I have a desktop computer running Windows 7 that I've got setup to automatically login on boot for the kids to use. I am now using Plex as my Media server and this requires you to be logged-in to run it - it can't run as a service using SrvAny or other such tweaks. What I'm after is a way of automatically logging in the computer on-boot to both user accounts.
View 3 Repliesi would like to know if their is a way to create an automated task or automated rule, to be able to do something like once i close a web browser the computer would automatically clear dns.I'm pretty sure i can use the task scheduler as this would be even triggered.
View 2 Replies View RelatedWhen I open a windows office file from the internet (Word or Powerpoint) and I then I go to save it via "save as", it automatically opens the temp file as the save destination, not the folder I most recently had open, or the folder where I've saved the previous 20 files I've downloaded.
Is there a way to direct the default save file to open not as temp but as what I want it to?
I've installed an extra font that I need for an application (LiberationSansNarrow). This font is available in the application, in Notepad, and shows up in the Control Panel / Fonts utility.However, when I run a task automatically using Task Scheduler, the font is not available to the application (as is evident in the output files). It IS available if I run the same task manually, from a command window; the task is simply a script that calls some python code.The job run by Task Scheduler is run with the highest privileges box checked, and runs as a domain/active directory user (not a local user), but this is the same user who installed the font, and that user has full Administrator privileges.When I look at the font directory listing in a command window with dir /q, it shows the owner as "BUILTINAdministrators". Other fonts (installed with Win7 presumably) show up as either that, or "NT SERVICETrusted", including Arial, which works in the application under Scheduled Tasks. [code] Any clues on how to either change the owner of the font files of interest, and who that owner should be, or other possible solutions? Right-clicking on the font file does not give you normal options (such as properties, where you might change the owner).
View 1 Replies View RelatedMy netbook is samsung n100s. It has 3 partition. C and D are primary partition and E is logical partition. My operating system is Windows 7 in C drive. Now i want to setup Windows XP in D drive. but when i install windows XP, windows 7 boot manager doesn't work and it directly boot from windows XP.
View 6 Replies View RelatedI am in the process of a Windows 7 reinstall but still want to keep data. So what I did was just reformat the hard drive into 2 partitions so I can transfer data over. Both of them have Windows 7 installed on them. The issue seems to be booting into which one, a small quirk I can't get around. If I boot the computer without the Win7 install disk it will use the old bootloader and boots into the old Windows 7, it won't let me select what I want to boot into (just old Win7). If I leave the Win7 install disk in it goes through and says "Press any key to boot from DVD or CD", then I don't press anything and let it time out. Then after it times out it will load from the hard drive, which causes it to load the new bootloader and obviously the new Windows 7 install. change the default bootloader to be the other partition?
View 3 Replies View RelatedCreated an additional partition and restored the old WINxp (Service Pack 3) into it from my old desktop I want to get rid of.Think the missing ingredient is I need to create a boot sector unless it already exists...then I need to edit it.My CPU is a Celeron - it can't multitask, therefore it can't use a virtual machineHow might I go about booting into different versions of Windows?
View 9 Replies View RelatedI have a WD hard drive that I have done a full partition on and will not repartition. I have a second drive that I probably can reinstall windows if need be. I have changed a lot with windows 7 I have added different themes, start orbs, explorer frames/navigation, and system icons. The problem is when my wife gets on it, she hates it. So I made a different user account so that it would be her own look and feel. However the icons and other things are changed in hers also. So my question is: is there a way to have each user load their own windows explorer.exe and other system3264 files for each user? Or is there a way that I can have it ask at the begging (much like choosing a user) which drive to boot from? She basically just uses regular standard windows, and I use mine which looks like: [URL] So the start orb and other folders and file icons transfer to hers as well. I know that she would be happy if there was a way that we could each have different looks. Again I do not want to partition my drive to dual boot.
View 3 Replies View RelatedWhen booting system sometimes I hit F9 to select boot device, when I want to boot from dvd or usb. Before you say I can list boot devices in bios I know this, the problem Is UEFI and Legacy my UEFI system is not secure boot and for whatever reason I have to F9 and manually select usb or dvd legacy, some versions of linux will not boot otherwise.
UEFI boot sources:
Windows boot manager
Linux Mint
Linux mint
[Code]....
Over the course of the last year I have dual booted several version of linux, but it seems that linux mint and ubuntu add entries to my UEFI boot sources list...how do I remove them, the list is getting to long, and currently only windows 7 is installed.
Hp Pavillion Slimline s5-1114 Bios version 7.16 Ps other than this annoying list the system boots fine right into windows.
Is it normal for Windows 7 Home Premium to have multiple boot options at the F8 safe mode menu? (I.e. "Enable boot Logging" "Dosable unsigned drivers" etc etc). I thought there were only three boot options: Safe Mode, Safe Mode with Networking, and Safe Mode with command line..... It seems my safe mode prompt has those three plus all the others.
