I start Windows after the machine being off for a while, maybe a day or two, the primary monitor setting changes to my secondary display. As I do actually have two monitors on the video desk, it is fairly easy (for me) to change the setting to what it needs to be. But I am not the only operator that uses this computer, and most of the volunteers know little when it comes to computers of any kind.
Now you would think that someone with my technical background would have been able to fix this issue, and I can...using a 3rd party solution that costs money.
edit: to clarify, I have been having this issue for few years, but I have been the only person using the system. And this was happening on previous systems as well
Specs of the system in question:
Custom Built Desktop;
Windows 7 Professional x64;
I recently had an older HP Pavilion Media Center m7760n Desktop PC rebuilt. The old power supply fried the motherboard so I need to get a new power supply and motherboard. Here are my current specs.
Mainboard : Asus P5QPL-VM EPU Chipset : Intel G41 Processor : Intel Core 2 Duo E6420 @ 2133 MHz Physical Memory : 2048 MB (2 x 1024 DDR2-SDRAM ) Video Card : Intel(R) G41 Express Chipset (Microsoft Corporation - WDDM 1.1) Hard Disk : WDC (1000 GB)
[code]....
As you can see from above, the "video card" is actually integrated into the motherboard.The computer works perfectly except for one major problem. I have 2 monitors, one is 22" with 1680 x 1050 resolution and the other is a 15" monitor with 1024 x 768 resolution. At the back of my computer I have a VGA port and a DVI port. The 15" is connected to the VGA port and the 22" is connected to the DVI port.When first starting the computer, the 15" monitor was recognized as the primary monitor while the 22" was recognized as the secondary monitor. No problem. I simply went to the display settings and set the 22" to be the primary monitor and the 15" to be the secondary monitor. Unfortunately, this setting seems to reset as soon as I reboot the computer. The 15" is always set as the primary monitor on start up, forcing me to set the proper settings all over again. What's worse is that even after I have set the proper settings, they sometimes revert back when using Media Center or other programs. Worse yet, sometimes the monitors both go completely black ... as if the monitor settings were about to switch but got locked up some how.I'm assuming that perhaps the on board video has a primary port (VGA) and a secondary port (DVI) but even still, shouldn't Windows 7 be able to over-ride this and save these settings so that the monitor settings remain the same during startup and regular usage?
So, I want to have Windows 7 Home Premium 86x and 64x versions installed on my PC with dualboot. I have 86x version of Windows 7 installed already. So, for 64x version, I have to create a new partition. The problem is, I already have 4 primary partitions, so I can't create a new one (I read somewhere that Windows have to be installed on a primary partition). Here is the picture: (Don't mind disk 2, it's just the external drive).
If I try to create a partition on "Unallocated", Acronis Disk says this:
My question is, which of these partitions on disk 1 can I safely convert to logical? If I am wrong here and I still won't be able to create a new primary partition for Windows to be installed on. I'm really not so good at this things.
I'm currently running a primary disk for my system drive on windows 7, with two other 1tb drives for saving data set to raid1(Mirror each other ). However my primary disk has problems and need to be upgraded.Would I need to reformat the two mirror data drives before i do the upgrade in order to ensure the raid 1 is working
I just finished upgrading my CPU, ram, and mobo, and everything went off without a hitch. Except that now rage won't play on my default monitor. Other than the hardware, nothing has changed with the setup. All my other steam games play on the default monitor but Rage. I'm at a loss here. As windows sees them, monitor #1 is my secondary monitor and #2 is my primary. For a video card I have an XFX 6870 Black edition. I updated my drivers and Catalyst Control center to the latest versions, after experiencing crash issues with rage, so my drivers are all current.
Of course, it is easy to get a print screen of my primary monitor, but how do I get one on my secondary? Simply clicking on it's background doesn't work.
I'm using a Sager 3790 notebook with 2 GB of memory, a Centrino 1.7 Ghz and a Mobility Radeon 9700.Installation went perfectly. The card was detected by Windows Update and drivers were isntalled for it. They're from December 2008. Okay, that's fine and dandy.As soon as the drivers install the highest resolution available on the primary display is 640x480. Why? Because Windows won't/can't detect my primary monitor. It shows up as an "Unknown display device."I can attach an external monitor and adjust its resolution all day. I can also remote into the laptop and that works fine.I am nearly 100% confident that I cannot change the display resolution because the monitor won't detect correctly. I can't manually force an install of a monitor or change the "Unknown display device" driver because that section is grayed out in the "Advanced Settings" under the Display Resolution tab.
Some background first. I have three 1920x1080 monitors. The central monitor is Landscape. The two side monitors are portrait, used for working with web browsers, code, communication.I find it easer to deal with large amounts of text in portrait, where I can continuously track a lot of text without tracking back and forth across the entire width of a widescreen monitor.So, I'm trying to set a background. It works fine.It's abstract-ish, so I set the 'stretch' option.That works fine on the central monitor.On the two side monitors, the image is compressed between the left and right sides of the screen, but does not stretch to reach the top or bottom of the screen. The extent that they seem to extend up and down seem to exactly match the dimensions and alignment of the central screen. If this is so, then it would mean that on the portrait monitors, the background is filling a 1080x1080 block in the center of a 1080x1920 display.The only thing that functions properly is 'Tile'. None of the other options seem to produce any change in the image displayed.
