I have recently installed Windows 7 , and can not print to my Epson Stylus photo R220.
The printer was not in the default list of printers, so I got the driver fro the Epson website ( used the Vista driver ). It appears to install correctly on port LPT1, and the printer then appears in the devices and printers window, but if I try a test print , nothing happens, If I try to print a text document I get an error message saying that the printer is not configured correctly !
Since I installed Windows 7, My Epson Stylus photo R220 shows all ink cartridges empty.
They are completely new cartridges. Also if I boot in to a different OS ( Linux ) It shows the cartridges are full! Is there a known problem with Epson ink monitors an Win 7 ?
program not recognising downloaded material. There is obviously a block somewhere not allowing access to the EPSON Print CD software, but I am unable to unblock it.
Since installing Windows7 over vista last week, my EpsonStylus Photo RX500 will not work. I followed someones advice on reinstalling it completely but that didn't work. I downloaded new drivers but when I run the printer software I get the following error message - "Epson does not recognize the OS. Epson PhotoStarter is not compatible with operating systems earlier than Windows 98. Installation was canceled."
I have no idea why it would refer to an earlier version of windows??
I'm totally lost and need help,PLEASE?
Is there anyone out there who can send me a step-by-step on how to correct this?
I have an Epson Artisan 725 which prints on CD/DVD and is network connected. Inoticed a few days ago that this device can not print 3X5 cards. In addition, it can not print on 3 hole paper. Was wondering if I was missing some setting, or if Epson has abandoned this type of format. If Epson has abandoned it, that is a real shameas 3X5 cards are the most popular index card out there.
I am trying to print a disc label on a dvd ,my printer is a Epson stylus photo Px650 .I have the software for the job but when I drag the into the software it says "this is not a epson cd print file.but I have printed dvd labels before with no problems but I can't remember if it was with XP but I am using windows 7 now .The I want to print is a jpeg is there a way to change it to an epson print file? and if so ,how do I do it?
I have an Epson Workforce 840 printer. I replaced the black ink and the cyan with refillable cartridges and reset the cartridges. Everything printed fine. Then a month later, the magenta and yellow were running low so I replaced those cartridges and reset those with the rest of the replacement set I installed earlier that included the black and cyan. I checked the print levels and all of the cartridges are showing as full, both on the printer's display as well as from my computer (I am printing from my Mac Powerbook and my kids' Windows 7 laptops). I then did a nozzle check and a print head check, and now only the black prints out. I try and print a lined/ruled paper from the printer's onboard control panel that should print in cyan and it comes out blank.
I have Windows 7 os and an Epson Stylus SX415.I can print perfectly in A4, but when I try to print a page smaller than A4 ie: A5, A6 and labels, the printed area does not fit the paper properly - it is too big.And 'shrink to fit' does not work to make it fit the page. I have tried running MS troubleshooter, updating the latest drivers, uninstalling and reinstalling software and driver.
I have three printers.1. Samsung ML-2010 (B&W)2. Epson Stylus Photo PX650. HP Color Laserjet 1600.When trying to Print a Spreadsheet from ExcelThe Samsung prints without any problem.The Epson takes Four and a Half Minutes to produce a print.The HP tells me "Current Printer is unavailable, Select another Printer"Each of the Printers will print a Windows Printer Test Page from my PC.
How can i get multiple epson artisan 50 printers to print at the same time, using windows 7 I have them all installed properly. When the second job goes to print, they all slow down then stop.
I am experiencing print quality problems which I think is coming from the computer. The printouts I am receiving are in Windows Basic Graphics format, but I would like them to be high quality. The problem seemed to occur when I was running a software facility which was set up for printing out on to templates. A message appeared on the screen saying that Windows 7 did not support this driver and would revert to Windows Basic Graphics when printing out. I have reset my computer to the factory default but this does not appear to have done anything. The printer I am using is an Epson SX125.
I have recently picked up a rather old Epson EPL-5800L, which I was unable to successfully install on a Windows 7 OS. According to the manufacturer's website, there are no Windows 7 drivers available for this printer. Hardware-wise, the printer iworks fine and has happily installed using an NT 4.0 driver under Windows XP 32-bit.I have so far tried running the available Windows 2000/NT 4.0 driver in the required compatibility mode and with full 'Admin' rights but with no luck as the OS reports that the driver is not compatibile.Looking for an alternative solution, I have tried EPL-5900, EPL-6100L and EPL-6200L drivers. Whereas ELP-5900 and EPL6200L would not even attempt to communicate with the printer, EPL-6100L results in an instant error light coming up. As there is no software control panel, I can only presume that the driver has been written for a slightly different printing processor.I have also replied to Epson asking whether the printer is PostScript enabled as there is no obvious indication in the specification sheet but got some generic instructions. A transcript of that conversation will be attached attached to this post within next couple of days.
