Samsung Ml 2240 Printer Drivers
I have windows 7 and i've downloaded latest drivers for Samsung ml2240 printer. When I start to install, I got error "the arguments are invalid". How to fix this?
View Replies (Posted: 1 Week Ago)
Sponsored Links:
Related Forum Messages for Windows 7:
Samsung Ml-2510 Printer Driver
I have a Samsung ML-2510 that I recently purchased and I can not get it to work with Windows 7. I have tried the xp driver and the Vista driver running in vista compatibility mode as an administrator and have had no success. The reason I bought this printer was because my older hp deskjet 3745 would not work with Windows 7 and it had no vista driver so I ran it in compatibility mode and it also did not work. Both these printers work fine in xp mode. I would like help with the samsung primarily but also with the hp.
Posted: Tuesday, August 11, 2009 1:27 AM
View 6 Replies!
View Related
Samsung Laser Printer - ML-1740
I really like Windows 7 so far. MUCH more stable than Vista on my HP Laptop. Everything has worked thus far with the exception of my Samsung Laser Printer installation. Upon running the setup, I get an error stating that this version of Windows is not supported. Any suggestions would be appreciated.
Posted: Friday, January 16, 2009 6:53 PM
View 10 Replies!
View Related
Samsung ML-2510 Printer Problem
I tried searching this before couldn't find a thread with the issue I have... 1) Windows 7 64bit has a Samsung ML-2510 USB printer installed 2) I shared the printer in Windows 7 3) x64 drivers are installed but could not installed x86 drivers. It keeps saying the driver is not for the processor architecture (using the driver I used for WinXp) 4) In Advanced Sharing Options, I enabled Sharing and disabled password. I only have one account with no password, on Win 7 Machine. 5) Windows Xp laptop is a work machine and part of a domain, so I can NOT change the workgroup to "Workgroup" 6) Tried installing the printer using Win7MachineSamsung command in Winxp run dialog 7) Printer windows opens up showing "Initializing" and then get 'ready' 8) NOTHING happens when I try to print a test page. Is there a way I can use the printer? I used to be able to print without any problem, when I was on XP.
Posted: 11-29-2009
View 6 Replies!
View Related
Samsung SCX Printer Problem
I have Samsung SCX 4x21F mono laser printer and i can't install it and put it to work i get this message when i trie to add printer Windows can't open Add Printer. The local print Spooler service is not running. Please restart the spooler or restart the machine.
Posted: Thursday, January 29, 2009 12:28 AM
View 2 Replies!
View Related
Printer Samsung ML2251N Connection Problem
Printer Samsung ML2251N connected to a router D-link DIR-655 (ethernet) does not work. Windows 7 x64. Vista from the same PC works with it. Symptoms: - Does not print when setting a local ip address - Cannot connect via http://192.168.0.199 address (works under Vista) Error: The server at 192.168.0.199 is taking too long to respond - Strange ping message: Pinging 192.168.0.199 with 32 bytes of data: Reply from 192.168.0.198: Destination host unreachable. Reply from 192.168.0.198: Destination host unreachable. Reply from 192.168.0.198: Destination host unreachable. Reply from 192.168.0.198: Destination host unreachable. Ping statistics for 192.168.0.199: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Microsoft suggests, though for Windows XP: http://support.microsoft.com/default.aspx/kb/314067 This error message means that no local or remote route exists for a destination host at the sending host or at a router. Troubleshoot the local host or the router's routing table. Tried: Change router settings (dynamic/static ip of the printer) Turn firewall off (public and private networks, Windows 7)
Posted: Monday, February 02, 2009 7:12 AM
View 2 Replies!
View Related
Networking Printer Samsung Clx 3170
It was compatible with windows vista ultimate as a network printer but now. I lost the printer  I manually over rode the installer for the drivers and set it up to be compatible with vista, and I have nothing...still  I am running the 64 bit edition with the 64 bit edition drivers...Â
Posted: Tuesday, January 27, 2009 3:10 AM
View 1 Replies!
View Related
Samsung ML-1510 700 Laser Printer
Thought it might be of interest for anyone else with this 5 year old printer to know that on my system it works with XP drivers (downloaded from the Samsung site) but NOT Vista drivers. Right-click on the driver file, select Troubleshoot Compatibility, and follow the instructions.
Posted: 03-04-2009
View 3 Replies!
View Related
How To Update Printer Driver ? (Samsung CLP-300)
Can someone for the life of me please explain how i go about updating the driver as the default one seems to print graphics realy badly, compared to what the printer is capable off. I have tried going to device manager, its not listed or im pretty sure its not. i have tried going to the printer propertives through the Printer and Devices window, no update driver option there?
Posted: 09-06-2009
View 6 Replies!
View Related
Samsung Clp 315 Color Laser Printer Does Not Work
I just bought the printer cited above, at first i could not install the 64 driver but i went to windows update and it gave me an update (driver?) for the printer, But after a reboot i lost the driver and re-installed with success the vista 64 driver from the Samsung site, but after puting the pc to sleep when re-starting i loose the driver every time. I called Samsung but of course they won't help me with windows 7 I am thinking of bringing it back as i have 30 days and bye another brand but they are double the price of Samsung. Anybody would know of any solution please, it would be apreciated. I cannot install the diagnostic program also that comes with the printer but this is miner if i can get the driver to stay.
Posted: Saturday, March 14, 2009 7:16 PM
View 4 Replies!
