Partition Not Showing In Windows 7?
May 14, 2012
I've a Hitachi 500GB SATA HDD, Windows 7 Ultimate 32bit. The other day i was just playing around with Disk Management and unintentionally right clicked on one of my drives and clicked "Rescan". The Disk Management did something for a while and then my PC restarted and that particular drive disappeared in my computer. Although I'm able to see the partition in Disk management but not in the list of volumes but in the bottom view of my disk. That partition does not have a Drive letter, I've tired to change the drive letter but it says "the disk management view is not up to date" I've tried some partition Manager software to assign a letter to my drive but all in vain. I've also found a solution to the error "the disk management view is not up to date" by updating my windows but that too didnt work for me. I've very important data on that drive and i really want it back. Tried every single thing googling around and used DiskPart in MS Dos also, nothing worked.
View 5 Replies
ADVERTISEMENT
Jan 7, 2012
As some of you may know i encountered the infamous "BOOTMGR MISSING" error which i could find no fix for and decided to do a fresh install of the OS.
Now at the Windows 7 Installation i selected the language and then selected Custom install and get a page asking which hard drive partition i would like to install the OS on. Now here is where somethings wrong. The only thing listed is the 100mb System reserved partition. How do i get the other partitions listed.
View 10 Replies
View Related
Mar 16, 2011
I don't know why this is happening. But all the files in my C partition(including WINDOWS files) take up only about 16.0 GB of space.But for some reason, it shows that 20GB Space is being used. So where did my 4GB Go?
View 12 Replies
View Related
Mar 30, 2009
*Insert token disclaimer about not knowing if this is the correct forum for this* It looks like it so I'll go with it.
I've got a problem that popped up the other night when I decided I wanted to restore my system to a previous time due to a BSOD I received and had a feeling it was due to CCleaner.
Regardless, I'm now unable to see my E: drive, as shown in the screenshot, on the left side of Explorer under Computer. It shows up fine in the main window there but not on the side. I can't even rename it, I had it named previously.
Any ideas?
View 7 Replies
View Related
Jan 20, 2013
I used Gparted to shrink the windows partition and create other partitions for a dual boot. Windows seems to be find except that disk manager does not reflect the changes, and defragmenter will not work at all?
View 3 Replies
View Related
May 15, 2012
i use cantrol panel for partition of my hard drive. after partition i restart my pc but it is black screen.
View 1 Replies
View Related
Mar 17, 2011
I installed partition magic to format a external HDD with the FS FAT32 since ps3 supports only FAT32 but to my dismay D: where I have all my data does not show up on explorer it shows up in disk management with the size of the disk 115.7 GB unable to explore add or change drive letter PS help..I installed recover partition and all the files shows up but I dont have an option to recover...
View 6 Replies
View Related
Jun 3, 2011
How to force format a flash drive? I have an 8gb flash drive and I plugged it in to a speaker that plays mp3 songs. But after unplugged it, my flash drive prompts "Please insert disk" and 0mb in my computer. I tried to view it with disk management and I saw its partition type was RAW.
View 6 Replies
View Related
May 18, 2012
I have a toolbar on my taskbar titled "Programs". It has about eight folders in it. I made another toolbar, and placed it directly adjacent to the Programs toolbar, to obscure the eight folders and force it to be a dropdown menu.Trouble is, as soon as I lock my taskbar, right next to the arrow that displays the eight items of my Programs toolbar in menu-form, one of the eight items is showing up as an icon, as if the other toolbar isn't close enough to the Programs toolbar in order to completely obscure the eight items.
View 2 Replies
View Related
Jul 1, 2012
When I installed Windows 7 on to my new laptop I think I did it on to the wrong partition as there is still a 30GB freedos one.Can I merge it with the partition Windows 7 is installed onto as it is getting full?I don't want to have to reinstall Windows again.
View 4 Replies
View Related
Dec 19, 2012
I'm building a new computer. Can I partition the hard disk, copy my laptop HD to boot from one partition and run a new windows 7 pro os from the second partition?
View 5 Replies
View Related
Jul 14, 2012
i protected password for my pendrive it is kingston 4gb then it showing 3.75b, but in properties it has been showing 576 kb how to get my original size (3.75gb)
View 1 Replies
View Related
Apr 10, 2012
I currently have a dual boot on my computer with Windows 7 and XP. Unfortunately as my computer is quite old my hard drive is not very big and with it being partitioned I am fast running out of disk space. So I tried to shrink the XP partition to allow me more disk space for Windows 7. Unfortunatley this would only let me shrink it by 83mb for some reason. I decided that since I barely use XP anymore that I would simply reformat the XP drive then try and merge them together. When I tried to format the partition it just gave the error "Windows was unable to complete the format". I then discovered in Disk Management that the Windows XP partition was the system partition which was causing the problem.
