Realtek Output - No Digital Data
Sep 6, 2012
My optical audio output used to work fine. Now when I set my "Realtek Digital Output" to default, the bars work as they should and the red light passes through the optical fiber cable. But when it reaches my "receiver" (Logitech Z-5500), it says "No Digital Data". It is as if my receiver can not read the data that gets sent through the cable. This issue occurred on my laptop, When I take the same cable and plug it in to my desktop's SPDIF Out, it works as normal, the receiver plays audio. I have tried 3 receivers with the same outcome. I have also tried to update my audio driver.
View 1 Replies
ADVERTISEMENT
Jun 15, 2010
I have Fujitsu-Siemens Laptop with Realtek Audio card built-in. Initially when I open the Realtek Audio Manager it shows Speakers and Digital Output as well. I have disabled the Digital Output at certain time, and now cannot find a way to enable it again.I've searched in the Control Panel, tried trouble shoot utility from the Control Panel and have got no idea how to enable Digital Output back.
View 9 Replies
View Related
Jul 18, 2012
I have a Samsung laptop (Windows 7 x64, Realtek) connected to a TV via HDMI cable (audio over HDMI). Some time back, I had got HDMI Audio option (in Control Panel -> Sound) disabled so that I could use Realtek Digital Output (via headphone jack to Coax on my receiver) and it worked fine. Recently I played with these settings again due to change of receiver. I actually cant recall what started the problem, but Realtek Digital Output has disappeared. I have got 'show disabled/disconnected' option on but that did not help. The analog output (also Realtek) continues to show.I rolled back, uninstalled, re-installed the Realtek HD driver a few times, but nothing has brought the Digital Output option back.
View 9 Replies
View Related
Mar 20, 2011
can I switch from my Realtek internal speakers to digital output without manually changing it in the Audio Control manager?
View 1 Replies
View Related
Nov 9, 2011
i'm having problem with my realtek. its shows that my realtek digital output shows not plugged in.
View 1 Replies
View Related
Aug 25, 2011
I cannot hear any sound from my PC, I tried connecting through both the front panel and the back panel to no avail.I however did notice that the only panel option available on Realtek HD seems to be the Realtek HD Audio rear output and that doesn't work.It's quite frustrating because I can't hear any sound from my computer even when I used a headphone.
1. how do I change from Realtek HD Audio rear output ie back panel to front panel?
2. is there anything else I should do?
View 2 Replies
View Related
Nov 20, 2009
I've upgraded from vista to 7 and I am getting no sound, I've searched, searched and tried alot of different things, I see alot of people on this forum with the same issues, but I've tried most of them. I've installed and unistalled all the different drivers from realtek, but no luck. I have realtek high definition sound but no hdmi output. In my device manager it says the sound driver is installed properly, but when I tried to test the sound it fails to test tone, I don't know if it has to deal with an audio codec. I have regular speaker that connect to a sound jack. At this point I am quite desperate. I've spent all night trying to figure this out.
View 4 Replies
View Related
Dec 31, 2012
I tried most of the sensible remedies but no results.
View 2 Replies
View Related
Mar 9, 2010
This doesn't work. Very irritating.(I don't know if this RealTek sticky at the top of this forum is a solve for this, I'm not hot on registry changes and I'm not sure if this is a fix for this issue.)Firstly I have to turn off the front-panel detection in order for the front panel to be detected..?Secondly, I can't get the speakers to mute when the front phones are plugged in. I can do a manual switch from one to the other, but the front panel won't detect when things are plugged in.
View 9 Replies
View Related
Jan 15, 2013
I just realized that stereo output is inverted (L&R are swapped) on my Realtek front panel headphones connector and on my M-Audio Firewire card. Output is OK on Realtek rear main/front speakers connector.
View 1 Replies
View Related
Jan 21, 2013
I have a WD Passport, vintage 2007. I cannot access some large files that I created several years ago that I want to see, and then dump so I can use the file for backup for my new computer.
