Need A CPU Temperature Monitor
Nov 15, 2009Tried Motherboard Monitor 5370, but it won't load the driver & hangs
my system. Had to uninstall it. Anything else work???
Running Q6600 on Gigabyte GA-P31-S3G mobo. No OC. Windows 7 64 bit
Tried Motherboard Monitor 5370, but it won't load the driver & hangs
my system. Had to uninstall it. Anything else work???
Running Q6600 on Gigabyte GA-P31-S3G mobo. No OC. Windows 7 64 bit
what free cpu temp monitor is best
View 3 Replies View RelatedI received this error twice today for the first time in ten years (CPU Over Temperature Error! Press F1 to Resume)I am using w7 32bit and I also checked to see if all my fans were working and they where.
View 1 Replies View RelatedI received this error twice today for the first time in ten years (CPU Over Temperature Error! Press F1 to Resume) I am using w7 32bit and I also checked to see if all my fans were working and they where.
View 5 Replies View RelatedIs there anyway that I can check my RAM temperatures?
View 3 Replies View RelatedMy CPU goes up to 76C when it is operating at 100% . Core 2 duo 2.0. Is this ok?
View 3 Replies View RelatedI am trying to find out why I can not get a temperature reading on my processor and/or the 4 cores. It doesn't matter what program I use...Core Temp, HWiNFO, OverDrive... they all show 0 degrees. [code]
View 4 Replies View Relatedis 84 degrees Fahrenheit too hot for an Intel I-7 quad core
View 1 Replies View RelatedSo, i just checked the GPU-Z and it says my graphics card temp is 74C
So, my question: is that a lot?
If not, how much is a lot?
What is normal?
And what is low?
What is the maximum operating temperature for the i7-3770k? And what would happen when it reaches it?
View 3 Replies View RelatedWhen using an i7, whats the safe temperature limit while gaming? I mean the maximum you can go without having to worry about getting a cool pad etc?
View 6 Replies View RelatedNormal temperature of zotac list?
View 1 Replies View RelatedCore-i7 860
Gigabyte motherboard
Water-cooling (Corsair Hydro series)
Windows 7 64bit ultimate
Non-overclocked
I've had my system for 2 years now, and only recently did this problem start. I use Realtemp to show my CPU temperature at all times. On average, my idle temp is between 25-35C (depending on ambient temperature). On heavy loads it goes to maybe 60C Every night, I put my computer to sleep (I almost never shut it down before going to bed). Recently, when I resume it the next day, I see the CPU temperature steadily climbing. Going past 50, 55, 60, 65, at which point I immediately shut down my system. (power off)
I have a quick question,I bought a used Laptop. Is it normal for my CPU to run cooler than my Video Card ?
HP dv6000 :-
VideoCard - 61 degrees
CPU - 53 degrees
After a ton of speculation, a bit of denial, and a ton of testing we finally have our answer. The thermal interface material change made by Intel when it went from Sandy Bridge to Ivy Bridge is indeed the cause of the excessive temperatures weve observed while overclocking. The first accusation was made in late-April by Overclockers.com, however proving it wasn't easy. The Japanese division of PC Watch somehow managed to remove the integrated heat spreader from a Core i7 3770k, along with the stock binding and grease. They then proceed to replace it with aftermarket alternatives, and the results speak for themselves.
View 9 Replies View RelatedI suddenly get this BSOD on my laptop this morning . It was fine for 4 months . Then my little brother plays some games ( Torchlight 2 , some mini games from Popcap ) The laptop gets BSOD .
View 3 Replies View RelatedMy old computer's temperature sensor is either broken or I am doing something wrong. The general specs of it are:
Windows 7 Ultimate Edition
Intel 946G Motherboard
Pentium D 820 2.8Ghz
3 GB DDR2 533 Ram
ATI Radeon x1650 pro
When I go into bios and read the cpu temperature from there, it starts at around 70C and slowly rises until it eventually hits 100C and shuts down. This takes about 5-10 min before it hits 100C. When I enter Windows, it starts at around 60C and it actually goes up to 80C when I am playing games. This is way hotter than normal. It does not rise like in bios and goes back to 60C when idle. Prior to this, the temperature actually hit 100C and it shut down my computer. I bought a new heatsink thinking it would solve the problem, but clearly it did not. The temperature is still too hot.
