So I reinstalled my copy of Windows 7 a couple months back cause it was getting cluttered w/ crap that I wasn't comfortable with. That includes the Removable Disk drive E: that one day decided to place itself on "My Computer". I have no idea what the hell it is or why it's there. I'm extremely pissed because recently i plugged in a jump drive that i shuttle between here and school and discovered 6 high-risk viruses on it...
[wayyyy to go on keeping our school's network protected... dumbass IT guys that our broke school clearly don't pay enough] Norton removed them but I can't help to think (maybe it's in my head) that my comp is getting touchier and slower. So where did this drive E: come from and why cant i "remove" this non existent peripheral. Should I be worried?
I have 6 PCs which I got off a friend who wound up his business. The machines are set up to logon to the old now none existent domain.When I switch on the machines the typical set up is this
CS-PC08 password:
I have no passwords, Switch user, none available, I do have an option to log on to another domain.
To Logon to another domain enter domainuser
To Logon locally it says, enter CS-PC08local user name
I have no password or user names.I cannot boot in safe mode or in safe mode with command prompt without encountering a logon screen.I have downloaded Password Unlocker and whilst this allows me to change passwords and add users I still get the same logon screen and none of my new user names or changed passwords help.I have no disks so cant do a reinstall.
As the title says, there is no OptionalFeatures.exe in my System32 folder. I recently let a friend of mine install 7 on my laptop (I have been on XP since its launch). I need to run networking from this machine to the other computers in the house (1 Mac and one on XP) to share files between, but I can't as there is no medium to do so.Is there any way to obtain a fresh copy of OptionalFeatures.exe without having to do a complete reinstall of the OS?
This is the first time am posting in this forum. Internet is working fine in my machine in wired modem as well as wireless wi-fi modem. But whenever i try to connect an USB modem data card for internet, it gets installed for mass storage alone and nothing gets installed for internet. And yes, the USB port works GOOD for all pen drives. This problem occurs only when i connect an USB data card and the following error message pops up. It doesnot buzz off till i remove the USB from the machinethere is no disk in the drive. please insert a disk into drivedevicehardrive2dr2..
I don't know if this is the right place to put this thread, anyways, When i open my disk drive it suddenly gets jammed and will not open until I slam my hand on the computer itself Is there something i should buy to get it unjammed or something?
I am installing a game cd. when i insert that particular dvd and when i try it to open manually a dialog box shows that insert a disk to g drive, and the computer is ejecting that disk. when i try with another cds or dvds it works properly
I have a generic System 7 64 bit system with a 1 TB SATA drive. It has one hard drive which I have partitioned into 4 partitions, with C: being where I put all the system software. The board has mulitple SATA ports.Change considered: cloning the C: partition onto a new SSD so that I can get the performance boost of an SSD. There are some heat problems with existing hard drive so I probably need to change it out, so I would also like to clone the D:, E:, and F: partitions to a new hard drive.I have cloned a single physical drive to another physical drive, and the software (Ghost, or the like) usually handles it ok, so that all I need to do is adjust some partition sizes, and then disconnect the old hard drive and everyting is good. This includes cloning a single hard drive with multiple partitions to being cloned to a new single hard drive with identical numbers of partitions.Compared to my prior experience, is there something different about cloning one partition only vs cloning the whole drive. My proposed plan is:
1) Install SSD 2) clone C: to SSD only 3) clone D: E: F: of old drive to new drive. 4) remove old drive.
My backup software's profile database is expecting to backup to H:, which was the drive letter for my external backup drive back in XP. This drive comes up in Windows 7 as K, because Windows 7 has given my four usb card reader drives the letters F,G,H,I.
Disk Management will not show these four card reader drives unless media is inserted (connected vs. disconnected). I have changed the letters for F,G,I to T,U,W, but only because I have those types of cards (SD, CF, MS)...I do not have an XD or SmartMedia card for the one dang drive I really need to change.
