My wife's laptop (Dell Inspiron 1525) with Mobile Intel 965 Express chipset family, have a problem to configure the correct resolution for LCD TV (Samsung LN32R81BX/XBG) with 1366x768 resolution. The laptop have installed a Windows 7 x64 Professional. When the LCD TV is connected with HDMI port is not possible to configure the 1366x768 resolution only can configure 4:3 resolution. I have update all drivers but for LCD TV does not exist driver. I am looking for a manual resolution configuration. In Windows XP and earlier that configuration was possible but in Windows 7 I do not found it.exist? or another solution?
Last night my new laptop arrived (XPS), still getting used to windows 7 etc... but i thought i would watch something through my t.v. Plugged HDMI cable in back of laptop straight in to t.v, changed the source and straight away i had a lovely sharpe picture of my deskop instantly.... or so i thought
im getting the middle part of my screen fine - but it is cropped so i cant see the tool bar (its too low) and the desktop icons are only veiwable if i move them closer in screen! Ideally i want to have identical screens on both so i can use both at sam time, but currently i can only view either or atm? and the t.v one being crop means i can use it as a computer (No toolbar etc..)
I could figure this out on XP but windows 7 seems beyond me atm!
My laptop is several years old and I haven't had the need, until now, to use the HDMI port. I plugged a Kodak video camera into the port and the camera is supposed to come on automatically and begin the download of software to use with the camera. This doesn't happen and I get no error message.
I have two HP Pavillion 9700US 17" series laptops and either of the HDMI ports have audio. Can the sound card be changed if that is where the issue is.
Sony notebook with HD AMD6630 M. HDMI port not giving signal to TV. When I rollback the Intel Gaphics driver the HDMI signal comes alive but then goes dead after reboot. I have been trying to solve this for 2 weeks without success.
I am currently on windows 7 with a ati radeon hd 3600 graphics/audio card. When I plug it in to my home theatre through HDMI there is only a 2.0 sound configuration, there is no 5.1. My home theatre is a sony ht-sf470. It is 3 months old and it is capable of dts-hd 5.1. How can I configure the HDMI to 5.1.
Currently having a lot of trouble to even get any sound out of stereo mix. I'm wanting to record sound from my PC but I'm not too sure if I can with the current set up I have. I'm using my Samsung TV which is plugged into the HDMI port on my PC and using the speakers already in/on the TV. I've went to the properties of stereo mix changed the "playback through this device" to my TV and I don't get any sound coming from Stereo mix on any program and the green bars aren't going up and down either.
I recorded premium channel movies on a Dell Inspiron n5110 laptop. I used a SiliconDust HD Home Rum CableCard tuner. The movies play fine on the laptop screen. When I plug in into the TV via it's HDMI port, it does not play back the premium channels recordings. This is the message. "Display Driver Error - The video playback device does not support playback of protected content."
Yesterday, I bought a 10m HDMI cable and I plug it from my TV to my CPU. Everything was fine. The only thing was one of the games which requires Port COM1 and COM2 could not access.
I tried disabling the HDMI sound and it worked. Is there any way to change the COM port for the HDMI sound? I tried going settings on Windows and could not find any.
I just need the sound because it's a music game, from the Arcade. Everything was perfect before plugging my computer to the HDMI.
Quote: M:MiCmd: NodeAcs Task Start M:MiCmd: BoudRate : 57600, ByteSize : 8, Parity : 0, StopBit : 0 M:MiCmd: COM Port 2 Open Error M:MiCmd: Port 2 : Error 3 Node 2, step 1 M:MiCmd: MicomMain End W:net: ctrl: sz_buf(4) < 8 M:xrpc: module_add: 0: game.get M:xrpc: module_add: 1: game.active Port
I have an xfx radeon hd 6790. I am using the hdmi port and the display port for two tvs and I am using the vga (I think its called the vga) port it sez right on the box that it supports 3 monitors. I can switch between any two that I want but I cant get all three to work at the same time. I try to use all three at the same time I get "to extend the display another display must be disabled".
how can i have 1366x768 resolution via the ordinary pc vga cable i have an hdmi port in the tv and the graphics card but the problem is i have an xbox 360 which is connected to the only HDMI port in the TV so the xbox is connected via hdmi and the pc is connected via VGA i have a samsung La22B350F2 TV?
So I was having some audio problems with my computer so I figured updating the drivers would be the best bet. I decided I'd use one of those programs that can check your driver and download the driver you need. I followed the instructions and installed what seems to be called AmdEHCI onto my computer. Now whenever I turn on my HDTV which I have connected via the HDMI on my ATI Raedon 6950 the audio claims that it is not connected. Now every time I want audio to come out of my HDMI I have to disable to display and then re-enable it. I used to be able to turn my TV on and off whenever I wanted and I would still have audio functioning properly.Something that caught my attention was that when I left the properties window opened for the HDMI audio and then turned on my TV I would get a message that says "The device you are configuring has been removed." even though I haven't touched anything other than the power button on my TV to turn it on.
I have a Zotac 570 gtx connected via HDMI cable to my Asus VE258 LED monitor.I've had this video card and monitor setup working before with the exact cable, card and monitor.Something changed in my system where the monitor is no longer recognized for what it is. When i go into my Nvidia control panel under change resolution 1.Digital Display, 2. DVI-PC Display - Resolution 1080p 59 Hz. There is no DVI cable plugged into the computer and the monitor is set on HDMI input. When i go to my Audio playback devices, the HDMI connection does not show up at all, even as disabled or disconnected.When i go to play a game (Diablo 3, Skyrim, Farcry2) The game either doesn't open (skyrim) giving me the error that resolution is not recognized (but then does not give me any resolutions to choose from in the options menu) or will play (Diablo 3) but is stuck on extremely low resolutions with only 2 options.
