I'm trying to plug a USB camera into the back of my computer, but the computer won't acknowledge that I plugged it in. I don't get an error message or anything, it simply doesn't seem to notice anything. (I've tried it with a flash drive, too—same deal.)
I'm not missing drivers for the device itself, as I've plugged them both into other ports and they work fine. It seems that the port itself is the problem. I just reinstalled Windows yesterday after getting infected with a System Fix virus, so that may have something to do with it.
EDIT: It may have something to do with my BIOS, as I changed my boot order for the reinstall. I'm not aware of anything else being changed, but it's possible.
I recently installed 2 new disks, put windows (7) on it and kept the old hdd as a back up, and to just be able to get to my old files should it be necessary. However the question is this: Id love to just move all my games from my old disk to my new one, but I'd need the old registry values. Are they anywhere physically on the old disk? Obviously I can't acces them by regedit, so is there a way to import (parts) of it Or do I have to disconnect the new drives, boot on the old disk and copy what I need?
somebody has ripped off the superbar for windows xp except that in xp it's fully transparent and i think it looks better. is there anything to make the ACTUAL superbar in seven fully transparent?
I was trying to uninstall a print driver for a network printer for one of my users (Windows 7), and I ran into that issue where it tells you that it can't remove the drivers because they are still in use (this after stopped and restarting the spooler, rebooting, etc.). So I was looking at the "File Repository" for this print driver (C:WindowsSystem32DriverStoreFileRepositoryhpcu115u.inf_amd64_neutral_4a9d334b04ff58b2), and it has the same files as another folder that is pointed to under the "Driver" tab in the Print Server Properties dialogue (C:Windowssystem32spoolDRIVERSx643). My questions are the following:
1. What is the purpose of the File Repository folder as compared to the driver folder as listed above?
2. If I am unable to remove the print drivers through Print Management (using admin rights), should I manually delete the corresponding File Repository folder, should I delete the files in the corresponding folder as listed above (C:Windowssystem32spoolDRIVERSx643), neither, or both?
3. Why in the world does it give that message, even after having deleted that printer? Is it a matter of other users on that machine being mapped to that same network printer, or what?
I did check to make sure there are no other services started that use the printer driver.
I was trying to uninstall a print driver for a network printer for one of my users (Windows 7), and I ran into that issue where it tells you that it can't remove the drivers because they are still in use (this after stopped and restarting the spooler, rebooting, etc.). So I was looking at the "File Repository" for this print driver (C:WindowsSystem32DriverStoreFileRepositoryhpcu115u.inf_amd64_neutral_4a9d334b04ff58b2), and it has the same files as another folder that is pointed to under the "Driver" tab in the Print Server Properties dialogue (C:Windowssystem32spoolDRIVERSx643). My questions are the following:
1. What is the purpose of the File Repository folder as compared to the driver folder as listed above?
2. If I am unable to remove the print drivers through Print Management (using admin rights), should I manually delete the corresponding File Repository folder, should I delete the files in the corresponding folder as listed above (C:Windowssystem32spoolDRIVERSx643), neither, or both?
3. Why in the world does it give that message, even after having deleted that printer? Is it a matter of other users on that machine being mapped to that same network printer, or what?
i am new here to seven forums, not sure if this is the right thread i should be asking in, but never know till i try. Anyhow, I am playing a game called Aion, and my Ping in that game is around 70~100Ms.I use Verizon fios, 25/25 speed plan, a MI424WR Router, that was provided, and a wired connection.*Also i do not have any FPS Lag, i am getting 50-60 frames.*And i have leatrix latency fix installed, version 3.00
I am trying to modify the attributes of a file (in this case the album title for a group of MP3 files in 1 folder).All I want to do is change one character.W7 (home premium 32bit) blanks out the whole box, and I have to type the all of the text again.
I have recently upgraded to windows 7 pro on a nice new 1TB hard drive. I have removed the previously installed win xp drive, and that is now in an external caddy. I have been in the process of moving the files from the xp drive to the Windows 7 drive. I forgot to backup my IE8 bookmarks before the switch over, and have tried to find the actual bookmark links via windows explorer but can't find them. I have tried looking in dos and setting users favourites...but the bookmarks are not in there.