What are my options, other than buying the cheapest SM card I can find to make the drive visible for this task? The SmartSyncPro database has many profiles, so remapping all those to point to K would be a major hassle.
My C: drive has been displaying a size of around 60 gb with 40 free even though it's a 300 gb drive. I thought the issue would resolve with a clean install, so I did that. Now I have a fresh install and i need to reinstall everything, but the problem isn't fixed. Below are some screen shots of the drive size:Disk Management, showing my C: Drive's full size ^Any suggestions of how I can reclaim this space?? I've tried a few things already to no avail. If you need any more information about my computer to help, let me know. This is pretty annoying, 'cause I want to use that extra space to install Ubuntu.Oh, I just rememberedWhen I look at the drive in Paragon Partition Manager, it shows the full Drive size, but says that the space that is missing from Windows is in use...
My HP laptop HD crashed, am trying to replace it with a Kingston HyperX 120GB SSD. I do not have Windows installation disks, only have Windows Recovery Disks. All installation instructions I have found for SSD's is for cloning, which I cannot do since the HD is deadI have installed the SSD, booted into BIOS, this simple BIOS version doesn't allow me to change anything on the HD, but it does recognize it and let me do a HD test, so it does recognize the SSD. I then put the Windows Recovery disk in the CD drive, attempted to boot up, but the CD drive just spins and spins but never boots up. I thought the CD drive might be bad, so I tried an external USB CD drive with the Recovery disk, but it does the same (just spins). I even got a new Windows 7 installation disk (from another PC) to see if it will boot from it, but get nothing but a spinning CD I have not done anything yet to the HyperX SSD, haved not formatted or partitioned it.I thought this would be done by Recovery on the OS installationThe BIOS is set up to first boot from the CD drive, so the boot order is not the issue.
I was going to get around to defragging my C: drive today, (which I don't actually remember if I've ever done in Windows 7) and when I opened the Disk Defragmenter, the C: drive doesn't show up, and as a result I can't defrag it. I have an HP Probook 4510s.
I have a problem that says windows trouble shooting the disks where you backup is being saved does not have enough space on free space. it gives you a couple of options showing managing back up space change back up settings or run back up again. I think at one time I tried to do this but did not know how. How do I do make a back up? Does it go on a disk ? Can you give me detail step by step on how to do? I don't even know what a back up is . It shows it is in the Lonova D and there is an error code 0x81000005. Is this why this is happening below?
I have windows 7 laptop and in the computer section it shows disk f disk c and lenova disk d and it is in red . It shows 7.81 mb free space of 28.9 gb. When I start my computer this comes up and says my space is full and shows the recycle bin but it is empty. Don't know much about computers and don't know what that disk is for . Can you explain before I erase something or do something I should not do.
When I try to access drive D it says this "you need to format the disk in drive d before you can use it". I don't even know whats in Drive D, my computer is new. But when I right click properties for used space it says 0 bytes and free space 0 bytes. But it still says its full. [URL]. After I press cancel [URL]. Drive Space [URL]. What should I do?
I have just gotten a new and very powerful computer for Christmas, but the disk drive doesn't appear on the My Computer menu. I have checked the bios, and it is there, but Windows 7 doesn't seem to find it. I have Windows 7 64 bit and a Gigabyte 870A-UD3 motherboard.
I have a cd with pictures on it from my holiday. When I got home I tried the disk in my ps3 and all the pictures were there I then tried it in the e drive of my pc but it doesn't recognize the disk at all. I have since tried it back in the ps3 and now that doesn't recognize it either. Am desperate to recover the pics??
Every 5 minutes or so , a pop up saying "You need to format the disk in drive g before you can use it" comes up. Problem is, I have no disk in drive g, and nothing connected to my usb ports. So i have no idea what this means. Add to this that the device manager keeps refreshing and will not let me click anything.
