when i log onto my windows 7 pc this is what I get. I searched the internet for quite a while but I didn't find anything regarding this problem.After I log in, and after my programs load (which are not many) it pops up, saying there was a problem starting "msimts32.dll"
View 1 Repliesi used to get the BSOD very often so i decided to recover the system to the initial state . i did that and everything was fine , then i updated the windows 7 service pack 1 and finished the installation and rebooted my computer , the start-up at least took half an hour at that time and the service pack 1 installation showed "not successful " i tried to again to update the service pack1 which showed 73.6mb - 892.6mb so i updated it again and again the same thing happened.
View 7 Replies View RelatedI am struggling to fix the error that I get upon startup on my Toshiba Satellite L655 which Reads"RunDLLError in C:Users(my name)AppDataRoamingactxprxy1.dllMissing entry:IgwqI just realized that this isn't referencing actxprxy.dll - it has a "1" stuck in there which is raising a red flag for me and may be why all my google searches come up empty.I have updated windows, which I didn't update currently because I keep it up to date, I have run Microsoft Malicious Software Removal Tool which found nothing, I have run Malwarebytes which found nothing I have of course run my current anti-virus, malware, registry cleaner software and it says all is good too. Nothing is running poorly on my computer but I am starting to think that there was something that happened and my computer was able to remove it but maybe not all of it or there are damaged files from it? I am not super computer saavy but I do pretty well and can definately can follow good directions.
View 9 Replies View RelatedI'm having a major problem booting up my PC. I keep getting the error message "mbr error 1 Press any key to boot from floppy" every time I reboot my PC. The PC is running Windows 7 Professional 64-bit, and everything was working fine until I started to do some cleaning up in preparation for moving my OS from an existing HDD to a new SSD. My PC has a Gigabyte X58A-UD3r motherboard. I cleaned up my files using Windows System Cleanup and also defragmented the C: drive. All of this seemed to go successfully. On rebooting my PC, and with the SSD installed in an external caddy connected via eSata (because I wanted to clone my existing C: drive across to it to avoid a new installation of Windows 7), I entered BIOS and changed the SATA from IDE to AHCI. (As far as I am aware I didn't change anything else). Then I booted up the PC and got the error suggesting that there was mbr error 1 etc.I turned off the PC and went back into BIOS and reset the SATA back to IDE, and rebooted. Same error. I tried rebooting a number of times - no success.I then put my Windows 7 installation disc into the DVD drive and rebooted from the DVD (after selecting the DVD drive as the boot option in the BIOS startup). It seemed to boot up right into some version of Windows (note: it did not ask me if I wanted to install or repair windows; it just came up with a standard Windows 7 wallpaper and nothing else). I rebooted again, with the Windows 7 disc in the DVD drive, but when it asked me if I wanted to boot from DVD, I just let it run - and it booted up my Windows as normal. But when I tried and reboot without the DVD in the drive and with the HDD boot option as the primary boot, it still gave me the mbr error.
View 5 Replies View RelatedI'm having a major problem booting up my PC. I keep getting the error message "mbr error 1 Press any key to boot from floppy" every time I reboot my PC.The PC is running Windows 7 Professional 64-bit, and everything was working fine until I started to do some cleaning up in preparation for moving my OS from an existing HDD to a new SSD. My PC has a Gigabyte X58A-UD3r motherboard.
I cleaned up my files using Windows System Cleanup and also defragmented the C: drive. All of this seemed to go successfully. On rebooting my PC, and with the SSD installed in an external caddy connected via eSata (because I wanted to clone my existing C: drive across to it to avoid a new installation of Windows 7), I entered BIOS and changed the SATA from IDE to AHCI. (As far as I am aware I didn't change anything else). Then I booted up the PC and got the error suggesting that there was mbr error 1 etc.
I turned off the PC and went back into BIOS and reset the SATA back to IDE, and rebooted. Same error. I tried rebooting a number of times - no success.
I then put my Windows 7 installation disc into the DVD drive and rebooted from the DVD (after selecting the DVD drive as the boot option in the BIOS startup). It seemed to boot up right into some version of Windows (note: it did not ask me if I wanted to install or repair windows; it just came up with a standard Windows 7 wallpaper and nothing else). I rebooted again, with the Windows 7 disc in the DVD drive, but when it asked me if I wanted to boot from DVD, I just let it run - and it booted up my Windows as normal. But when I tried and reboot without the DVD in the drive and with the HDD boot option as the primary boot, it still gave me the mbr error.So I booted once again with the Windows DVD, and created a Windows Repair Disc. I rebooted with this and attempted to carry out a MBR repair (using the CMD line: bootrec.exe /fixmbr - which indicated that it ran successfully). I rebooted the PC - still got the mbr error.
I rebooted with the repair disc again and ran: bootrec.exe /fixmbr, and bootrec.exe /fixboot, and bootrec.exe /rebuildbcd. They all seemed to run successfully - but on reboot I still got the mbr error.I also downloaded and rebuilt the MBR using the MBR rebuild utility on Partition Wizard Mini Tool - it still hasn't solved the problem.