View 2 Replies
View Related
Oct 28, 2012
I'm trying to hook up my TV with my computer, and for the most part it's working. The video goes through and I get how to control it and everything. The only thing not working is the sound.
I'm using an HDMI to HDMI cable, and like I said the video is fine. Also, when the cable is plugged into my boyfriend's laptop, the sound comes out of the TV.
So this must mean the problem is with my computer specifically. Although, this computer is only a month old, so I wouldn't think anything is out of date.
View 2 Replies
View Related
Mar 31, 2012
I've recently switched to Digital Audio (S/PDIF) (High Definition Audio Device) using one Toslink cable instead of all the analog wires going from my PC to my receiver.The digital sound is amazing, CD quality from my PC is great.However, I now also receive the digitized sound of pages being loaded as I surf the web. All sound comes out digitized when loading a new page.Is there a way to stop this from happening while listening to music or course material without gong back to analog?Can I have my digital CD quality and enjoy it too!
View 1 Replies
View Related
Feb 20, 2012
i have downloaded realtek hd audio driver R2.67 from realtek website. but i need realtek hd audio manager. is realtek audio driver and manager are same?
View 1 Replies
View Related
Aug 18, 2012
So I've been using my 64GB ssd as my windows 7 boot drive and i have a 1TB hdd as my data drive. Recently the my computer has begun to freeze up with errors like "explorer.exe" has stopped responding or "windows" has stopped responding and half of the time when i try to boot it says it cant find windows. This has lead me to believe that my ssd is dying despite being only a year old. I need to RMA my ssd but to do that i would be losing my boot drive for weeks. So I thought id try to create a system image so that i can simply put my boot drive on my hdd, but when i try to create the image it says that the image would be 711GB because its including all of my hdd (which contains all my user libraries and downloads). My question is: how do I make windows stop thinking that my hdd is a system drive so that I can create a reasonably sized image, or more generally: how can i easily move my boot drive to my hdd? Also, I've read some posts about using "easyBCD" to accomplish the latter but I'm not sure that's exactly what i need in this situation.
View 4 Replies
View Related
Dec 3, 2009
just did a fresh install of Windows 7 Ultimate on my second pc, all went well apart from it gets to amd data change update new data to dmi then..... stops, it wont budge, i haven't touched anything in the bios or added any new hardwear.When i reboot, same again, went into the bios and made sure i have it set to boot from hard drive first.
View 6 Replies
View Related
Jun 2, 2011
forum i have a question. I have a kingston 30 gb ssd i use as my windows drive, and a 750 gb wd hdd for data/game storage. I have heard that you can ghost a file on the data drive into the x86 folder so that all new installs go there and then you still recieve most of the benefits of your ssd w/o clogging it up. I have an amd based system (dont know if that matters or not)
View 1 Replies
View Related
Aug 13, 2009
I am looking for a digital clock gadget. Please reply soon.
View 9 Replies
View Related
Dec 27, 2009
I am trying to use my digital concepts cr-70r card reader in Windows 7 and it is not being recognized. Anyone know of an available driver?
View 6 Replies
View Related
Nov 25, 2010
what is "Programs digital signature"? According to my knowledge some security software categorize programs trustworthiness using program digital signature. How do program developer get digital signature? Why some programs not have digital signature?
View 2 Replies
View Related
Jan 1, 2012
I have a HP Slimline PC and a SyncMaster 2343(BWPlus/BWXPlus)(Analog) Monitor. The monitor two connection options. It has a standard VGA & DVI-D Single Link. The PC only has the VGA(BLUE)connection. If I use an adapter,(DVI-D single link male 18+1 to VGA female) will my monitor then switch to digital?
View 2 Replies
View Related
Nov 21, 2009
As I posted in the monitors forum, I am having problems with a new LG W2053 TQ monitor. Being used with a new HP Pavillion Elite PC. Great picture, but just can't get any of the OSD or configuration screens to appear.
It has those touch sensitive buttons on the front. Have tried everything, but they never appear on the screen no matter how I press them (quickly, tapped, held for several seconds, etc.)