I run a dual monitor setup, and I use two user profiles and switch between them throughout the day. I set up both user profiles identically, which is as: In each profile, I run multiple instances of Internet Explorer 9, so I have four or five Internet Explorer windows open with multiple tabs open within each window. I keep two IE9 windows open on my left monitor, and three open on my right monitor. I also have MS Word and MS Excel open on my left monitor, and two notepads open on my right.
When I click on Start and switch user accounts, if I go back into my first user account, my windows will have either moved off screen somewhere, or they will have moved to the first monitor. The behavior is inconsistent in which windows are shifted around, but the windows end up moving none the less, and it ruins my work flow. I spend all my time setting up the windows back to their 'correct' positions.
Switching users to the 2nd user account will cause the same consequences with the windows set up on the 2nd account, thus defeating the purpose of utilizing multiple profiles to make work more efficient. I recently switched to Windows 7 on a new computer. My "old faithful" has Vista 64 does not exhibit the window shifting issue.
I am running a new 2nd gen sandybridge system, with an asus h67 motherboard and an i7-2600. I have 16 gigs of ddr3, and Win 7 64 Home Premium. I have an ATI Radeon HD 6570 running both monitors, with the latest video drivers installed. I've encountered this issue with and without ATI Catalyst suite installed and with/without Ultramon installed.
I don't want to revert back to Vista 64 just because it will be a lot of downtime to install and transfer my profiles again on the new machine, and I'd like to stay on the most current OS regardless, but I may have to switch back to Vista if this is a known issue on 7. We use dual monitor Windows 7 setups at the company I work for (my day job), and Ive verified 3 of my coworkers also have this issue. I also replicated this issue myself on one of the work Win 7 comps.
I recently updated my nVidia drivers to the latest and also my SiSandra Lite software (for quick access to accurate specs of my PC). After updating SiSandra Lite, I looked at the GPU section. As usual it loaded the primary monitor first where everything was fine. I then changed to look at my secondary and my primary monitor turned off and my desktop was shifted to my second.Now when I boot my computer, my primary comes on, but after the pre and post bios. Only when Grub comes on does something appear on my primary monitor, but it's very low resolution (compared to what it used to be). The windows 7 loading bar appears on my primary but before the logo can appear and glow, it swaps to my secondary monitor where it stays.
Windows 7 cannot detect my primary monitor trying both screen resolution detection and it's missing from the devices menu. Really confused about this whole business.I realise this may have been posted as a problem before. I did find little snippets of information about it but nothing sufficient.
I recently purchased a new motherboard. After reinstalling windows, I noticed that my primary partition is also on my Storage Drive. Is there a way to change it back to only the SSD?
I have an ATI HD 6950 with 2 dvi monitors and 1 hdmi tv. Whenever I press the Win Key + P and choose "Computer Only" the picture goes to the hdmi output which is not what I want. I've tried messing with Catalyst trying to change the identities for the monitors but Computer Only option always goes to HDMI because it's identified as number 1. When I choose "Projector Only" the picture goes back to my 2 dvi monitors extended. How do I change this?
I want when I select Computer Only to only have picture on one of my DVI monitors and Projector Only on the TV Monitor.
I set the monitor resolution to 16800 x 1050 (recommened) with smaller text and it works fine. But when the PC is woken up from standby the resolution is now 800 x 600 with larger text, which is not what I wanted. How do I stop this happening, please? This is a new machine running Windows 7 home premium 64 bit with 22" Edge TFT monitor.
This all started whenever I wanted to change my text size different by changing my DPI settings. What I did was right click, go to screen resolution, and clicked on "Make text and other items larger or smaller". From this I changed it to 100% from 125%. I noticed it had changed my font size to the 100%. It then made everything SUPER small when I changed my theme settings.Whenever I right click and go into personalization settings, I do the usual customizing to my likings. Since I want to save the theme, I do so by naming it, blah. Now I want to use the blah theme by click on it, and I do so. Everything is fine and dandy until I right click my desktop to refresh(out of habit). This is the before and after of the font sizes.
Before After
My workaround was to set a custom DPI setting, log off like it prompts me to, then changing it back to 100%, again prompting to do so. It is so annoying to do so.
I have a three monitor set up. Whenever I open up a browser, either internet explorer or google chrome on monitors 2 and 3, after a few seconds it automatically drags my browser into my main monitor(monitor 1, where my start button and status bar is located)
I have a setup with 6 monitors. Today my main monitor broke and I couldn't find a way to shut the PC down since I couldn't access the main desktop to get to the Start menu.Is there a way to change which monitor is the main monitor without having access to the current main monitor?
I am running a dual monitor setup with my TV hooked up via HDMI to my laptop.
