Removing Partition From Win 7 Pro 64 Bit
Feb 6, 2010Removing partition from win 7 Pro 64 bit. Is it possible to run win 7 pro 64 without any HD partitions?
View 11 RepliesRemoving partition from win 7 Pro 64 bit. Is it possible to run win 7 pro 64 without any HD partitions?
View 11 RepliesI do an annual windows reinstall from an iso I made of the windows boot CD when I bought windows 7. I made the iso because it's easier to keep track of files rather than CDs, and whenever I would need to reinstall I would burn the iso to a disc, install from the disc, and throw out the disc once the install was complete. Well tonight I ran out of CDs with a large enough capacity to hold the iso, so I decided to get a bit fancy.
I mounted the iso and ran the setup utility through windows, and had it install a new partition of windows to one of my unused storage drives. The install went well, I restarted, and saw that there was an option to boot from two partitions of windows 7. I eventually figured out which one was the new one, and once desktop loaded up I went into msconfig and removed the old partition from the boot tab.
The problem pops up when I went back to reformat the old partition. It gave me an error stating that it cannot format a system drive. I figure that this is because the old partition is still active somehow even though I removed it from the msconfig boot menu.
Through a bit of googling I got a general idea of what had to be done, so I went into disk management and set the new partition to 'active'. I then restarted and went into BIOS, and switched the disk boot order so that the new partition came before the old partition. My bios did not like this, because it gave me an error about NTLDR missing. So it almost appears that the NTLDR thing isn't on the new partition, but that's just a guesstimation.
Other information:
- Old partition is "disk 0" in disk management
- New partition is "disk 1" in disk management
- I cannot modify or delete any of the system files on the old partition when I'm booted in the new partition.
Just want to run something by you guys before I install my compy of Windows 7 Ultimate on my laptop.
I have a Fujitsu-Siemens Amilo Xi 2250 with Vista Home Premium. When I got the laptop I created the restore DVD:s (3) and have since then used them a couple of times.
From what I've gathered reading trough this and other forums, and from my own knowledge and experience it should be safe to remove the recovery partition from the HD right? Or could I run in to some kind of problem if I'd like to go back to Vista using my recovery DVD:s and the partition is not there? As I understand it if I for example had a Dell it whould be ok, but could it be different on my computer? Or do these recovery-partitions always work the same way?
Also, if I decide to leave the partition there and I do a clean install of Windows 7 will this do anything to the restore partition? Cause in that case I could just leave it there right?
I currently have Windows 7 installed on a two partitioned hard drive. One partition has all the system files and such while the other is not in use. If I remove the partition that I'm not using to free up space will Windows on the other partition be deleted?
Also, would anyone have a recommendation on a good free partitioning software?
I was using dual boot (Windows 7 + vista)
wanted to remain only with win 7
formatted vista partition (don't know how I succeeded eventually...)
now, win 7 boots fine
but I still have the vista partition which is empty, except for BOOT FILES ON IT!!!! (win 7 partition does NOT have boot files or bootmgr).
when entering disk management, I cannot delete old vista partition (marked as system) but I really want to what should I do?
I am running Windows 7 all great and haven't had any problems, I want to make Windows 7 my sole operating system and remove my XP partition. I managed to install Windows 7 on a separate partition with no problems but just wondering if it's all fine to go ahead and delete my XP partition and then resize my Windows 7 partition back up, this wouldn't create any problems?
Just a matter of backing up all the essentials first, just in case?
I've got a laptop with a partition on the main drive that holds some of the programs that came with the laptop (fingerprint reader, webcam software, etc.), but it's a 28 gig partition, and it's only using 2. I was wondering how I would go about removing the partition, but keeping the programs on the it. Will it work if I just copy-paste them over to the main drive and delete the partition? This is probably a stupid question, but I figure it's better to ask and know than guess and mess something up. There's also a folder in the partition called drivers, so my guess would be the aforementioned copy-paste technique won't work.
View 1 Replies View RelatedI should know the answer to this question but my mind isn't working. I have done this before but can't remember how *exactly* I did it.
I took my sister's 150GB HD and set her up with a dual boot with Windows 7 and XP. She now wants me to take Windows 7 off and just use XP for a while. If I use a 3rd party partitioning tool to remove the Windows 7 partition FROM WITHIN XP, will this screw up the boot manager? I think it should be fine. Just take out the partition and extend the XP partition into the free space and it should just boot to XP. Is this correct?
I install Windows 7 64 bit in a 60 gb partition of my HDD (C drive). I have about 200 GB free space in D drive. Now I want to make a 60 GB partition from the free space of D drive.
View 4 Replies View RelatedI created a 20gb partition on my external hard drive and no longer require the partition. It is currently unallocated space so I want to format it into NFTS. Using computer management the partition was selected and and I went through the steps to format but i keep on getting an error message saying there is not enough space on the disk to complete this operation.
View 1 Replies View RelatedI'm a long-time reader but new poster. I am currently running Windows 7. I want to install Windows XP onto another disc and have a dual-boot setup. I keep Windows 7 up to date and secure, but for the XP partition, I would rather not have antivirus running or even installed, in order to limit background processes. I will not be logging into any place or making any credit card purchases when booted into Windows XP. It will just be used for surfing, games, etc. Further, if and when XP becomes compromised or buggy, I will simply overwrite the partition with a backup image.
If I use Bitlocker to lock down the Windows 7 partition (with the encryption key on a thumb drive) and boot into Windows XP, am I correct in thinking the XP installation see or can't access the Windows 7 partition? If XP gets compromised, can a virus access or write to the Windows 7 partition?
Is there any other reason why this would not be secure? Can a virus write to the BIOS?
I wanted to create a new partition to try out linux. So I decided to shrink E: by 20 GB. I then formatted the free space into a new drive by right clicking and creating new simple volume. I was warned that the drive would be made "simple", but not knowing the implications, I went ahead with the procedure. Now on rebooting, windows won't load. I had made a repair disc, so was able to use it to check for any start up errors. It reported none. Moreover I used "diskpart" through cmd to find volume c: is dynamic.
View 1 Replies View RelatedI had my friend Dell Laptop. He want me to create a two extra partitions in existing primary partition which is C:The HDD is 1TB in size.One hour ago I had used Dell data backup program and created recovery discs and then formatted the Laptop to factory default. I thought before formatting it will give me options to create a partitions but it did not had any option.
View 6 Replies View RelatedWhen I installed Windows 7 on to my new laptop I think I did it on to the wrong partition as there is still a 30GB freedos one.Can I merge it with the partition Windows 7 is installed onto as it is getting full?I don't want to have to reinstall Windows again.
View 4 Replies View RelatedI'm using Compaq Presario CQ40-627TUMy Laptop SpecIntel Dual Core Processor T4400 (2.2GHz, 80Mhz FSB,1 MB L2 Cache)- 2048MB 800MHz DDR2 Memory- 320GB 7200rpm Hard Disk Drive- 14.1' TFT WXGA High-Definition widescreen LCD panel with brightviewtechnologynd i'm using windows 7 Ultimate on boot system partition C, dual boot with linux mint. which mean i got four partition. one for linux mint. one for its swap space. one for windows 7. one for my data storage(movies,drivers,mp3,picture and etc).last few days i try to resize my C partition (120gb) to make it smaller to gain some unallocated spaces and resize the D partition because my D (almost 100gb) (ntfs/primary/data storage) almost full. i use easeus partition master v5.01.
After done resizing and restart i can't see any D partition. so i was worried that my data will disappeared. i try to look for it but there is no Drive D even on the easeus or diskpart. the only drive appears was C Drive.i remove my Linux Mint and its swap (60gb) and thinking that i could get some more free space and do some cmd prompt windows 7 repair fixmbr thing to remove the grub. then i use partition recovery to transfer those missing data from partition D to C Drive. (appears as unformatted)i try to use partition wizard home to resize it back to 300gb. and it works. but i cant make a partition. it will disappear just like that.i also try to use diskpart,command prompt diskpard, and paragon. but also not working. the C drive was shrink but theres no unallocated space and no D drive (the new create partition). i try logical partition,primary,ntfs and fat but also not working. even the unallocated space also gone. i use almost 4 3rd party partitioning software but still got no luck with it.example:i divide 300gb into 2 partition which exist the C partition 150Gb but the other one gone. i wish theres other way than format. i also done many time. doing check disk, partition table doctor, searching for bad sector. but no errors with my hdd.
i recently installed windows 7.. it had only 2 drives c: and d: .. i need to partition d: drive into 3 partitions. is it possible?
View 4 Replies View RelatedI have Windows 7 ultimate 64-bit installed on DELL desktop (Optiplex 990) i7 Core. I have two HDD: Disk 0 contains the operating system 500GB. and Disk 1 empty 1TB.
I want to make a partition on disk 1 to mirror the operating system partition and keep the remaining for data storage. I tried to do but I had the following error message: "All disks holding extents for a given volume must have the same sector size, and the sector size must be valid."
I tried to attach a screen shot but couldn't.
I'm building a new computer. Can I partition the hard disk, copy my laptop HD to boot from one partition and run a new windows 7 pro os from the second partition?
View 5 Replies View RelatedHow can i remove this bar?