View 4 Replies
View Related
Jan 23, 2013
I install Windows 7 64 bit in a 60 gb partition of my HDD (C drive). I have about 200 GB free space in D drive. Now I want to make a 60 GB partition from the free space of D drive.
View 4 Replies
View Related
May 9, 2011
I created a 20gb partition on my external hard drive and no longer require the partition. It is currently unallocated space so I want to format it into NFTS. Using computer management the partition was selected and and I went through the steps to format but i keep on getting an error message saying there is not enough space on the disk to complete this operation.
View 1 Replies
View Related
Aug 29, 2012
I'm a long-time reader but new poster. I am currently running Windows 7. I want to install Windows XP onto another disc and have a dual-boot setup. I keep Windows 7 up to date and secure, but for the XP partition, I would rather not have antivirus running or even installed, in order to limit background processes. I will not be logging into any place or making any credit card purchases when booted into Windows XP. It will just be used for surfing, games, etc. Further, if and when XP becomes compromised or buggy, I will simply overwrite the partition with a backup image.
If I use Bitlocker to lock down the Windows 7 partition (with the encryption key on a thumb drive) and boot into Windows XP, am I correct in thinking the XP installation see or can't access the Windows 7 partition? If XP gets compromised, can a virus access or write to the Windows 7 partition?
Is there any other reason why this would not be secure? Can a virus write to the BIOS?
View 4 Replies
View Related
Jul 10, 2011
I wanted to create a new partition to try out linux. So I decided to shrink E: by 20 GB. I then formatted the free space into a new drive by right clicking and creating new simple volume. I was warned that the drive would be made "simple", but not knowing the implications, I went ahead with the procedure. Now on rebooting, windows won't load. I had made a repair disc, so was able to use it to check for any start up errors. It reported none. Moreover I used "diskpart" through cmd to find volume c: is dynamic.
View 1 Replies
View Related
Oct 19, 2012
I had my friend Dell Laptop. He want me to create a two extra partitions in existing primary partition which is C:The HDD is 1TB in size.One hour ago I had used Dell data backup program and created recovery discs and then formatted the Laptop to factory default. I thought before formatting it will give me options to create a partitions but it did not had any option.
View 6 Replies
View Related
Jul 1, 2010
I'm using Compaq Presario CQ40-627TUMy Laptop SpecIntel Dual Core Processor T4400 (2.2GHz, 80Mhz FSB,1 MB L2 Cache)- 2048MB 800MHz DDR2 Memory- 320GB 7200rpm Hard Disk Drive- 14.1' TFT WXGA High-Definition widescreen LCD panel with brightviewtechnologynd i'm using windows 7 Ultimate on boot system partition C, dual boot with linux mint. which mean i got four partition. one for linux mint. one for its swap space. one for windows 7. one for my data storage(movies,drivers,mp3,picture and etc).last few days i try to resize my C partition (120gb) to make it smaller to gain some unallocated spaces and resize the D partition because my D (almost 100gb) (ntfs/primary/data storage) almost full. i use easeus partition master v5.01.
After done resizing and restart i can't see any D partition. so i was worried that my data will disappeared. i try to look for it but there is no Drive D even on the easeus or diskpart. the only drive appears was C Drive.i remove my Linux Mint and its swap (60gb) and thinking that i could get some more free space and do some cmd prompt windows 7 repair fixmbr thing to remove the grub. then i use partition recovery to transfer those missing data from partition D to C Drive. (appears as unformatted)i try to use partition wizard home to resize it back to 300gb. and it works. but i cant make a partition. it will disappear just like that.i also try to use diskpart,command prompt diskpard, and paragon. but also not working. the C drive was shrink but theres no unallocated space and no D drive (the new create partition). i try logical partition,primary,ntfs and fat but also not working. even the unallocated space also gone. i use almost 4 3rd party partitioning software but still got no luck with it.example:i divide 300gb into 2 partition which exist the C partition 150Gb but the other one gone. i wish theres other way than format. i also done many time. doing check disk, partition table doctor, searching for bad sector. but no errors with my hdd.
View 9 Replies
View Related
Mar 30, 2011
i recently installed windows 7.. it had only 2 drives c: and d: .. i need to partition d: drive into 3 partitions. is it possible?
View 4 Replies
View Related
Dec 18, 2012
I have Windows 7 ultimate 64-bit installed on DELL desktop (Optiplex 990) i7 Core. I have two HDD: Disk 0 contains the operating system 500GB. and Disk 1 empty 1TB.
I want to make a partition on disk 1 to mirror the operating system partition and keep the remaining for data storage. I tried to do but I had the following error message: "All disks holding extents for a given volume must have the same sector size, and the sector size must be valid."
I tried to attach a screen shot but couldn't.
