I was using dual boot (Windows 7 + vista)
wanted to remain only with win 7
formatted vista partition (don't know how I succeeded eventually...)
now, win 7 boots fine
but I still have the vista partition which is empty, except for BOOT FILES ON IT!!!! (win 7 partition does NOT have boot files or bootmgr).
when entering disk management, I cannot delete old vista partition (marked as system) but I really want to what should I do?
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
View 9 Replies View RelatedRemoving partition from win 7 Pro 64 bit. Is it possible to run win 7 pro 64 without any HD partitions?
View 11 Replies View RelatedI do an annual windows reinstall from an iso I made of the windows boot CD when I bought windows 7. I made the iso because it's easier to keep track of files rather than CDs, and whenever I would need to reinstall I would burn the iso to a disc, install from the disc, and throw out the disc once the install was complete. Well tonight I ran out of CDs with a large enough capacity to hold the iso, so I decided to get a bit fancy.
I mounted the iso and ran the setup utility through windows, and had it install a new partition of windows to one of my unused storage drives. The install went well, I restarted, and saw that there was an option to boot from two partitions of windows 7. I eventually figured out which one was the new one, and once desktop loaded up I went into msconfig and removed the old partition from the boot tab.
The problem pops up when I went back to reformat the old partition. It gave me an error stating that it cannot format a system drive. I figure that this is because the old partition is still active somehow even though I removed it from the msconfig boot menu.
Through a bit of googling I got a general idea of what had to be done, so I went into disk management and set the new partition to 'active'. I then restarted and went into BIOS, and switched the disk boot order so that the new partition came before the old partition. My bios did not like this, because it gave me an error about NTLDR missing. So it almost appears that the NTLDR thing isn't on the new partition, but that's just a guesstimation.
Other information:
- Old partition is "disk 0" in disk management
- New partition is "disk 1" in disk management
- I cannot modify or delete any of the system files on the old partition when I'm booted in the new partition.
Just want to run something by you guys before I install my compy of Windows 7 Ultimate on my laptop.
I have a Fujitsu-Siemens Amilo Xi 2250 with Vista Home Premium. When I got the laptop I created the restore DVD:s (3) and have since then used them a couple of times.
From what I've gathered reading trough this and other forums, and from my own knowledge and experience it should be safe to remove the recovery partition from the HD right? Or could I run in to some kind of problem if I'd like to go back to Vista using my recovery DVD:s and the partition is not there? As I understand it if I for example had a Dell it whould be ok, but could it be different on my computer? Or do these recovery-partitions always work the same way?
Also, if I decide to leave the partition there and I do a clean install of Windows 7 will this do anything to the restore partition? Cause in that case I could just leave it there right?
I currently have Windows 7 installed on a two partitioned hard drive. One partition has all the system files and such while the other is not in use. If I remove the partition that I'm not using to free up space will Windows on the other partition be deleted?
Also, would anyone have a recommendation on a good free partitioning software?
I am running Windows 7 all great and haven't had any problems, I want to make Windows 7 my sole operating system and remove my XP partition. I managed to install Windows 7 on a separate partition with no problems but just wondering if it's all fine to go ahead and delete my XP partition and then resize my Windows 7 partition back up, this wouldn't create any problems?
Just a matter of backing up all the essentials first, just in case?
