from ourselves and now it's an issue.Anyone know how I can register cardfile.exe with the OS so I can associate my Cardfile files with the executable and open them directly?

View 4 Replies View Related

Screensaver Keeps Failing

Oct 7, 2012

Win 7 Home Prem SP1, 64 bit, 8 gb ram. Only using the screensavers that come with Windows, no matter which one I select at varying times it will fail. I can normally reboot and it works again for a time or switch to a new selection where it will work for 2-3 weeks again. I can't find any information on others experiencing the same issue and have been using numerous virus/spyware apps to find anything. MS Security Essentials, Avast, Stinger, Housecall, SuperAntiSpyware and only find tracking cookies.I know it would help if I could get the exact error message and will update when I do get a chance to write it down.

View 5 Replies View Related

Failing To Boot From HDD?

Feb 9, 2013

I found my laptop hdd had several bad sectors. Lacking the cash to just buy new i did a full format to get them flagged as unusable. After that took 17hours i installed windows 7 ultimate x64. When it needed to do the necessary restart it failed on the bios screen (the mobo logo intel for example). I tried gettin in the bios to change boot order and cant. However take the hdd out and i can boot from cd or access bios options etc. hdd back n boom fails still. However the processor is still working hard.

View 4 Replies View Related

Backup Keeps Failing?

Jan 21, 2012

I have tried 3 times backing up my system to an external HD I have. Each time, it gives me an error saying it failed. I also see an error code: 0x81000015The strange thing is I have backed up to this HD previously with no problems and now it's not working.The HD has a capacity of 500 GB and currently has 225 GB free. I have cleared out all the backup related information off it and try again and it fails as it gets towards the end of the backup process

View 3 Replies View Related

How To Prevent GPU Fan From Failing Again

Nov 28, 2012

I just returned my failing GPU and replaced it with a new one, still the same brand but with a working fan.I wanted to hear from you guys some tips on how to prevent my GPU from failing again.

View 4 Replies View Related

CPU Failing Prime 95

Nov 8, 2011

I recently built my new rig (specs in profile). Now last night, I was running Prime95 to get an idea of my stock temps, and Core 3 failed (expected x, returned y). Fearing the worst, I reran it, and it again failed, but on a different core. Just to eliminate any RAM issues, I did a couple of passes with Memtest, and seems to be alright there.

View 4 Replies View Related

SSD Failing To Boot?

Apr 12, 2012

got a bit of a serious issue. I've got a Corsair SSD that's no longer booting. It was setup as 1 partition (C drive). I've attempted use the Windows recovery tools via my installation disc but it doesn't even list my hard drive or partition and thus fails to detect the Windows installation.My first thought was a corrupted MBR so I attempted to use the command line tools from the Windows install disc, i.e.bootrec.exe /fixmbr etc. However I get "the system cannot find the path specified" error.I even tried removing the hard drive and putting it into an external enclosure and plugged into another computer via USB. However the 3rd party computer fails to recognise the drive (probably for the same reasons).

View 3 Replies View Related

Network Failing

May 5, 2009

I have been tearing my hair out with my network disconnection issue - OK builds pre 7048 broken after 7057 to 7100. I have a Realtek 8139 NIC. I have tried all sorts of drivers none of them fixed it. Last night I thought I would take a difference approach.

The status windows showed the NIC had received 2,590,---,--- packets within the the first ten minutes of turning on the PC before failing, so some service was chewing a massive amount of data. I used the resource monitor and found that it was PID 4 - SYSTEM, this seemed a bit strange as nothing was running.

It then suddenly occurred that with all my video files sitting on a server on the network maybe it was Media-center indexing the files. So i removed the locations from media-center libraries and instantly the network settled down and there was hardly any traffic. I put a network link into my local video folder so hopefully it wont index the network drive.

I will run it like this for the next couple of days to see if it fixes it, should everything be OK its a bug Microsoft

View 9 Replies View Related

Windows 7 Updates Failing?

Oct 4, 2011

I had a Vista home premium. I updated it to windows 7 premium. It is 32 bit. A lot of my updates have failed. I get code 800 b0100. I have looked it up on the net. I was wondering if I should put my discs in for the windows upgrade and run it thru again over the top of what I have... I also have win 7 64 bit on my network and it was original/ I have no problems with it. Barb aztzu has chosen the best answer to his/her question.Click here to view the answer that was selected.

View 3 Replies View Related

Computer Failing To Boot

Jun 18, 2011

last night my computer just shut down out seemingly for no reason and when i tried to power it back up it was asking me to insert a boot device

i was planning to reformat in a few hours anyway so it didnt phase me to much so i continued to reformat the computer with no issues then once it had finished installing and i got to the desktop it just powered off again except this time it wouldnt load past bios it just kept restarting. the intersting part with the restarts was that the bios would restart but the power to the computer would not get interrupted. Also its not always the exact some position that it decides to restart some times it will be within 1 second sometimes i get to the desktop only for it to shut down again if i try and do anything

i have tried swapping out parts to identify the faulty part. no luck. ive stripped it down to its basic parts ( cpu Mobo ram n gfx) still same thing happens i dont even have the HDs plugged in so i dont believe it to be a virus on the HD. ive tried flashing the Cmos by taking out the battery for half an hour and this seemed to work but it asked for bootmgr so i reformated the HD again only for it all to start happening again.only this time the power does turn off some times.

i have checked the temperature of the CPU and its sitting on around 47 degrees so nothing out of the ordinary the cpu coolant gell is a bit dry but given that there doesnt seem to be a heat issue i dont know why that would make an immediate difference

[code]...

View 3 Replies View Related

Computer Failing To Start

Jan 13, 2012

i have a acer aspire 5735z and its failing to start, it wont even let me reinstall it, - i have windows 7 ultimate on it

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved