Realtek Digital Output Option Disappeared?
Jul 18, 2012
I have a Samsung laptop (Windows 7 x64, Realtek) connected to a TV via HDMI cable (audio over HDMI). Some time back, I had got HDMI Audio option (in Control Panel -> Sound) disabled so that I could use Realtek Digital Output (via headphone jack to Coax on my receiver) and it worked fine. Recently I played with these settings again due to change of receiver. I actually cant recall what started the problem, but Realtek Digital Output has disappeared. I have got 'show disabled/disconnected' option on but that did not help. The analog output (also Realtek) continues to show.I rolled back, uninstalled, re-installed the Realtek HD driver a few times, but nothing has brought the Digital Output option back.
View 9 Replies
ADVERTISEMENT
Sep 6, 2012
My optical audio output used to work fine. Now when I set my "Realtek Digital Output" to default, the bars work as they should and the red light passes through the optical fiber cable. But when it reaches my "receiver" (Logitech Z-5500), it says "No Digital Data". It is as if my receiver can not read the data that gets sent through the cable. This issue occurred on my laptop, When I take the same cable and plug it in to my desktop's SPDIF Out, it works as normal, the receiver plays audio. I have tried 3 receivers with the same outcome. I have also tried to update my audio driver.
View 1 Replies
View Related
Jun 15, 2010
I have Fujitsu-Siemens Laptop with Realtek Audio card built-in. Initially when I open the Realtek Audio Manager it shows Speakers and Digital Output as well. I have disabled the Digital Output at certain time, and now cannot find a way to enable it again.I've searched in the Control Panel, tried trouble shoot utility from the Control Panel and have got no idea how to enable Digital Output back.
View 9 Replies
View Related
Mar 20, 2011
can I switch from my Realtek internal speakers to digital output without manually changing it in the Audio Control manager?
View 1 Replies
View Related
Nov 9, 2011
i'm having problem with my realtek. its shows that my realtek digital output shows not plugged in.
View 1 Replies
View Related
Jan 11, 2012
Chasing a feedback problem, in desperation, I disabled the onboard microphone in my Dell 1564 laptop running Windows 7. The result was that the icon for the microphone disappeared and does not reappear on subsequent reboots. How can I set the Realtek controller back to default setting which would presumably bring the microphone back to life?
View 2 Replies
View Related
Jan 27, 2013
my computer is no longer seeing my realtek speakers
View 1 Replies
View Related
Aug 25, 2011
I cannot hear any sound from my PC, I tried connecting through both the front panel and the back panel to no avail.I however did notice that the only panel option available on Realtek HD seems to be the Realtek HD Audio rear output and that doesn't work.It's quite frustrating because I can't hear any sound from my computer even when I used a headphone.
1. how do I change from Realtek HD Audio rear output ie back panel to front panel?
2. is there anything else I should do?
View 2 Replies
View Related
Oct 22, 2011
The other day my layer's option disappeared from the bottom right of my photoshop and I don't know how to get it back! I can manually edit my layer's by going to file etc., but that just takes too long, how do I get it back? [URL].
View 3 Replies
View Related
Nov 20, 2009
I've upgraded from vista to 7 and I am getting no sound, I've searched, searched and tried alot of different things, I see alot of people on this forum with the same issues, but I've tried most of them. I've installed and unistalled all the different drivers from realtek, but no luck. I have realtek high definition sound but no hdmi output. In my device manager it says the sound driver is installed properly, but when I tried to test the sound it fails to test tone, I don't know if it has to deal with an audio codec. I have regular speaker that connect to a sound jack. At this point I am quite desperate. I've spent all night trying to figure this out.
View 4 Replies
View Related
Dec 31, 2012
I tried most of the sensible remedies but no results.
