I have an HP Elitebook laptop. I got it new about 2 years ago and have had it attached to a docking station since I bought it. Connected to the docking station is an external hard drive where I store a complete backup of my laptop (I use the program "Norton Ghost"). I should probably also mention that the HP laptop used to have Windows Vista installed on it. I installed Windows 7 over it.
The Problem Recently when booting my computer I have noticed that I sometimes get a NTLDR or non-system disk error. Two things confuse me about this:
1) They only started within the last 4 months. I haven't changed anything.
2) They are random and don't always occur.
My attempts First off, here is my current boot order:
Notebook Hard Drive
Notebook Upgrade Bay
USB CD Rom
USB Floppy
External SATA
USB Hard Drive
Docking station upgrade bay
... some other stuff
Playing around with the boot order yields interesting results. If I change the order, the NTLDR error will disappear an the non-system disk error will appear and vice-versa.
I have been having a bit of trouble with windows 7 lately, namely that it won't start up right. When I boot from the drive normally, it gives me the classic "BOOT DISK ERROR: INSERT SYSTEM DISK AND PRESS ENTER" message.
However, I soon discovered that if I boot from the Windows 7 cd and do not boot from it (By ignoring the "Press a key to boot from CD or DVD..." Windows 7 boots up fine. I've tweaked my BIOS over and over, but the same problem persists. The drive is brand new and fine. What can I do?
I recently tried to install a mac osx on my computer that was currently running windows 7. I created a separate partition on my 320GB hard drive that was unallocated space until I partitioned it. After I installed it, when I tried booting into that hard drive, I got the non-system disk error. I went back into the mac osx install disk and erased the osx installation.
I then put in the windows 7 installation disk and clicked repair my system. It searched for startup errors and found that the Boot Manager was missing or corrupt. Is there any way I can reinstall the Boot Manager without reinstalling all of Windows 7? I ran the startup repair a few times until it could not find any problems. Now it says: Disk Error. Press any key to restart.
Here are the drives I have on my computer: -Windows 7 installed on a 1TB drive -Windows XP on a 500gb drive -2TB drive for storage. -1TB drive for storage -500GB drive for storage
Windows 7 was installed before XP, and I believe XP came after the physical installation of the 2TB drive. I always have to press F8, and then select the first hard drive in the list, and then I'd be able to select to boot "Windows 7." Otherwise it'd give me "boot disk boot error, please insert system disk." The drive I'm selecting is my 2TB drive. My computer won't boot if the 2TB isn't plugged in. I've tried Option One and Two from here with no luck: [URL].
i am using windows 7 os. Actulay i format the system. after formating system whn i login , i am getting msg "windows detected hard disk problem and you may loss datas from ur drive c,d & e" bt my system condition is good.wt should i do for this?hw can i clear this error? pls help me
the tip to run SFC -- I'm not sure where the 'command prompt' is now in Windows 7.
What I did was search for sfc, right click, then run as administrator.
It appears something is running, but no window opened to ask or tell me anything. I checked Task Mgr and Resource Monitor and can't find anything resembling SFC, but there is activity even tho' I'm not doing anything else. The hard drive light is also flickering about once per second. What should I expect? Do I just wait patiently? How can I confirm SFC is running and fixing any errors?
I just attempted to use Partition Wizard to repair my MBR after installing Ubuntu and having issues with a BSOD in Windows (0xC0000225).Now when I reboot all I get is "Non-System disk or disk error." I can't run fixmbr using a recovery disk because apparently that command no longer exists!
I'm writing about my brother's Samsung R780 laptop (running Windows 7 64 bit), which recently stopped working. When he starts the computer, he gets the following error: "Windows Error Recovery." Searching around online led us to create a system repair disk on my laptop (which also runs Windows 7). When we boot with the disk in the drive, a prompt asking for our language (which is greyed out so we can't change it) and our keyboard (which we can change) appears. Without changing the keyboard option, we press 'next' and then it freezes. We've also tried the 'repair your computer' option in the Advanced Boot Options, but it also freezes.
I have this laptop with Windows 7 as the operating system and with a capacity of 500 GB. My HDD was making loud noises and weird noises so I brought it to the shop and they told me to change the HDD because it might die anytime. So I did a full backup on my external hard disk, meaning that I cloned my laptop. I changed my 500gb HDD with a 240gb SSD. And when I tried to restore my backup files into the new drive, there's an error: "no disk that can be used for recovering the system disk can be found".
So I did some research on the internet and found out the reason of the error: it's because the image created was from a bigger drive than the new drive I put into my laptop. Even though my backup files are only about 100gb, I still cant restore it to my 240gb SSD because the image created was from my 500gb HDD. I am going to copy my backup files into an external hardisk with a capacity of 200gb and then backup from that drive and then I will restore it into my 240gb SSD. Will the backup file be considered as a backup from the 200gb drive or from the original 500gb HDD?
