I have three printers.1. Samsung ML-2010 (B&W)2. Epson Stylus Photo PX650. HP Color Laserjet 1600.When trying to Print a Spreadsheet from ExcelThe Samsung prints without any problem.The Epson takes Four and a Half Minutes to produce a print.The HP tells me "Current Printer is unavailable, Select another Printer"Each of the Printers will print a Windows Printer Test Page from my PC.
View 9 RepliesAt this point i knew exactly what had gone wrong and had a major panic attack, i thought i had lost all my precious files, which i had no backup of. Then i remembered when i first got the computer i had to burn something called Acer eRecovery manager to 3 CDs. I then loaded the CD via the Boot Menu, and from there chose to restore my system but still retain user data (rather than restore to factory settings). the 2 and a half hour procedure, i found that all of my documents had been saved. I immedietly rushed to the store and bought a external hard drive and backed up all of my documents.
Now, moving on to the problem. Well it actually a very easy problem to describe. My new computer is now 50x slower than what it used to be, and im not even exaggerating. When i first got the Computer it loaded in 20 seconds, now it takes half an hour. Before this happened, when i used to click on internet explorer it came up instantly, now when i click on it it takes a minute or so. The problem is that i literally just bought this computer, and it cost me alot of money. It worked brilliantly fast when i first got it, now after this my old laptop is even better than it.[CODE]
my Toshiba laptop takes more than 3 mins to start up even after i upgraded to 6 GB of DDR 3 RAM .. My processor is Core i3 330M 2.1 Ghz and OS win 7 64 bit.
View 8 Replies View Relatedtakes almost 5 minutes to boot up sometimes & 70 processes at once?
Toshiba Satellite Intel core 2 4 gig RAM
I'm not sure if this is the ISO (doubt it) or my hardware (more likely).
I have motherboard: Gigabyte GA-MA785GM-US2H
BIOS version F2 (updated today 12/12/2009)
CPU: AMD Athlon II X2 245
RAM: ddr2 800, 4GB (2x2GB)
Windows: 7 Ultimate 64bit
Video: GeForce 8800 GT 512MB, PCI-Expressx16 -- latest driver
from nvidia (downloaded today 12/12/2009)
Monitors: two (2) 19" Widescreen LCD. One is DVI, another is VGA+adapter=DVI.
Problem:
Win7 setup (install) -> first restart -> bios finished -> blank/black screen for 10 minutes (or so)... then win7 loads and resumes fine.
This 10-min delay happens every time win7 restarts. Note that this happens even initial setup/install, no other programs installed yet.
Previous OS: Windows XP Pro 32bit, SP2. No problem with booting.
I have tried unplugging one monitor, switching, using the onboard ... all with same result.
Can anyone help me, I'm desperate -- about to ditch win7 and go back to XP pro.
it takes 10 minutes boot window 7.
I am using Dell 15 (4G RAM, Core2Duo 2.20 GHz). Using Microsoft Window 7 Pressional (6.1.7600 16385). I have applied many security updates. I also use Window Security Essential.
I will first say I have searched the internet far and wide and have not found a solution that has worked yet. Secondly, this is a home build that is nearly a year old with no issues to this point so it's not connected to so-and-so PC supplier who released a driver update that I know of.About a week ago, my computer has decided to take its time when waking up from sleep. It is Windows 7 Professional, completely updated with no problems to that point. When it falls asleep and I wake it up, the machine starts up and is active, but my monitors, external hard drive, and other peripherals are never turned on as they once were and the machine just sits there running with a black screen. After exactly 1 minute and 50 seconds, the hard drive, monitors, mouse, keyboard light up and I'm good to go. It was about 10 seconds prior to whatever it is that happened. I have tried turning off hybrid sleep. I have tried using hibernation instead of sleep. Same error. I found online where someone said they had this problem with an ATI card, but once they upgraded the Catalyst Control Center and drivers, they had no problems. That did no good. The only update I've done recently is Firefox, but I have not seen any other reports of the newest Firefox causing sleep problems. I read where someone had a problem with waking up from sleep mode because of Firefox's memory leaks and they said closing Firefox before putting it to sleep helped.I upgraded to SP1 after that and it didn't correct anything.It does not matter if I put it to sleep and wake it up immediately or if it goes to sleep and when I get home from work, boot it up. The same thing happens no matter the length of time.