View 2 Replies View Relatedi want to use my 400gb usb hd as suitcase for all matters.
how do i set up multiple partitions to boot from?
so that i have on bios boot menu a list of available drives
with options like install 7 32bit, 7 64bit, repair cd, partition tool, umbuntu, etc?
Would it be possible install Windows 8 on a separate partion using for example- 3 discs with different setup files on each one?
View 8 Replies View RelatedWe have three medical clinics and the front desk staff float from clinic to clinic depending on their schedule. I only started here a few months ago and I am working on upgrading their Dell xp systems to Windows 7 systems.The problem begins to crop up when say a user named Sally will come in and sit down at this system for the first time.. Well, she needs to login, click on outlook icon, let it find her exchange PST and copy settings to her user profile, then she launches the application for the scanner that she uses to scan in ID's and insurance cards for every patient coming in.. The scanner is set to default settings and needs to be tweaked on color depth and double sided, etc.. Then after that, she needs to launch her Medical EMR application.. and then choose various options in the citrix client, ..TL;DR - Each user needs to spend 20 minutes resetting the defaults at this updated system.
Well this is fine except, I am planning on updating 2 front desk systems at each clinic, the user Sally will need to do all these things EACH time she finds herself sitting down at a system I just swapped out the previous evening.My thought is this, put a single system down in one clinic and let it sit a week giving most of the float users a chance to work on it for a day, setting all of their preferences etc.Once I get a bunch of them with user profiles on the local drive, grab an image of that drive and just deploy that to each system I roll out..Couple issues I am running into:First would be that I would have to register each Windows 7 copy with a new serial, which I have The next issue is, we have a mis-mash of Dell optiplex systems. 330's - 380's even a couple 320's..
evertyime i load windows the boot manager pops up showing 6 different windows installations. I have been troublshooting of late so have been installing/reinstalling windows. The thing is, i have formated each prior installation before installing a new one yet boot manager keeps popping up during OS loading showing me several different options. All of them except for the most recent have no data showing the formating worked. How do i prevent boot manager from showing all these old installations?
View 4 Replies View RelatedI work at the IT department of a school where we have around 600 PC's that need to be maintained. Most things break by the kids and most is fixed my replacing, or simply imaging said computers again.However, after having switched over from Windows XP to Windows 7 we've been having masses of BSODs when loading Windows. Not just the normal PC's, not just linked to one type (although pretty much everything is from HP). But it keeps happening.The most common errors that we've been able to discover are:0x00000018, 0x0000000A, 0x0000007E, 0x000000BE.After having researched these things, they all turned out to have something to do with drivers, not only that, but when trying to boot into safe mode the PC's would all freeze at "classpnp.sys" and sometimes reboot shortly after.Our current solution is simply putting a new Windows 7 image over the computer and it'll work another day or two. It's great that it works again then, but we spend too much time on it.
It can't possibly be the hardware, there are too many different kinds of computers for it to be that. I'm quite sure the problem is somewhere originating from the drivers we install, but then he question comes as to what ruins the drivers? Not to mention that there are also different drivers for the different kinds of PC's.
So I tried installing Windows on my new machine and did waht seemed to be the recommended thing and plugged in only my SSD into the Sata port, leaving my other drives unplugged until after the installation. Everything went fine and I was able to get Windows 7 up, drivers were installing and everything was peachy, but Then I plugged in my other drives, and when I did so with the computer running Windows immediately recognized them and I could access them, as well as do whatever I wanted. However when I restarted I got the message BOOTMGR is missing.
Now, you may be thinking that this is a simple issue of it trying to load from one of those other HDDs, just set the boot order in the BIOS blah blah. But its not. I set the boot order in the BIOS to use the SSD, I set the SSD to the top of the list within the HDDS priority order and still nothing. I then took it a step further and instead of selecting the order manually told it to boot from the SSD flat out, boot from this drive and the same error message came up. I already did the boot from Windows disc, startup repair thing - didn't work.
I have just installed a new P5G41T-M LX Series motherboard and two DDR3 x 2GB replacing DDR2. During startup a message says BOOTMGR is missing, press Ctrl Alt Delete to restart, on restart the same message is repeated.
View 1 Replies View RelatedI am trying to get my wife's new computer up and running without any BSOD or program failures. Note that the system was not initially set up to capture the dmp files so all the earliest ones are missing. I presented the initial problems to the original seller who recommended sticking with MSE and uninstalling Norton 360 and I did that. Another forum suggested that Virtual Memory was the problem and I disabled and restored VM. Still having multiple crashes and I am hoping that I can get real help here. I do note that all the crashes have ntoskrnl.exe in the driver stack although sometimes alone and sometimes with other drivers.[CODE]
View 2 Replies View RelatedDoes anyone know how to schedule/automate a rollback to a system restore point at a set time each day?What i'm trying to do is:1. Disable the standard system restore behavior for creating restore points when installing apps and drivers.2. Automatically/schedule a restore point to be created every morning. (probably using Task Scheduler)3. Automatically/schedule a rollback to that morning restore point every night.This should allow users to mess up the workstation during the day, and restore a working rollback point at night when users are not using a workstation.Updates are scheduled at nighttime, so before that happens, it should rollback to a good restore point, apply updates, then create a working "new" restore point with the updates in the morning....etc.
