I need to run FTP server with default port 21 and looking to run Counter Strike 1.6 server with port 27015 and im try all what you discuss in this forum about open ports in firewall and im disable the firewall and still cant access the FTP server and CS 1.6 server from out side.
View 3 RepliesThrough my uni halls, the internet provider provides their own tv service (basically identicle to freeview in the UK for chanel choice) this is iptv.
Now with Windows 7 I can't seem to play it, there trouble shooting doesn't include Windows 7 yet but both for xp and vista it talks about opening port 1234.
How do I do this?
I found a guide on here telling how to access ports but I didn't know where to go after that for a specific.
Any other ideas to try and make it work, if this one doesn't? It worked last year on xp 64bit.
Just wondered if there's a way to open 2 ports via UPnP (specifically 113 and 3389) on startup, as my silly router refuses to give my computer the same IP every time. Yes, I know I could set my IP as static locally, however, I move my computer to various locations to "share" things?
View 3 Replies View RelatedI recently installed new software that requires port 8080 to function. When I try to run the software I get an error that port 8080 is being used.How do I check to see what process is using port 8080 so that I can open up the port to run the software? MACHINE: Windows 7x64
View 9 Replies View RelatedI just bought a new computer from a computer shop. It is custom built and has the following:Has 8GB RAM, 3.3ghz intel core i5-2500k, windows 7, Intel HD graphics so upto 1.7GB max video memory, 1 VGA slot, 1 DVI slot.Just to confirm I checked in person and my tower has a VGA port and a DVI-D dual link port.
View 3 Replies View Relatedim having the port error of 01.
View 3 Replies View Relatedmy 2 no usb port and lan port are not working other wise other 1 no usb port working this is new laptop i think driver not installed because when i connect the pendrive there was light showing in my pendrive.so i want drivr
View 2 Replies View Related,opening any icon , opening default programming
View 1 Replies View RelatedThe word document is opening in Windows xp why not opening properly in windows 7
View 2 Replies View Relatedok well i spent about 3 hrs and i know its not my router and its the os and i did a fresh install too im on 7600 rtm, now i got windows firewall and defender disabled, i got nod32 antivirus not with a firewall just the anti, now i got utorrent, so i use utorrents port checker, the port works for it but if i add a port to my portforwarding on my router it dont work, according to this port scanner, now if i enter it and use it as my port in utorrent it works! but anything else doesnt i dont get it i got windows firewall disabled and all that i literally think theres a hidden firewall or a virus but i know there isnt a virus i also did a scan incase so any ideas?
View 1 Replies View RelatedI literally cant press the "change settings" button in windows 7, (im using windows 7 RC), its dull and theres nothing i can do, trying to connect to spore if your wondering.
View 3 Replies View RelatedMy computer crashed about a month and I want to format it. When I plug in the keyboard to go into bios it does not work. if i plug in anything at all it doesnt work, every usb port that is.
View 5 Replies View RelatedLast night my new laptop arrived (XPS), still getting used to windows 7 etc... but i thought i would watch something through my t.v. Plugged HDMI cable in back of laptop straight in to t.v, changed the source and straight away i had a lovely sharpe picture of my deskop instantly.... or so i thought
im getting the middle part of my screen fine - but it is cropped so i cant see the tool bar (its too low) and the desktop icons are only veiwable if i move them closer in screen! Ideally i want to have identical screens on both so i can use both at sam time, but currently i can only view either or atm? and the t.v one being crop means i can use it as a computer (No toolbar etc..)
I could figure this out on XP but windows 7 seems beyond me atm!
I have some crazy problem with port 80 . Everything was fine since last 5-6 days. When i try to connect to some pages i get this note on picture.
i tried every posible browser and same thing ! also tried disabling firewall and nothing ...problem is still here! this is only one of many pages that i cant load.
To all the computer geniuses out there, I guess this isn't a windows 7 problem but it's about drivers.I have an Asus K53E-B1 with Windows 7 64bit. It comes with 3 USB 2.0 ports and that's it. I went on the Asus website today and found USB 3.0 drivers update.I can't just download those drivers and use them and expect USB 3.0 performance when I have USB 2.0 ports right?
View 4 Replies View RelatedI just installed Windows 7 and updated all my drivers. I am missing two drivers, and I don't know what they are:
PCI Serial Port
PCI Simple Communication Controller
What exactly are these? I own a Lenovo X200 Tablet. Any ideas where I can find the drivers for these two things?
I have a quick question about the USB ports on my computer. I have a screenshot hosted here on Flikr: USB | Flickr - Photo Sharing! Of the 5 USB's that are listed, one is a USB2. Is the USB2 Enhanced Host Controller a USB2.0 port? I am looking because I am going to buy an audio interface and if I have a 2.0 in there then I will get something a little better 'cos I want as little latency as possible when recording vocals.