View 5 Replies
View Related
Jul 24, 2011
I wanted to resize a partition, so I backuped all important files and booted from a vista PE CD. The program used is called "Easeus". After the resizing a message appeared, which told me that the system information couldnt be updated. After a restart, it - well, it didnt restarted. I tryed to format my C:Windows partition, but Easus decided to randomly format my linux partitin, too. Yey. After that i just formated everything, so i can create one big partition so this never happens again :P. To put it in a nutshel, there is no way to boot besides from booting from a cd. The diagnostic tool of the fabricator is giving me the "error code: BIOHD-3 No bootable drives detected" message.I tried to fix it with a win7 repair disk (just realized, that the disk is for 64bit, i have a 32 bit os - i think it doesnt matter, because there isnt any os installed at all). I used pretty much every "bootrec" command, sucessful, but no change. The startup repair gave this message: "the partition table does not have a valid system partition" diskpart - act isnt helping either: "The specified partition type is not valid for this operation."I dont know if i could install any os from a disk - i dont have a bootable installation cd/dvd. Because of that i would be happy if someone can tell me where i can find a free os and how i install it. From a os i can install my win 7.
View 1 Replies
View Related
Jan 14, 2012
I just cloned two partitions from a resident HDD to an auxiliary Momentus XL HDD in an enclosure that is connected to the computer via eSATA.Is there a way to compare each cloned partition with its original for integrity? If this were just a file, I'd use a unix/cygwin utility like diff or cmp.However, it is a partition.
View 7 Replies
View Related
Dec 29, 2010
I'm preparing a fresh install of Win 7 Pro on a 2 disk system (90GB SSD and 1TB HDD). I'll be placing the OS/Apps on the SSD and Data and image restore files on HDD.Qs:1. If I allocate ~60GB for the OS/Apps partition, and actual storage of the OS/Apps is 35GB...what size partition do I need on the HDD to save this image file? I assume the compressed file will be 45-50% of original. Will I want to store multiple image files created over the course of time as apps are added and system is further optimized, and hence need a partition that is a multiple of the OS/App partition size? What do you do?2. Also, an 8GB RamDisk will serve as scratch disk space for some apps (RamDisk +) which can save an image of the session's writes upon shutdown. I plan to save this image to the 2nd HDD. Is it recommended that I save this to same partition that stores the OS/App image in Q #1 above,
View 9 Replies
View Related
Mar 16, 2012
i have a hp laptap with a core i3 . with 8gig of ram. 500 gig hard drive. i made a 100 gig partion and it went to dynamic changing it back to basic. i read the mini tools application. if i tried that would it erase my hard drive if i went back to basic. all i wanted was a back up for my files.
View 1 Replies
View Related
Jun 6, 2011
Table top, Acer brand, Aspire M5700HDD: 500GBPart: 1. Hidden partition, 20GB, eRecovery2.Partition C partitioned by Acer, 240GB, OS3. Partition D partitioned by Acer, 240GBI plan to format both C and D partitions and make 4 partitions.So, check with Acer firstAcer's reply is confusing, saying that the hidden partition will be damaged if format C partition
View 9 Replies
View Related
Oct 22, 2009
I have started the installation process of windows 7 on a clean 1 TB hard drive. In order to ensure expediency of the read time of my primary drive, I choose the custom installation. When I did I partioned the drive as 250GB & 700GB. Hoever it also created a 100MB system partition on its own. It never did this in Vista. Is it suppose to do that?
View 2 Replies
View Related
Mar 27, 2011
I am trying to keep the size of Image Files as small as possible. I'm told that it helps to keep these files from getting too big if I move the Page File away from the drive being imaged - in this case , my C: bootable drive.
View 9 Replies
View Related
Dec 28, 2011
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
View 9 Replies
View Related
Jul 2, 2010
I recently acquired a 60GB SSD and want to migrate my current system hard drive to the new drive. However, when I go to the Windows Backup manager to create a system image, it wants me to copy ALL of C partition and ALL of D, when it should only be C.D drive is full of a bunch of crap that I do not want included in the system image.If there even are system files on D, by no means is copying the entire partition necessary!Therefore, is there any way to make partition D NOT a system partition?
View 1 Replies
View Related
Jan 7, 2010
I got a disk drive with 3 partitions...
1 - vista 64 (50GB)
2 - win 7 64 (30GB)
3 - data (80GB)
I want to move win 7 installation to vista partition and extend partition 3 with freed partition 2.
-I though to do this
-Backup win 7 to external drive
-boot from cd installation
-choose to restore win 7 in partition 1
-After it boots correctly, resize partition 3 adding partition 2.
I realized that boot files are in partition 1, when I tried in windows 7 to backup system (partition 2) it want sto backup full partition 1, because it's part of system and partition 1 is considered critical.
Any procedure to accomplish this?
View 4 Replies
View Related