I have just taken delivery of a new Win7 computer that contains 1 HDD (1TB). My old computer (Win XP) contains 2 HDDs (both 1TB). I am thinking of installing the 2 XP Drives into the Win7 box - are there any issues that I need to consider?I am also considering a boot option so that I can boot into Win7 or WinXP (from my Win XP computer). Will this set up work?
View 8 Replies
I have a Windows 7 Pro with a 40MB drive and a 1.5TB drive. I wanted to add the TB drive to the 40MB drive which is the C: drive. I don't see a way to do this. I have checked out 3rd party software to join them but my IT friends say that's not a good idea.
View 2 Replies View RelatedNeed to do Win 7 install on 50 gb partition and keep my 200+ win 7 install intact but don't want to use it as a boot and dont want to delete it just to get rid of Windows and boot. I want to use it just as a data drive. Dont want to have to activate the new small drive.
View 9 Replies View RelatedI recently completed my first build within the last two weeks. After tinkering with everything for a while I decided to pull my HDD out of my old Dell and use that as a backup.
I then got to thinking about how it might be useful to install Windows on each hard drive and use whichever one I want for whatever I want to do with the computer. IE: One HDD will be only for games and the other HDD will be for everything else I want to do. I've done a few searches and found conflicting results. To add to this problem I returned my Gygabyte MOBO for a different model. I know I will have to reformat my current HDD that Windows is installed on. So here is the twist.
When I get the new MOBO hooked up I want to use my old Dell HDD as my primary HDD because it is bigger. Since Microsoft thinks Windows is installed on the other HDD and different MOBO what will happen with I install it on a new HDD and new MOBO? It would be essentially the same as installing it on a different computer which is obviously not something Microsoft wants happening. How is this done?
Now, given that I get that to work can I then disconnect my primary HDD and plug in my second HDD, boot from disc and install all over again. I have no problem going back and forth disconnecting and connecting which HDD I want to use when i boot up if I cannot have them both hooked up to the MOBO, but I assume I can and will just choose which to boot from in BIOS. I do not plan on moving data between the two drives as I will use an external HDD for any data backup that I might need.
I can not select my boot up drive anymore from my two hard drives, two OS pc. Both drives are SATA drive, but one of them appears as IDE in Bios. What is going on here?
View 1 Replies View RelatedI have a question regarding the install of Windows 7 Professional 64 bit. I've done this on one HDD successfully and due to conflicts with additional software I wish to reinstall Windows 7 on a completely new HDD (on the same machine). This way I can keep both programs separate also leaving me with an additional OS in case the other fails. I plan to use the BIOS to switch to the other drive (boot order) when I wish to use the other software on occassion. I plan on backing up my files onto an external drive. So my question is as such, can I load Windows 7 onto a separate drive and switch the drive of which to boot from to achieve my goal?
View 9 Replies View RelatedI shut down windows 7, and it seems to, but the computer fans / lights / drives /Ram all still have power. I tried searching my power options and making sure everything was set properly, etc. I even re-flashed my bios. I didn't make any major changes like add new hardware / software, only some windows updates that I've now rolled-back. It looks like one or two people just had to adjust a power setting, but that does not seem to be my issue. I don't want to re-install windows.
Windows 7 64 Pro
Asus M4A79XTD EVO
AMD Althlon II x 3 435
4.0 Gigs Crucial Ram (1600)
WD Caviar .5 tb drive
LG Combo drive
Mouse / Keyboard through a starview KVM switch (swap from work and home pc's)
I have a new computer that runs Windows7 64 bit. I have an older computer hard drive that has XP.I needed something from the old hard drive and hooked it up with the cables from the Windows 7 hard drive and it booted up and ran. I've since gone back to using the Windows 7 hard drive.How do I proceed to add that second hard drive running XP to the new computer so I can have the option of running either OS? I've read through some posts, but they all presume you are installing the OS to new clean hard drives, not have them already installed.Is it as simple as hooking the XP drive into the computer as a second drive and booting it up? Do I need to change some external setting on the hard drive to have it recognized as a slave? Will Windows 7 automatically change the boot to recognize the second OS and allow a choice at startup?
View 7 Replies View RelatedI have built many computers but am having a little bit of a problem with some things and my new one. My new install went great. All programs installed without a hitch. Fast and furious is the way it went to get everything installed. Now, after a week or so I have started having a couple glitches. When I go to install a new program or update it the program just sits there for 4 or 5 minutes before doing anything and then finally starts to do its thing. The other issue is that I am trying to do a backup and image clone to get my new system backed up. The problem there is that the windows backup won't see my hard drives. I then tried Norton Ghost and the same thing happened. What is causing this?
