I have Windows 7 64 bit, on a Alienware Area 51. Lately when I start or reboot my PC the BIOS is taking about 2.5 mins before my startup begins on the PC.The BIOS is the latest available, and I have changed boot order but still takes so long in the BIOS mode.
View 6 RepliesMy computer seems to be very bogged down. Many programs freeze up and do the "not responding" thing and the internet constantly needs to have pages refreshed.I have malwarebytes pro on here, I have a regular defrag schedule, I uninstall programs that Im not using. Im not sure why its doing this. I checked the task manager and there is like 50 tasks running- is that normal? The task manager cpu graph also spikes to 100 about twice a minute with zero programs running. When i run the internet the task manager cpu graph is steady 50-100. My internet is crazy slow, takes about 30-60 seconds per page to load. I make music on one program and when i render out or when im transfering a file through wetransfer.com or something "heavy" I cant do anything else, my mouse gets all choppy and slow and clicking on like another tab or something isnt happening. It basically doesnt do anything until the big things are done.
I dont understand, I used to run my media player, browse the internet with like 10 tabs open, and run like a paint program or something all at the same time. I have an external hard drive for all my music stuff so there really isnt anything on my computer, like 1 decent sized game and some personal files. I dont really do much on here.Is it possible i deleted a program or something that is a part of the computers natural operating system, and it is tripping over itself or what? Doing a system restore would basically be impossible because I have been baring with this for a while and I dont know when this started and what programs/files I would lose if I restore back a few months.
so i did a bios update, and it wont boot after the update.its a asus m4a79xtd evo (rev 1.01g)i dont have a backup of the bios
View 3 Replies View RelatedSo, I am now successfully dual booting vista and windows 7. No problems whatsoever with the installs or dual boot process.
However, randomly one day after just shutting my computer down and starting it back up again everything about the bios and subsequent loading of the bios and the windows loader screen (where you choose your OS to boot) is PAINFULLY chuggy and slow in response. I have never seen anything like it in all my years of computer experience.
The weird thing is, once it boots into an OS, be it vista or windows 7...I notice absolutely zero slowdown or chuggy issues within the OS. I have ran benchmarks and they are all equal to any other time I've ran them. Indicating that whatever this issue is, it's not affecting the OS itself.
I have hard reset the cmos and completely wiped the bios settings and this chuggy and slow issue still plagues me. I went in and was resetting all my bios settings and every single keytroke took 2 seconds + to activate anything.
Any idea as to what is causing this? Or has anyone even HEARD of this kind of thing happening before? Any thoughts would be greatly appreciated.
After problem with my pc, I had reset my Bios.Now my pc starts very slow and I've lost my Bios-configuration, does somebody how I can get my old configuration back?
View 3 Replies View RelatedI bought this Fujitsu laptop for less than a year. Its only for my school work. It takes forever to bootup, startup and it sometime hangs when I open up a program or typing.For the bootup, it takes very long time on the window logo, after that the black screen, followed by the welcome page with the loading cursor. Each of this process take a long time. For startup, its not so long but its still quite lag. For the opening up of program and typing, everytime I open up my visual studio, it will take a long time to show up and even if it showed up, it will be "not responding".So I will have to open it a second time before I can start using itWhen I am typing my codes, it will randomly hang and show that the program is not responding. I am still able to move my cursor though.
View 9 Replies View RelatedI am choosing which OS to boot by changing the boot order in my BIOS. To me, this seems clean and simple. I built 32 bit XP on one disk, then removed that disk from my system, installed a different disk, and built 64 bit Windows 7.
When both disks are installed, I change the boot order to select the OS I want, and each OS sees and can use the files on either disk.
Am I asking for trouble here, or is this as clean as I think it is? What I want is one set of user document files which can be used from whichever OS has been booted.
how to set bios to from CD. I have dell computer
View 3 Replies View RelatedPC does not boot to the bios.. motherboard is z68x-UD3H-B3F10
View 9 Replies View RelatedI have tried to boot PC to the Bios by taping Delete, in the past it booted to BIOS but now won't.It poots to Windows only, keyboard is fine all keys works.I am not able to get in BIOS, I have updated Bios but nothing help me with this issue.
View 1 Replies View RelatedI bought a legit copy of windows 7 64-bit for my new computer... but i didn't have enough money to buy an optical drive. Is there anyway i could use my laptops optical drive to transfer to files to a USB? And can i boot from the USB from my Bios?
View 4 Replies View RelatedWhen I go into the Bios Boot screen there is no CD, HD etc option. Blank? Any suggestions please?