I recently installed new software that requires port 8080 to function. When I try to run the software I get an error that port 8080 is being used.How do I check to see what process is using port 8080 so that I can open up the port to run the software? MACHINE: Windows 7x64
Quite spontaneously and for no apparent reason, I can no longer copy/paste a simple "add contents of 2 cells" to empty cells (e.g. e3+d4, to the next cells down the column, etc.). No matter what I do it will only copy the actual contents i.e. the result of the previous calculation. What I have tried:-
1. Deleting all contents and formats from the range of cells and starting over; 2. Using the drop-down menu of the paste button to select the "paste-special / formula" option (which keeps jumping back to the first default option at the top of the list); 3. Running the Office diagnostics built-in software off the microsoft top-left button to detect faults and anomalies - Nothing works and I am at a loss.......most peculiar...........
I just bought a new computer from a computer shop. It is custom built and has the following:Has 8GB RAM, 3.3ghz intel core i5-2500k, windows 7, Intel HD graphics so upto 1.7GB max video memory, 1 VGA slot, 1 DVI slot.Just to confirm I checked in person and my tower has a VGA port and a DVI-D dual link port.
my 2 no usb port and lan port are not working other wise other 1 no usb port working this is new laptop i think driver not installed because when i connect the pendrive there was light showing in my pendrive.so i want drivr
When I save files from programs (aka Word, Photoshop, anything)onto my Desktop, I cannot see them directly from the actual desktop. I can only see them when I open up Explorer, and click on the Desktop tab. Then all my files are visible. I thought they were hidden...but they apparently aren't.It possibly seems like a refresh error.I did find a way around this..I go to Control Panel >> Appearance and Personalization >> Under Folder Options >> Show Hidden Files and Folders. I click on Reset folders, Apply, and then OK, and my missing files pop up on my actual desktop.But from then on, any new files I save are only visible in Explorer again. I don't want to go to Control Panel everytime I have to save something to the desktop? I've run Norton and Microsoft Essentials and I have no viruses. What can I do?I just found out I can also see my files after pressing f5 (refresh)so I guess the problem is HOW do I get my computer to refresh the desktop automatically?
my operating system is windows7 and i have this sata hdd and it is not detected by the os well it used to work with the os earlier but it wasnt detected by the system recently. then i tried to reinstall the os after that it did but after a two or three reboots it went missing again... at the time it got detected the system was booting very slowly,.. My hdd is not detecting by os
Ok, I have run out of ideas on this..My setup is Windows 7 64, P35 chipset, 4g ddr2,Evga 8600GT dual dvi with dvi to vga converter s-video out, Q6600, 160g pata hdd and a Gateway EV700 (17").
I cannot get Windows 7 to show the desktop, or detect the monitor. I have an LCD TV hooked to the S-video connector and that is the only way I can see the desktop.
The main monitor will show everything up to the point of showing the desktop..that is where the mon goes blank and I have to look at the TV.
Someone suggested I try XP driver for the monitor, but it will not install and just gives a dialog saying that winxp and above already has the drivers nessesary.
I have tried the Windows 7 64 drivers from MS update, Nvidia, and EVGA (both Windows 7 and Vista 64 drivers).
I have tried both monitor outputs. nothing.
I have a KVM which was not an issue for XP, but I am not sure about Windows 7.
Taking out the KVM is my last resort, as I am running out of ideas.
I also tried using an old Diamond Stealth PCI card to no avail....It wouldn't even post with it.
If I had a VGA to S-video converter, I would try that, but for now, I am stuck trying to use Windows 7 on a tv screen that is only 12".
At 1024x768 it's not much fun trying to read anything on it.
I forgot to add that the Nvidia ctrl panel does not show multi display menu.
Recently i upgraded win XP to win 7 with a format and fresh install. Though after the install, Win 7 did not pick up my onboard sound card or my usb modem. I have the drivers for them but how can i install them if Win 7 wont pick them up? they dont appear in the device manager at all. Win XP had no problem at all with this. Is it possible that they hardware is to old to be recognised by windows 7? i dont have the XP software to switch back so hopefully ill be able to fix this with assistance.
