I have hp2420 laser printer (not with Ethernet option) loaded on Windows XP and I have new computer Windows 7 64bit I can see the printer but am not able to load that. I have down loaded the driver from HP site and loaded on 64Bit computer.1. shall I load that driver on 32 bit system? if yes will that mess up the connection to other 32 bit system.
View 2 Replies
I just loaded a new copy of windows 7 home 64. Now my computer doesn't recognize my printer or Ethernet cable.
View 6 Replies View Related32 bit system has photosmart 7760 usb attached.64 bit win 7 will network to 32 bit system and see printer but when you try to add, it looks for drivers and goes to windows update and looks but can not find because hp does not offer a win 7 driver for this . it states driver is part of os system comes back states not able to find driver?
View 3 Replies View Relatedmy sd card or any usb storege device not working, it gives message format disk
View 1 Replies View Relatedletest mass storage software to upgrade on line it self
View 1 Replies View RelatedAll of a sudden my computer after 1 hour freezes and crashes completely.I get a black screen of death with error code 0xc000000e Recovery Screen After i hit enter i got another message saying Your PC needs to be repaired. The application or operating system couldnt be loaded because a required file is missing or contains errors. File: Windowssystem32winload.exe Error code: 0cx000000e After the error happens and I restart, the main hard drive will not show up and I have to restart again for it to show up.SO i just went ahead and formatted the PC and reinstalled windows 7 from scratch.After an hour or less the same thing happened again and also when I reboot the computer asks me to choose which windows 7 I want to log into. Why is this showing up if I formatted the disc completely (Deleted and created New disc while i was reinstalling windows 7)My main drive is a Crucial m4 SDD 2.5 128GB Sata I have 4 other drives with over 2tb each but i use this for files. Windows is installed on just the crucial HD?
View 9 Replies View RelatedCan anyone tell me if I can install an OEM Win 7 64 bit serial number on a system that was loaded from a Dell reinstallation disk? I bought the disk, and what turned out to be a bogas serial number from different venders. Now I have purchased the whole legitimate program from a vender I trust. The reason for wanting to do this involves licensing limits on other expensive software already loaded.
View 8 Replies View RelatedNew windows 7 Home Premium desktop that can print when the printer is directly connected but can't print when the printer is connected to an XP pro pc. It can see it but we're getting a "driver cannot be found on the network" flag.
View 9 Replies View RelatedWe have just added our first Windows 7 pc to our XP network. I would like to connect to the Windows 7 PC to a shared "Epson lq-590" printer on one of the XP machines.According to the Epson website the only drivers available for this printer are through Windows 7 update in the "add a printer wizard". If the printer is directly attached to the Windows 7 PC the driver installation via "add a printer wizard" works without a hitch. When trying to add the printer over the network the Windows 7 "add a printer wizard" cannot find the driver for the printe
View 5 Replies View RelatedI was just given a Epson Stylus Pro 7000 wide format printer and was wondering how would I set this up as a network printer. Epson stopped updating it's drivers and does not offer a driver for W7 and I've tried in vain to load VPN XP mode without success. I am using an older laptop to drive the printer but it's painfully slow.
View 5 Replies View RelatedI put a new win7pro pc on line. I want to connect to a brother printer on the network connected to a xp pro sp3 machine. I can see it in active dir. but comes back .inf file not found. I tried local install \\machinename\printername,I downloaded drivers six ways from Sunday,I tried everything I could find to try.It either comes back cannot find network or .inf not found.
View 1 Replies View RelatedI using windows 7 pro 32bit, I install printer HpLaser 1020 on Usb and Tosiba Estudio 255 on Network. I using both Printer on Earliest, but this 3 day not printering on both Printer. I check the Printer driver in Printer setting it ok. And also check Printer spooler on services, he is not start so i can restart on the printer spooler, after 2 min i check it the spooler automatically going stop. I restall the Driver also can't install the Printer driver.
View 1 Replies View RelatedI have installed Win 7 a while ago and today needed to print to my upstairs printer. My printer is a HP Deskjest 340 and it is connected to an iMac. I have all comps networked together so when i click add a printer my HP shows up as connected to my mac, no problem there. When i select the printer it starts to install a driver for it but a message comes up that says "No driver found" it asks me if i want to search for a driver on my comp but i don't have one to begin with. So basically I'm stuck. i have been to HPs website about there drivers and such and they don't have any drivers for Vista, they say the comp will look and find one for you while it did properly.
View 9 Replies View RelatedI just installed 7 and am trying to get all my stuff up and running. One thing still missing, is a NEC P30 that's connected to my 2003 Server and shared. Windows Update won't find any drivers, how could I go about to use that printer (though it's just an old dot matrix printer, I badly need it.
View 9 Replies View RelatedI'm looking into purchasing a new printer. However, the one I am interested in only has up to wireless G. I'm just looking for some opinions. Do you believe I'd be better off with one that has wireless N?
View 9 Replies View RelatedOriginally, i had one network running under a Dir-665 router where all the computers under that could connect to the printer (HPPrintPC) on the computer (which is connected to the router.After moving to uverse, i have two networks, the one above and now the 2wire network due to uverse.The computer with the printer is connected to the 2wire network, and all the other computers are connected to the Dir-655 network. The computers on the Dir-655 Network can't connect to the printer on the 2wire network but can ping the computer it is connected to.
View 3 Replies View RelatedI am connected to a network through a router and the printer I use is connected directly to another computer. On initial boot up my computer shows the printer under "devices and printers" and I can print. However over time, the printer disappears from "devices and printers" and the only thing I can do is re-boot to get the printer back. How do I stop the computer from loosing the printer?