Since a brand new heatsink did not work, I thought it was cpu problem for sure. I borrowed one of my friend's Celeron D and installed it. I entered bios and what do you know, it stays at 42C and does not even budge. So at this point, I'm 100% sure it's a cpu problem. I decided to buy an intel pentium D 945 3.4Ghz. I installed it and was extremely happy thinking my cpu's temperature would be decent. I entered bios and what do you know, it does exactly the same thing my 820 2.8Ghz did. It starts around 70C and the damn thing keeps on rising. So I decided to go into windows to see how the temperatures were in there. It idles at around 47-49C. When I ran prime95 for a test, the cpu went all the way up to 93C before I decided to shut it off and not do any further damage.
My issue is that my fan runs very loudly and does not turn off during idle/slow periods. I downloaded the speedfan program and this is how it looks currently. [URL]I don't think the difference between idle and running Chrome + Steam in the background would be enough to matter, so i'm not in a completely idle mode now. This is essentially my constant setup.I'm rather inept when it comes to these things so i'm really not sure if this is even a problem or not. I know that cpu fans are always running, but i can't imagine 2800-2900 rpm being an idle speed. My temperatures are stable(as far as i know) and they only get to about 45% during heavier cpu usage. I cleaned out the dust in the system, but i think i may have missed the heatsink or whatever itself.I have also heard that doing a disk cleanup and defragmentation can solve the issue of a fan running constantly, however, doing that did not seem to help.
View 5 Replies View RelatedMy new nVIDIA GTX 560 Ti is running real weird, it quickly rises upto 45+ celsius (don't know if that's normal) and sometime it locks up my PC. I am running the latest nVIDIA driver, any help? It's not overclocked.
View 1 Replies View RelatedI just cleaned my laptop and it released a lot of dust, so my temperature is lower. The weather is currently very, very, very hot and my laptop is running 55-60C normally when i browse the internet, in a very hot room. Before i cleaned it - it was very hotter. I'm even sweating and i don't wear a shirt. But that's not the point. I i am running prime95 to test the processor, and after 1 minute of 100% usage it gets to 90C in the hot room again. But when i go to a clearly cold room, it doesn't turn off, it barely reaches 80-85C but never the maximum 90C.are the fans not spinning correctly or is the room temperature really important for a laptop?
View 2 Replies View RelatedI bought my new computer with Windows 7 Home Basic and it runs great. I like the gadgets but have a question. My CPU temperature is about 140 degrees, and when I run a high-tech game it rises to 160 degrees. It runs fine, but is this what the rest of you are getting?
View 9 Replies View RelatedI overclocked my cpu to 3GHz along with RAM (running at 1333MHz). Did stress test for 9 and half hours and everything seems stable. Prime 95 doesn't show any errors and max temperature it reached was 48. I also did winsat mem test but max it goes was upto 5960.97MB/s (Without OC, it scores upto 4721 MB/s). I'm pretty sure my ram is capable of running higher.
View 9 Replies View RelatedMy cpu temp is around 60 celsius and hard disk is around 50 Celsius in normal usage.should I buy cooling pad or is it not needed?
View 1 Replies View RelatedI have a three monitor set up. Whenever I open up a browser, either internet explorer or google chrome on monitors 2 and 3, after a few seconds it automatically drags my browser into my main monitor(monitor 1, where my start button and status bar is located)
View 3 Replies View RelatedI have a setup with 6 monitors. Today my main monitor broke and I couldn't find a way to shut the PC down since I couldn't access the main desktop to get to the Start menu.Is there a way to change which monitor is the main monitor without having access to the current main monitor?
View 5 Replies View RelatedI am running a dual monitor setup with my TV hooked up via HDMI to my laptop.
Everything was working fine before, I always had the laptop as my main display yet I could play a video or a game fullscreen on the TV.
Since a couple of days, as soon as I put something in fullscreen, it immediately goes on my laptop, regardless if it's open on my TV or my laptop. I don't remember changing/installing anything that could've changed that...
I checked a bit in the AMD vision software and the Windows control pannel but I can't seem to solve my problem without switching my TV as the main display. I also made a quick search on google as well as here but the problems were mainly with Flash, which isn't in cause here.
Here are my system specs:
Toshiba Satellite L75D
Windows 7 home premium 64-bit
AMD Radeon 6520G
I have just did a clean install of Windows 7 ultimate from XP and I am unable to get my dual monitors to work like they did in XP.
I have a DVI Radeon graphics card plugged into the agp slot, and a Nvidia geforce vga adapter plugged into a pci slot of my dell optiplex 755. When I am in the screen resolution settings the second monitor cannot be detected.
