Background Picture Position Respected Only On Primary Monitor?
Dec 13, 2012
Some background first. I have three 1920x1080 monitors. The central monitor is Landscape. The two side monitors are portrait, used for working with web browsers, code, communication.I find it easer to deal with large amounts of text in portrait, where I can continuously track a lot of text without tracking back and forth across the entire width of a widescreen monitor.So, I'm trying to set a background. It works fine.It's abstract-ish, so I set the 'stretch' option.That works fine on the central monitor.On the two side monitors, the image is compressed between the left and right sides of the screen, but does not stretch to reach the top or bottom of the screen. The extent that they seem to extend up and down seem to exactly match the dimensions and alignment of the central screen. If this is so, then it would mean that on the portrait monitors, the background is filling a 1080x1080 block in the center of a 1080x1920 display.The only thing that functions properly is 'Tile'. None of the other options seem to produce any change in the image displayed.
I have discovered a frustrating problem when i attempt to customise my desktop background. While i have had no problems selecting the desired images or an problems with the slideshow itself i an unable to alter the picture position, meaning that the picture position is permanently on stretch which distorted the pictures. I select Centre from the drop down bar and then save the changes but it makes no difference, the pictures remain stretched and when i re-open the Desktop Background menu the Picture Position has reverted to Stretch
I recently had an older HP Pavilion Media Center m7760n Desktop PC rebuilt. The old power supply fried the motherboard so I need to get a new power supply and motherboard. Here are my current specs.
Mainboard : Asus P5QPL-VM EPU Chipset : Intel G41 Processor : Intel Core 2 Duo E6420 @ 2133 MHz Physical Memory : 2048 MB (2 x 1024 DDR2-SDRAM ) Video Card : Intel(R) G41 Express Chipset (Microsoft Corporation - WDDM 1.1) Hard Disk : WDC (1000 GB)
[code]....
As you can see from above, the "video card" is actually integrated into the motherboard.The computer works perfectly except for one major problem. I have 2 monitors, one is 22" with 1680 x 1050 resolution and the other is a 15" monitor with 1024 x 768 resolution. At the back of my computer I have a VGA port and a DVI port. The 15" is connected to the VGA port and the 22" is connected to the DVI port.When first starting the computer, the 15" monitor was recognized as the primary monitor while the 22" was recognized as the secondary monitor. No problem. I simply went to the display settings and set the 22" to be the primary monitor and the 15" to be the secondary monitor. Unfortunately, this setting seems to reset as soon as I reboot the computer. The 15" is always set as the primary monitor on start up, forcing me to set the proper settings all over again. What's worse is that even after I have set the proper settings, they sometimes revert back when using Media Center or other programs. Worse yet, sometimes the monitors both go completely black ... as if the monitor settings were about to switch but got locked up some how.I'm assuming that perhaps the on board video has a primary port (VGA) and a secondary port (DVI) but even still, shouldn't Windows 7 be able to over-ride this and save these settings so that the monitor settings remain the same during startup and regular usage?
I've had this issue for a couple of weeks now and although it appears minor - I have a feeling there could be an underlying issue. It's now impossible for me to set my background image as anything apart from a solid colour. I've tried many different pictures and after saving the changes, nothing in effect is saved or changed. Is this a straight forward fix or am I in need of a virus scan? I do have McAfee however a recent scan had negative results (and yes the scripts were up to date)
Why is my desktop background picture removing when i open some programs , put laptop on sleeping mode or turn it of ? Copy of my Windows is not genuine
I start Windows after the machine being off for a while, maybe a day or two, the primary monitor setting changes to my secondary display. As I do actually have two monitors on the video desk, it is fairly easy (for me) to change the setting to what it needs to be. But I am not the only operator that uses this computer, and most of the volunteers know little when it comes to computers of any kind. Now you would think that someone with my technical background would have been able to fix this issue, and I can...using a 3rd party solution that costs money.
edit: to clarify, I have been having this issue for few years, but I have been the only person using the system. And this was happening on previous systems as well
Specs of the system in question: Custom Built Desktop; Windows 7 Professional x64;
I just finished upgrading my CPU, ram, and mobo, and everything went off without a hitch. Except that now rage won't play on my default monitor. Other than the hardware, nothing has changed with the setup. All my other steam games play on the default monitor but Rage. I'm at a loss here. As windows sees them, monitor #1 is my secondary monitor and #2 is my primary. For a video card I have an XFX 6870 Black edition. I updated my drivers and Catalyst Control center to the latest versions, after experiencing crash issues with rage, so my drivers are all current.
Of course, it is easy to get a print screen of my primary monitor, but how do I get one on my secondary? Simply clicking on it's background doesn't work.
I'm using a Sager 3790 notebook with 2 GB of memory, a Centrino 1.7 Ghz and a Mobility Radeon 9700.Installation went perfectly. The card was detected by Windows Update and drivers were isntalled for it. They're from December 2008. Okay, that's fine and dandy.As soon as the drivers install the highest resolution available on the primary display is 640x480. Why? Because Windows won't/can't detect my primary monitor. It shows up as an "Unknown display device."I can attach an external monitor and adjust its resolution all day. I can also remote into the laptop and that works fine.I am nearly 100% confident that I cannot change the display resolution because the monitor won't detect correctly. I can't manually force an install of a monitor or change the "Unknown display device" driver because that section is grayed out in the "Advanced Settings" under the Display Resolution tab.
