I currently have Windows 7 installed on a two partitioned hard drive. One partition has all the system files and such while the other is not in use. If I remove the partition that I'm not using to free up space will Windows on the other partition be deleted?
Also, would anyone have a recommendation on a good free partitioning software?
I do an annual windows reinstall from an iso I made of the windows boot CD when I bought windows 7. I made the iso because it's easier to keep track of files rather than CDs, and whenever I would need to reinstall I would burn the iso to a disc, install from the disc, and throw out the disc once the install was complete. Well tonight I ran out of CDs with a large enough capacity to hold the iso, so I decided to get a bit fancy.
I mounted the iso and ran the setup utility through windows, and had it install a new partition of windows to one of my unused storage drives. The install went well, I restarted, and saw that there was an option to boot from two partitions of windows 7. I eventually figured out which one was the new one, and once desktop loaded up I went into msconfig and removed the old partition from the boot tab.
The problem pops up when I went back to reformat the old partition. It gave me an error stating that it cannot format a system drive. I figure that this is because the old partition is still active somehow even though I removed it from the msconfig boot menu.
Through a bit of googling I got a general idea of what had to be done, so I went into disk management and set the new partition to 'active'. I then restarted and went into BIOS, and switched the disk boot order so that the new partition came before the old partition. My bios did not like this, because it gave me an error about NTLDR missing. So it almost appears that the NTLDR thing isn't on the new partition, but that's just a guesstimation.
Other information:
- Old partition is "disk 0" in disk management
- New partition is "disk 1" in disk management
- I cannot modify or delete any of the system files on the old partition when I'm booted in the new partition.
Removing partition from win 7 Pro 64 bit. Is it possible to run win 7 pro 64 without any HD partitions?
View 11 Replies View RelatedJust want to run something by you guys before I install my compy of Windows 7 Ultimate on my laptop.
I have a Fujitsu-Siemens Amilo Xi 2250 with Vista Home Premium. When I got the laptop I created the restore DVD:s (3) and have since then used them a couple of times.
From what I've gathered reading trough this and other forums, and from my own knowledge and experience it should be safe to remove the recovery partition from the HD right? Or could I run in to some kind of problem if I'd like to go back to Vista using my recovery DVD:s and the partition is not there? As I understand it if I for example had a Dell it whould be ok, but could it be different on my computer? Or do these recovery-partitions always work the same way?
Also, if I decide to leave the partition there and I do a clean install of Windows 7 will this do anything to the restore partition? Cause in that case I could just leave it there right?
I was using dual boot (Windows 7 + vista)
wanted to remain only with win 7
formatted vista partition (don't know how I succeeded eventually...)
now, win 7 boots fine
but I still have the vista partition which is empty, except for BOOT FILES ON IT!!!! (win 7 partition does NOT have boot files or bootmgr).
when entering disk management, I cannot delete old vista partition (marked as system) but I really want to what should I do?
I am running Windows 7 all great and haven't had any problems, I want to make Windows 7 my sole operating system and remove my XP partition. I managed to install Windows 7 on a separate partition with no problems but just wondering if it's all fine to go ahead and delete my XP partition and then resize my Windows 7 partition back up, this wouldn't create any problems?
Just a matter of backing up all the essentials first, just in case?
I've got a laptop with a partition on the main drive that holds some of the programs that came with the laptop (fingerprint reader, webcam software, etc.), but it's a 28 gig partition, and it's only using 2. I was wondering how I would go about removing the partition, but keeping the programs on the it. Will it work if I just copy-paste them over to the main drive and delete the partition? This is probably a stupid question, but I figure it's better to ask and know than guess and mess something up. There's also a folder in the partition called drivers, so my guess would be the aforementioned copy-paste technique won't work.
View 1 Replies View RelatedI should know the answer to this question but my mind isn't working. I have done this before but can't remember how *exactly* I did it.
I took my sister's 150GB HD and set her up with a dual boot with Windows 7 and XP. She now wants me to take Windows 7 off and just use XP for a while. If I use a 3rd party partitioning tool to remove the Windows 7 partition FROM WITHIN XP, will this screw up the boot manager? I think it should be fine. Just take out the partition and extend the XP partition into the free space and it should just boot to XP. Is this correct?