I also tried to recover using a previous backup of my C: drive (one created yesterday before I did any clean up or defragmentation, but I am not sure if it had the MBR backed up) - it restored OK, but didn't solve the error.I also ran chkdsk on my C: drive - it suggested that the drive was clean with no errors.
So at the moment the only way I can boot up my PC is to have the Windows 7 installation disc in the DVD drive and have the DVD drive selected as the first boot device (even though I don't subsequently press any button to boot from the DVD) - it just seems to force it to get around the mbr error somehow.
Yesterday my system had a BSOD when i wasn't home and my wife just restarted the my PC. When i got home about 4 hours later i had another BSOD but did not have time to see what it was. Now my system wont boot into windows. Trying to use start-up repair does nothing since it tells me that the error is that the registry is corrupt but it can't fix it. something like rollback registry failed corrupt registry. So i goggled the issue and tried everything that i could find from the windows 7 forums. used command prompt to search for my drive but i can't find it (windows is in C: drive but it doesn't show up only my external HDD and CD drive shows up. Tried using windows 7 installation CD to repair but it can't save the changes because there is no hard drive with windows operating system installed. Checked my bios yesterday and my internal hdd was still showing up in bios but it was like the 3rd in line to be used for booting. tried restoring from a system image and it wont let me because windows can't find a windows operating system to restore. i unplugged all my cables except for my HDD and tried booting it only to go back into repair start-up screen but i can't do anything there also. Tried doing sfc/scan now but it says a repair is in process and that i need to repair and reset to use that command, same goes for all other commands like bootmgr and so on. My brother in-law says that it may be because i have bad drivers so i updated them with a usb using windows installation load drivers but nothing happens then he said that back in the past there were issues with 6gb sata cables and certain HDD so i pulled out an old 3gbs sata cable and still can't boot. changed ports nothing happens can't even boot to safe mode to scan the drive. umm... can't do a fresh install because windows doesn't see the drive so now.when i turn on my pc my internal HDD is not being shown in the bios could it be that my HDD was dying and now is dead? [code]
View 4 Replies View RelatedEvery time my system reboots, there will be an error of missing msingv32.dll. (The module cannot be found) There's no big problem with this missing .dll file but it's been bugging me and my system seems to lag at times. I don't know if the missing file affects my system or not.
View 6 Replies View RelatedWhen I start Windows 7 about 30 seconds after the login, I see an error message popping up that says: "Failed to initial environment". In the task bar I see the an icon that writes MFC, which is the program that gives the error message. I looked in my task manager under processes if I see MFC, but there is nothing like this. I am using Windows 7 64 bit.Does anyone have an idea what that would be?Here are 3 screen shots, which show the error and all processes running in my task manager.
View 5 Replies View RelatedI just installed some of the latest Windows updates for my Windows 7 SP1. However, the following balloon notification pops up in the tray upon reboot.
View 4 Replies View RelatedI am not computer savvy when it comes to these sorts of things. The heading states it all and am wanting a bit more of an insight at any problems that may be occurring etc.. Also, as of late I have noticed that my DVD player refuses at times to read a DVD movie or game title, and only after a few open / closes it seems to work. - x86 (32-bit) or x64 ? Windows 7 Home Premium 64 bit - the original installed OS on the system? As Above - an OEM or full retail version? Retail Version
View 3 Replies View Relatedi have sony viao laptop, when i start my pc it shows the following error " operating system not found "when i opened bios menu, it doesnt detectes the hard drive n says " no drive ".hv my hard disk crashed ?
View 1 Replies View RelatedWhen I start Windows 7 about 30 seconds after the login, I see an error message popping up that says: "Failed to initial environment". In the task bar I see the an icon that writes MFC, which is the program that gives the error message. I looked in my task manager under processes if I see MFC, but there is nothing like this. I am using Windows 7 64 bit.
Here are 3 screen shots, which show the error and all processes running in my task manager. [URL]
"Windows cannot find C:Program Files(x86)AMD AVTinkdbsync.exe .Make sure you typed the name correctly and try again".
View 6 Replies View RelatedI just installed some of the latest Windows updates for my Windows 7 SP1. However, the following balloon notification pops up in the tray upon reboot:
View 4 Replies View RelatedWhen I started my pc no D drive. Its not showing up. Only c and dell media direct on the picture
System Dell
Windows 7 OS
Today, my computer was booting up. It was taking a little too long, so i restarted.When i did, right after the loading screen my computer crashed and the BSOD (blue screen of death) error popped up. I cant access safe mode and i have constantly tried to check memory errors, i restored windows, and ran CHKDSK, all leading to the same problem. Here is the error code/ technical information;*** STOP: 0X0000007B 9OXFFFFF880009A97E8, 0XFFFFFFFFC0000034, 0X0000000000000000, 0X0000000000000000)
View 7 Replies View RelatedI've been having an issue with a system error that has given me problems over the past 3 months. As you can see in the attachment, this is what is wee when I either first start up my computer, or I try to print something. Various small differences will show up in the error, such as the weird characters will be in different order etc. When I try first start up my machine and this error pops up, I only have to click okay once for the message to disappear. However, when I try to print, I must click "OK" at least 20 times before the message stops popping up. Its getting annoying and I'm afraid that it will eventually get worse. I've always troubleshooted my own problems, however I'm not even sure where to start as I cant understand the characters or what program could be causing this.
