I have a Dell Inspiron 546 running Windows 7 Ultimate.Last week after a reboot I got an error stating no bootable device found. I checked the Bios everything seemed in order and out of desperation I reformatted the drive and although shes runnning like new again the same error appears. If I insert the installatin DVD it boots normally.
View 3 Replieswhen i turn on thers a blank screen saying f2 and f12,iv,e pressed both and nothing happens,just a other blank screen saying no bootable devices, i connected a external hard drive and put a windows disc in to try reinstall windows,but still nothing ,windows goes through the motions,and then says something about not been able to find a hard drive
View 9 Replies View RelatedI have an Acer Aspire On 10inch Notebook that runs on Windows 7 Premium Edition (32bit). I'd been having some troubles with its speed for a day or so and since I'd neglected to do a Windows update. So, I restarted it and hoped that once it installed those updates everything would be fine. My first warning sign was the time that it took to turn off - probably 15 minutes was spent with the screen continuously saying "Shutting Down" and I took this to mean that it was probably a series of updates that I had missed. So, I left it to sit and came back to check on it afterwards.When it finally finished, a black screen took over and sat there for quite some time. Eventually I grew frustrated and restarted the computer, and saw the 'Acer' screen come up, and then the computer screen went black again and a command line started, where I received this message[CODE]
View 3 Replies View Relatedi have an acer aspire one notebook and one day it was working and the day after when i turned it on it goes to the normal acer loading sign then the screen goes black and makes a beeping noise for about 10 seconds then this error comes up
Intel UNDI, PXE-2.1 (build 082) Cpoyright (C) 1997-2000 Intel Corporation For Atheros PCIE Ethernet Controller v2.0.0.9(05/08/09)
Check cable connection! PXE-M0F: Exiting Intel PXE ROM. No bootable device -- insert boot disk and press any key When i click enter this message just appears again.
I have a 16GB USB drive sitting here calling me.. I have a project I want to do with it as well.
I would like to have Windows 7 32bit, Windows 7 64bit, Hirens Boot CD 9.9, and Windows XP all on the usb drive for install.
So basically I would boot from USB a menu would pop up and a choice of one of these 4 systems would be presented. Once you pick that Disk it would bootup to the install or application selected.
I was able to make a x32 USB Windows 7 stick but im confussed how to do a menu and allows multiple bootable images on a USB drive.
I have a Compaq Presario C700 which is giving me the following error: No bootable device -- insert boot disk and press any key.
I'm a technical user and have been able to fix just about anything, until now. I've done some research, and I've found that this Compaq C700 is a terrible computer that just can't be fixed. They're probably right.
I've tried to boot off an external optical drive, but this failed to load the system. I've checked the boot order is correct and that the optical drive was enabled in the BIOS, but this still did not allow me to boot from the optical drive. I knew that it recognized a system there because it had an underscore, which meant it was trying to boot from the disk, but sadly, no luck.
As for the hard drive, I've replaced it with a spare, couldn't install Windows 7 on it directly from the laptop, so I installed it on my desktop system, then put it back in. Still, the message. No bootable device -- insert boot disk and press any key.
I've verified every available BIOS setting to the last detail. The only thing I could think of and haven't yet tried is to try to see if there's a CMOS battery anywhere and disconnect that, but I'm not sure where that could be on a laptop, and taking this thing apart is practically impossible.
I know the CPU and system board and everything else seems to be in working order, it's just that it can't seem to work off of a Windows 7 disc or installation. A red flag for me was when I went into the BIOS (InsydeH20) it mentioned that Vista was the factory installed OS. I wonder if it's doing this because it's expecting, and is proprietary to, Vista.
My Toshiba Satellite L755 is receiving the following error at startup:
Check cable connection!
PXE-M0F: Exiting Intel PXE ROM.
No bootable device -- insert boot disk and press any key
This occurred after I used Toshiba Wizard to clear the hardrive. I was attempting to get everything back it's original state.