I run a dual monitor setup, and I use two user profiles and switch between them throughout the day. I set up both user profiles identically, which is as: In each profile, I run multiple instances of Internet Explorer 9, so I have four or five Internet Explorer windows open with multiple tabs open within each window. I keep two IE9 windows open on my left monitor, and three open on my right monitor. I also have MS Word and MS Excel open on my left monitor, and two notepads open on my right.
When I click on Start and switch user accounts, if I go back into my first user account, my windows will have either moved off screen somewhere, or they will have moved to the first monitor. The behavior is inconsistent in which windows are shifted around, but the windows end up moving none the less, and it ruins my work flow. I spend all my time setting up the windows back to their 'correct' positions.
Switching users to the 2nd user account will cause the same consequences with the windows set up on the 2nd account, thus defeating the purpose of utilizing multiple profiles to make work more efficient. I recently switched to Windows 7 on a new computer. My "old faithful" has Vista 64 does not exhibit the window shifting issue.
I am running a new 2nd gen sandybridge system, with an asus h67 motherboard and an i7-2600. I have 16 gigs of ddr3, and Win 7 64 Home Premium. I have an ATI Radeon HD 6570 running both monitors, with the latest video drivers installed. I've encountered this issue with and without ATI Catalyst suite installed and with/without Ultramon installed.
I don't want to revert back to Vista 64 just because it will be a lot of downtime to install and transfer my profiles again on the new machine, and I'd like to stay on the most current OS regardless, but I may have to switch back to Vista if this is a known issue on 7. We use dual monitor Windows 7 setups at the company I work for (my day job), and Ive verified 3 of my coworkers also have this issue. I also replicated this issue myself on one of the work Win 7 comps.
I recently updated my nVidia drivers to the latest and also my SiSandra Lite software (for quick access to accurate specs of my PC). After updating SiSandra Lite, I looked at the GPU section. As usual it loaded the primary monitor first where everything was fine. I then changed to look at my secondary and my primary monitor turned off and my desktop was shifted to my second.Now when I boot my computer, my primary comes on, but after the pre and post bios. Only when Grub comes on does something appear on my primary monitor, but it's very low resolution (compared to what it used to be). The windows 7 loading bar appears on my primary but before the logo can appear and glow, it swaps to my secondary monitor where it stays.
Windows 7 cannot detect my primary monitor trying both screen resolution detection and it's missing from the devices menu. Really confused about this whole business.I realise this may have been posted as a problem before. I did find little snippets of information about it but nothing sufficient.
I access my Internet via a wireless USB Modem Stick. Living in South Africa, Internet usage is sky high. I would like to know how to monitor my Internet usage. I.ow, which precise programs are running stealthily and eating up my data. I can actually see from my Modem Interface how the data is consumed.I would also like to know How do I use Wireshark to capture wireless traffic? Do I require an add-on card to do this?
I used to have folders with a display of pictures on the front. Now I have plain folders, when opened, they have an icon to click and the a large picture shows up. I would like to open the folder and see the thumbprints immediately. Toshiba Satellite running Win 7.
"Any know how to fix this issue? Running windows 7..Whenever I right click on a link to open in another window...the window opens at the bottom of the page...how can i configure it to open in the middle? "
[CODE]I've been getting this window when my computer starts up. It's a frame with the title "Microsoft.Net Framework." The message is as follows: Unhandled exception has occurred in your application. If you click continue, the application will ignore this error and attempt to continue. If you click quit, the application will close immediatelyCannot anchor balloon at position '(x=1489.y=766)' The point is not contained within the visible bounds of any screen.
One of the windows on the taskbar just switched position from being on the far left end of the taskbar to go into far right side of the taskbar. is this normal or is this some virus or something?
Something I like and can't seem to get Win 7 to do for me. I open a window for my computer, size it and set it at the upper left of my screen. I open folders in new windows; i.e. open the D: Drive and position it next to the window I opened for my computer. Close both. When I open my computer again it is now in the position where I opened the D: Drive. How do I get specific windows to retain the size and position I set each time I open them rather then simply pick up the size and position of the last window I opened?
I've been looking to Reset the default windows size and position of WMP12 (in the Center of the Screen without Maximizing) the way it is used to be when we launch the WMP12 after a fresh install of Win 7. I know there might be some way to reset it's default size and postion from Regedit (Just like we can reset the Internet Explorer size and position by deleting 1 binary value from HKEY User/Software/Microsoft/Internet Explorer etc. )
How can I change the position of the folder in Windows 7? Example: If there are three folder in the drive; Suppose the following names:
1 - A 2 - B 3 - C.
If I want to change their arrangement i.e: I want to place the folder C instead of folder A. But when I do it i.e:by dragging it. It says: Move to A. So how can i do it?
What is the rational (if there actually is any) of not allowing one to save window size & position (other than the last window opened)?
Without using a 3rd party program (which seems to be the norm with Win7) has someone found a way to allow saving resized windows other than the last window opened??
I'm having an issue when typing text. It occurs when typing emails in Google and when typing in Word documents. It happens whether I'm connected to the Internet or not. As I type, the position of the cursor jumps positions, either to a previous point in the text (which results in text being inserted at this earlier point in the doc) or it jumps out of the text window compeltely (i.e. while typing an email or on Facebook). Does this sound like a familiar virus problem? what can I do?
We are all familiar with the fact that for people who dont use a single window in explorer that windows 7 removed much functionality.Window size, position and layout is not remembered anymore. For explorer and many application windows. I've been using a program called windowmanager since windows 7 was released, but the product only sometimes works and is extremely frustrating to get it to work properly and consistently. Now that upgrades are no longer available to me I'm looking around for something else.I remember reading here a couple of years ago about another product, but I can't find it. Does anyone know of such a product? Was it something MilesAhead wrote?