Everything was working fine before, I always had the laptop as my main display yet I could play a video or a game fullscreen on the TV.
Since a couple of days, as soon as I put something in fullscreen, it immediately goes on my laptop, regardless if it's open on my TV or my laptop. I don't remember changing/installing anything that could've changed that...
I checked a bit in the AMD vision software and the Windows control pannel but I can't seem to solve my problem without switching my TV as the main display. I also made a quick search on google as well as here but the problems were mainly with Flash, which isn't in cause here.
Here are my system specs:
Toshiba Satellite L75D Windows 7 home premium 64-bit AMD Radeon 6520G
I have just did a clean install of Windows 7 ultimate from XP and I am unable to get my dual monitors to work like they did in XP.
I have a DVI Radeon graphics card plugged into the agp slot, and a Nvidia geforce vga adapter plugged into a pci slot of my dell optiplex 755. When I am in the screen resolution settings the second monitor cannot be detected.
In bios I have 2 options under primary video adapter and they are auto, and onboard card. When set to auto the Nvidia card gets a signal but the Radeon does not. There are no conflicts in the device manager, and all of the drivers are up to date.
When I change the bios option to onboard card the Radeon adapter gets a signal but the other monitor cannot be detected and in device manager there is a yellow exclamation mark next to Standard VGA adapter and a code 10 error that states the device could not be started.
I have powered down, and unplugged every cable, I also tried to use the integrated VGA adapter to the Intel G31/G33/Q33/Q35 Graphics Controller but the computer will not even boot. I get
"System Halted
Attention Unsupported Video Configuration Detected"
I have two monitors, both work fine as standalone but Windows will not detect either as a secondary.
Please help me someone, I am so used to having my helpdesk email open in one monitor and all of my other work in the other monitor.
My disk crashed and had to reload everything, I took it to Toshiba service center. Before the crush my hard disk was just one big physical disk now I have: C: physical 150.84 GB(boot, page file, crush dump, primary partition)If so can you please tell me how to do it, never done this before, partitioning, and I don't want to make a mess out of it.
Any good guide or book I can read for SSD's. I wanna learn which one to choose, how to install. Wanna use it as a primary drive for the OS, and have a secondary drive. How to setup my OS and computer to do that.
I have two primary partitions and I want to delete one of the and completly expand the other. When i get in my computer/manage/disk management if i right click a partition it won`t let me le delete it or expand it. How can I have A SINGLE hard drive completly expanded ?
I want to format my D: drive to clear some space. Thing is my D: used to be my C: drive under XP when i was dual booting so its showing as an active primary partition and Windows 7 wont let me format it.
Ive tried deleting everything but some things are refusing to go (like the file boot which i assume is to do with dual booting).
Running out of space and I'd like to extend my primary (C) partition to the next drive (D) but in computer management D is listed as "Page file, Logical drive" and it will not allow me to delete it.
Would moving page file from D to E partition allow me to extend C into D? If so, how do I move page file in Windows 7 to another partition?
If I can't do this in Windows natively does someone have a suggestion on 3rd party software?
kay I am trying to make bootable USB so I can reinstall my Windows 7, but when I get to the step to create partition primary, it tells me there is insufficient space to do so. What's up with that? I really need to get my laptop back working before the 14th, because I am going up to my grandparents' house for the summer and would like to bring my laptop with me. I also don't want them to find out I broke it so...heh.Also, I've tried burning the ISO to a 4GB DVD disk with ImgBurn but every disk I do gives me an error, and I only have 3 DVDs left and I don't want to try again because I don't want to waste them. I actually just went out to buy this USB so I'm really upset that I'm having issues with it
At the end of each semester, I typically restore my primary laptop (Asus G1S) to the factory default settings. I realize that this isn't technically necessary, but there's something psychologically pleasing about a freshly installed operating system. It's somewhat like returning to a hotel room in the afternoon after the maid has tidied up. The bed is made, the bathroom is stocked with clean towels, and the free water bottles have been replenished.
I'm currently downloading the Windows Seven installation files, and have been reading through various guides. Many writers recommend partitioning one's hard drive to permit a dual boot. However, since I've just restored my system completely, I would rather just turn the entire thing over to Windows 7 without any Vista remnants clogging up the machine. If things go south, I can always unpack the restore disks and revert to the factory default state.
Is this advisable and possible? Can I completely wipe out Windows Vista and turn my machine entirely over to Windows 7?
This computer is running an ATI Radeon HD 2400 Pro. It does support dual monitors...(I've had dual monitors active on this card before, but never on Windows 7.) But since installing windows 7, I can't even get it to detect the second monitor. I want to run the setup with the CRT as the primary monitor and the HD as the secondary.
I recently got a copy of Warhammer Dawn of War II. The game seems to be consulting" dxdiag.exe when I adjust the graphics detail of the game.Here is the problem, dxdiag when launched insists on displaying my secondary Intel GPU. My laptop has switchable graphics, but even if I force the usage of the primary Nvidia GPU (GT540M) through the Nvidia control panel it still detects the Intel one.