Here's what i've done. Contacted Zotac and had them send me the most recent drivers for the video card. Uninstalled originals and re-installed the new ones. Contacted Asus (they say its not the monitor as long as its set on HDMI input) I am unable to find a driver that will make my computer (Windows 7) recognize the monitor for what it is. Zotac failed after their attempt with the driver and told me to RMA the card. So i did... i waited a month.
I am running windows seven with an AMD Athlon X2 4850e 2.5GHz card and have a flat panel television setup via hdmi and a stereo receiver/ speakers through the sound card out. I'd like sound to come out of both hdmi and the sound port that way I can here music through the stereo but when I watch standard television programs I can here through the television and turn off the receiver. the only way I've found to control the sound is to set hdmi or sound card to default in the control panel>sound. so switching back and forth is a big pain.
I have connected my hdmi cable as usual but this time i had on tv display NO SIGNAL. When i connect another pc to check the cable it seems to work correctly.The problem is coming from my pc.
I'm trying to hook up my TV with my computer, and for the most part it's working. The video goes through and I get how to control it and everything. The only thing not working is the sound.
I'm using an HDMI to HDMI cable, and like I said the video is fine. Also, when the cable is plugged into my boyfriend's laptop, the sound comes out of the TV.
So this must mean the problem is with my computer specifically. Although, this computer is only a month old, so I wouldn't think anything is out of date.
I recently installed new software that requires port 8080 to function. When I try to run the software I get an error that port 8080 is being used.How do I check to see what process is using port 8080 so that I can open up the port to run the software? MACHINE: Windows 7x64
banging my head with this issue...i have an ati radeon hd 5850 and samsung syncmaster 2233SW monitor....in the games the resolution being displayed is very low, somewhere in the 1280 x 1024 type of regions...though in the game settings its showing 1920 x 1080 .rivers are latest...11.12 amd vision engine control centerbtw my desktop resolution iv put at 1280 x 800 ...wen i put it at 1920 x 1080 in the desktop d sides of the screen get cut...evn my monitors auto adjustment function doesn
I just bought a new computer from a computer shop. It is custom built and has the following:Has 8GB RAM, 3.3ghz intel core i5-2500k, windows 7, Intel HD graphics so upto 1.7GB max video memory, 1 VGA slot, 1 DVI slot.Just to confirm I checked in person and my tower has a VGA port and a DVI-D dual link port.
my 2 no usb port and lan port are not working other wise other 1 no usb port working this is new laptop i think driver not installed because when i connect the pendrive there was light showing in my pendrive.so i want drivr
I'm having trouble with my very new computer (Lenovo Y480 with Windows 7 Home Premium 64 bit), which I've narrowed down to the following sequence:
1. I restored computer to original factory settings (to rule out possible causes)
2. I ran msconfig, and checked the boxes 'Safe Mode' and 'Networking.' I got the following error message:"System configuration cannot save the original boot configuration for later restoration. Boot changes will be reverted. The system cannot find the file specified"
3. The default boot option disappeared from the boot menu (Windows 7, default OS, current OS).
4. When I restarted my computer, it would not boot and gave me the error 0xc00034, stating that the file BootBCD was missing.
I did not do anything else with my computer after restoring the factory settings, and I did not connect to the internet. I originally encountered the problem when I wanted to try installing Windows updates in safe mode after some of the installations failed. I have replicated the error several times, including after successfully installing all Windows updates.
I have Dell Optiplex GX260 system. I intalled Windows 7 Ultimate on that. The resolution of screen is fine but it is not supporting 1280 x 1024 resolution and videos are not playing properly. It was not taking audio drivers as well but when I ran the SoundMax drivers for XP in compatibility mode they were installed. But display drivers are not getting installed. I even tried the various driver from Nvidia for XP/Vista/Win 7, but none of them works.
he has a Dell Inspiron laptop Window 7 and a Samsung LED TV. I'm on port HDMI2 on the TV from the PC. I have tried everything but it says "source is not connected..." I tested the cable with the blue ray player and it works fine. I called Dell (still under warranty) an they were useless.I've checked the settings on the PC and I have it set to "extended" so I can see the monitor on both....no luck. Is it a setting on the TV that I am missing?
my blue ray only has one video out option -- (HDMI). My T.V. has 2 HDMI ports currently in use, and 1 unoccupied VGA (15-pin) connector port. What are my option(s) to connect if I want to use the VGA (15-pin). How do I know if the T.V. (3 year old 42" Sylvania) will accept using this port from the HDMI on my blue ray?
ok well i spent about 3 hrs and i know its not my router and its the os and i did a fresh install too im on 7600 rtm, now i got windows firewall and defender disabled, i got nod32 antivirus not with a firewall just the anti, now i got utorrent, so i use utorrents port checker, the port works for it but if i add a port to my portforwarding on my router it dont work, according to this port scanner, now if i enter it and use it as my port in utorrent it works! but anything else doesnt i dont get it i got windows firewall disabled and all that i literally think theres a hidden firewall or a virus but i know there isnt a virus i also did a scan incase so any ideas?
I literally cant press the "change settings" button in windows 7, (im using windows 7 RC), its dull and theres nothing i can do, trying to connect to spore if your wondering.