I recently did a whole new build, new hard drive, mobo (GA-P35-DS3L/S3L) and processor. The problem is, I'm trying to install Windows 7 Ultimate and I come up with "Insert system disk and press enter" error when I try to boot from the disk. I checked the BIOS and the mobo had recognized the DVD drive and the hard drive. I tried putting the hard drive under slave and the DVD drive under master, and vice-versa. I am a high school student who generally gets lots of home work, so it would be nice to be able to type out my work.
im usin 2tb segate new hard disk sir..in my system i cant able to boot my os and also my hard disk...its showin that hard disk boot failure insert system disk press enter ...i restarted many times its sayin the same problem...in my gigabite mobo bios my hard disk is not get detected sir....the problem is that wen im installin the new os for 2nd time its all went nice only sir but at the completion of the os it wil ask for the user name and password but in my system its frozen sir fully of black screen and i cant able to do anythin so i restarted my system from that im gettin this error as hard disk boot failure insert system disk press enter.....that my new hard disk and all of my data is in that hard disk only..this problem arises wen im installing the os for 2nd time sir.
I woke up this morning, and I found that my computer was displaying this message"Disk boot failure, insert system disk and press enter". There are a ton of needed documents on the computer, and I'm hoping that they can be saved some way.
I've been having this error even after reformatting and reinstalling Windows 7 on my desktop. I've done reformatting / reinstalling Windows 7 several times, yet the problem still occurs. I'm thinking of my HDD as being corrupted or messed up. The problem occurred after I accidentally hit the CPU when I was stretching my foot. The screen froze after that. Upon rebooting it, 'Disk boot failure, Insert system disk and press enter' occurs. After I entered the DVD installer of Windows 7, the screen just hangs.
My friend bought a new PC and needed to put am OS on it. He put in the W7 disk and the error message 'disk boot failure insert system disk and press enter' appeared before installation was shown. He has tried changing around BIOS and it also recognises the hard drive and DVD/ CD ROM drive. Here is the specification he was given:Case : CIT Reaper Black Mesh fronted Tower CaseMotherboard : Gigabyte 78LMT Motherboard TechnologyCPU : AMD Bulldozer FX 4170 4.2ghz 8mb CacheHard Drive : 1tb Sata Hard DriveMemory : 8gb DDR3 1600mhz MemoryOptical Drive : 24x Dual Layer Sata DVD WriterGraphics Card : Nvidia Geforce GTX 650 2gb GDDR5 With HDMIPower Supply : 750 Watt Branded Power Supply Also, he has tried booting BIOS in different order
When starting the computer, I keep getting "Disk boot failure, insert system disk and press enter". Nothing works other than putting in the boot disk and hitting the restart button on the tower. Then it will boot up and run fine. But how do I stop it from having to have the disk in order to load? Checked in the BIOS and the hard drive is the first load.
I was going to make a disk image of a fresh Windows 7/64 install but when attempting to do so using the windows utility it insists on labeling and including in the image a completely separate data-only disk claiming it is also a system disk. Unfortunately it will not allow me to un-check for purposes of exclusion.
Probably should be looking at the root of the problem and determine why this Data Disk is labeled a System Disk. It is an older drive and has been used in a couple computer builds so may have at one time had an OS installed but I can find no indication of such, plus, I usually format before re-purposing.
I have IOmega 1 TB hard drive. 2 days ago, my comp restarted suddenly after which my external drive is corrupted.I get the error 'H: is not accessble' The disk structure is corrupted and unreadable.It shows up in the disk management as RAW file system,I have almost 700 GB of important documents, pictures & files that I don't want to lose.Does anybody know of any good recovery software that can help.
Using preinstalled Win 7 Home Premium 64bit on an HP 6813w Pavilion. The original hard drive, a Hitachi HDS721010CLA332 1Tb crashed.1) System Recovery discs was made along with a System Recovery with System Image disc.2) A more current System Image was made on an external hard drive.The Hitachi was replaced with the same model. Checked bios to make sure it was installed correctly.Under System Recovery, Image Restore, Select a System Image Backup there is nothing in the table to choose from as far as a source (disc drive or external drive).A) System Recovery (3 discs) has the HP preinstall file folder on the 3rd disc but is not read by the System Recovery program.B) Under System Restore, Image Restore, Advanced, it asks for a network or driver to be installed. That opens up the directory of C: which is the external hard drive. Under WindowsImageBackup the computer name is identified followed by three entries:[CODE]It seems to me the Recovery and System Restore discs are not functional. Am not a technical person but I have taken this as far as I know how at this point.Printed out all the instructions from HP and Microsoft to follow step by step but the failed discs will not allow me to move forward.
i have a toshiba satellite C650 that has recently come up with a disk read error. I want to access the command prompt to try some potential solutions that I have read about on the internet. I have made a Windows 7 recovery disk using my other acer laptop which also has Windows 7 installed. When I use the recovery disk and it has loaded the files etc it just brings up a black screen and the cursor. I tried booting my acer laptop from the recovery disk and it worked fine. why I am getting the 'disk read error - hit ctrl, alt and delete to restart' message?