View 5 Replies View Relatedi installed a privatized vpn form the website http://searchab.com/?aff=7&uid=e8e48831-4e17-11e2-be75-5404a6e253a3&q=%s and i have no idea how to remove it.i have bitdefender but its not detecting anything in the system
View 3 Replies View Relatedevery time I start up Google I get the message:The Ask Toolbar has been successfully installed. With the option to enable or don't enable.I do not want this and click don't enable, but it still appears the next time I google.I have run msconfig.exe and went into Startup programs hoping to delete it, but its not listed
View 3 Replies View Relatedjust built a new rig. Installed windows on a fresh HDD, using the old hdd for data and stuff but the old windows is still on it, promting me every time i boot to select OS and taking up space
View 7 Replies View RelatedI've tried using the command prompt which then said I needed to run in elevated mode so I ran as administrator and it then said can't be formatted because of the partition?
View 13 Replies View RelatedI wanted to resize a partition, so I backuped all important files and booted from a vista PE CD. The program used is called "Easeus". After the resizing a message appeared, which told me that the system information couldnt be updated. After a restart, it - well, it didnt restarted. I tryed to format my C:Windows partition, but Easus decided to randomly format my linux partitin, too. Yey. After that i just formated everything, so i can create one big partition so this never happens again :P. To put it in a nutshel, there is no way to boot besides from booting from a cd. The diagnostic tool of the fabricator is giving me the "error code: BIOHD-3 No bootable drives detected" message.I tried to fix it with a win7 repair disk (just realized, that the disk is for 64bit, i have a 32 bit os - i think it doesnt matter, because there isnt any os installed at all). I used pretty much every "bootrec" command, sucessful, but no change. The startup repair gave this message: "the partition table does not have a valid system partition" diskpart - act isnt helping either: "The specified partition type is not valid for this operation."I dont know if i could install any os from a disk - i dont have a bootable installation cd/dvd. Because of that i would be happy if someone can tell me where i can find a free os and how i install it. From a os i can install my win 7.
View 1 Replies View RelatedI just cloned two partitions from a resident HDD to an auxiliary Momentus XL HDD in an enclosure that is connected to the computer via eSATA.Is there a way to compare each cloned partition with its original for integrity? If this were just a file, I'd use a unix/cygwin utility like diff or cmp.However, it is a partition.
View 7 Replies View RelatedI'm preparing a fresh install of Win 7 Pro on a 2 disk system (90GB SSD and 1TB HDD). I'll be placing the OS/Apps on the SSD and Data and image restore files on HDD.Qs:1. If I allocate ~60GB for the OS/Apps partition, and actual storage of the OS/Apps is 35GB...what size partition do I need on the HDD to save this image file? I assume the compressed file will be 45-50% of original. Will I want to store multiple image files created over the course of time as apps are added and system is further optimized, and hence need a partition that is a multiple of the OS/App partition size? What do you do?2. Also, an 8GB RamDisk will serve as scratch disk space for some apps (RamDisk +) which can save an image of the session's writes upon shutdown. I plan to save this image to the 2nd HDD. Is it recommended that I save this to same partition that stores the OS/App image in Q #1 above,
View 9 Replies View Relatedi have a hp laptap with a core i3 . with 8gig of ram. 500 gig hard drive. i made a 100 gig partion and it went to dynamic changing it back to basic. i read the mini tools application. if i tried that would it erase my hard drive if i went back to basic. all i wanted was a back up for my files.
View 1 Replies View RelatedTable top, Acer brand, Aspire M5700HDD: 500GBPart: 1. Hidden partition, 20GB, eRecovery2.Partition C partitioned by Acer, 240GB, OS3. Partition D partitioned by Acer, 240GBI plan to format both C and D partitions and make 4 partitions.So, check with Acer firstAcer's reply is confusing, saying that the hidden partition will be damaged if format C partition
View 9 Replies View RelatedI currently have a dual boot on my computer with Windows 7 and XP. Unfortunately as my computer is quite old my hard drive is not very big and with it being partitioned I am fast running out of disk space. So I tried to shrink the XP partition to allow me more disk space for Windows 7. Unfortunatley this would only let me shrink it by 83mb for some reason. I decided that since I barely use XP anymore that I would simply reformat the XP drive then try and merge them together. When I tried to format the partition it just gave the error "Windows was unable to complete the format". I then discovered in Disk Management that the Windows XP partition was the system partition which was causing the problem.
View 4 Replies View RelatedI have started the installation process of windows 7 on a clean 1 TB hard drive. In order to ensure expediency of the read time of my primary drive, I choose the custom installation. When I did I partioned the drive as 250GB & 700GB. Hoever it also created a 100MB system partition on its own. It never did this in Vista. Is it suppose to do that?
View 2 Replies View RelatedI am trying to keep the size of Image Files as small as possible. I'm told that it helps to keep these files from getting too big if I move the Page File away from the drive being imaged - in this case , my C: bootable drive.
View 9 Replies View Related