I have a disk with 3 partitions:
1 - Windows 7
2 - DATA
3 - Linux Ubuntu
Recently I decided to delete Ubuntu once and for all. To do this, I followed this tutorial: Partition or Volume Delete,However I cannot pass step5. Once I click "yes" I get the most retarded and frustrating error message I've ever seen in all my life (and I've seen lots of them),-"An unexpected error has occurred. Check the System Event Log for more information on the error. Close Disk Management console, then restart Disk Management or restart the computer."I closed an opened the program - it didn't work.I restarted the computer - it didn't work.I checked the Event Log - Lot's of random information and garbage over all.In order to fix the problem I spent the rest of the night searching for a solution, but my best friend Google has failed me, apparently no one has ever had this error before.... people usually get error codes or something similar to identify the errors ... but not me ... I guess I must be special .I've also decided to use diskpart and my good old friend - the command line. This is what I gotD
[code]...
i was using hp g42 laptop i was delete the hp tools partition.in this situation the total os was crashed and i lose the total data how can iget the data?
View 2 Replies View Relatedbut i was wondering do i delete the partition and then create a new partition or do i format it? (see picture)
View 6 Replies View RelatedI am on my grandparents desktop, and they recently had me dual boot Windows 7 onto their Windows XP machine, and they now no longer need XP anymore. The XP partition is listed as a System, Healthy, Active, Primary partition. The 7 partition is listed as a Boot, Active, Healthy, Logical partition. How can I delete/format the XP partition and make the Windows 7 a primary partition? I have tried by using Disk Manager, and Eauseus Partition Manager, but it won't let me convert it to primary, or format the XP partition.
View 14 Replies View Relatedi bought a used computer from a pawn shop with windows xp and windws 7. I boots up 7 but is to slow. windows xp has a password needed to open that i dont know. how can I dump 7 and open xp without the password.
View 1 Replies View RelatedI have a 6 month old HP Pavilion dv6.When I was partitioning the hard drive, some error occurred and the process got interrupted( this was after the 'shrink the primary partition'0 step). Disk Management Window didn't show any new partition, so I went on and created two new partitions, but afterwards, I can see an extra partition in My Computer. No info like disk capcity etc., visible; It just has the name 'Local Disk (Q)'. I tried running Disk Management again to get rid of it, but it's not shown in the Disk Management listing. How do I delete it? I tried system restore, but no system restore points prior to the partitioning available
View 3 Replies View RelatedI was running Windows Vista on my C drive and had purchased Windows 7. Prior to installing Win 7, I partitioned my C drive (since it was one giant drive) and made a new one and labeled it H. I then went on to install Windows 7 on the H drive, which went smoothly. Now I'd like to delete the partition that contains Vista.
However, I am not able to delete it and I get an error. I have attached the screen shot of my disk management. If someone could explain how I could go about in order to delete the C partition, that would be wonderful. I again apologize for starting this thread if someone else has posted the same thing elsewhere.
I had windows vista home premium 64bit in a dual boot with windows 7 ultimate beta build. Then I got my upgrade cd and upgraded vista to Windows 7 home premium 64bit. So now I have a dual boot with Windows 7 (new version with all my files on it) and Windows 7 (old beta with almost nothing on it except for Windows 7 beta). In the disk manager, it says "system, BOOT, page file, active, primary partition" for the new Windows 7, and just "primary partition" for the old beta partition.
I'm pretty sure this means I can delete the old partition and re-allocate the space to my main partition, but I'm posting this just to be sure because I learned a hard lesson when I deleted an ubuntu partition that was in charge of the boot.
I have two primary partitions and I want to delete one of the and completly expand the other. When i get in my computer/manage/disk management if i right click a partition it won`t let me le delete it or expand it. How can I have A SINGLE hard drive completly expanded ?
View 8 Replies View RelatedI have a Presario Compaq CQ60 laptop
I've been to their chat they said if I install Windows7 It will erase/delete my recovery partition.. is there anyway i can avoid this? I'm making a recovery disks right now will that help?
I had fedora12 dual booted on my laptop, I needed to erase the partition and re install Linux, so I deleted the partition data, but when I tried to delete the partition itself. An error popped up saying it cannot be deleted not enough memory
View 5 Replies View RelatedI had a dualboot of Windows 7 and Windows XP. Later I just only wanted to have Windows 7. So I downloaded Vista Boot Manager and deleted Windows XP on the list, so now its only booting from Windows 7. But all those files of Windows XP are still left on the partition. And I have no access to delete them, not even in a save boot. Unlocker helped me a while, but I'm now stuck with 3 folders which I can't delete. I've got now 50 GB left on my HDD, and the partition of Windows XP was 200 GB, so I think you can realize I want those GB back!