Other than that, the monitor is great.
Have it hooked up with a DVI-D cable for a digital connection, rather than VGA.
Was wondering if perhaps to get these OSD screens to appear, the monitor needs, and uses somehow, the analog VGA cable for this. So, thought I'd give it a try. Now have both cables in place.
But, I'm reasonably sure that the PC is still using the DVI-D digital cable for its output to the PC. Looked in all (I think all) the monitor related screens in Windows 7 but can't find where it is.
a. Is there an option in Windows 7, somewhere, to tell Windows7 which to use, and to switch the output spigots between VGA and DVI-D going to the monitor ?
b. Or, any thoughts as to why the config OSD screens won't appear would also be most appreciated.
View 9 Replies
View Related
May 11, 2009
I upgraded a desktop and laptop from Vista Ultimate to Win 7 RC and have the same problem on both. I can't install programs, run msconfig, cmd, regedit, etc, because I receive a digital signature error that is supposedly related to a recent hardware or software change. I can't even edit the properties of the accounts because of this same error.
Interestingly enough on my laptop one account shows a blank programs list when you go to start-all programs, but on the other account they show up. I restored the desktop from my windows home server and will shortly do the same on the laptop if I can't figure out this problem.
View 6 Replies
View Related
Jan 11, 2012
I was recently forced by my provider to change from analogue to a digital service. I received two basic analogue to digital converters and have them setup on media center (Windows 7). I have IR blasters going from the back of the USB MC dongle to the front of the 2 digital boxes. Problem: I can browse channels no problem when not recording anything. As soon as I begin recording a channel and change channels, it switches over to the second digital box/tuner but it won't change the channels. Media center seems to think it's changing but the instructions never make it back to the digital box. It's like it's never activating the second IR blaster. I switched some of the hardware around to no avail, same results either way. Both digital boxes are identical and both remotes worth with both boxes.
View 1 Replies
View Related
Nov 26, 2012
I am trying to add a public digital signature in word but am unable to do so. when I try to protect the document and go into 'protect document' --- 'add a digital signature' and selct change to change the signature it only displays my local signature (myemail@company.com) I would like to use a different signature like a public or trusted signature.
View 1 Replies
View Related
Sep 24, 2012
Downloaded Adobe Digital to load Kobo. Downloads fine, but gives Run error looking for Administrator. When i go into control panel, shows me as administrator. Tried all my passwords, not valid. What am i missing?
View 2 Replies
View Related
Oct 28, 2011
can i use canon degital camera as a web cam if so how can i use it.
View 2 Replies
View Related
Feb 27, 2012
I have a sony HI8 camcorder i would like to transfer video to my laptop (window 7)
View 2 Replies
View Related
Feb 6, 2010
I have upgraded to windows 7. please advise what drivers are available or whether I can use the
software I purchased with my camera which was 12 months ago.
View 3 Replies
View Related
Oct 31, 2010
I have a system drive on a workstation which is 1) removable, 2) contains 2 partitions - one for the sytem & data files, one reserved by the os.
I would like to use this drive and it's file data in an external drive case (SATA) connected to my notebook.
Will the notebook handle the external drive properly?
View 7 Replies
View Related
Jan 30, 2012
I bought my VGX-XL301 in August 2007 and it cam installed with Vista home addition and upgraded to Windows 7 Professional in April 2010. I have the computer linked to my Samsung HDTV via an HDMI connection.
Everything worked fine up until recently.
I am working on the computer and then switch HD inputs to watch TV. After a time the compuiter goes into sleep mode. The next time I want to use the computer, I press a key to bring it out of sleep mode. I switch it from the TV HD input to the PC HD input but no picture comes up.
I have to force a shut down by holding in the power button and then turn on. The PC then goes through the boot up and the PC picture appears, however sometimes it takes 2 or 3 forced shutdowns to make it work.
I have upgraded the driver on the graphics card as I thought that might be the problem.
View 8 Replies
View Related