When i did partition by disk management. it allowed me only to partition 226 gb space.so now in my e drive there is 226 gb n in c drive 227gb space.actually i want to keep in c drive 100 gb and make another drive of 100gb but whenever i try to shrink it doesn't allow to extend.
Would you know how to get my disk drive to start showing up and reading disk again? It stopped when I installed Windows 7.
I am guessing the Optiarc DVD is it. I went into properties and looked at its status and it gave me "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)"
In my Win 7 setup, I have a drive that is called JRemovable Disk). It seems to be "Canon MX700 series USB Device". I do not know what it is for, and I really do not want it. Could someone describe it to me, and tell me if I should get rid of ot, and, if so, how?
C drive is showing "space free 1.49GB of 19.5GB" whereas when I'm selecting all the files inside C drive its showing 16.7GB on disk. So C drive has 2.8GB free, But showing only 1.47GB free. Where is the space allocated?
I am getting this popup: "You need to format the disk in drive x before you can use it". In my case it's drive H:. I have unchecked "Use AutoPlay for all media and devices" in the Control Panel. I did this a week ago when I started getting these popups and it seemed to work till today when it all started up again. I just noticed that the popup is not appearing, but the drive is appearing and disappearing from my file manager (I use Q-dir).
This weekend a installed the windows 7 64bit over a vista 32bit. During the installation I left my Samsung S2 HD 500gb plugged in.After the installation the windows didn't find a mass storage controller drive and my HD appeared as Local Drive ( F: ). When I try to access it, this msg comes up: you need to format the disk in drive f before you can use it. I tried plugging in all usb port I could find. And even the win xp 32bit showed the same msg. I also tried the "Easy Recovery Pro". But it didn't worked. When a click on any of the recovery option the software doesnot find any hard drive in my pc. Then I tried the "GetDataBack for NTFS". After 24 hours of scanning, it didn't find any of my files. Tonight, I will try the "diskdigger" and the "Recuva". But I am not putting too much faith on those software due some post I read here. I really need to recover same work data.
I have a compaq presario that keeps showing this. I put another HDD in and it is saying the same thing. Does it mean the old HDD was buggered and I need to do something to the new one to sort out boot order or anything? or is this not a HDD issue. I have two broken compaq presarios here. One with no screen working and one saying no bootable disk drive.
Lately I've been receiving "No Disk" errors when I start up my computer. It appears to be "NoBuClient.exe" and "CCC.exe" that result in the "There is no disk in the drive. Please insert a disk into drivedeviceharddisk6dr6" error during startup. "Dropbox.exe" and "Acrobat.exe" have also been noted to give the same "There is no disk in the drive. Please insert a disk into drivedeviceharddisk6dr6" upon launch as well.Is there any way to stop the errors from happening?
Whenever i try and insert a disc & click the dvd drive, it says "Please insert a disc into drive F:" This happens whenever i put a burned disc. I earlier had Windows XP and i could read the dvd but i cant in windows 7. Also i could not read in vista. I tried in different machines. But it was recognised in all XP machines but not in Windows 7 or vista machines. Please tell me what can be the issue
I'm trying to transfer my boot drive/c: drive to another disk (actually, a raid 0 array of x2 500Gb disks) by creating an image of it, and i'm having trouble doing it using the system image recovery profram within W7. Can this actually be achieved or do I need to use a third party program?
I cant burn dvds on my hp dv7. I use Win 7 64 bit Home Standard edition. I have owned this computer 3 years now and since my free upgrade from Vista to Win 7 the problem has existed. As far as I can tell the filter trick only works for one or two of these machines, and will only really help the problem when it first manifests itself with burning issues. One day your filters will just break in the registry, and at this point the problem becomes unsolvable, even by changing out hardware, or uninstalling and reinstalling old hardware. It would be nice if someone other than Microsoft or HP would look into this or that said companies would make a real effort to figure out if the problem is an interaction between the firmware and the registry or the driver cache and the registry. I fix networks and computers for a living, and am working on my BSIS in Technology Management?