I would like to keep my Epson Perfection 1640SU Scanner and therefore i would like to know how to install the proper driver. The Epson sites only provides an stone-old Vista 32 Bit driver. The driver installs without any message, and i even can select the Scanner in the Twain Menu in my Paint Program, but when pressing on the startbutton then comes "An error occures while trying to open the Data Source". Hardware Manager says "No Driver installed"....I'm gettin' mad... I am using Windows 7 PRO - 64Bit?
Unable to install the epson scanner driver on my windows 7 64 bit system. Apparently the problem is the windows image acquisition, how can I reload or fix this? I ran the sfc scan and it found no problems?
I wasn't quite sure where to post this so I'll put it here My mother bought a cooking ebook, in PDF format and in 7 parts. They came with a password to view which is understandable, but printing is restricted.My mum doesn't really think taking her laptop in the kitchen is a very practical method of reading it, and so naturally she asked me to try and find a way around this restriction. As I said I have the password to actually open the PDF and it was all legitimately acquired so I don't see the problem in asking a question of this nature.
I've just taken delivery of a new windows 7 PC, with i5-2500k/8gb/SSD/1TB HDD, Asus p8z68-v lx motherboard. Everything was going fine with setting up until it came to printers.I have 3 printers connected - Brother HL2030 laser, HP Photosmart D6160 and Epson Stylus photo R2400 - and NONE of them will work. All three came up with "your device is installed correctly etc etc" message. I can't print documents or even a test page. I've downloaded and installed Brother's W7 driver - zilch. HP site says you lose most of the functionality of toollbox etc but "the windows 7 default driver should work" - it doesn't. Likewise the Epson. I've tried 3 or 4 times to reinstall them all, deleting each first from the control panel, and absolutely no joy.I'm sure I must be doing something wrong but can't figure
I have an old printer (Brother 1430) attached to my new PC running windows 7 via the LPT1 port. It works well in Windows 7 but I am unable to print from XP mode.
I have installed the drivers into XP mode and it seems to be recognised by XP but no luck with printing. Have tried a USB connector but again no success.
I am an avide genealogist and use Ancestry and Find my Past as research sites, I have been using these sites for a number of years and been able to print from these sites certificates etc that I have found in my research. Of late I have experienced an anoying problem in that I cannot print these any more from the screen shot, if I save the screen as a file to a folder I am able to open the files and print from the file.
I know that both these sites use Djview as a viewer for viewing the files from their sites, but if I can view them surely I should be able to print.
I'm unable to print emails or web pages.Dialogue box shows 'the internet has stopped working' and no printing information is displayed.It then recovers the tab when the dialog box is closed. Am running IE8, However can print from library.Have tried disabling firewall and altering Internet options settings. Same with 3 different printers wired and wireless.Have tried resetting internet options.
I have installed an HP Printer and it's printing fine with the exception of MS docs. I can bring PDF files, web pages. I've printed an ebay purchase and and an Amazon purchase. However, I am unable to print Word or Works doc.
I'm using Win 7 Pro logon as user with administrative credential. I need to do printing in DOS mode. The Case is : I type Net Use LPT1: \printserverp1 in DOS mode, it displays the command completed successfuly. The connection was made when I look at it again by using net use. But when I send a command 'dir/w > lpt1 ' in dos mode, it shows access is denied. It doesn't allow me to send a print job
I have a MacBookPro with OSX 10.6.8 and a Toshiba laptop with Windows 7 to which is connected by USB a Canon MP250 printer. I have been able to network the two computers, meaning I am able to create a file on the Mac and save it on the Toshiba and vice-versa. But I am unable to print a document from the Mac on the Canon printer which is connected to the Windows laptop. I think I correctly followed instructions here.
Both printers connected to my HP desktop (win 7x64) via USB ports become inaccessible (cannot print) if the computer is left on for a day or more. When I look under Devices and Printers, it shows both printers with the troubleshooting icon (Status: needs troubleshooting). When I initiate troubleshooting, it comes back with - "troubleshooting could not identify problem." I have to reboot computer to get printers working again.
I've been trying to print from the Windows 7 XP Mode, with no success. How do I set up the Win7 XP Mode so I can print from it. I have a Laserjet 1320 printer. It prints fine from Windows 7.
Printing's been working fine up until about a week ago. Suddenly I'm unable to print out of chrome. Whenever I try to print I get an error that says "Printer not Installed" in the browser. I disable the "print preview" chrome has recently implemented but that doesn't work. I reinstall Chrome to no avail. I try to print in Firefox and get a different error... "An Error Occurred while Printing." I do some research and then realize I can't print out of Acrobat Pro. My print settings dialog in Acrobat is unlike any I've ever seen and no options work. I can't change the paper size or access the printer settings from the Acrobat Print Dialog.
Steps I've taken so far: Reinstalled the printer Restarted Print Spooler Deleted the Port Reinstalled Printer again with new drivers Successfully Printed Test Pages after each of these steps. Still could not print out of other programs. Successfully Printed out of MS Word
I logged in under a different user and was able to print out of firefox.