View 13 Replies View RelatedOn this network there are three Windows 7 machines and two Windows XP machines. One of the Windows 7 machines is acting as a server providing all the other computers with shared folders that they network to via the "map network drive feature". The two Windows 7 machines connect to this central Windows 7 machine no problem. But the XP machines will sometimes lose connection to the network drives when accessed. They cannot see the network drives until the central Windows 7 computer is restarted. The other two Windows 7 machines have no problem connecting, even when the XP machines are having problems.
I found this article and wanted to check here to make sure it was applicable to my situation before I go ahead and muck around in the registry: Mapped Drive Connection to Network Share May Be Lost Problem is, the article says this: Quote: On a computer that runs one of the versions of Windows that is listed at the beginning of this article... There aren't any versions of Windows listed anywhere in the article, or none that I can find. In addition to that, it doesn't specify whether I'm supposed to be doing this on the server end or the client end. I would assume the client end but it's just another thing I want to make sure of before I go ahead and do it.
Just upgraded to Windows 7 today and have been totally loving it! Its so much faster than Vista.
I just have one major problem that has been bothering me. I dont know whether its a bug or just a noob mistake on my part but I am unable to see any drives whatsoever in the "computer" folder. I have tried disabling/enabling the "Show empty drives" thing but to no avail.
It would be great if someone could help me out with this issue.
In the screen shot, C, E, and F are legit volumes/drives. I have no idea what this Local Disk 'Q' is. I try to open it, says not accessible (and it shouldnt be because it doesnt exist)
Also, Removable Storage, I have 1 DVD drive, the rest G - L are bogus. One of those is listed as a BD-ROM which I dont have either.
Why are these listed when they dont exist?
I had a computer built for me that includes a new 1TB drive running Windows 7 64-bit for the OS and I would like to move over the drives from my old computer to be used as storage drives. Here's my questions:
1. I have a 750GB drive from my old computer that was running the OS after installing it what is the procedure to reformat it for a storage drive?
2. I also have a 500GB drive from my old computer that was being used as a storage after installing it will my backed up files still be intact or could Windows somehow delete those files?
3. Since my old computer still has a Windows 7 license tied to it I might put in an old drive, load Windows, and either sell it cheap or give it away. When you load Windows with the intention of someone else being the End User do you just quit the install a certain point along the way?
i can't see the hard drives in my computer
View 5 Replies View RelatedI have switched CPUs in order to upgrade my system, but I have copied over all the important files from my old computer. The current CPU was used by my dad before me and worked perfectly. It runs on Windows 7. However, since unplugging the tower and moving it back to my room, it no longer recognizes any of my CD/DVD drives. They are both functioning, turning on and opening and closing, but they are not listed under COMPUTER. I have tried several fixes on this site including merging my registry with a file on Notepad and running a program called cdgone but it still doesn't work. When my computer boots up I go to a screen with F2 that allows me to view my system. The drivers are listed as off but when I switch them over the computer will not let me. [code]
View 1 Replies View RelatedMy computer has suddenly lost removable media drives or their letters. Can not see any removable media location.
View 4 Replies View RelatedI just bought a new computer with Windows 7 Professional 64 bit . I added 2 hard drives from my old computer to the new one. The old computer was Windows XP 32 bit with a Raid 1 configuration. I just want the added hard drives as storage and non raid. The installation went smoothly but the new computer recognizes the 2 added hard drives as one drive. Also when I boot up, the boot screen from the old computer shows briefly with the intel raid 1 info.
View 5 Replies View Relatedi recently built my computer and it has four hard drives, a new SSD, and three HDDs all taken out from my old computers. when i open my start menu and type something in only the results from the SSD will come up, how do i fix this, also all my old HDDs still have their operating system on the i never bothered working out how get rid of them.
View 3 Replies View RelatedHow do I get my external drives to show up in my computer as a letter and not in the printer and devices.... Some of my external drives works fine. Everything was working fine 3 months ago. Everything works fine on my laptop...
View 1 Replies View Relatedi'm using win 7 ultimate. when i plug usb drives, they are recognised also can be explored via computer management. but it is not appearing in my computer. any registry key problem?
View 2 Replies View RelatedAfter searching this forum and googling everything I could think of, I still can not find a solution.
