Samsung ML-2510 Printer Problem
I tried searching this before couldn't find a thread with the issue I have...
1) Windows 7 64bit has a Samsung ML-2510 USB printer installed
2) I shared the printer in Windows 7
3) x64 drivers are installed but could not installed x86 drivers. It keeps saying the driver is not for the processor architecture (using the driver I used for WinXp)
4) In Advanced Sharing Options, I enabled Sharing and disabled password. I only have one account with no password, on Win 7 Machine.
5) Windows Xp laptop is a work machine and part of a domain, so I can NOT change the workgroup to "Workgroup"
6) Tried installing the printer using Win7MachineSamsung command in Winxp run dialog
7) Printer windows opens up showing "Initializing" and then get 'ready'
8) NOTHING happens when I try to print a test page.
Is there a way I can use the printer? I used to be able to print without any problem, when I was on XP.
View Replies (Posted: 11-29-2009)
Sponsored Links:
Related Forum Messages for Windows 7:
Samsung Ml-2510 Printer Driver
I have a Samsung ML-2510 that I recently purchased and I can not get it to work with Windows 7. I have tried the xp driver and the Vista driver running in vista compatibility mode as an administrator and have had no success. The reason I bought this printer was because my older hp deskjet 3745 would not work with Windows 7 and it had no vista driver so I ran it in compatibility mode and it also did not work. Both these printers work fine in xp mode. I would like help with the samsung primarily but also with the hp.
Posted: Tuesday, August 11, 2009 1:27 AM
View 6 Replies!
View Related
Samsung Laser Printer - ML-1740
I really like Windows 7 so far. MUCH more stable than Vista on my HP Laptop. Everything has worked thus far with the exception of my Samsung Laser Printer installation. Upon running the setup, I get an error stating that this version of Windows is not supported. Any suggestions would be appreciated.
Posted: Friday, January 16, 2009 6:53 PM
View 10 Replies!
View Related
Samsung SCX Printer Problem
I have Samsung SCX 4x21F mono laser printer and i can't install it and put it to work i get this message when i trie to add printer Windows can't open Add Printer. The local print Spooler service is not running. Please restart the spooler or restart the machine.
Posted: Thursday, January 29, 2009 12:28 AM
View 2 Replies!
View Related
Printer Samsung ML2251N Connection Problem
Printer Samsung ML2251N connected to a router D-link DIR-655 (ethernet) does not work. Windows 7 x64. Vista from the same PC works with it. Symptoms: - Does not print when setting a local ip address - Cannot connect via http://192.168.0.199 address (works under Vista) Error: The server at 192.168.0.199 is taking too long to respond - Strange ping message: Pinging 192.168.0.199 with 32 bytes of data: Reply from 192.168.0.198: Destination host unreachable. Reply from 192.168.0.198: Destination host unreachable. Reply from 192.168.0.198: Destination host unreachable. Reply from 192.168.0.198: Destination host unreachable. Ping statistics for 192.168.0.199: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Microsoft suggests, though for Windows XP: http://support.microsoft.com/default.aspx/kb/314067 This error message means that no local or remote route exists for a destination host at the sending host or at a router. Troubleshoot the local host or the router's routing table. Tried: Change router settings (dynamic/static ip of the printer) Turn firewall off (public and private networks, Windows 7)
Posted: Monday, February 02, 2009 7:12 AM
View 2 Replies!
View Related
Networking Printer Samsung Clx 3170
It was compatible with windows vista ultimate as a network printer but now. I lost the printer  I manually over rode the installer for the drivers and set it up to be compatible with vista, and I have nothing...still  I am running the 64 bit edition with the 64 bit edition drivers...Â
Posted: Tuesday, January 27, 2009 3:10 AM
View 1 Replies!
View Related
Samsung ML-1510 700 Laser Printer
Thought it might be of interest for anyone else with this 5 year old printer to know that on my system it works with XP drivers (downloaded from the Samsung site) but NOT Vista drivers. Right-click on the driver file, select Troubleshoot Compatibility, and follow the instructions.
Posted: 03-04-2009
View 3 Replies!
View Related
How To Update Printer Driver ? (Samsung CLP-300)
Can someone for the life of me please explain how i go about updating the driver as the default one seems to print graphics realy badly, compared to what the printer is capable off. I have tried going to device manager, its not listed or im pretty sure its not. i have tried going to the printer propertives through the Printer and Devices window, no update driver option there?
Posted: 09-06-2009
View 6 Replies!
View Related
Samsung Clp 315 Color Laser Printer Does Not Work
I just bought the printer cited above, at first i could not install the 64 driver but i went to windows update and it gave me an update (driver?) for the printer, But after a reboot i lost the driver and re-installed with success the vista 64 driver from the Samsung site, but after puting the pc to sleep when re-starting i loose the driver every time. I called Samsung but of course they won't help me with windows 7 I am thinking of bringing it back as i have 30 days and bye another brand but they are double the price of Samsung. Anybody would know of any solution please, it would be apreciated. I cannot install the diagnostic program also that comes with the printer but this is miner if i can get the driver to stay.
Posted: Saturday, March 14, 2009 7:16 PM
View 4 Replies!
View Related
HP PSC 2510 All In One
SPECS: - Windows 7 RC - build 7100 Ultimate x64 - HP PSC 2510 All-In-One ISSUE: Windows 7 does not have an out-of-the-box driver for the HP PSC 2510. Windows 7 does have a generic driver for the 1500/1600 series (which works with the PSC 2510) but only supports basic printing and does not support Scanning & Faxing capabilities of the PSC 2510 device. The official HP PSC 2510 driver + printer tools download (Vista x64 - almost 500MB) do NOT install on Windows 7 RC, even in Vista /SP1/SP2 compatibility mode. RESULT: Only basic printing functionality of the HP PSC 2510 is available on Windows 7 RC. All advanced scanning and faxing capabilities are lost on Windows 7 RC. REQUEST: Please provide out-of-the-box support for the HP PSC 2510 All-In-One printer, including printing, scanning and faxing.