View 4 Replies View RelatedSeems to be Deadand now other other HP desktop (with the identical motherboard) is now failing as well. This one is a pc6000, and all I ever get is the screen that displayes the BIOS, processor, CPU speed and the 4 memory banks. So far, so good.Then it says Initializing USB controllers.DoneThen several blank lines before it says Press <F10> to enter SetupThen nothing... although sometimes after the 'Done' line it says 1st Drive: None2nd Drive: None3rd Drive: None4th Drive: None00 USB mass storage devices found and configuredbefire going to a new screen where it sayseboot and Select proper Boot device or Insert Boot media in selected Boot device and press a keyPressing any key just redisplays the msg.What could possible be going on with these 2 nearly identical HP desktops with the same mobo?
View 9 Replies View RelatedI've recently purchased a used A665-3DV6 Toshiba Satellite Laptop. It had the BIOS password problem. So I've jumped the CMOS and cleared the password. I've initiated the "out of box state" and it went through the whole process. When it was finished I shut down the computer. Then the next morning I booted the computer up and it stated "HDD Boot Failed". I tried running Factory reset again but there is only a blinking cursor on the top left hand corner of the screen.
View 3 Replies View RelatedI have this weird issue since i installed Comodo Firewall 3.9
I start the computer, the bios logo loads up, it takes 1.5 mins (like 10 sec before) till it continues to the windows boot manager, from there on everything works fine.
So far ive updated my bios, loaded the defaults without any success.
I also disabled my bios "quick boot" feature, and it seems that it lags for 1.5mins at the point where it checks that everything is ok, it says something like: CPU: amd athlon 64...xxxx, thats where it takes 1.5mins, then continues to test memory etc but that took too long for me, and i ran a memtest 2 days ago without any problems.
I wondered if it could be in any way possible that the firewall i installed is causing the problem, as far as i know its not officially Windows 7 compatible.
Some specs that might be useful:
ASUS Crosshair (Newest bios)
AMD Athlon 64 X2 5200+
ASUS ATI EAH4850
2GB of DDR2 memory
Ask if you need any other information.
I have a laptop that I have set-up with 3 OS's; windows 7 (to use), windows 8 (to learn), and Linux (to do everything else). The other day I noticed a few issues and decided I needed to remove windows 8 and Ubuntu in order to prevent a system crash (kinda ironic once you read the whole thing). When I installed Ubuntu and windows 8, I created a 45gb partition for them. Not a big deal. The problem is when I removed ubuntu/windows 8 and their partition, I forgot to set something with the windows 7 partition so it was the main boot partition. Now its trying to boot from a partition on the hard disk that doesn't exist. I know for a fact that the windows partition is completely functional and intact. It's a rookie mistake and I make no excuses. At this point I'm 90% sure I need to reinstall windows 7, which I can easily do as I have restore disks and multiple back-ups. I was just curious if there is a way to change this either through BIOS or using a USB/SATA cable to externally boot and access Windows 7 system files.
View 2 Replies View RelatedOS Windows 7 ProOut of the blue, I started noticing that all the desktop icons were going blank, mouse freezing and now when I reboot, it locks up at the AUTO DETECTING USB MASS STORAGE DEVICES
Device #01 :
Device #02 :
I have checked all the USB things are connected properly, all cables etc. are in but no luck!I can vaguely recall seeing something somewhere during my travels over the PC something about a "media disconnected" and I am sure it was saying something like bigpond.qld.com.au ........... Not 100% sure though.
I have a Lenovo ThinkPad X60 laptop with Win7 32-bit Ultimate and an SSD (I know, I know, just go with it. I'm building a desktop soon). I could list the specs, but that's useless for this problem (I'd think).
At times (not always), when either resuming from hibernate or booting up from a shut down, the computer generally freezes at the point right after the BIOS screen. So it's just a black screen. This is before the window that says "starting up" (literally a window... the Windows logo). Whenever it freezes, it NEVER goes to the boot screen of Windows. I'm assuming this is an error with the hard drive, since the OS is on the SSD and the boot screen is from the mobo. However, this only started happening after a rather heavy fall to the ground that cracked many parts of the plastic shell on the computer. It still works occasionally when I can get it to boot up (nothing different when it boots up... same settings and everything. Spontaneous).
I have tried:
1) Cold reboot
2) Removing battery
3) Going off only battery
4) Unplugging EVERYTHING from the computer
I have not tried chkdsk yet. Is it necessary? Also, would there be a log somewhere of what happened? It never booted into Windows.