I have a copy of windows 7 from a friend. (USB, possibly enterprise)It runs well, is official and can be re installed and is verified through the Microsoft site, so the media doesn't seem to be a problem.I was able to install Win7 Ult x64 on my WinVista HomePrem x86, but I went back through to clean the hard drive (it was full, I didn't format before) and after low level formatting I cannot reinstall the OS. The harddrives are completely empty, and I get stuck at "Setup was unable to create a new system partition or locate an existing system partition," after hitting next when you are selecting the HD partition to install on. I tried a couple of things already:
-Installing on another harddrive
-Formatting using Hiren's bootcd
-Using a hard drive with XP installed to see if it is an upgrade and not a full version (no luck, still wouldn't install)
-diskpart > list disk > select disk 0 > list partition > active \ in cmd..I have three hard drives attached to the computer right now, they can't all be broken. T.T
I've got a laptop with a partition on the main drive that holds some of the programs that came with the laptop (fingerprint reader, webcam software, etc.), but it's a 28 gig partition, and it's only using 2. I was wondering how I would go about removing the partition, but keeping the programs on the it. Will it work if I just copy-paste them over to the main drive and delete the partition? This is probably a stupid question, but I figure it's better to ask and know than guess and mess something up. There's also a folder in the partition called drivers, so my guess would be the aforementioned copy-paste technique won't work.
View 1 Replies View RelatedI should know the answer to this question but my mind isn't working. I have done this before but can't remember how *exactly* I did it.
I took my sister's 150GB HD and set her up with a dual boot with Windows 7 and XP. She now wants me to take Windows 7 off and just use XP for a while. If I use a 3rd party partitioning tool to remove the Windows 7 partition FROM WITHIN XP, will this screw up the boot manager? I think it should be fine. Just take out the partition and extend the XP partition into the free space and it should just boot to XP. Is this correct?
Recently my SSD failed so I tried installing windows 7 from DVD on my HDD but I always get an error message: "Setup was unable to create a new system partition or locate an existing system partition."I've tried everything I could find here: I gave boot priority to the HDD, I unplugged every other device but nothing seems to work.
View 4 Replies View RelatedThrough a series of shenanigans involving experiments with mirroring on Windows 7 64 bit using Disk Management, and then subsequently removing the mirror after having recurring errors/problems with the synching, My 100MB System Reserve partition has ended up on a separate partition than my system image. For instance: Disk 1 System C: Healthy (Boot, page...) Disk 0 Healthy (System Reserved...).
In addition, the System Reserved partition has been assigned a drive letter "G:" or "E:" and is now visible in explorer and it won't allow me to remove it and supress from explorer view.
I'd like to
1) move/create the System Reserve partition to Disk 1 (with System C: drive)
2) remove the System Reserve partition from Disk 0 to free it all up as a data drive
Do I use command below to create a System Reserve on Disk 1? bcdboot C:Windows How do I then delete the System Reserve partition on Disk 0. Also a byproduct of all of this, when I reboot now, I have a "Windows 7" option and a "Windows 7 Secondary Plex" option. The "Windows 7" option no longer boots (it's stops while the logo panes are flying in circles to form the logo and goes into a fix loop that never fixes it). I have a feeling it's looking for the old mirrored hardware configuration or something. However, "Window 7 Secondary Plex" option does boot just fine. Do I use MSCONFIG to remove the "Windows 7" boot entry so I don't get this annoying option at boot?
i bought a custom built PC and i was curious on how to remove the logo from system e.g. like when i press start, right click my computer, then click properties
View 2 Replies View RelatedRemoving operating system I have 2 operating system win 7 and win 8 In Which Win 7 is in c and 8 in d I want To Remove my window 8
View 4 Replies View Relatedi'm trying to understand what these folders are for, they are on my non system drive, i'm guessing they are left over from a previous windows installation. when I try to remove them it says I have no permission to modify them. How would I go about deleting them?
View 1 Replies View Relateddeleting/ removing a duplicate windows that I had accidentally created. I tried to delete the partition that I created by going to the disk management option but when I click on the partition, i don't have the option to delete the volume. I don't even know If im doing it accurately or not.
View 14 Replies View RelatedI tried doing SFC /SCANNOW but its not working certain programs that I try to run they won't run e.g. cmd.exe, sfc.exe and a few more...