View 2 Replies
View Related
Oct 2, 2012
I bought a new monitor. Setting it up, the NVIDIA option on the control panel has disappeared.Instead, I have the Windows control panel for setting up a monitor, and the nVIDIA device driver for the monitor has disappeared. (There used to be two, the Intel 4 chipset for integrated graphics, and a second one for the nVIDIA device.)The Intel 4 device now lists "NVIDIA" as the manufacturer, NVIDIA is listed as the driver provider (driver version 8.15.11.8688 from 2009). There is an install date of 1/29/2012 though I've had the PC since 2009.Jan 2012 was about the time I reloaded a standard WIN7 after getting fed up with ASUS support for their OEM version (long story).I haven't looked at this in a long time, so no idea what happened.I would rather use the NVIDIA chipset, I think it works better than the integrated (that's why I bought it in the first place.)How can I get the NVIDIA chipset back up and running?
View 6 Replies
View Related
Jun 30, 2009
I installed Win 7 sometime around Feb, a dual boot with Win XP. But when I upgraded Win XP to Vista, the option for Win 7 disappeared on the boot screen, and the system would boot straight into Vista. So, I used the Startup repair option from the Win 7, and after rebooting it showed the boot screen with W 7, and Vista. But, after I "repaired" it, Win 7 seems to have lost the Win 7 startup screen. It now shows the "Starting Windows" from Windows Vista, then the Win 7 "welcome" screen.
I realize it's not much of a problem, but is there any way I could get the Win 7 startup screen back?
View 1 Replies
View Related
Mar 9, 2010
This doesn't work. Very irritating.(I don't know if this RealTek sticky at the top of this forum is a solve for this, I'm not hot on registry changes and I'm not sure if this is a fix for this issue.)Firstly I have to turn off the front-panel detection in order for the front panel to be detected..?Secondly, I can't get the speakers to mute when the front phones are plugged in. I can do a manual switch from one to the other, but the front panel won't detect when things are plugged in.
View 9 Replies
View Related
May 7, 2012
Reinstalled Windows 7 pro 64-bit for my friend's PC but after Windows updates the Search ( search programs and files ) the line under All Programs has disappeared ((
this is a screenshot from my computer to explain better what I am talking about
View 1 Replies
View Related
Dec 13, 2012
I have a Realtek built-in sound card. I've got a GA-990FXA-UD3 GIGABYTE mobo, and that's all I'd think matters.It was working a little while ago (Yesterday) with no problems.When I got home, the little speaker thingy on the bottom right had an error thing next to it.So, I looked in the volume settings to check stuff out, and but when I click "OK," it goes back to the lonely, empty, no speaker'd room.
View 7 Replies
View Related
Jan 15, 2013
I just realized that stereo output is inverted (L&R are swapped) on my Realtek front panel headphones connector and on my M-Audio Firewire card. Output is OK on Realtek rear main/front speakers connector.
View 1 Replies
View Related
Oct 1, 2011
I am using Sony Vaio VPCEB11FX laptop with windows 7 64 bit OS. now the problem is 5.1 speakers are not working on my laptop. 5.1 surround speakers option does not show in "sound and hardware " in " control panel". so pls tell me how to set up 5.1 speakers on sony vaio VPCEB11FX having windows 7.
View 2 Replies
View Related
Oct 28, 2012
I'm trying to hook up my TV with my computer, and for the most part it's working. The video goes through and I get how to control it and everything. The only thing not working is the sound.
I'm using an HDMI to HDMI cable, and like I said the video is fine. Also, when the cable is plugged into my boyfriend's laptop, the sound comes out of the TV.
So this must mean the problem is with my computer specifically. Although, this computer is only a month old, so I wouldn't think anything is out of date.
View 2 Replies
View Related
Mar 31, 2012
I've recently switched to Digital Audio (S/PDIF) (High Definition Audio Device) using one Toslink cable instead of all the analog wires going from my PC to my receiver.The digital sound is amazing, CD quality from my PC is great.However, I now also receive the digitized sound of pages being loaded as I surf the web. All sound comes out digitized when loading a new page.Is there a way to stop this from happening while listening to music or course material without gong back to analog?Can I have my digital CD quality and enjoy it too!
View 1 Replies
View Related
Feb 7, 2011
In my laptop existing OS is Windows 7 Home Premium x64.
Hardware config is
HP i7 Quad processor 1.7 GHz.
4 GB DDR3 Ram,
500 GB HDD.
My system perf is slow. I installed few softwares. I have deselected most of the startup services and programs from msconfig. Eventhough my system bootup time is slow, and whenever i open mycomputer it taking time to load.