So far I have gotten into setup by holding f2 at startup. The boot tab reads:
1. HDD/SSD Hitachi HTS545050B9A300 (S1)
2. USB
3. ODD TSSTcorp CDDVDW TS-L633F (PM)
4. FDD
5. LAN Atheros Boot Agent
I have also tried disconnecting the battery and harddrive and then reconnecting them.
I was just on the laptop browsing the internet as normal then all of a sudden out of nowhere it shuts off. Turn it on again.
I get this screen: [URL].
Then I got to the BIOS: [URL]
Then checked bootable devices: [URL]
The HDD is still connected: [URL]
So what do I do? I have valuable files and photos on this hard drive and do not wish to reformat or reinstall my OS.
NO BOOTABLE DEVICE--INBSERT BOOT DISK AND PRESS ANY KEY FOR REALTEK RTL8102EPCI-E ETHERNET CONTROLLER v1.07 (080320) media test failure, check cable
View 2 Replies View Relatedthe hard drive failed... i like to install an external hard drive. I have inserted the recovery CD...removed the failed hard drive yet the error stops to recover
View 1 Replies View RelatedI have XP Pro64 bitand I am trying to upgrade to Win7 64 bit, While it is unwrapping files there is a point where it needs to reboot. When it does it comes up with the error saying it cant find a bootable device or something in that effect. I removed the win7 dvd and hit the restart on the computer. Install continues. It completes but when I try to put all of the data back in I cant open up my user name (Documents and Settings ) folder has a lock on it. I finally gave up and I am reinstalling XP Pro64 bit again as I type.
I will try to upgrade again.
Can anyone explain why when it reboots it wont just continue to install with the disk in the Drive?
Why there is a lock on the folder and wont let me access the files?
I was in windows update when all of a sudden laptop went into dos mode an shutdown. Went to restart an I get "no bootable device"?
View 1 Replies View RelatedI have Windows 7 on a AMD Phenom Machine. Hard Drive died so I put another one in and restored Windows with Acronis True Image.
When I leave the Windows repair disk in the drive, the restored system starts perfectly, runs perfectly etc. But if I pull that repair disk out of the drive I get this error about "No Bootable Device" "Insert Disc". So in other words that repair disk has to be in the drive, else I get the error.
I have already:
1. Verified that the boot sequence points to my Windows Drive
2. Run system repair. That's useless. It just tells me everything is fine.
3. Run bootrec fixmbr, vixboot, rebuildbcd. No problems found
4. Run Chkdsk. No problems found.
My Acer Aspire One net book displays a message when I switch it on. It says 'No bootable device..please restart system'. How do I do this?
View 2 Replies View Relatedi bought a new dell inspiron n 5010 and i have downloaded windows 7 professional(64 bit) from the MSDNAA account and burned the image on the DVD.In the bios of my laptop i set the sata mode to ahciwhen i try to install windows 7. it loads file completely but after install and next button click a dialog box appears with some message as "No device drivers were found. Make sure that the installation media contains the correct drivers, and then click ok."That message gives me 3 buttonsok, cancel and browse, neither of OK and CANCEL would let me through the install, and with browse i have tried to find those missing drivers but without succeed
View 2 Replies View RelatedOk so I just reformatted my Windows but the first thing I noticed wrong with it was the video quality it was pixelated and blurry so I looked through my device manager and the I saw the PCI device is not installed
View 9 Replies View RelatedI try to clean my asus every weekend (clean, scan disk & defrg) and shut down. When i try to on it show me windows 7 repair (recom).I dont know whats wrong. I start repair my asus and the result (mbr corrupt) i try fix mbr it show me (i/o device not found) i go to bios and check my hard disk its there..
View 2 Replies View RelatedNo device drivers were found. Make sure that the installation media contains the correct drivers, and then click OK.
Windows XP-32bit > 7-64bit
I have now spent many hours now on this and this is the latest error message i get after redownloading and going through all this malarky. I am getting very frustrated and heartly sick of MS. They are every example of a monopoly for the economist and will be for years.