View 4 Replies View RelatedI have a system that dual boots with Windows 7 (64 bit) and Windows XP (32 bit); each OS is on its own hard drive. I want to reformat the Windows 7, deleting the OS in the process. What I'm wondering is where is the boot loader located? Is it on the Windows 7 drive (since it was installed after XP), and will I need to do anything special to have the system load Windows XP by default after the Windows 7 installation is gone? Will the system simply detect the old XP installation and load it without the bootloader?
View 2 Replies View RelatedI have Windows 7 ultimate 64-bit installed on DELL desktop (Optiplex 990) i7 Core. I have two HDD: Disk 0 contains the operating system 500GB. and Disk 1 empty 1TB.
I want to make a partition on disk 1 to mirror the operating system partition and keep the remaining for data storage. I tried to do but I had the following error message: "All disks holding extents for a given volume must have the same sector size, and the sector size must be valid."
I tried to attach a screen shot but couldn't.
Logging as administrator, I tried to remove admin password. It wouldn't let me do it and now, when I restart and click on the admin icon to log in, it tells me the system is read only and shuts down. If I run f2, f8, etc. The computer shuts down after 30 seconds or so.
View 1 Replies View RelatedI wanted to resize a partition, so I backuped all important files and booted from a vista PE CD. The program used is called "Easeus". After the resizing a message appeared, which told me that the system information couldnt be updated. After a restart, it - well, it didnt restarted. I tryed to format my C:Windows partition, but Easus decided to randomly format my linux partitin, too. Yey. After that i just formated everything, so i can create one big partition so this never happens again :P. To put it in a nutshel, there is no way to boot besides from booting from a cd. The diagnostic tool of the fabricator is giving me the "error code: BIOHD-3 No bootable drives detected" message.I tried to fix it with a win7 repair disk (just realized, that the disk is for 64bit, i have a 32 bit os - i think it doesnt matter, because there isnt any os installed at all). I used pretty much every "bootrec" command, sucessful, but no change. The startup repair gave this message: "the partition table does not have a valid system partition" diskpart - act isnt helping either: "The specified partition type is not valid for this operation."I dont know if i could install any os from a disk - i dont have a bootable installation cd/dvd. Because of that i would be happy if someone can tell me where i can find a free os and how i install it. From a os i can install my win 7.
View 1 Replies View RelatedI currently have a dual boot on my computer with Windows 7 and XP. Unfortunately as my computer is quite old my hard drive is not very big and with it being partitioned I am fast running out of disk space. So I tried to shrink the XP partition to allow me more disk space for Windows 7. Unfortunatley this would only let me shrink it by 83mb for some reason. I decided that since I barely use XP anymore that I would simply reformat the XP drive then try and merge them together. When I tried to format the partition it just gave the error "Windows was unable to complete the format". I then discovered in Disk Management that the Windows XP partition was the system partition which was causing the problem.
View 4 Replies View RelatedI have started the installation process of windows 7 on a clean 1 TB hard drive. In order to ensure expediency of the read time of my primary drive, I choose the custom installation. When I did I partioned the drive as 250GB & 700GB. Hoever it also created a 100MB system partition on its own. It never did this in Vista. Is it suppose to do that?
View 2 Replies View RelatedSuddenly my Win 7 Home Premium x64 will not boot. The system starts, POSTs then loads the DVD driver, then the screen goes black (not blank but "lit up" black if that makes sense). Then nothing. If I use Hiren's boot cd I can boot up using the "boot from HDD" option fine and Windows operates normally. System restore to a previous configuration made no difference to the original problem. I cannot boot into Safe Mode. F8 just offers me boot order options.
- Running the Windows 7 DVD I find: "No operating system is listed on the Repair Windows option."
- Running Startup Repair finds the following error: "the partition table does not have a valid system partition" which it claims to have repaired, but the error remains and Windows will still not boot.