My brother was trying to restore his friends laptop and during the process the power got disconnected and the C Drive got wiped--I believe. I decided to fix it I would do a fresh install of Windows 7.
Everything was going great and I got the recovery disk to install, but my problem was the Hard drive wasn't showing up as unallocated disk space. The drive did show up, but not as any free space. I tried to do some tutorials in diskpart to fix the drive, but to no avail.
Now, I can't even get windows, or BIOS to detect the drive. The last diskpart command I did was to reformat it. It wasn't the quick reformat, but the one that takes an extremely long time. That's when I noticed it wasn't detecting anymore.
Here's some pics of what I'm seeing:
imgur: the simple image sharer imgur: the simple image sharer imgur: the simple image sharer
I unstalled my AMD filter usb driver, rebooted and now none of my usb work..I can't log into the computer via usb reason being when i boot up to the login screen i can't type or use my mouse cause the driver for the usb' have been unstalled. i can use them in bios. When it boots to the login screen i can't use anything iv tried plugging in all of the usb's but it doesn't work.
I gave my pen drive to my friend she used it in internet cafe but it doesn't working from that day.it is not showing in my pc when i insert into my laptop
I've lost all my usb drivers and windows will not connect or recognize any usb device when I install it. Here's the message I get from device manager:Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39). I've tried everything possible to correct the situation even reloading the intel chipset from Asus web site. Windows no longer will detect a flash drive or external usb drive. I'm at the end of my rope and I don't envy the thoughts of a reinstall. Is there a way to reinstall the usb drivers?Any one can point me in a direction.
I have a Diamond ATI HD 5670 graphics card installed, and when ever I try to connect my Toshiba LCD HDTV 40E220U to the computer it comes back saying "No Video Signal", I tried what the manual said for the HDTV. But it still wont recognize my HDTV, what should I do?
I run a Nvidia GTX 275 Works flawlessly even if i use both ports on the back to use dual monitors.
If however i plug my Nvidia 8800GT in the second PCI-E x16 Slot the computer only recognizes the 8800GT which is in the second port and there is no GTX 275 showing in the Device Manager or Boot Menu.
So basically i plug in my second video card and my primary card just vanishes from the computer like its not even there.
Has anyone got an idea what could be the cause of this?
I have checked the drivers and its the same drivers at the moment for the 8800GT and the GTX 275.
I want to be able to run my 19" Widescreen Monitor on my GTX 275 and use my 8800GT Card for my tiny 15" Screen so i can play Games on my Primary card and be able to have Website open and viewable all the same.
(I'm not trying to run SLi as i know you need 2 of the same GPU and your motherboard needs to be able to support it, I don't like SLi so its all good so far.)
When I was running windows vista, I could display my laptop on my TV with no issues. After installing windows 7, the TV does not detect any input. I tried pressing Fn F8, and windows P and the laptop says its switching dispays but the TV does not react. I just updated my NVidia drivers. Any ideas?
I don't know what happen, but im having problems with my external hard drive. I have 3 partition in it, but only the first one is detecting, the other two doesn't appear at all then a sign pops up saying i have to format it, i hit cancel and all 3 drives disappear. seems like hard drive failure. I have a lot of important data on the other drives, is there any way to recover it myself? I really don't want to pay 500+ dollars to recover the data off the drive.
one day i was playing mafia ii and all of the sudden everything stops my desktop was empty error message everywhere my pc couldnt find my hard drive . i used sistem restore now every picture and all my music is gone
I no longer can stream media from my PC to my PS3. It used to work a couple of months ago and it still works with my dads computer. Both mine and my dads PC are windows 7. I've compared the settings between the two PC's and could see no difference. I've tried several different media server programs including vuze, ps3 media server and windows media player and none of them work.
I've made sure all the media streaming and advanced sharing settings are correct and the proper services are started and temporarily disabled windows firewall. As far as I can see its an underlining issue and not one on the surface.
I am using a Linksys WRT160nv2, I recently clean installed windows 7 on my Vista desktop. I thought it would be my NIC having problems so I installed a linksys WMP600N. It worked for a while until I updated everything and restarted now it won't work again.