When I turn the computer on, at the boot screen I get a "MBR error 3" message before windows boots up. Windows boots fine, but I just want to get rid of that message. I already tried restoring the MBR via the MBR - Restore Windows 7 Master Boot Record.
View 2 Repliesi used to get the BSOD very often so i decided to recover the system to the initial state . i did that and everything was fine , then i updated the windows 7 service pack 1 and finished the installation and rebooted my computer , the start-up at least took half an hour at that time and the service pack 1 installation showed "not successful " i tried to again to update the service pack1 which showed 73.6mb - 892.6mb so i updated it again and again the same thing happened.
View 7 Replies View RelatedI am struggling to fix the error that I get upon startup on my Toshiba Satellite L655 which Reads"RunDLLError in C:Users(my name)AppDataRoamingactxprxy1.dllMissing entry:IgwqI just realized that this isn't referencing actxprxy.dll - it has a "1" stuck in there which is raising a red flag for me and may be why all my google searches come up empty.I have updated windows, which I didn't update currently because I keep it up to date, I have run Microsoft Malicious Software Removal Tool which found nothing, I have run Malwarebytes which found nothing I have of course run my current anti-virus, malware, registry cleaner software and it says all is good too. Nothing is running poorly on my computer but I am starting to think that there was something that happened and my computer was able to remove it but maybe not all of it or there are damaged files from it? I am not super computer saavy but I do pretty well and can definately can follow good directions.
View 9 Replies View RelatedWhen I startup the system (either cold boot or reboot), I get a number of error message boxes. Just have to click them away--no further messages or problems until I restart the computer again. Error messages (in order) follow:
Runtime error 217 at 0040900B
Runtime error 217 at 0018900B
Yes, there are duplicates and they all share "900B"--what might this refer to? I have a brand-new HP Pavilion e9280t 64-bit with 12 gbs of RAM. I do not have Norton Antivirus installed--deleted and replaced with McAfee. Most software programs have been installed to a separate partition--E:Program Files or E:Program Files (x86).
As said before, error messages cause no problems, just curious as to what they refer to.
I'm having a major problem booting up my PC. I keep getting the error message "mbr error 1 Press any key to boot from floppy" every time I reboot my PC. The PC is running Windows 7 Professional 64-bit, and everything was working fine until I started to do some cleaning up in preparation for moving my OS from an existing HDD to a new SSD. My PC has a Gigabyte X58A-UD3r motherboard. I cleaned up my files using Windows System Cleanup and also defragmented the C: drive. All of this seemed to go successfully. On rebooting my PC, and with the SSD installed in an external caddy connected via eSata (because I wanted to clone my existing C: drive across to it to avoid a new installation of Windows 7), I entered BIOS and changed the SATA from IDE to AHCI. (As far as I am aware I didn't change anything else). Then I booted up the PC and got the error suggesting that there was mbr error 1 etc.I turned off the PC and went back into BIOS and reset the SATA back to IDE, and rebooted. Same error. I tried rebooting a number of times - no success.I then put my Windows 7 installation disc into the DVD drive and rebooted from the DVD (after selecting the DVD drive as the boot option in the BIOS startup). It seemed to boot up right into some version of Windows (note: it did not ask me if I wanted to install or repair windows; it just came up with a standard Windows 7 wallpaper and nothing else). I rebooted again, with the Windows 7 disc in the DVD drive, but when it asked me if I wanted to boot from DVD, I just let it run - and it booted up my Windows as normal. But when I tried and reboot without the DVD in the drive and with the HDD boot option as the primary boot, it still gave me the mbr error.
View 5 Replies View RelatedMy computer had a virus in it a while ago and I managed to remove it by deleting a fake win32dll.exe which seemed to be running a .txt document in AppDatalocalTemp.Anyway all seemed fine until I tried to access my control panel when I received an error saying explorer.exe not found. I could not access any keyboard, mouse or sound settings. Again I fixed this by running a 'sfc scannow' in cmd.So to my current problem, sometimes when I start the computer the fan won't turn off and it beeps 6/7 times. Sometimes it starts fine but my graphics drivers don't load properly and i have a small display and my 2nd monitor isn't recognised. I think it has something to do with an error message that pops up everytime on start-up being:There was a problem starting C:Users*me*AppDataLocalTemp1726681.txt The specified module could not be foundTo clarify; My control panel now works and I am virus free but it seems to have left some damage (seems to be with either the .dll files or in the registry). I believe the error message above is affecting my startup and causing the graphics driver problems which resolves itself eventually.