View 2 Replies View RelatedI have installed a HP office jet 6700 on my network my laptop Windows 7 X 32 can see the printer and print. However when I tried to install the printer on my wife's laptop I cannot get it to connect at all. The printer can be seen on the network however why I try to print nothing goes to queue. I have check spooler service and it is on.We use to have an old HP photosmart but it stopped working. I bought a HP5510 and had the same problem now I have same issue with the HP6700 and off course HP support cannot explain why this is happening.
View 9 Replies View RelatedI have a wired desktop and a wireless netbook. Both have 7 Ultimate. I set up HomeGroup on my desktop and my netbook can see & access my shared folders.
I also have a couple of printers. The one I want to be able to access is a wired HP Laserjet 4000. It's old, but built like a tank and has 64MB of RAM and a Jet Direct card. I have it plugged into a Cisco router. When I added the printer I chose "Add a network, wireless or Bluetooth printer". It locates the printer and assigns an IP address. As long as my desktop is on I can print to it from my netbook.
The problem is that I want to be able to print to the printer without having my desktop on like any small network. I should be able to since it has it's own IP address. It is on the correct port and everything in HomeGroup is working except printing while the desktop is off. I hesitate to install the massive Jet Direct software but I will if this will solve the problem.
I am very tired after staying up way too late doing a clean install of Ultimate on my desktop and reinstalling apps & arranging everything. I am thinking it has to be something simple I am overlooking ATM as I am not clear headed on 3 hours of sleep.
Trying to install an HP 2100 tn printer through a Linksys router to a Win 7 62 Pro machine. Win 7 drivers for Asus MB, Marvell Card and latest firmware for Linksys router.
Tried Win 7 printer installation routines a jillion times...and it couldn't find the printer (power cycled router and printer several times). Used HP latest network diagnostic but it can't find the printer. Used latest PCL 5, 6 and PS drivers from HP - nothing. Used netsniffer with HP diagnostic and it looks like the diagnostic sees the printer (reports the correct i.p. address) but doesn't identify it as a printer.
Went back to XP where the printer works and found it is currently working with IPX protocol.
Anyone have any ideas? I don't want to buy a new printer, or stick with XP.
We use a HP932c printer as our network printer but no other computers on our network can see it. Everything is set for sharing on Windows 7 and on the other computers which are running XP and Vista. Anyone have a clue why I cannot get the other computers to see the network printer. Also Windows 7's network map doesn't see any of the other computers on our network. When our dual boot computer(Vista/Windows 7) is in Vista mode all is fine but when I boot into Windows 7 it doen't see the other computers and visa versa..
View 2 Replies View RelatedI used an epson workforce 600 on a prior network. I changed providers and have created a new network. I cannot get the network to see the printer when I run the software. I am using windows 7.
View 1 Replies View RelatedI bought a HP LASER JET 1007. which is a USB 2.0 printer. i have two pc both are connected via a switch. There has a modem connected also in the switch which have a usb and a ethernet port. ethernet port is used to connect the modem to switch.. That means in my network i have 2pc and a modem connected. is there has any procedure to connect my printer to this network. I dont want to connect the printer in a pc, cz to access the printer i have to power on the pc always.
View 6 Replies View RelatedI we have a wireless network. all systems have xp windows. we have a printer hp laserjet 1320 that is installed on PC 1. i have a laptop connceted to that wireless network. i want to add the printer that is intsalled on PC 1. when i go to add printer, a list appear, i select the pc and go to add, but it ask for driver, when i put cd of the drivers, it dont find the driver and it shows me a message the "windows cant find the printer"
View 1 Replies View Relatedconfigure a network printer to a pc
View 1 Replies View RelatedI have a HP1315 printer which is shared on an XP box on our home network. I've added the printer but nothing prints - it spools and disappears. Printer works fine from the XP machines on the network therefore assume it's something related to my Windows 7 installation
View 9 Replies View RelatedI have a desktop computer. I have an older Epson printer attached to the parallel port. I also have a USB Canon Pixma IP4000 printer attached to the desktop..I have 3 other laptop computers which connect wirelessly. The desktop and 2 of the laptops connect fine to the Epson and the Canon printers. These are all XP.But my newest computer is a W7 computer. It recognizes the Epson and works fine with that.How do I get it to see and use the Canon printer (I think it used to work with it). When I try and add a printer and specifiy network printers it does not find the Canon.
View 1 Replies View RelatedI have a canon mp480 and I'm trying to set up the printer so I can print wireless like I had on my old vista op system but it seems canon mp480 does not support win 7. Does anyone know where I can get a driver for this to rectify this problem.
Look forward to your response.
in all builds up to and including 7077 my Canon MX700 network printer was recognized and worked like a charm, including the scanner etc.
Now on a clean install of the RC (build 7100) the Canon network scanning utility comes up with a message saying it has known problems and to contact Canon.
I have tried it in all compatibility modes, administrator, the latest Vista drivers etc from Canon. I did manage to get it installed and it can see the printer but it will not allocate a port for it. When I try to allocate the port it will not work.
Canon do not have any way to contact them other than by phone (good one Canon) and I really have not had the time to sit on the end of a phone wating for them to tell me Windows 7 is not supported.
Oh...this is in x32 and x64 I have tried both but back on x32 for the moment.
I might try the long way....by reinstalling 7077 and then upgrading to 7100 but that is a bit extreme.
Anyone else had similar problems and solved them or do I just have to wait patiently for Canon?
Printer will not print. HP laptop Pavilion G7 and HP 7210 all in one printer home network. It keeps reporting printer off line. Contact administrator. I am the administrator. I changed the wire, replugged the computer and printer, contacted " system not communicting" What do I do?
View 1 Replies View RelatedIs it required to be in the same Home network to be able to share a printer?Or can both computers be in a public network only?
View 1 Replies View Related