In bios I have 2 options under primary video adapter and they are auto, and onboard card. When set to auto the Nvidia card gets a signal but the Radeon does not. There are no conflicts in the device manager, and all of the drivers are up to date.
When I change the bios option to onboard card the Radeon adapter gets a signal but the other monitor cannot be detected and in device manager there is a yellow exclamation mark next to Standard VGA adapter and a code 10 error that states the device could not be started.
I have powered down, and unplugged every cable, I also tried to use the integrated VGA adapter to the Intel G31/G33/Q33/Q35 Graphics Controller but the computer will not even boot. I get
"System Halted
Attention Unsupported Video Configuration Detected"
I have two monitors, both work fine as standalone but Windows will not detect either as a secondary.
Please help me someone, I am so used to having my helpdesk email open in one monitor and all of my other work in the other monitor.
This computer is running an ATI Radeon HD 2400 Pro. It does support dual monitors...(I've had dual monitors active on this card before, but never on Windows 7.) But since installing windows 7, I can't even get it to detect the second monitor. I want to run the setup with the CRT as the primary monitor and the HD as the secondary.
View 7 Replies View RelatedI recently had an older HP Pavilion Media Center m7760n Desktop PC rebuilt. The old power supply fried the motherboard so I need to get a new power supply and motherboard. Here are my current specs.
Mainboard : Asus P5QPL-VM EPU
Chipset : Intel G41
Processor : Intel Core 2 Duo E6420 @ 2133 MHz
Physical Memory : 2048 MB (2 x 1024 DDR2-SDRAM )
Video Card : Intel(R) G41 Express Chipset (Microsoft Corporation - WDDM 1.1)
Hard Disk : WDC (1000 GB)
[code]....
As you can see from above, the "video card" is actually integrated into the motherboard.The computer works perfectly except for one major problem. I have 2 monitors, one is 22" with 1680 x 1050 resolution and the other is a 15" monitor with 1024 x 768 resolution. At the back of my computer I have a VGA port and a DVI port. The 15" is connected to the VGA port and the 22" is connected to the DVI port.When first starting the computer, the 15" monitor was recognized as the primary monitor while the 22" was recognized as the secondary monitor. No problem. I simply went to the display settings and set the 22" to be the primary monitor and the 15" to be the secondary monitor. Unfortunately, this setting seems to reset as soon as I reboot the computer. The 15" is always set as the primary monitor on start up, forcing me to set the proper settings all over again. What's worse is that even after I have set the proper settings, they sometimes revert back when using Media Center or other programs. Worse yet, sometimes the monitors both go completely black ... as if the monitor settings were about to switch but got locked up some how.I'm assuming that perhaps the on board video has a primary port (VGA) and a secondary port (DVI) but even still, shouldn't Windows 7 be able to over-ride this and save these settings so that the monitor settings remain the same during startup and regular usage?
I am really perplexed as to what is going on with a Documents folder. It's not MY DOCUMENTS, but rather, the Libraries-Documents folder (versus the my documents under my user profile/name).The folder is FULL of garbage.This includes things that appear to be "temp files" (but with valid file types such as jpg, mp3)also in there doc files, png, tdb, diz, ebc, and others I don't even recognize. Some of these things include package files from the Sims series games (there were a TON of them in there) and others included pictures that I did NOT save locally (as if it were a temp file from the web)There are even many duplicates of some of these pictures. Some I *DID* save as part of a genealogy project, but I didn't save them there.I saved them in a completely different folder with a completely different name.I've got a LOT of work ahead of me cleaning this sucker out (thousands of files to the tune of 16.5gigs...seriously).How are these files getting here and how can I prevent it from happening again?
View 10 Replies View RelatedI'm using a television (32p) as a second monitor in extended mode so that I can watch a movie in the TV and play a game in the monitor (this was my main goal). Monitor and TV lays in two different ambients, both connected to the same pc, one by normal VGA cable and the other by HDMI. I managed to differentiate the audio output so that VLC player sends it's audio to the HDMI (so that only the TV plays it) and the rest of system sounds, media players and games outputs to the speakers (basically only the VLC audio is directed to another output device). I reached my goal so that I can watch a movie fullscreen in the TV and play a game in the monitor fullscreen too without any interference from one another (nor audio or video).
The thing is, because I have the TV in another ambient I can't actually see what's going on in it, as I just "throw" the VLC window to the TV from my main monitor. And here's the question: There's a way to see the TV's desktop in my monitor? Without having to set it as main monitor so to not really switch between desktops.. The perfect thing would be if I could see the TV's desktop in a window like in remote desktops applications.