I have a Compaq Presario V2000 (Yeah I know, probably not the best machine for Windows 7) and any type of USB drive I put into a USB port will not show up in My Computer but it does show up in Device Manager and Disk Management. However, my iPhone will connect just fine.
I have checked all the drivers and they are up to date. I went to the Western Digital (my non accessible External Hard Drive) site and there were no new drivers for the drive. I un installed all of the USB Root Hubs and then re installed them. I have basically tried everything thing that I found after googling.
Recently my computer's hard drives started clicking, both of them. I wasn't able to copy off my files or boot up as it would constantly freeze. So in order to save my data I bought a sata to usb cable to connect to my laptop to copy off the data. When I connected it I was able to save all my data and the hard drive didn't freeze one bit...a friend of mine suggested that it wasn't the hard drive but in fact the power supply that was causing it. Could it really be that or is my HD really dying or is it something else?
View 9 Replies View Relatedmy computer does not starting up...so i choose to press f12 then diagnostics then it shows that no hardrive detected -warning.
View 1 Replies View RelatedI recently noticed an issue when trying to connect to external hard drives. Initially noted that it wasn't showing in 'my computer' and so assumed I had driver issues and sought to update them from Dell's site. After doing so there was still no change, but noted that It was appearing in 'device manager'.I even tried updating the USB hubs from the Device Manager, and it states that they are all up-to-date with the correct drivers. Both external hard drives that i have tried has worked on other PC's so i assume that mine is the issue.
View 1 Replies View RelatedI am running windows 7 64 bit, and have 4 external hard drives attached (not the best way, but until I can afford a server, the only way). I am using my computer as a media center only. When I wake my computer it can take a while (30 seconds to a minute), before I can use it, due to it starting up my external hard drives, but I have noticed a couple of times, my computer will wake without starting up my external hard drives (able to use media center within 2 seconds). Does anyone know if there is a way to get my computer to wake up without starting up the external hard drives every time?
View 7 Replies View RelatedI just updated to a z77 i5 3.4 and everything has installed fine except for my creative arena headset usb. It was working just fine on my other machine earlier today but now that I have a new mobo and cpu it will not install the drivers. My SSD and HDD were not reformated and I have tried uninstalling and reinstalling the drivers a few times with no change. I just get 3 rapid beeps when I plug the USB in.
View 5 Replies View RelatedIs it possible to do a full search for a document through my entire computer system including both external drives?
If so where do I start from.I tried by going to Computer from the Start menu then selecting the C: drive but was wondering if that done a full search of the other drives.
Windows 7 Drives in My Computer I have many Windows 2008 R2 servers running as my DCs. I created a drive mapping group policy on one of the 2008 servers to map my network drives in my AD environment. My Windows XP machines work great 100% of the time. In Windows 7, this is not the case. I cannot see the drive letters listed when I click "Computer" but if I go out to DOS and look at may mapped drives using the net use command I can see all the drives I have defined in my drive mapping policy. I can also see the drive letters within programs like Word and Excel. I just cannot see them listed within My Computer. I looked on the web and I found this about a Reg setting and hiding drive letters. The following settings are not in play.
[HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer]
"NoDrives"=-
[HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesExplorer]
"NoDrives"=-
I can add drives using "Computer" ,Map to the network drive, click Reconnect at Login and the drives then will show up for me each time I login. I have about 150+ Windows 7 machines out in the field and I need to deploy about another 300 or so soon but the drive letters not showing up in "Computer" is holding me back.
I just finished putting together my computer, installed Windows 7 Pro 64 bits. However, both of my hard drives (one SSD, one regular HDD) are showing up as external drives (plug-and-play). If I click the "Safely Remove Hardware" icon, I could actually "eject" both of my hard drives.
View 5 Replies View RelatedI have searched google for ours trying to find a fix for this but to no avail.CD drive and virtual drives dont appear in my computer and whenever i put in a dvd nothing comes up.it appears in device manager and disc management however so i know there is nothing physically wrong with the optical drive. Under disc manager i can see the details about the dvd such as dvd name, size etc.i tried changing drive letter and path but unfortunately that doesnt fix it. the letter "applies" for a second then disappears again.
View 5 Replies View RelatedSo, I just built my first computer, components below:[CODE]Anyways, I restared the installation, but this time, I got the "No drives were found. Click load driver to provide a mass storage driver for installation." message. I looked up the solution and checked the BIOS, when, to my surprise, I could not find the SATA connection to my HDD.
View 9 Replies View Related