View 7 Replies View RelatedI recently just starting having this problem in which it states that a specified modual cannot be found when i enter onto desptop?. I have no clue where this came from and it is very annoying. I have attached an image at the bottom of what specifically it states.
View 2 Replies View RelatedWhenever I boot up my computer, I get a message that says
"There was a problem starting 3DLCXtime.dll The specified module could not be found"
The box has an 'OK' button and an x in the top right, I just hit 'OK' and the box goes away and doesn't bug me, but I wish to have it stop, since it kinda worries me that it may be a larger problem that may slowly get bigger.
Dell Dimension 8400 o/s W7 Ultimate, running fine for months, has suddenlt started to have an error window pop up on the Desk Top during start up.
View 14 Replies View RelatedI have recently been getting an error stating that \3\DLCQtime.dll could not be loaded because "the specified module could not be found". I am not sure what this file is or how I can fix this error.I am running Windows 7 64 bit on my desktop which is about a year old.Recently I reinstalled my video drivers, removed my sound card, and ran Quicktime repair because of BSOD I was having. I am not sure if any of these could be related, but these seemed to start around the time I removed my sound card This could have been coincidental.Also, I have run Malwarebytes, Spybot, and Windows Security Essentials in an attempt to find any suspicious activity which may be causing this.
View 4 Replies View RelatedI'm having a major problem booting up my PC. I keep getting the error message "mbr error 1 Press any key to boot from floppy" every time I reboot my PC.The PC is running Windows 7 Professional 64-bit, and everything was working fine until I started to do some cleaning up in preparation for moving my OS from an existing HDD to a new SSD. My PC has a Gigabyte X58A-UD3r motherboard.
I cleaned up my files using Windows System Cleanup and also defragmented the C: drive. All of this seemed to go successfully. On rebooting my PC, and with the SSD installed in an external caddy connected via eSata (because I wanted to clone my existing C: drive across to it to avoid a new installation of Windows 7), I entered BIOS and changed the SATA from IDE to AHCI. (As far as I am aware I didn't change anything else). Then I booted up the PC and got the error suggesting that there was mbr error 1 etc.
I turned off the PC and went back into BIOS and reset the SATA back to IDE, and rebooted. Same error. I tried rebooting a number of times - no success.
I then put my Windows 7 installation disc into the DVD drive and rebooted from the DVD (after selecting the DVD drive as the boot option in the BIOS startup). It seemed to boot up right into some version of Windows (note: it did not ask me if I wanted to install or repair windows; it just came up with a standard Windows 7 wallpaper and nothing else). I rebooted again, with the Windows 7 disc in the DVD drive, but when it asked me if I wanted to boot from DVD, I just let it run - and it booted up my Windows as normal. But when I tried and reboot without the DVD in the drive and with the HDD boot option as the primary boot, it still gave me the mbr error.So I booted once again with the Windows DVD, and created a Windows Repair Disc. I rebooted with this and attempted to carry out a MBR repair (using the CMD line: bootrec.exe /fixmbr - which indicated that it ran successfully). I rebooted the PC - still got the mbr error.
I rebooted with the repair disc again and ran: bootrec.exe /fixmbr, and bootrec.exe /fixboot, and bootrec.exe /rebuildbcd. They all seemed to run successfully - but on reboot I still got the mbr error.I also downloaded and rebuilt the MBR using the MBR rebuild utility on Partition Wizard Mini Tool - it still hasn't solved the problem.
I also tried to recover using a previous backup of my C: drive (one created yesterday before I did any clean up or defragmentation, but I am not sure if it had the MBR backed up) - it restored OK, but didn't solve the error.I also ran chkdsk on my C: drive - it suggested that the drive was clean with no errors.
So at the moment the only way I can boot up my PC is to have the Windows 7 installation disc in the DVD drive and have the DVD drive selected as the first boot device (even though I don't subsequently press any button to boot from the DVD) - it just seems to force it to get around the mbr error somehow.
everytime i try to open the halo2 startup.exe application for installation it gives me an error:
"The application was unable to start correctly (0xc0000006).)"
ive tried different computability modes and running it in admin mode isn't working either.
any suggestions?
Everytime I login a popup appears: Quote: There was a problemstarting:C:UsersUserAppDataRoamingMFWMAAECE.dllAccess is denied. I've justuninstalled a program which it might be related to but I haven't had any problems anywhereI've searched for the file in the folder and in start menu and its not coming up with anything.