We just build a new system to play around with the Intel Rapid Matrix RAID
Asus P8P67 MB + 8GB RAM+ I5 2500K + 2xWD BLUE HD SATA 6 IN SATA 0 and SATA 1 ( SETUP AS RAID Mirror)We install the Window Ultimate 64 Bit in the RAID Drive .... No problem after all the drive install We also allocate 50GB for doing a image backup (Drive F) We restart the system and goto BIOS to set the HD from RAID to AHCI ( This is the situation happen when the BIOS reset)
Supprise me the system can boot form the Drive ...... (In Device Manager .... I see two WD 1TB HD instead of one 1TB RAID Drive) But when I use Disk Manager it takes really long time to run... I can't wait for that long and shut down) On My computer I only see one HD with 4 Partitation ...
I restart the system and Goto the BIOS to reset back to RAID...and it give error..
I but the W7 Ultimate Boot disk to repair but no success.. Try to load the Backup Image .... cannot find it...
From the old time .... if the BIOS reset it will set to IDE Mode ... Then I am'not able to login to window it will come up blue screen and I just reset to RAID it will fine.... But nowadays... the New MB set Default AS AHCI...then I encounter this issue.... Lucky ... we just testing the new system now..
If I have a cooperate customer want to setup a RAID drive and suddenly Power Cut Down.... BIOS reset..
I'm trying to do a startup repair of Windows 7 x64 on an SSD but can't boot from the CD-ROM while in AHCI mode. I have set CD-ROM at the top of the boot order in BIOS but this is just ignored and the computer boots from the SSD with the knackered version of W7x64. I read somewhere that when in AHCI mode, the BIOS boot order may include "CD-ROM" but it's not the real device anymore. I tried looking for the CD-ROM by its manufacturer name in the list under Hard Drives but it's not there either.So just how do I go about booting from the CD-ROM in AHCI mode? No problems booting if I set the BIOS back to IDE mode, install Windows 7 and then do the registry hack to install the AHCI drivers, but I'd like to be able to boot from the CD-ROM in AHCI mode.
P.S. I have a Gigabyte GA-MA78GM-US2H motherboard and am using the latest BIOS version (F9D)
a friend of mine asked me to look at his laptop the other day.It had stopped booting to windows.No OS detected, couldn't boot from HDD, still detected in the BIOS however. It's on a laptop which has 2 IDE connections so I switched the drive to the other and changed the boot order, same problem. The disk was essentially full and he was after a new one so I suggested now could be the time. Anyway the new HDD arrived today, got hold of a copy a Windows 7 and installed it, laptop now boots fine into the new copy of windows, everything is running OK but he needs data off the old HD. I thought the new OS would be able to access it but it isnt recognised in my computer. It is still recognised as the secondary drive in the BIOS and in windows drive management but cannot access it.Drive management can see it and says the device is working properly but it wont initialize, wont turn offline and any access attempt comes up as an I/O error.It has win7 and all his data on so formatting to just save the hard drive for storage isnt an option (just yet).
View 1 Replies View RelatedWhen I built this computer back in the dark ages of 2007, I set it up to dual-boot Vista and XP. Every time I powered on, I'd get a prompt to boot into Vista or "older version of Windows," meaning XP. I'd pick one and go on my merry way. In 2011, I formatted the Vista drive, installed Windows 7, and deleted the XP install since I had XP mode in 7 if I needed compatibility. No more dual-boot prompt. I had no issues until last night, when I went shopping for a new hard drive. My motherboard, a Gigabyte GA-P35-DS3L, was running an old BIOS that has problems with drives of 1 TB or more. So in order to be sure I could use the drive I'm buying, I updated the BIOS to the latest revision, using Gigabyte's @BIOS utility to do it in-OS rather than through the boot menu.
When I rebooted, the system POSTed fine. But instead of booting Windows, it gave me the old choice between Vista or the "older version of Windows" - despite neither of those operating systems being present. If I tell the boot manager to do anything, it spits out an error since it can't find any OS files it recognizes. The BIOS itself seems to be fine - I'm writing this on the affected computer, running Ubuntu with a Live CD. I can see all the hard drives, open files, etc. I just don't know how to get the boot manager pointed at Windows 7 again.
Windows 7 ultimate 32 bit suddenly switched off, reboot does not show on screen which reads "HDMI CHECK SIGNAL CABLE". Using ATI HD4350 fanless with heatsink connected via HDMI lead. tried another monitor using white dvi cable monitor stays blank then shows power saving mode. So that eliminates the monitor & hdmi lead. Could a duff graphics card show this error? No on board graphics. Unable to get into bios no bleeps, Windows 7 dvd no good either, all fans come on and motherboard MSI X58 on board indicator light goes from amber to green when pc turn on so m/b must be ok.