It is an absolute disgrace that they never even got 10 students to try and download when they uploaded; it's just basic. The money I have spent buying it have been long exceeded at a personal cost in time. I feel cheated.
have an aspire 7560-sb416, when i turn computer on i get: check cable connection!
View 1 Replies View Relatedwhen i start my laptop the windows logo hang,all keys not function.i push off power button for 5 seconds and i open it together with f2.start up menu registered ang when i follow the step the result is boot device not found 3fo
View 1 Replies View RelatedWhen i am start my HP Ultrabook II then error is boot device not found please install an operating system on your hard disk hard disk- ( 3f0 ) f2 system diagnostics for more information,visit: [URL]and press f2
system diagnostics
f1 system information <run complet>
f2 staert-up test <run complet>
f3 run -in test <run complet>
f4 hard disk test <hadr disk not exist >
So loaded up a older laptop from 2009, with the common issue " no boot device found". So I went pooped in the restore CDs and reloaded the OS and went through and redid everything. " thought it fixed issue" shut down and reloaded os. With same msg " no boot device found" so i pressed F2 and choose boot proprity hard drive and then it loaded OS as if nothing happened. So i thought maybe my hard drive could have issues, Did harddrive all passed, So i think now that it could be my motherboard or the sata connecter?
View 3 Replies View RelatedDownloaded and created start-up disc.
As soon as the install starts I get a message "device driver not found" and it asks me to install CD ROM diver.
Is there a generic driver I can use?
Having a problem with an unknown device under Other devices. I tried scanning for hardware changes and updating the device but keeps coming up with no driver found. As well as the fps of a game I play has dropped significantly from where it was a day ago and get prompted the game is having trouble recognizing my graphics card this has never happened before.
View 4 Replies View Relatedi bought a touchmate bluetooth headphone but its not connecting to my laptop (hp6710b).its giving me a msg that bluetooth periperal device not found. i m using windows 7 home basic 64 bit. all the wireless things mobile wifi works properly except my bluetooth headphone.
View 1 Replies View RelatedI'm quite puzzled with this problem. I'm trying to fix a microphone to my PC (Control Panel > Hardware & Sound > Sound > Manage audio devices) and try to configure the "Recording tab". In the tab, the message says "Realtek High Definition Audio Not Plugged In".
View 1 Replies View RelatedLast night I recover my dell inspron from the recovery disk. After recovery of windows on factory when i boot the system it stuck on a error boot device not found and said that i should repair it from windows 7 DVD which i didn't have. Is there any manual way to repair the boot files from another source or through flash drive
View 1 Replies View RelatedI bought a W7 Home Premium, the discounted version for students, and I'm trying to install it on my Acer 6930G (500GB, ram 4GB, ...right stuff for W7).
I'm actually running W Vista x86, and I know that in order to run W7 x64 (the one I bought) I must do a custom installation from the boot. And I'm doing so, well trying to...
After the window asking for my location and keyboard input, I continue but then I get stuck.
A new window pops up asking me for a device driver...it stated "device driver not found"...
I read a lot on the internet, but that's driving me mad...
how can I solve the problem and having that OS running?!
I'm going to sue Microsoft if that OS is not gonna run... xD
I got a start up error no device drivers found.
View 5 Replies View RelatedI have a HP C6180 all-in one printer. Recently bought new desktop that has preloaded win 64bit Win 7. I loaded original HP cd to run it. I can print from computer, I can copy from computer, I can scan and reprint BUT! I cannot scan and save to computer. attempting to scan to memory device causes the Message: no computer needed (!) press OK, message: Save Failure and Memory device not found.
I have a lot of pre digital camera photographs that I would like to scan and save.I have downloaded from HP an update but still no joy at scanning and saving.It has been suggested that the driver is OK but need Software to correct error?
I have a HP ML110g5 server which I have disconnected the smart array and connected a HDD via sata directly to the motherboard.when installing windows 7 "No device drivers were found etc."does anyone know where I can get the drivers (I assume for the HDD) so windows will recognise where to install windows.Bios does recognise the HDD.the HDD model is 9ca152-784 by seagate
View 1 Replies View Related