View 4 Replies View Relateda few days ago when I started my PC, windows went into startup repair, I let it run a few times and about by the fourth retry I realized something was wrong. I restarted my computer and tried again, same thing. I managed to get into system restore by clicking cancel before system repair could start and going into advanced options. I restored my system to an earlier point, but to no avail. I inserted my windows 7 home premium 64bit SP1 OEM disc (built my PC) into my optical drive and went into system repair(on disc). An error message appeared saying how the disc is incompatible with my version of windows. I looked up this on my laptop and managed to fix it by changing the startup order through the BIOS. I tried system repair and system restore through the disc but still no change. After hours of trying to fix this, windows system repair finally admitted it couldn't repair my system and restarted my system. Rather than windows going into system repair I got an error message saying something like 'Driver (I forgot) is not certified,windows driver signing is blocking this from starting'. This lead me to believe that turning off driver signing would allow me to fix this. I searched for a way to turn off windows driver signing or system repair, and have tried many ways through CMD to fix this. I have tried hitting F5 (Asus mobo) to get into the startup options but are only given two options, either run windows(starts system repair) or run memory diagnostics(already run 3 times).I don't have a system image to restore to, and since I'm on my computer every day, moving back my system a month or even week a ago would cause so many problems.
View 1 Replies View RelatedI upgraded from Vista to Win 7 using the HP upgrade disk. About every 2 weeks chkdsk will start at startup. The countdown won't stop and I can't skip it by pressing any key. When it counts down to 1 it freezes and I had to press the power button to restart. Then when it restarts the problem reoccurs.
In the past if I press F8 and choose last known good configuration, the system will normally boot. And then I'll schedule a disk check next time I start the computer and this will normally fix the problem. There won't be any check disk error in 2 weeks.
But this time no matter what I do I can't get it fixed. sfc /scannow didn't find any errors. I ran the system repair by pressing F8 at startup and it said it fixed the startup problems. But the disk check I scheduled at startup still won't run properly. It shows up and then disappears without actually doing anything.
I'm using Avira now but the problem was there when I was using Avast. I don't know what might be causing the problem.
HP laptop-10 days old with an error message from the 3rd day when I start-up the computer reading:
Mom.exe fatal error; CLR error:80004005, "The program will now terminate". I then click the ok button.
I went to the ATI website and downloaded the latest driver for the ATI Mobility Radeon HD 4200 with no luck. Also ran a system file check showing no integrity violations.
Tech support at HP recommends to run the recovery program which will eliminate all the information and programs that I have on the system bringing it to the new condition when I purchased it.
Windows 7 Home; 64 bit. Before I run the recovery program I'm searching for a solution. Also I'm not confident the recovery program will fix the problem.
my laptop is just at a black screen after the dell screen.
I clicked the error checking for the "C Drive" and "At Startup" and when i restarted it just went to a black screen after the dell screen.
I have restarted several times trying to get Windows 7 to startup with no avail. What should i do?
Its a dell latitude laptop with like 2gb of ram intel core 2 duo proc (not sure on speed)
running Windows 7 home premium x64, I'm not sure what I did to cause this issue but it will not go away. Whenever the computer boots up or restarts, this is what I'm greeted with.Solved the issue temporarily, I stopped and item from starting up with CCleaner and its not popping up anymore, I would like to take permanent action.
View 16 Replies View RelatedIf this was answered, I may have overlooked the original question... I recently upgraded to windows 7 and get a startup error with regards to the .net framework 2.0 not being installed, however I have 4 installed. I was told I need to patch in 2.0, how can I do this? When I go to install 2.0 it gives me the same startup error. I can't scan from the lexmark printer but can print anda couple of programs are not functioning properly
View 1 Replies View Relatedwhen i log onto my windows 7 pc this is what I get. I searched the internet for quite a while but I didn't find anything regarding this problem.After I log in, and after my programs load (which are not many) it pops up, saying there was a problem starting "msimts32.dll"
View 1 Replies View RelatedYesterday I started getting this weird error saying: "Runtime error 216 at 0000000000409E35" on startup once everything else has booted up. It happened after I updated my graphics drivers. The morning of the day it first occurred I got a window notifying me of an update and usually I simply update it then and there and nothing goes wrong. However, after that, I turned my PC off and went to play Basketball with a friend for a few hours. When I came back and turned it on, the error message appears. ScreenShot of the error:
SysInfo log:
System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz, Intel64 Family 6 Model 30 Stepping 5
Processor Count: 8
RAM: 8151 Mb
Graphics Card: ATI Radeon HD 5700 Series, 1024 Mb
Hard Drives: C: Total - 942607 MB, Free - 102342 MB;
Motherboard: Dell Inc., 0T568R
Antivirus: AVG Anti-Virus, Updated and Enabled
i am getting an error message at system startup ,there was a problem starting msipkb32.dll.