I followed this advice:
Boot 7 dvd to system recovery options command prompt. Type: Diskpart
list vol (find the vol letter e.g C or partition number e.g. 1 for the system partition )
Sel vol C ( or sel vol 1, obviously use the correct letter or number)
act exi
My system partition was easily identified and listed as healthy so I selected it and made it active. The problem still remains exactly the same. My system is self built just over a year ago, to my knowledge has been running fine, without any hardware issues. I'm prepared to do a clean install if that's what it takes but if there is a way to fix the partition problem without that I'd like to explore it first.
I recently acquired a 60GB SSD and want to migrate my current system hard drive to the new drive. However, when I go to the Windows Backup manager to create a system image, it wants me to copy ALL of C partition and ALL of D, when it should only be C.D drive is full of a bunch of crap that I do not want included in the system image.If there even are system files on D, by no means is copying the entire partition necessary!Therefore, is there any way to make partition D NOT a system partition?
View 1 Replies View RelatedA friend has asked me to install Widows 7 on a friends laptop which has XP. The laptop doesn't have a DVD drive (no drive at all) so I've had to stick the installer on a USB stick from disc using a program.The USB boots up fine on the laptop, just like a disc. I formatted 2 partitions (same drive) and tried to install windows 7 but I get this error:"setup was unable to create a new system partition or locate an existing partition"So now, I have someone else's laptop with no OS. The owner is a 70 year old computer illiterate man.i'm planning on trying to install Vista instead and if successful, upgrade to 7. I would have upgraded in the 1st place, but P can't be directly upgraded to 7.
View 6 Replies View RelatedI have WinXP installed on C: and Windows 7 installed on D:. As you can see in the attached image, C: is marked as a system partition but in fact I'd like to delete it and leave only D: with Windows 7 on it. However I can't delete it because it says it's a system partition soooo... how do I do this? Is setting the C: as inactive in command prompt (and D: as active) enough? Or can I just merge these 2 partition into one? I tried EaseUS but it says that boot or system partitions cannot be modified/merged.
View 8 Replies View RelatedI just installed Windows 7 Ultimate 64-bit and saw that the users private and public data are still saved in the C:Users of the system partition.
So, I'm looking for a specific guide for Windows 7 that separates the system partition from the users private and public data, saved in another partition on the same disk. In addition, private data created during the creation of new accounts (including the Administrator account) must be saved directly in the other partition.
In other words, in the C:Users directory, the All Users, Default and Default User directories must only remain and its must to be fully functional.
I'm sure there's probably a tutorial for this somewhere in the tutorial index but I can't seem to find it.
I have 3 partitions on my hard drive. C is for Windows 7 32 bit Ultimate, D is for Vista 32 bit Home Premium and E is a recovery partition. My problem is that I want to delete my Vista partition and then expand my 7 but there's one thing in the way.
D is my system partition. What I want to do is make C my system partition. Just as an extra bit of information, here's the status
E: Healthy, Primary Partition
D: Healthy, system, primary partition
C: healthy, boot, page file, active, crash dump, primary partition
I have a new PC (HP) that came with an OEM version of Win 7/64, I also purchased an SSD that I had planned to use for a boot disk with all libraries on a second 1TB HDD.
I successfully installed Win 7 on the SSD and was happy for a bit, until I discovered some instabilities. Long story short, HP does not release the drivers for their in-house products and I could not stabilize the system, so I moved the SSD to Drive D and re-installed from the factory image. All the drivers I need are there and system is 100% stable.
is there a way to move the System partition over to the SSD so I get the 10 second boot that was so nice?
I have recently installed a 64bit version of Windows 7 on my computer without removing the old one(32bit). The reason for not removing the old one was that my DVD writer broke so I had to install the 64bit version while still using the 32bit version. I borrowed a friend's memory stick, put the window 7 disc's contents on the USB. I then made it into an image and mounted it. The installation was perfectly fine, got new drivers and all, but when I tried to format(or delete) the C partition on which I have my 32bit windows installed it displayed the following error message http://puu.sh/1YRwa I then stopped the old OS from booting, but I'm stuck here. I still can not format the partition, as it's still a system partition.
View 5 Replies View Related