I received this error twice today for the first time in ten years (CPU Over Temperature Error! Press F1 to Resume)I am using w7 32bit and I also checked to see if all my fans were working and they where.
I received this error twice today for the first time in ten years (CPU Over Temperature Error! Press F1 to Resume) I am using w7 32bit and I also checked to see if all my fans were working and they where.
I am trying to find out why I can not get a temperature reading on my processor and/or the 4 cores. It doesn't matter what program I use...Core Temp, HWiNFO, OverDrive... they all show 0 degrees. [code]
I've had my system for 2 years now, and only recently did this problem start. I use Realtemp to show my CPU temperature at all times. On average, my idle temp is between 25-35C (depending on ambient temperature). On heavy loads it goes to maybe 60C Every night, I put my computer to sleep (I almost never shut it down before going to bed). Recently, when I resume it the next day, I see the CPU temperature steadily climbing. Going past 50, 55, 60, 65, at which point I immediately shut down my system. (power off)
After a ton of speculation, a bit of denial, and a ton of testing we finally have our answer. The thermal interface material change made by Intel when it went from Sandy Bridge to Ivy Bridge is indeed the cause of the excessive temperatures weve observed while overclocking. The first accusation was made in late-April by Overclockers.com, however proving it wasn't easy. The Japanese division of PC Watch somehow managed to remove the integrated heat spreader from a Core i7 3770k, along with the stock binding and grease. They then proceed to replace it with aftermarket alternatives, and the results speak for themselves.
I suddenly get this BSOD on my laptop this morning . It was fine for 4 months . Then my little brother plays some games ( Torchlight 2 , some mini games from Popcap ) The laptop gets BSOD .
My old computer's temperature sensor is either broken or I am doing something wrong. The general specs of it are:
Windows 7 Ultimate Edition Intel 946G Motherboard Pentium D 820 2.8Ghz 3 GB DDR2 533 Ram ATI Radeon x1650 pro
When I go into bios and read the cpu temperature from there, it starts at around 70C and slowly rises until it eventually hits 100C and shuts down. This takes about 5-10 min before it hits 100C. When I enter Windows, it starts at around 60C and it actually goes up to 80C when I am playing games. This is way hotter than normal. It does not rise like in bios and goes back to 60C when idle. Prior to this, the temperature actually hit 100C and it shut down my computer. I bought a new heatsink thinking it would solve the problem, but clearly it did not. The temperature is still too hot.
Since a brand new heatsink did not work, I thought it was cpu problem for sure. I borrowed one of my friend's Celeron D and installed it. I entered bios and what do you know, it stays at 42C and does not even budge. So at this point, I'm 100% sure it's a cpu problem. I decided to buy an intel pentium D 945 3.4Ghz. I installed it and was extremely happy thinking my cpu's temperature would be decent. I entered bios and what do you know, it does exactly the same thing my 820 2.8Ghz did. It starts around 70C and the damn thing keeps on rising. So I decided to go into windows to see how the temperatures were in there. It idles at around 47-49C. When I ran prime95 for a test, the cpu went all the way up to 93C before I decided to shut it off and not do any further damage.
My issue is that my fan runs very loudly and does not turn off during idle/slow periods. I downloaded the speedfan program and this is how it looks currently. [URL]I don't think the difference between idle and running Chrome + Steam in the background would be enough to matter, so i'm not in a completely idle mode now. This is essentially my constant setup.I'm rather inept when it comes to these things so i'm really not sure if this is even a problem or not. I know that cpu fans are always running, but i can't imagine 2800-2900 rpm being an idle speed. My temperatures are stable(as far as i know) and they only get to about 45% during heavier cpu usage. I cleaned out the dust in the system, but i think i may have missed the heatsink or whatever itself.I have also heard that doing a disk cleanup and defragmentation can solve the issue of a fan running constantly, however, doing that did not seem to help.
My new nVIDIA GTX 560 Ti is running real weird, it quickly rises upto 45+ celsius (don't know if that's normal) and sometime it locks up my PC. I am running the latest nVIDIA driver, any help? It's not overclocked.
I just cleaned my laptop and it released a lot of dust, so my temperature is lower. The weather is currently very, very, very hot and my laptop is running 55-60C normally when i browse the internet, in a very hot room. Before i cleaned it - it was very hotter. I'm even sweating and i don't wear a shirt. But that's not the point. I i am running prime95 to test the processor, and after 1 minute of 100% usage it gets to 90C in the hot room again. But when i go to a clearly cold room, it doesn't turn off, it barely reaches 80-85C but never the maximum 90C.are the fans not spinning correctly or is the room temperature really important for a laptop?
