troubleshoot slow startup for spss v18 (or pasw as its known now). It works great connecting to a network license when i set it up initially using admin account outside of a domain. But as soon as i sysprepped the pc and join a windows domain and login as any user (whether they have admin rights or not), spss v18 (pasw) takes about 5-6 minutes to load - which is not at all acceptable. In fact there is no splash screen or anything to warn users it is loading, and just appears after several minutes...I've checked domain firewall settings (even disabled firewall), but still no joy.However, once spss has loaded after several minutes, any other users logging in afterwards get a quick spss load. Its almost like the first login on the PC from cold takes forever, any reason for that?Again this only happens when the PC is in a domain and being sysprepped with spss on it.
My son's laptop is really slow loading Windows. If I go into Safe Mode, it comes up really quickly and the internet works - all normal. But in the regular Windows, it takes forever and the internet does not connect (it might if I left it long enough but I haven't had the patience). I did an AntiMalware scan which showed nothing and am currently running an Antivirus - both in Safe Mode. I was going to do a System Restore but only one is showing on the system and I wasn't sure where to go with it.
I just got a new computer that I built: i5 2500k, MSIP67 G43, 8GB RAM, 2 6850s in CF, Corsair 750w PS. I'm running Windows 7 Ultimate 64bit.It was working fine yesterday but sometime this morning it started hanging up. Basically what happens is the username screen comes on, I click the user, then it makes the little chime.I can see the recycle bin, I can access the start menu but I can't do anything after that. My network connection icon in the task bar freezes for about 3-4 minutes.During that time I'm unable to open any program until it connects. After that, everything works fine.All I've installed today was a windows update, an updated driver for my Networking card, and GWFL client. I was overclocking my CPU also, but since I'm troubleshooting this, I rolled it back to the default settings.I've uninstalled GFWL, and I've rolled back to the previous drivers and it still does this.
why after i install a clean copy of windows 7 in my laptop Packard bell easynote nj65 my cd/dvd-rom is too slow to load, when i insert a disk in a optical drives my laptop is too slow to load a file,movie, software anykind of a file in disk before appear on screen there is some solution to make speed up my cd/dvd-rom?
I am completely stumped as to why videos tend to lag & freeze my screen for 10 second intervals, aswell as cause my browser to freeze with a busy icon. I've tried everything I know to do with no progress. I've tried numerous different browsers with no luck, scanning for all bugs.as well as disabling firewalls, cycling my router/modem & making sure all of my drivers are up to date. My computer should handle everything just fine.
I have an HP Pavillion P6000 with Windows 7 Home Edition and I use Webroot Spy Sweeper weekly. I've never had any problems and suddenly last week while trying to get on IE, my home page would act like it was loading but it was just a white screen that disappeared about 10 seconds later. I tried rebooting and couldn't get windows to load after that. I tried "Repair My Computer" which told me no problems were found. Rebooted and couldn't get windows to load again. Found your website and used the F8 key, tried "Startup Repair", didn't help. Tried "Stsyem Restore" and while windows was able to come up, still couldn't use IE ans still can't open any programs. Now it's doing the same thing with windows not loading and it won't let me try to restore again. I get this message, "An unspecified error occurred during System Restore. (0x800700b7). I tried using a different restore point also. I don't know much about computers
just installed two new Windows 7 computers with Windows 7 Professional 64-bit.When opening Internet Explorer the home page displays instantly but then if i try and visit other pages (even something as simple as Google) the pages take an age to display.I thought it might have just been the connection but if i try the same pages on a Windows XP machine or on my Mac, they display a lot quicker.
-i7 2600k CPU -32GB RAM -ASUS Maximus IV Extreme Motherboard etc. -Windows 7 Pro
I have 5 hard drives installed. 3 for storing sound sample libraries, 1 SSD for the OS, and a spare 2TB hdd to install any other programs I need and for general storage.Most times when I try to open Sonar X1 (software for music production) it takes about a minute to load. I know it's not the power of the computer holding it back because it has, although rarely, loaded up straight away. Does anybody know why this might be happening? I've installed Sonar X1 on the spare 2TB hdd.On a possibly related note,some mp3's on the 2TB hdd play for a while and then stop, only to continue playing about a minute later. Driving me nuts.
basically I just got a new computer, and would like to transfer my minesweeper records from my old computer to my new one. Both are running the same Windows 7 x64. The reason I want to transfer is because I became RIDICULOUSLY good with my old laptop, and will never come close with my new one (different mouse styles). I mostly played easy, but I became damn good at it. I had a 95% win rate over 10,000 games, which is ridiculous considering the number of no-win games. I also had my top 5 times at under 2 seconds, with an extremely rare one-click win top time of 0 (shows up as 1) seconds.
My best friend inadvertently reset my statistics for Spider Solitaire; I don't have a perfect score but have played a great many games. I know what the statistics were as of last week, and would like to restore them. In Windows XP, I could edit the Registry, but do not know whether this will work in Windows 7.
I'm moving from an XP machine to a Windows 7 machine and have transferred my project files (engraving files as well as .bmp). When I try to open a project folder in any of the programs I use it takes 2-3 minutes for it to load all the filesThere are just over 10,000 files in the folder, they are all small files (nothing larger than 100k), and on the XP machine it loads in an instant.I have done everything I can find online (turned off indexing, changed the folder prefs, etc) and nothing works. When I open the folder within Windows it loads in an instant, however when I try to open it within a program is when it dragsDoes anybody have any ideas of what else I can try outside of threatening the computer with physical violence?Also as you can tell by my screen name I'm a mac user that has to use PCs at work.