I want to do a 'custom' reinstall on my C: drive. It's clogged with unused programs and it runs very slow.I set the BOIS to boot from HD and CD; neither worked. I purchased a new HD and may want to install it as my C: drive.I set the BOIS to boot from CD; still I get the dreaded message:"Disk boot failure insert system disk and and press enter"I recently installed a new mother board due to the fact it was defective, not as an upgrade.To make it clear I already had Win7 Ultimate installed. On my first attempt to perform #1 I got to the question of which install did I want; I clicked 'custom'. From then on nothing happened, and now I keep getting "THE DREADED MESSAGE".I put my win7 disk in another OSXP computer and it displayed, "This disk is not compatible with this system" so I assumed my disc was not corrupt.I bought my win7 disk legally on line a couple of years ago, and I have used it once. Will that be the problem? I never got to the "License key" so I don't see how it could be?
I've just recieved Windows 7 Ultimate but when I try and boot it from the CD it comes up with the error message'NTLDR is missing press ctrl alt del to restart'.The confusing part of this is that I've not yet installed the OS, this is after I select which drive to boot from, but before the Install page comes up.I've also tried installing from my current Windows XP OS, but when I do so it comes up with the error code 0x80070490 ~ which means it can't 'Find a location to store temporary installation files.'[code] It's not a matter of me burning a bad .iso file as I bought the DVDs whole from Microsoft, so I neither downloaded or burnt them.
I have 3 physical hard drives, we'll call them A, B, and C. Hard Drive A has a partition for Windows 7, a NTFS partition for storage, a EXT3 (Linux), and swap (Linux). Hard Drive B has 1 NTFS for storage. Hard Drive C has 1 NTFS for storage. I am trying to replace Hard Drive B (with nothing related to Windows 7 on it) and when I try to boot into Windows with my new blank drive installed I get "NTLDR is missing." From what I've read NTLDR was only used up to Windows XP. The drive I am trying to remove isn't even associated with Windows 7 anyway. When I put Drive B back in everything works fine again. why I cant remove drive B even though it has nothing to do with the physical or logical drive containing Windows 7?
Whenever I encounter a boot error like these, my first course of action is to scan the hard drive. I have done too many re-installs that have failed, fixes that only 1/2 work, and so on and so forth because the hard drive has been bad. So, the question is, are these stored right at the beginning of the drive? Or is there not specific place for them? Essentially, if I scan the first GB Of a HDD, and it doesn't find any errors, is it safe to assume that the NTLDR or the BOOTMGR isn't corrupt as a result of a defective HDD?
I installed Windows 7 again after a couple months on XP, and I was just getting everything moved and copied from my secondary hard drive which stores my Acronis backups, and all of my data.The last thing I did was install Acronis, which wanted me to restart my PC. No problem, it worked just fine. Made a backup, and turned on Acronis Startup Recovery Manager (ASRM)... Everything worked perfect until I restarted for some reason, I don't remember what it was... I got NTLDR Is Missing, press Alt+Ctrl+Del to restart So I did, and it came up again, and couldn't find a way to fix it...Even trying to use "fixmbr" from a Win2000 disc's console didn't work, which usually, it fixes things like that.... I set it down for the night...Woke up, and had the strange idea of unplugging and removing the hard drive that contains my data files and Acronis Secure Zone.... And wow, It worked...how can I plug my hard drive back in and be able to boot up? Remove Acronis? Turn off ASRM?
I have used wintoflash to make a bootable usb to install win 7 but when I restart the pc to begin the installation I received the messege ntldr is missing
I recently installed windows 7 on my Seagate hdd while the Samsung hdd was connected.Unfortunately,my samsung hdd is starting to die so I have to remove it for RMA. But when I remove it,my pc shows ntldr not found.While when I reconnects the Samsung hdd,it boots normal. Does it means that the Samsung hdd contains the bootloader files.If so,How can i transfer them to my seagate hdd(the one which has the OS) to allow the pc to boot without the Samsung hdd(faulty one)..