View 2 Replies View RelatedMy daughter has a Toshiba - Windows 7 - when computer is started in comes up with a Startup Repair loop - everything that you try leads you right back to the startup repair. When you f8 it starts the same way - same startup repair error.
View 1 Replies View RelatedAll followed from the BleepingComputer.com virus removal guide. Well I am now going through my Event Logs under Andministrative. They are saying that I recieve five error logs upon starting up. I am getting a constant *****The previous system shutdown at 12:03:33 AM on 8/13/2012 was unexpected......... Event 6008, Event LogNow I do not remember having ever downloaded AMD Overdrive for the next one*****The AODDriver4.01 service failed to start due to the following error: The system cannot find the path specified.......Event 7000, SCMI Did search for the specified file and it is indeed missing .******The following boot-start or system-start driver(s) failed to load: FileDisk........Event 7026, SCMI am not even sure how to replace service or registry files when they vanish****** Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0xAC8112662AE6. The following error occurred: 0x79.
Your computer will continue to try and obtain an address on its own from the network address (DHCP) server...... Event 1001, DHCP-Client******The HP Network Devices Support service terminated with the following error: The specified module could not be found.....Event 7023, Service Control ManagerI am running Windows 7 64bit Home Premium With AMD PhenomII p650 dual-core processor @ 2.60GHz I remember putting in two upgraded 4 gb memory modules but i guess when i took it to geek squad he did what he wanted and so i have 6.00 GB installed memory running service pack 1.I would love to know if i can pull these system files : services or registry entries from a backup or and system image individually without doing a restore or factory default reset
Each time I start my system, I get an error in the Event Viewer:
The following boot-start or system-start driver(s) failed to load: VDiskBus
I have SLI GTX 580s. Yesterday I was playing a lot of The Secret World and the computer was working fine. I shut down and today when I try to start it up I get a BSOD and the computer reboots. I can start it in safe mode and I get this message:[CODE]I tried both cards by themselves, one of them works fine but the other one gets these errors. I don't know what to do. They were both absolutely fine yesterday, no artifacts show up on screen for the card that isnt working, just when I install Nvidia drivers it all goes to hell.
View 3 Replies View RelatedI have looked into the startup repair loop problem a bit and have tried the advanced repair option but when it prompts me for a login and password, it only gives the option to log in as "updatususer".
View 1 Replies View RelatedEverytime I start up my windows this error message comes up saying NDG.exe had runtime error , then it's followed by another one saying NDG.exe stopped working and need to be close , this really affects my FPS and graphic card performance. I'm using this notebook for school and I can't run some needed programs now.
Graphic card nvidia Geforce GT540M 1GB
I got this horrid message a few days ago, and I cannot find a solution! I've tried all of the "solutions" here: http://support.microsoft.com/kb/927392 with no luck..Before I use a last resort (like reinstalling the OS),
View 2 Replies View RelatedMy Acer 5738 had a problem with Startup error.
View 1 Replies View RelatedYesterday my system had a BSOD when i wasn't home and my wife just restarted the my PC. When i got home about 4 hours later i had another BSOD but did not have time to see what it was. Now my system wont boot into windows. Trying to use start-up repair does nothing since it tells me that the error is that the registry is corrupt but it can't fix it. something like rollback registry failed corrupt registry. So i goggled the issue and tried everything that i could find from the windows 7 forums. used command prompt to search for my drive but i can't find it (windows is in C: drive but it doesn't show up only my external HDD and CD drive shows up. Tried using windows 7 installation CD to repair but it can't save the changes because there is no hard drive with windows operating system installed. Checked my bios yesterday and my internal hdd was still showing up in bios but it was like the 3rd in line to be used for booting. tried restoring from a system image and it wont let me because windows can't find a windows operating system to restore. i unplugged all my cables except for my HDD and tried booting it only to go back into repair start-up screen but i can't do anything there also. Tried doing sfc/scan now but it says a repair is in process and that i need to repair and reset to use that command, same goes for all other commands like bootmgr and so on. My brother in-law says that it may be because i have bad drivers so i updated them with a usb using windows installation load drivers but nothing happens then he said that back in the past there were issues with 6gb sata cables and certain HDD so i pulled out an old 3gbs sata cable and still can't boot. changed ports nothing happens can't even boot to safe mode to scan the drive. umm... can't do a fresh install because windows doesn't see the drive so now.when i turn on my pc my internal HDD is not being shown in the bios could it be that my HDD was dying and now is dead? [code]
View 4 Replies View Related