I bought my new computer with Windows 7 Home Basic and it runs great. I like the gadgets but have a question. My CPU temperature is about 140 degrees, and when I run a high-tech game it rises to 160 degrees. It runs fine, but is this what the rest of you are getting?
I overclocked my cpu to 3GHz along with RAM (running at 1333MHz). Did stress test for 9 and half hours and everything seems stable. Prime 95 doesn't show any errors and max temperature it reached was 48. I also did winsat mem test but max it goes was upto 5960.97MB/s (Without OC, it scores upto 4721 MB/s). I'm pretty sure my ram is capable of running higher.
I am really perplexed as to what is going on with a Documents folder. It's not MY DOCUMENTS, but rather, the Libraries-Documents folder (versus the my documents under my user profile/name).The folder is FULL of garbage.This includes things that appear to be "temp files" (but with valid file types such as jpg, mp3)also in there doc files, png, tdb, diz, ebc, and others I don't even recognize. Some of these things include package files from the Sims series games (there were a TON of them in there) and others included pictures that I did NOT save locally (as if it were a temp file from the web)There are even many duplicates of some of these pictures. Some I *DID* save as part of a genealogy project, but I didn't save them there.I saved them in a completely different folder with a completely different name.I've got a LOT of work ahead of me cleaning this sucker out (thousands of files to the tune of 16.5gigs...seriously).How are these files getting here and how can I prevent it from happening again?
i recently got a computer from my aunt, and decided to put windows 7 on it. Before I installed it, I put in a Geforce 8800 graphics card and a (2nd) cd rom drive. After 20 failed attempts to install windows 7 (it kept freezing at the completing installation part) it worked after i disconnected the new graphics card and one of the hard drives. Now, however, i keep on getting periodic blue screens with the following error messages : Memory Management, and PFN_List Corrupt. I ran a memory diagnostic and it said that the memory is fine. What is wrong with my computer? I also ran a system repair thing from the windows 7 disk, and it came up with this error: System File Integrity Check and Repair Error Code 0X490
My Hardware is:
AMD Anthlon 64 x2 Dual Core Processor 6000+ 2 Hitachi HDT725032VLA SCSI 320 gb hard drives Nvidia Geforce 8800 GS Graphics Card 3gb of system memory
when i click format a 150 gb partition space in disk management option i recieved the following message "An unexpected error has occurred. Check the System Event Log for more information on the error. Close the Disk Management console, then restart Disk Management or restart the computer". and the drive does not appear like other drives in MY Computer?
I have already reported to Sony to but i heard their take their time but thats the one thing what i dont have at the moment so i know many people here know about that stuff to. So anyway. Some time ago SP1 launched for Windows 7. I installed but it but something went it wrong and it didn't install correcly and then i was forced to use System restore. Everything worked and i haven't used SP1 because i don't want to risk screwing up my computer before some important things, i got plenty of time later for that . The problem is after the system restore every time Vegas launches i get a error : Sony Vegas pro 10 an error occurred starting Vegas Pro Error 0x80070002 (message missing).
i have a toshibio satelite model # psc16c02q00m, I've tried to reformat my computer, i have the back up Disk and when i started my computer i press F12 to get the boot bios where i made it boot from disk putting my back up cd#1 into there. it was working fine till i put in disk three, from there i got a F3-F200-002 Error said an error has occurred please press OK to turn off the computer. and that is the only option. ive tried repeating the process but now all i get to is this screen even when i try to but off the hard drive im assuming my windows has been cleaned.
Recently whenever I've used an .exe installer I'll get an error as soon as I click start after choosing the directory, in the picture example I include below, it's of SA-MP, but it happens with any installer I try and use. Installers have worked previously, it's only recently it's stopped working.The error is;Error opening files for writing?
What I've tried;
-Full system scan with Comodo AV.
-Revealed hidden files and folders.
-Run the installer in both compatability (Even though it does work on Windows 7, and as an Administrator).
-Also done the scan on CMD (can't remember exact command).
I am trying to run a certain program and it worked previously for a few days, and then today all of the sudden its giving me this error.Is this a windows thing I can try and fix? Or is it program specific (this program doesnt have much support unfortunately)
I recently re-installed windows and am now trying to install the DirectX End-User Runtimes (June 2010). All goes well, it installs everything, but as it finished I get this error: I have tried redownloading, using other installers and updating my graphics drivers. Nothing will work. It's probably worth mentioning that the first time I tried installing, about a week ago, my computer totally froze in the middle of the install and I had to force restart.