I have a dual boot with Ubuntu, but that has been on there for months with no errors and Ubuntu will sleep and wake up just fine, usually; sleep has never worked correctly for it. There have been no hardware changes or any hardware driver changes other than the video card. I tried rolling back video card drivers to see if there was a difference with no change. My ASRock MB has the most up to date BIOS that has been out for over a year. My video card is a 5770, but like I said, I've tried older and new drivers. I tried the prevx black screen fix with no luck. I saw the Windows hotfix for this problem, but no where did they provide a link to this hotfix so I'm assuming it was downloaded in an update at some point so it is doing no good for me.
I have been using my pc lately and iv been getting the driver power stat failure alot lately and what happens is my internet goes out and when I shut down it takes at least 5 minutes until it goes BSOD and the error message appears can some one help me with this and tell me how to fix it as soon as possible because this has been going on for a while and I want it to stop.
View 1 Replies View RelatedI recently installed a WD 15k Raptor hard drive and my computer now takes about 7 minutes to boot up, it gets stuck at the starting screen, where no hard drive action will happen, then 7-8 minutes later there will be loads of activity then will start up, ive tried narrowing it down, by removing the old hard drive (because im using the other old hard drive that had the OS on for media) and just running the new one, but no luck, I also tried reinstalling Windows 7 Ultimate 64bit on my old hard drive, which had no problems before, but the same effect, takes 7-8 minutes to boot. Ive even tried removing any new hardware I installed before it, but still the same problem, Ive asked a lot of people and Ive had various solutions, but no effect, I think its to do with the power supply, or the SATA cable and power addapter I purchased for the new hard drive. Ive also tried booting in safe mode, and it still takes the same time to boot.Computer spec:Processor: i7 870RAM: 8GBGPU: AMD Radeon HD6870HDD: WD 15k 300GB Raptor HDD, WD 5400 1TB HDDPSU: 500W
View 14 Replies View RelatedAFter windows finally boots up, everything works fine except IE v9 that also takes forever to load a page and strangely, most of the dropdown menu items are grayed out. I have uninstalled and reinstalled but the same symptoms occur. I have reset to defaults and the long load time still occurs. If I try to maximize the IE window, it hangs and never frees. Also, if I try to enter a new url in a separate tab, IE freezes and never releases and takes a while to close.
This is on Win 7 Home Premium, SP1 64-bit with IE 9.
I used to have windows xp on my pc and recently i upgraded the memory of it into 6GB RAM. I decided to install windows 7 64bit. After that point my pc is slow as hell! Booting in windows takes around 4mins. general performance of pc is very low after installing win 7. I have updating drivers through windows and everything seems updated.
PC:
Intel i7 920 @ 2,67 GHz
6GB ram
ATI R5850
i have windows 7 os .and its working in domain .i loggin with user so it takes 10 to 15 minutes but in administrator its working fine.
View 2 Replies View RelatedMy computer does not run smoothly, and I cannot figure out why. My computer takes upwards of five minutes to reboot, with several minutes on the "Windows is Shutting Down" screen and several minutes on the initial boot. The delay even includes starting the computer in Safe Mode.Additionally, I am having tremendous amounts of graphical problems while running any game I have on my machine, including Rig N' Roll, Nascar 2003, Max Payne, and Skyrim (even on the lowest settings). Random discolored shapes will appear and stretch throughout the screen. Black lines show up and the graphics are so unbearable that I cannot play any games functionally. For example, when going through the very beginning of Skyrim, the screen would turn almost completely white and stayed that way until I exited to desktop.