View 4 Replies View RelatedI have WinXP installed on C: and Windows 7 installed on D:. As you can see in the attached image, C: is marked as a system partition but in fact I'd like to delete it and leave only D: with Windows 7 on it. However I can't delete it because it says it's a system partition soooo... how do I do this? Is setting the C: as inactive in command prompt (and D: as active) enough? Or can I just merge these 2 partition into one? I tried EaseUS but it says that boot or system partitions cannot be modified/merged.
View 8 Replies View RelatedI have 4 partitions on my notebook.
C: is Windows 7 32-bit
D: is Vista 32-bit
E: is Windows 7 64-bit
F: is Data.
I now want to get rid of the Vista partition and give its sectors to the Windows 7 64-bit.
I tried shrinking the Vista partiton, but the extend option is greyed out for Windows 7 64-bit.
How do I remove Vista and have it deleted from the boot manager setup?
Then how do I extend the Windows 7 64-bit into the, now empty, Vista partition?
i upgraded from windows XP 32bit to Windows 7 ultamat 32bit. my raptor HD is still almost full. is it because there is still the XP partition? if so is it ok to delete XP partition and windows 7 will run fine and be like a fresh install?
View 1 Replies View RelatedI have not backed up my system for 2 years, last time it was brand new with vista, now I have win 7. This partition is taking up a couple of gigs of hard drive space. So is it OK for me to wipe this partition clean? Does it auto-save stuff on it?
View 3 Replies View RelatedCan I remove partition D were my original setup info is on.I have a vista configuration as original.Now i am running WINDOWS 7 ULTIMATE.Made backup from day one on 3 disks.
View 1 Replies View RelatedI'm not sure if this thread belongs here or not, but I'm having an issue that is driving me nuts.
I have 2 hard drives, a 200 gig 7200rpm and a 35 gig 10000rpm. The 200 gig is split into two partitions. 150 gig and 50 gig. Originally, I had the Vista Upgrade installed over XP on the 50 gig and all my media and junk on the 150 gig partition. A few choice programs were installed on the 10K.
I decided I wanted the Windows 7 Upgrade to be installed on the 10K from now on so that things move a bit faster, boot times and whatnot. So I did and now I have the 150 gig partition free and wiped, but the 50 gig partition with my old Vista won't wipe, format or delete whatsoever, and it won't let me boot from any of the discs so I can just delete and wipe everything and start over.
It feels like a jumbled mess and I just want to get it all right. How on earth can I delete, format or completely wipe my 50 gig partition so I can delete that partition and make it whole with the other 150 gigs and just have all of Windows installed on my 10K?
I tried changing my boot order in the bios and it just tells me to insert the system disc. It won't recognize it and let me delete the partitions manually.
How to Delete a Partition or Volume in Windows 7 ?
View 0 Replies View Relatedmy computer os is xp, then i tried to reformt it in win7, but i seems like i just install the win 7 in the other partition.. what i want is to reformat the whole compter and install win7, when i tried to delete the partition, i cant find how to delete it and make a new one.
View 6 Replies View RelatedI have installed Windows 7 on my D: drive. I have placed a NEW installation on my C: drive besides it.See the attached image.I ONLY use the W7 on the C: drive now, so I want to delete my D: partition completely (416GB).HOWEVER, I see that it is labeled: "System, Active, Primary Partition".Can I just format this drive and will my PC still boot or do I have to take particular steps?
View 3 Replies View RelatedI recently upgrade my entire computer, with it i brought a 2TB WD HDD. I set everything up, installed Windows 7 and updated all my drivers/etc.
I then moved my old 3x 1TB drives over, in it, one partition had my old Windows 7, I am unable to format/delete windows folder/program files. One HDD had my old Vista partition, same story..i can't format/delete.
What i basically want to do is, take those 3 drives, format and re-set them into 1TB 1 Parition drives. Now i have 1.6TB space left on my 2TB drive, so i can put one entire drive over and format the old, repartition to 1...
How can i get about this? I don't understand why the boot system will have problems because when i installed Windows 7 it had no other drives to see..
I installed a os on a separate drive , now i was going to delete partition / and or format that drive in the "right click my computer and maintenance" but i cannot because format and delete partition are grayed out. The drive is displayed as having a paging file. How can i delete this partition and format this drive? Can't also in safe mode
View 1 Replies View Related