Posted: Wednesday, June 03, 2009 1:30 PM
View 18 Replies!
View Related
HP AiO 2510 Scanner Driver
HP AiO 2510 scanner driver, No way to get my scanner visble, Where is a good driver. I have tried driver XP and Vista. Printer was found rapidly, however, no scanner found.
Posted: Friday, September 18, 2009 7:29 PM
View 6 Replies!
View Related
Samsung TV Not Supported
I upgraded from Windows Vista to Windows 7 in my HP Pavilion dv2415NR the screen on the laptop works fine when I tried to send the video to my Samsung 40 TV I get a message on my TV that the "mode not Supported". The Samsung work under Vista. Any suggestions of how I can get to work. I tried downloading the new driver from NVIDIA.], that did not solve the problem.
Posted: Monday, January 11, 2010 12:21 AM
View 2 Replies!
View Related
DLNA Samsung TV
I have a Samsung LN40A750 TV and apparently for the "A" versions you can no longer get the linkstick. I ordered a "B" version of the linkstick but it didn't work (it said it wouldn't but I figured I'd try it anyway). In the end I settled on purchasing a Linksys WET610N Wireless bridge. That worked as the TV has an IP address and I can use WiseLink to see the content being shared from the computers on my network. The PLAYTO feature in Windows is what really want to work with this lashup but the TV is not recognized by Windows 7 as a device.  Any thoughts on how to get the TV to be recognized as a device while connected to the bridge? Is this something provided by the linkstick for this TV? BTW, it does identify the WET610N wireless bridge as a device in Windows. I have a Samsung Omnia 2 phone. It too is DLNA compliant and I can PLAYTO that device.
Posted: Saturday, January 09, 2010 11:11 PM
View 8 Replies!
View Related
Network Printer - HP LaserJet 4100 Printer Driver Issue
I have successfully installed a HP network printer on two W7 64 bit clients that I have running in a test environment. There is one other HP network printer that is giving me problems. It is a Laserjet 4100 N model. I got the 64 bit Vista universal driver off the HP website. Add a Printer Network Printer Select HP4100 from the list of available printers. .. Looking for Driver  " No Driver Found" Browse to folder where drivers were extracted to. OK then error "Windows cannot locate a suitable driver" Any suggestions? I used the same procedure for another laserjet printer from HP. That particular driver was device specific and it worked like a charm.
Posted: Monday, May 04, 2009 3:55 PM
View 8 Replies!
View Related
Samsung Monitor Driver
I've had an ongoing problem with this for some time now. You can see here that my Device Manager tells me that I'm missing a video controller, and also in that post is my inability to watch full screen videos online. Here, I talk about the problems I've had with my display driver crashing. Now, yesterday I downloaded Photoshop, and as it opened, a window popped up saying that my "monitor Profile" is defective and needs to be calibrated (See first attachment). If I choose to Ignore Profile, I can use Photoshop as usual, but everything I export has an irremovable yellow tinge. If I choose to Use Anyway, there is no white in Photoshop's color pallet, only the same yellowish color. This got me thinking for the first time that my monitor was the cause of my problems, so I searched online for Samsung 2243swx drivers. On their webpage, they had up for download only one driver, which is for a VGA graphics card (See second attachment). I've been running a PCI graphics card (NVIDIA GeForce 8400 GS), and I was wondering if this could be the problem. Would you say I ought to buy a VGA graphics card?
Posted: 11-28-2009
View 9 Replies!
View Related
Samsung USB Driver
i have a samsung Tocco mobile phone and samsung don't have any windows 7 friendly drivers for it. does anyone know if there is a 3rd party driver i can use to get it working with the samsung studio?
Posted: 10-24-2009
View 3 Replies!
View Related
Samsung 275t Drivers
My current monitor driver default by Windows 7 is generic pnp monitor. with this i cant get my refresh rates higher. i downloaded the samsung drivers from their site, but when running the file i get "cannot open monitor driver, please check the monitor driver or cd" ive tried runnning it in compatibility mode as well. im on x64
Posted: 05-02-2009
View 4 Replies!
View Related
Samsung R60 Drivers
I was wondering if Samsung have released drivers for the R60 laptop that are fully functional in Windows 7, when I installed Windows 7 I had to search for all of the drivers myself, I was given a disk with the laptop but it only works in Vista. When running a benchmark test, the graphics were much better in Vista because I dont think I can find the right driver for the graphics card in Windows 7. Also, a lot of the Fn buttons dont work anymore, for example changing the brightness, turning off the display, showing the battery level on screen, etc. I assume this is done through the chipset driver which I never had to install or even looked for. Also, one last thing, with my graphics card on Vista I get a little ATI icon in the notification area, along with the Catalyst Control Centre, although I never get this in Windows 7.
Posted: 11-15-2009
View 1 Replies!
View Related
Samsung I760 Drivers
I have install the drivers for (Samsung i760) but I think, that they are only for XP, Vista, I get not massage from computer as to if drivers are OK or not (they show in "Divice Manager" I open Windows Mobile Center and my phone said is not conected. Any sugestions as to how to?
Posted: Wednesday, January 28, 2009 12:16 AM
View 7 Replies!
View Related
|
TRACKER