The graphical problems are not only in games, as even browsing on the internet can cause random thin horizontal black lines to appear across the screen. The lines remain even if I shut off my monitor and turn it on again, so the monitor does not appear to be the problem.I have run full scans in safe mode of Malwarebytes and Symantec Endpoint Protection Antivirus, with no detections of virus, spyware or malware. I don't know what else to do.I have the most recent (as of today) Windows updates with the exception of one. The update of KB 911895: Other Hardware - HID Non-User Input Data Filter, refuses to update.
OS: Windows 7 Enterprise 64-bit.Motherboard: XFX Nforce 680i SliProcessor: Intel Core 2 Quad CPU Q6600 @ 2.40ghzRam: 4 gbGraphics: NVIDIA GeForce 7900 GS 2gb card, with driver urrently updated after running drive sweeper and installing the latest driverAudio:
Just recently purchased a new computer. i7 2600k CPU, GTX550 Ti graphics card and 32GB RAM. I'm using Windows 7 64 bit Pro and am booting from an SSD. I have an audio interface connected via USB2 port on boot up. I've seen videos online where it can take about 25 seconds to boot win 7 with SSD but I am getting no where near that.
View 11 Replies View Relatedwhy windows 7 takes more than 30 minutes to shut down
View 5 Replies View RelatedMy computer was superfast until it started giving problems. It literally takes 30 minutes to start up and it freezes every 2 minutes. The Windows Experience Index showed a rating of 7.9 for the processor but now it only shows 4.9. The pc is quite new, I bought it 19 months ago.
Here are the specifications:
Motherboard - Intel Desktop Boards DH67BL Media Series
Processor - Intel CORE i5
Hard drive - Western Digital 500GB
RAM - 2 � Kingston DIMM 2GB DDR3 (4GB)
OS - Windows 7 Ultimate 32-bit
How can I fix my pc or at least stop it from freezing.
I have a relatively new Windows 7 enterprise 64-bit install. This is a domain account, so I have to do ctrl+alt+del to login. After entering my password, the welcome notice comes up (with the spinning circle), and it takes quite a while for the desktop to appear. It can be as long as a couple of minutes. This is a pretty fast rig (i5 2500K/GA-Z68X-UD3H/F312800CL8D-8GBXM) and when I first set it up it, my desktop appeared about 10 seconds after hitting the power button, including login.
Is the use of the domain account the likely cause of the delay, or could this be something else like automatic update? I'm not sure how I would go about finding out.
My Windows 7 takes nearly 3-4 mins during shutdown,?
View 2 Replies View RelatedMy wife has a Compaq PC, bought 3 months ago, with an AMD Sempron 2.7 Ghz and 2.00 GB of ram. Windows 7 takes a full 4 minutes to boot. I've disabled all non-essential external devices, and completely reinstalled Windows 7. Still has the same problem.
View 11 Replies View RelatedMy Dell W/64 computer has become very slow - Takes nearly 6 minutes to boot fully, with CPU running at top all that time. There are some 950 locked files that have shown up, and even when computer has been going for 30 minutes or more nearly everything is sluggish.
System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: AMD Athlon(tm) Processor 2650e, AMD64 Family 15 Model 127 Stepping 2
Processor Count: 1
RAM: 3838 Mb
Graphics Card: ATI Radeon HD 3200 Graphics, 256 Mb
Hard Drives: C: Total - 694104 MB, Free - 586678 MB;
Motherboard: Dell Inc., 03D1TV
Antivirus: AVG Internet Security 2012, Updated and Enabled
- Windows 7 Pro in a workplace.When a unser logs to a machine for the first time, it takes around 3 minutes to create the profile, it hangs at "Preparing your desktop". After the initial logon, the time is more normal, around 10-25 seconds.What could cause such a long delay to initiate the profile?