I have installed windows 7 on my computer about a year ago. I've never had any problems to the point where I would need to reinstall the OS, however, I've noticed that on cold boots the system runs painfully slow, it will boot up fairly fast on a normal restart tho, like 20-35 seconds. On a cold boot it can take about 1-2 minutes to load in windows, and then once that happens its not so much it going slow as that there is a point during which I cannot click anything or else it will take forever to accomplish.
What I mean by this is, it will load to my desktop and for a period of about 3 more minutes I will try to right click on the desktop and it will do the circle thing for like 20 seconds before giving me the drop down menu. If I right click again right after, it shows up instantly. Same with trying to open up a file within those first couple of minutes. It will take like 45 seconds to open a picture. I have tweaked my windows 7 to startup only necessary drivers and turned off search index along with Aero.
My HDD isn't fragmented and I've got about 120gbs out of 450 available. So its not that bad. Now some of you may say, well its just loading the processes. But I only have catalyst control center loading up as a startup item. And even after it loads. It goes through a wierd 3-4 minute phase in which everything is slow as hell. Then works perfectly fine.
recently i have a problem with my laptop, when restarting it loads normally but after a second desktop load something i dont know caused the desktop unclickable and the loading animation circle is still spinning, after about 2-3 minute it finished and my laptop works well as usual again (no slow), i wonder what makes that happen, sometimes its very annoying when we want to use the laptop immediately after restarting or turning on
One particular site that is not loading at all, on any browsers on my computer is [URL]. There are many more that fail to load as well. I did test these sites on my iPhone with no problems though. There are a handful of other sites that do open but do not load properly [missing images, ect.] I also thought that it might be malware but I installed & scanned my computer with four different programs which did not solve the problem. I'm guessing that it still may be some problem on the software side with settings but I can't seem to figure out where to look. BTW, I've been using Microsoft Security Essentials as my antivirus program for the past couple of days now. Prior to that I was using Avira but it seemed to be giving me problems so I uninstalled it and installed the Microsoft app.
During a recent windows update my pc froze, (mid-update) and I restarted my machine. Now windows gets stuck at the black" Loading operating system..."screen. After a long wait it will eventually display boot from cd/. When I boot from my windows dvd my os is not shown in system recovery. I Have also tried running start up repair from recovery with no luck.
I bought this Fujitsu laptop for less than a year. Its only for my school work. It takes forever to bootup, startup and it sometime hangs when I open up a program or typing.For the bootup, it takes very long time on the window logo, after that the black screen, followed by the welcome page with the loading cursor. Each of this process take a long time. For startup, its not so long but its still quite lag. For the opening up of program and typing, everytime I open up my visual studio, it will take a long time to show up and even if it showed up, it will be "not responding".So I will have to open it a second time before I can start using itWhen I am typing my codes, it will randomly hang and show that the program is not responding. I am still able to move my cursor though.
Until yesterday I had two different versions of Windows installed on two different hard drives, one on C: and one on E:. Yesterday I decided to remove the one on E: and started using CCleaner to just wipe the drive clean. I stopped in the middle and decided to format the disk instead because it was going to take a few hours using CCleaner's wipe. But by then Windows was having trouble with that drive and although it was detected, I couldn't format it or do anything to it for that matter.So I downloaded a copy of Natty and running it from the disk, I was going to try formatting it from there, but it was not detecting that drive. Fine. I understand there is a way to mount the drive and I just have to figure that out.
i have a big problem my window is not able to load properly after window 7 log my pc gets hang and nothing can be done 1st i thought it can be because of corrupted window so i tried to install new window that's window 8 but new setup is also getting hang what to do guys?and good thing is that window 7 is working fine in safe mode but its not working in normal mode in any case nor in normal window or in normal setup mode
recently I had a virus so I did a recovery to an old start date, now I have no desktop. Windows 7 loads up, I put in my password and then I get a blue screen..through CTRL+ALT+DEL I can get to the internet (works fine) and also my Computer drives. However nothing loads on my desktop. I have tried to run Explorer.exe..
Acer All In One computer with IE 8 and Windows 7. Some web sites load fine but others don't come up. Tried Firefox and no difference. Had similar issue with previous computer and used Windows Transfer to move evrything off that to new Acer. Seems to be getting worse. Use Qwest DSL hard connection. Can VPN to work ccomputer and bring up the web sites that won't load locally. Have tries variuos scans and nothing is found. For instance can get into US Bank site and Vanguard, but not Tax Act or Fidelity.
Problem: Internet Explorer 9 and also Firefox 5 do not load web images. Strangely though, Google Chrome seems to work. Attached you will find some screen captures. I think both were done before the browsers were updated. So far, I've updated the browsers to the newest version, and updated java to 6.26.
Strange thing has started happening, i have upgraded to 100MBb broadband and i am connected via Ethernet and speed test showing average 94mb. yet random web pages links i click in Google open in an new window but the page will not load, never happened before when i was on 50mb, i have run anti virus and spybot which found maybe 1 or 2 things but it has not resolved the issue,
a week ago the IE stopped loading pages, i have also firefox installed which is working fine. googled the problem and show a suggestion to reset the IE (tools - internet options - advanced - reset). but this option was in grey. i tried tune up utilities to fix the win but it didn't heventually i removed the IE9 (control panel - programs and features...). the problem was solved or so i thought. the problem came back again in the next time i run ie8. i tried to re install IE9 but the problem was till there. i removed again the IE9 and again i thought the problem solved but it came back in the next time i run ie8.