I have decided to install Windows 7 Enterprise Edition x64 by formatting my C drive. But there is no option while i do clean install.
View 5 Replies
View Related
Feb 20, 2012
i have downloaded realtek hd audio driver R2.67 from realtek website. but i need realtek hd audio manager. is realtek audio driver and manager are same?
View 1 Replies
View Related
Aug 13, 2009
I am looking for a digital clock gadget. Please reply soon.
View 9 Replies
View Related
Dec 27, 2009
I am trying to use my digital concepts cr-70r card reader in Windows 7 and it is not being recognized. Anyone know of an available driver?
View 6 Replies
View Related
Nov 25, 2010
what is "Programs digital signature"? According to my knowledge some security software categorize programs trustworthiness using program digital signature. How do program developer get digital signature? Why some programs not have digital signature?
View 2 Replies
View Related
Jan 1, 2012
I have a HP Slimline PC and a SyncMaster 2343(BWPlus/BWXPlus)(Analog) Monitor. The monitor two connection options. It has a standard VGA & DVI-D Single Link. The PC only has the VGA(BLUE)connection. If I use an adapter,(DVI-D single link male 18+1 to VGA female) will my monitor then switch to digital?
View 2 Replies
View Related
Nov 21, 2009
As I posted in the monitors forum, I am having problems with a new LG W2053 TQ monitor. Being used with a new HP Pavillion Elite PC. Great picture, but just can't get any of the OSD or configuration screens to appear.
It has those touch sensitive buttons on the front. Have tried everything, but they never appear on the screen no matter how I press them (quickly, tapped, held for several seconds, etc.)
Other than that, the monitor is great.
Have it hooked up with a DVI-D cable for a digital connection, rather than VGA.
Was wondering if perhaps to get these OSD screens to appear, the monitor needs, and uses somehow, the analog VGA cable for this. So, thought I'd give it a try. Now have both cables in place.
But, I'm reasonably sure that the PC is still using the DVI-D digital cable for its output to the PC. Looked in all (I think all) the monitor related screens in Windows 7 but can't find where it is.
a. Is there an option in Windows 7, somewhere, to tell Windows7 which to use, and to switch the output spigots between VGA and DVI-D going to the monitor ?
b. Or, any thoughts as to why the config OSD screens won't appear would also be most appreciated.
View 9 Replies
View Related
May 11, 2009
I upgraded a desktop and laptop from Vista Ultimate to Win 7 RC and have the same problem on both. I can't install programs, run msconfig, cmd, regedit, etc, because I receive a digital signature error that is supposedly related to a recent hardware or software change. I can't even edit the properties of the accounts because of this same error.
Interestingly enough on my laptop one account shows a blank programs list when you go to start-all programs, but on the other account they show up. I restored the desktop from my windows home server and will shortly do the same on the laptop if I can't figure out this problem.
View 6 Replies
View Related
Jan 11, 2012
I was recently forced by my provider to change from analogue to a digital service. I received two basic analogue to digital converters and have them setup on media center (Windows 7). I have IR blasters going from the back of the USB MC dongle to the front of the 2 digital boxes. Problem: I can browse channels no problem when not recording anything. As soon as I begin recording a channel and change channels, it switches over to the second digital box/tuner but it won't change the channels. Media center seems to think it's changing but the instructions never make it back to the digital box. It's like it's never activating the second IR blaster. I switched some of the hardware around to no avail, same results either way. Both digital boxes are identical and both remotes worth with both boxes.
View 1 Replies
View Related
Nov 26, 2012
I am trying to add a public digital signature in word but am unable to do so. when I try to protect the document and go into 'protect document' --- 'add a digital signature' and selct change to change the signature it only displays my local signature (myemail@company.com) I would like to use a different signature like a public or trusted signature.
View 1 Replies
View Related
Sep 24, 2012
Downloaded Adobe Digital to load Kobo. Downloads fine, but gives Run error looking for Administrator. When i go into control panel, shows me as administrator. Tried all my passwords, not valid. What am i missing?
View 2 Replies
View Related