There is one other thing also, if it turns out that there is a 2.0 port, is there a way to physically differentiate which port is the 2.0? I have 3 USB's on the back and 2 on the front of my tower. At the moment I don't know which is which and do not know what to physically look for when I look in or out of the case.
I have an application to control external devices via IRDA.The application only accepts IRDA connected via a serial port.I only have a USB-IRDA device.
Is there any freeware driver/software to create a virtual serial port and link it with the USB device?
is it impossible to open a port in mobile broadband with HUAWEI E156G ?
View 7 Replies View RelatedNew PC has a 1394 Port.
Familiar with the USB Ports of course, but have never used a 1394 Port.
What and where is it used ?
For what ?
What devices should utilize it ?
And whatever else I'm not sharp enough to know to ask about these Ports, please ?
I use my computer aboard a 47' Sailboat primarily for navigation and communications. As such, I run multiple external devices. To name a few:
WiFi Cards (2)
GPS
Pactor Modem
Iridium Satellite Phone
Verizon Aircard
Telcel Aircard
You get the picture. I was unable to accomplish a very simple task using VISTA, to wit, being online with my Verizon Aircard and using one of the WiFi cards to access my wireless printer.
I finally downgraded to Windows XP and this is never a problem anymore. A Verizon tech once gave me an explanation of why this couldn't be done in VISTA, but unfortunately the explanation went over my head.
Does anyone know if this problem has been fixed in Windows 7, or does that OS have similar problems as VISTA handling multiple communications devices operating simultaneously on different USB ports?
I have spent the last two hours trying to open a port for a remote control application.
I have tomato 1.27 running on an asus wl500gP router.
I am running windows 7 ultimate
i have an Arris voip modem through comcast
The problem is this, i forwarded the port correctly in tomato yet the port is still closed. I have tried the following:
Enabling DMZ
Disabling windows firewall by either the control panel or through services.msc
Enabled UPNP in the application, it opens the port according to tomato yet external port testers still say its closed
reset the router and pc numerous times
hard reset the router
Hooking PC directly into cable modem
I believe that this is strictly a windows 7 issue now as the router is out of the equation. The only security software I have is Avira free edition, windows defender, and (disabled) windows firewall.
Can anyone give me help as to why I cannot open a port? It would be greatly appreciated as I am leaving for a trip in 36 hours and would like to be able to remotely control this application.
I tried to change the default remote desktop port from 3389 to some other 4 digit number.
I did this via regedit
HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Control Terminal Server WinStations RDP-Tcp
I setup that port correctly as a port forwarder in my router. The original 3389 was working fine. However, the new 4 digit one is not strange enough (port forwarder is 'ok' according to one of those port forwarder checking sites). I tried to RDP from one network to my IP (confirmed correct) like this:
myipaddress:1234
1234 = being the actual port number I set up.
Of course, I do already have RDP enabled on both Windows 7 laptops.
What could be the cause of the invalid connection? It was working fine on 3389 by for extra security measures, I changed it to something else. I did restart the laptop as well.
if i plug my mic into my sound port its fine but cant change volume without changing volume on the device or on the computers master volume... if i check listen to device (so i get the volume control) i get an echo... is there any way to get rid of the origional sound? not the one that i can control
View 1 Replies View RelatedIt's been a while since I've gotten my sound "working," but my current problem is that only one of my audio jacks work, one on the back. I know it's not the hardware because it used to work on vista. It hasn't been that much of a pain because i didn't have to change often between audio output devices, so i just dealt with it- getting back behind the computer and switching out cords. Now i'm doing it a little more frequently, so I can still just deal with it, but if anyone here does know something that may help, it would be very nice of you to let me know.
View 7 Replies View RelatedIm using windows firewall (Windows 7 build 7264) and Vista Firewall Control before everything was okey but after i changed my router(New one Inteno) shows in Firewall test (Shilds up) port not Stealth (Failed)few ports open and Max.shows Close and i don't know how to fix it or configure it
any advice ?
I’m using windows worms dors cleaner tool to close ports , these ports ( 137 , 138 , 139 , 135 and 5000 ) , successfully closed but i can’t close port 445 , so please tell me how to close port 445 .
View 5 Replies View RelatedWhat are ports?
What is TCP and UDP?
Can we delete certain ports safely?
Because I was using NIS2010 and I had enough of it. I uninstalled it. I even ran the Norton Removal Tool. But there is still traces of it. Ports. I dont want to be connected with or through Symantec whatsoever can anyone help me out please.
How I can close port 135? Any way to close it without program.
View 2 Replies View RelatedI have a port that remains allocated (Port 5150) after removal on some software and now thta I wish to install an upgrade it tells me that the port is already allocated.
Is it possible to release it so I can install the upgrade tot he same port?
my keyboard and mouse is usb type but unfortunately all usb port is disable so ican not login my computer ?
View 1 Replies View Related