View 4 Replies View RelatedI have been getting a fairly random blue screens and I cannot pin point it myself. I know a bit about diagnosing and repairing issues but this one is just a pain in my butt. I am uploading the dump files and I hope someone can give me a hand I am running a sfc scan right now to test for any problems too. Also got this off the TSG SysInfo Program.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD Athlon(tm) II X3 445 Processor, AMD64 Family 16 Model 5 Stepping 3
Processor Count: 3
RAM: 8191 Mb
Graphics Card: NVIDIA GeForce 9600 GT, 512 Mb
Hard Drives: C: Total - 476837 MB, Free - 246483 MB;
Motherboard: BIOSTAR Group, N68S3B
Antivirus: Norton Security Suite, Updated and Enabled
I have attached a second monitor to my laptop which runs Windows 7, however, I need to set different resolutions for different monitors, because the display does not fit to fill the screen on both monitors.
It is also noted that the display is replicated, and I would like to have the effect of having different desktops e.g. being able to use different applications such as debugging code on one monitor on an IDE such as Visual Studio, and, viewing the browser on the other monitor.
Currently it does not seem possible since the behavior seems to be that the same resolution is replicated on both monitors.
I use WhoCrashed to analyze these errors but I dont know how to solve. Maybe my hardware cause these.
Processor: Intel Core 2 Quad CPU @ 2.40 Ghz
Ram: 2GB Corsair
OS: Windows 7 Ultimate 32-bit
VGA: ASUS 8600 GTS
Mainboard: ASUS Striker Extreme
I'm having a bit of trouble trying to get two monitors, a small 1024x768 LCD, and a 46" 1920x1080 TV, to display the same wallpaper at different resolutions. My graphics card is older, a Nvidia Quadro FX 1700, but it is perfectly capable of driving both displays at the same time. It's a minor annoyance, but I'd like to get it working if it's possible.
View 4 Replies View RelatedIs there any box bundles that would let me install on multiple computers, looking at 3-10 computers here. Downloading is not an option.
View 11 Replies View RelatedFirst- if I have a maximized window open, any window that I open that's not maximized, opens and disappears to the taskbar icon for it
Second- I can't view more than one window of the same program at the same time. No matter how small I resize it, the second window sends the first window to it's taskbar icon.I've run sfc /scannow, scanned with Avast & Malwarebytes. Restored folder options in the view tab & set it to open in it's own window.
I have Windows 7 64 bit laptop - and suffered two crashes today, while it was generally idling. The only new thing today is that there were some Windows update last night and an Adobe Flash update this morning.
View 2 Replies View Relatedi have a HP laptop and it came with a windows 7 orginal DVD and key. my Question is im thinking of buying a new dell laptop which also comes with installed windows 7 but i wont get a free copy of windows 7 DVD. so should i burn my existing HP's win7 dvd to a blank disc and use that dvd to install windows if needed in my new laptop.. ofcourse ill use different keys cuz keys are always underneath the laptop.
so in short, if i do that i will be able to run geniune windows on both my laptops? use same win 7 dvd but using HP key in HP laptop and dell key in dell laptop?
I like the windows 7. It much faster.
But When i open Internet Explorer Window it opens a new window in first time and the IE icon in task bar is filled with IE windows, If i want to open another IE window, I have only 2 choices :
1. Open New window using File menu or
2. Right click IE Window on task bar and clicking IE.
Any one tell me how to open new IE window when first IE window is open, like opening multiple IE windows by clicking IE icon in taskbar.
Simply I want IE icon should be shown on Taskbar even mutiple IE windows open (Just like Vista and XP)
I would like to know how can I have two windows sessions active at the same time. I've found some tutorials in google with a installer file, but when I run it as admin although it says the operation was ok, there are some errors, and in the end I always get the common error when trying to connect two sessions at the same time.
View 2 Replies View Relatedi have two problems with my windows 7 64bit desktop the first is after 2 minutes of turning on it says no network access (my computer is wireless) and when i go to shut down it just displays the shutting down screen and nothing happens and it just goes on and on why is it doing this?
View 6 Replies View RelatedI"m having a hard time finding where I turn off the feature that makes the window that my mouse is resting on come to the front. Sometimes when I type I just need to move my mouse out of the way and if it touches another window it makes that other window I have open pop up.And, when I'm using my mouse to navigate on the screen it will make each window come up without clicking on it.
View 3 Replies View Related