View 7 Replies View RelatedAs opposed to just the hard disk that the partition is on? For example, would I be able to create a small partition on my C drive then go into the BIOS and set it as my primary boot device?
View 8 Replies View RelatedIn the chaos of moving to a new house yesterday, a box my friend was moving ripped and a bottle of beer smashed onto my open and powered on laptop, scattering both liquid and glass everywhere. We immediately powered down and removed the battery, and placed the laptop upside down and mopped up the excess liquid from the outside as much as possible, and set it to dry upside down on a towel.My laptop is a Lenovo U330, I had my brother install Windows 7 on it for me last year, but he kept the disks so I don't have any of them.Several hours & some blowdrying later, we attempted to start up the laptop (I would have preferred to wait longer, but I needed to know if mine would work in case I needed to borrow my friend's for the week). The laptop will load the lenovo startup screen, and then flash the windows loadings screen (with the option to press f2 or f12) for a few seconds before recommending that I run startup repair. Which if I select it, will freeze after a few seconds. Usually my laptop's pretty noisy, but while the battery light flashes as if there is activity going on, there's no noise coming from it at all.
View 7 Replies View RelatedFirst off, Windows 7 is very cool; I might use it more than vista now that I got internet for it, but that will have to wait for a month or two. My first question is: when I boot up my comp, and I have to pick either vista or Windows 7 (I have Windows 7 on another partition), I usually leave the room while my comp is booting, so after 30 seconds the BIOS picks Windows 7 as the default OS because its first. I would really like to boot up my pc while doing something else, and I would love for the BIOS to pick Vista after 30 seconds instead of Windows 7 because I use Vista for games and such. Is there some way of doing that or do I have to sit around throughout the start up and manually pick Vista?
My second question seems a little picky or over the edge, but when I boot up my comp and have to pick an OS, it prints "Windows 7" while underneath it it prints out "Microsoft Windows Vista". Is there some way to add 'Microsoft' in front of Windows 7 when Im picking in the BIOS? It doesn't look as good without the Microsoft.
Sometime when i turn on the PC , all fans are running but nothing boot up no beep sound either. I have to push and hold on power butt to utrn it off then turn it on again couple time to get it to boot up but then it freez up in few min!I have try to boot in bios mode but get same problem it freez!!! when i try to do memories test it tell me i have hardware problem and again it ran memories test for 2 min then free
View 6 Replies View RelatedI have 3 laptops, was trying to boot from linux distro 32 bit on all of them. The oldest toshiba laptop is a 32 bit and the bootable dvd works! My 2 newer Asus laptops 64bit cant boot the dvd. All of their boot orders have also been configured. Asus even has a BBS option that can let me boot into dvd drive directly. On 1 Asus I only get a blank screen. On the other, no medium detected, cdrom boot priority indicated "boot ready".
View 7 Replies View RelatedI've built an 128gb Samsung (830 Series) SSD into my Acer RL70 Nettop. It was empty and when I tried to boot the nettop there was only the message "ERROR: No boot disk has been detected or the disk has failed". Then I connected the SSD to another computer and installed windows on it and it worked on that PC. When I put it pack into the Nettop i got the same error again. In the Bios, it shows the SSD correctly.
View 2 Replies View RelatedHall drivers/updates for my new build are complete, and when i boot, the first asus bios screen comes up, then displays components (as usual), but then goes back to the first start up bios screen. This cycle happens three times before "starting windows" comes up (i have windows 7 ultimate 64-bit). I have a OCZ vertex 3 60Gb SSD, i5 2500k, asus p8z68-v pro, corsair vengeance 8gb cl8 1600mhz ram, and to get to the windows screen takes 40 seconds. Can anyone explain why it is displaying the bios start up screen three times before 'starting windows?'
View 4 Replies View RelatedI have a Z68 AP D3 gigabyte mother board with Smart Responce capable. I have a 1 t sata HD and a 64 SSD. Trying to set up Smart Response.
Gigabyte show a simple video to make it work. But not working for me. As soon as the bios are set to xHD, my windows no longer works. It say operation system is missing. But after change back to AHCI, windows works again.
Installing Intel Smart Response also cause Windows to crash. At boot up, the intial 4 lights that forms the window logo at boot up freeze, then the death blue screen shows up. Need to repair windows again.
Tried setting bios to xHD and install new windows, but windows cannot recogize any of the HD while on xHD. Drivers for RAID found on my motherboard CD does not work either.
Tried to change cables to Sata 3 port only, also not working. Sata port 2 also not working. why cant' my system read xHD configuration? Am I missing a module or hardware?