View 6 Replies View RelatedToshiba Satellite M645-S4065 (LAPTOP)
CPU: Intel Core i3 M370 2.40GHz dual-core
RAM: 4GB
System type: 64-bit
1) When I restart, my computer stays stuck at the "Shutting Down..." screen for 15 minutes. I then get a BSOD, then it restarts, I get the prompt to start up as safe mode, etc., and then I'm back to the main screen. The BSOD reads: driver_power_state_failure
2) Connecting to the internet, whether by my phone's hotspot or ethernet cord is really problematic, especially by cord. It often hangs and I have to restart the computer or wait a really long time. The taskbar icon hangs with the spinning Aero circle perpetually. And attempting to open the networking controls just freezes.
program not recognising downloaded material. There is obviously a block somewhere not allowing access to the EPSON Print CD software, but I am unable to unblock it.
View 3 Replies View RelatedSince installing Windows7 over vista last week, my EpsonStylus Photo RX500 will not work.
I followed someones advice on reinstalling it completely but that didn't work. I downloaded new drivers but when I run the printer software I get the following error message - "Epson does not recognize the OS. Epson PhotoStarter is not compatible with operating systems earlier than Windows 98. Installation was canceled."
I have no idea why it would refer to an earlier version of windows??
I'm totally lost and need help,PLEASE?
Is there anyone out there who can send me a step-by-step on how to correct this?
I have re-installed my printer 4 times, it takes forever to load anything that needs printed......even the programs.All other programs open quickly and work as always. I have an epson artisan 700 that when you open any program to print with, just takes forever.......I have spent a whole day trying on my own, to no avail.I have even did 2 earlier restore points, which were successful? I am at my wits end, cannot wait 5-8 minutes to print out just 1 page.
View 2 Replies View RelatedI have an HP desktop with an Asus MB #M2N68-AM SE2.Sometimes it boots normally but lately it may be as long as 10 to 15 minutes to get past the Windows l7 flashing logo.
View 5 Replies View RelatedSo I still have Windows 7 Ultimate Beta and going to buy Professional soon. But something weird is going on.
I have Thunderbird which checks all my email addresses at startup but it says "cannot connect" so i started to check out my wireless. My wireless says it has "limited access" to my network, says it is "not connected" and when I check the wireless status, it would say that it isn't connected to the IPv4 and IPv6, all while being connected for "00:01:30+"
Then after several minutes, it would just start identifying and connect to the network/internet real fast out of nowhere. My wireless is a Intel(R) PRO/Wireless 3945ABG network connection
Also, I have a VMware to run Ubuntu which bridges the internet to go online, if this helps. (I cannot uninstall since it took me 4 weeks to get it running)
I got a sony vaio windows 7 64bit home premium. The problem is, pc too slow to start up. It takes about 15 to 20 mins or more.. and it's always have "not responding" in the upper left corner of the monitor.. I can't use my ms word to do some typing job co'z its pauses 5secs every time.
View 5 Replies View RelatedI have an Epson Artisan 725 which prints on CD/DVD and is network connected. Inoticed a few days ago that this device can not print 3X5 cards. In addition, it can not print on 3 hole paper. Was wondering if I was missing some setting, or if Epson has abandoned this type of format. If Epson has abandoned it, that is a real shameas 3X5 cards are the most popular index card out there.
View 4 Replies View RelatedI have recently installed Windows 7 , and can not print to my Epson Stylus photo R220.
The printer was not in the default list of printers, so I got the driver fro the Epson website ( used the Vista driver ). It appears to install correctly on port LPT1, and the printer then appears in the devices and printers window, but if I try a test print , nothing happens, If I try to print a text document I get an error message saying that the printer is not configured correctly !
Any ideas ?
I am trying to print a disc label on a dvd ,my printer is a Epson stylus photo Px650 .I have the software for the job but when I drag the into the software it says "this is not a epson cd print file.but I have printed dvd labels before with no problems but I can't remember if it was with XP but I am using windows 7 now .The I want to print is a jpeg is there a way to change it to an epson print file? and if so ,how do I do it?
View 4 Replies View Related