View Related
Samsung 275t Drivers
My current monitor driver default by Windows 7 is generic pnp monitor. with this i cant get my refresh rates higher. i downloaded the samsung drivers from their site, but when running the file i get "cannot open monitor driver, please check the monitor driver or cd" ive tried runnning it in compatibility mode as well. im on x64
Posted: 05-02-2009
View 4 Replies!
View Related
Samsung R60 Drivers
I was wondering if Samsung have released drivers for the R60 laptop that are fully functional in Windows 7, when I installed Windows 7 I had to search for all of the drivers myself, I was given a disk with the laptop but it only works in Vista. When running a benchmark test, the graphics were much better in Vista because I dont think I can find the right driver for the graphics card in Windows 7. Also, a lot of the Fn buttons dont work anymore, for example changing the brightness, turning off the display, showing the battery level on screen, etc. I assume this is done through the chipset driver which I never had to install or even looked for. Also, one last thing, with my graphics card on Vista I get a little ATI icon in the notification area, along with the Catalyst Control Centre, although I never get this in Windows 7.
Posted: 11-15-2009
View 1 Replies!
View Related
Samsung I760 Drivers
I have install the drivers for (Samsung i760) but I think, that they are only for XP, Vista, I get not massage from computer as to if drivers are OK or not (they show in "Divice Manager" I open Windows Mobile Center and my phone said is not conected. Any sugestions as to how to?
Posted: Wednesday, January 28, 2009 12:16 AM
View 7 Replies!
View Related
Samsung J600 Drivers Are Failed To Be Seen
I was on the Samsungs offical site to get USB drivers for my mobile so my Windows 7 (Build 7201) could see my phone and I would bea ble to get photos off it and all that. I did have the program of running it at first, but I did run the installation in compatability mode to bypass this error. And it isntalled perfectly, but despite it being installed properly my mobile still isn't found. Infact Windows sees my mobile as "CUSTT13 Development Platform" instead of Samsung or how ever it is normally seen. Is there anyway to fix this USB driver issue so I'm capable of connecting my mobile to my PC without any problems.
Posted: 06-14-2009
View 0 Replies!
View Related
Samsung Gravity 64bit Drivers
Alright, I honestly don't know where else to put this/look for answers as google doesn't help. I just received my new Phone, the Samsung Gravity (sgh-t456) I believe sgh-t459 for people in the states, and I'm trying to get it my pc to recognize it via usb. The CD that came with it can't install, it gives me all kinds of errors.. The samsung website is impossible to navigate and I can't find their support forums (even if they do exist..) My OS is Windows 7 RC1 64bit.. and uh.. That's all I can think of from the top of my head. If you need more info, ask and I'll be glad to help you help me.
Posted: 09-11-2009
View 2 Replies!
View Related
Samsung Dvd-rom SD-616F Drivers
when the installation stars automatically, after select idiom & country, the setup program ask for driver for the dvd device, I´ve selected the folder in c:windows/system32/drivers because the actual windows xp works perfect with the dvd device, but the installation program can´t find the driver, i´ve also downloaded the driver for the specific device and still nothing. my device is a Samsung dvd-rom SD-616F
Posted: Monday, August 10, 2009 3:32 PM
View 5 Replies!
View Related
Samsung BlackJack II Drivers Will Not Install Properly
Alright so, I just got a new computer yesterday and it just so happened to have Windows 7 64-Bit on it. I am a new user, that in a few days has switched from XP to 7. I own a Samsung BlackJack II, which I have done countless modifications to, and now, I cannot seem to sync it up, let alone, connect it to my computer. When I plug it in, via USB. It worked the first time, synced it and everything with Windows Mobile Device Center, but then when I unplugged and replugged it in, driver's were corrupt(obviously), and tried uninstalling it all, and then reinstalling them all, drivers and WMDC, and I get a little notification that informs me that the drivers were unsuccessfully installed. Which is no longer making any sense to me... At all! lol, so I was wandering could you guys help me out here? I'm new to Windows 7 and I hope that this Community, gives me a lot of insight, and information to get back on my feet.
Posted: 2 Weeks Ago
View 4 Replies!
View Related
64 Bit Drivers For Samsung Scx-4521f
I have a shared SCX-4521f printer that I'd like to print to from a Win7 64bit workstation. I've tried the Vista and XP drivers - both 64 and 32 bit and I'm not allowed to install either. I've also tried the universal samsung print driver to no avail.
Posted: 09-16-2009 at 02:56:12 PM
View 6 Replies!
View Related
Samsung R710 Fn Function Drivers - Backlight Problem
Ive got a samsung R710 Laptop and windows 7 works great, but the vista drivers for the FN functions dont work correctly and im unable to change the backlight dimmness using the keys or using the operating system settings. I wondered if anyone else had found anymore drivers? Theres nothing on the samsung website.
Posted: 11-01-2009
View 5 Replies!
View Related
32-bit Printer Drivers
I have an HP OfficeJet 5610. Both printer and scanner work perfectly on my main computer with 64-bit Windows 7, but when I try to print something from my dad's laptop (XP 32-bit) it gives me "unknown error"-type messages. I found out that I need to install the 32-bit drivers on Windows 7, but where do I find them? I never installed anything in the first place; the normal 64-bit drivers came with the OS. My Windows CD has both versions, so it must have the 32-bit drivers for my printer... but where?
Posted: 10-21-2009
View 1 Replies!
View Related
|
TRACKER