View 4 Replies View Relatedi have an acer aspire 5315 laptop it wont do anything. i go on start up repair and it says it cant fix automatically, each time i turn the laptop on its the same.
View 2 Replies View Relatedafter turning on my laptop that have win 7 something happened <after the win 7 logo and the moving 4 colours of the start up a blue screened error appears say "a problem has been detected and windows has been shut down to prevent damage to your computer and at the bottom of the message Technical information *** STOP: 0x0000007B(0x80786A50,0XC0000034,0X00000000,0X00000000)" > and i tried to install a new windows drive C doesn't appear and the other drive is not a NTFS so i couldnt install a new windows even turning on the existing windows to take my files
View 4 Replies View RelatedWhen I turn the computer on, at the boot screen I get a "MBR error 3" message before windows boots up. Windows boots fine, but I just want to get rid of that message. I already tried restoring the MBR via the MBR - Restore Windows 7 Master Boot Record.
View 2 Replies View RelatedWhen I startup the system (either cold boot or reboot), I get a number of error message boxes. Just have to click them away--no further messages or problems until I restart the computer again. Error messages (in order) follow:
Runtime error 217 at 0040900B
Runtime error 217 at 0018900B
Yes, there are duplicates and they all share "900B"--what might this refer to? I have a brand-new HP Pavilion e9280t 64-bit with 12 gbs of RAM. I do not have Norton Antivirus installed--deleted and replaced with McAfee. Most software programs have been installed to a separate partition--E:Program Files or E:Program Files (x86).
As said before, error messages cause no problems, just curious as to what they refer to.
My computer had a virus in it a while ago and I managed to remove it by deleting a fake win32dll.exe which seemed to be running a .txt document in AppDatalocalTemp.Anyway all seemed fine until I tried to access my control panel when I received an error saying explorer.exe not found. I could not access any keyboard, mouse or sound settings. Again I fixed this by running a 'sfc scannow' in cmd.So to my current problem, sometimes when I start the computer the fan won't turn off and it beeps 6/7 times. Sometimes it starts fine but my graphics drivers don't load properly and i have a small display and my 2nd monitor isn't recognised. I think it has something to do with an error message that pops up everytime on start-up being:There was a problem starting C:Users*me*AppDataLocalTemp1726681.txt The specified module could not be foundTo clarify; My control panel now works and I am virus free but it seems to have left some damage (seems to be with either the .dll files or in the registry). I believe the error message above is affecting my startup and causing the graphics driver problems which resolves itself eventually.
View 7 Replies View RelatedI recently just starting having this problem in which it states that a specified modual cannot be found when i enter onto desptop?. I have no clue where this came from and it is very annoying. I have attached an image at the bottom of what specifically it states.
View 2 Replies View RelatedWhenever I boot up my computer, I get a message that says
"There was a problem starting 3DLCXtime.dll The specified module could not be found"
The box has an 'OK' button and an x in the top right, I just hit 'OK' and the box goes away and doesn't bug me, but I wish to have it stop, since it kinda worries me that it may be a larger problem that may slowly get bigger.
Dell Dimension 8400 o/s W7 Ultimate, running fine for months, has suddenlt started to have an error window pop up on the Desk Top during start up.
View 14 Replies View RelatedI have recently been getting an error stating that \3\DLCQtime.dll could not be loaded because "the specified module could not be found". I am not sure what this file is or how I can fix this error.I am running Windows 7 64 bit on my desktop which is about a year old.Recently I reinstalled my video drivers, removed my sound card, and ran Quicktime repair because of BSOD I was having. I am not sure if any of these could be related, but these seemed to start around the time I removed my sound card This could have been coincidental.Also, I have run Malwarebytes, Spybot, and Windows Security Essentials in an attempt to find any suspicious activity which may be causing this.
View 4 Replies View Relatedeverytime i try to open the halo2 startup.exe application for installation it gives me an error:
"The application was unable to start correctly (0xc0000006).)"
ive tried different computability modes and running it in admin mode isn't working either.
any suggestions?
Everytime I login a popup appears: Quote: There was a problemstarting:C:UsersUserAppDataRoamingMFWMAAECE.dllAccess is denied. I've justuninstalled a program which it might be related to but I haven't had any problems anywhereI've searched for the file in the folder and in start menu and its not coming up with anything.
View 4 Replies View Relateda few days ago when I started my PC, windows went into startup repair, I let it run a few times and about by the fourth retry I realized something was wrong. I restarted my computer and tried again, same thing. I managed to get into system restore by clicking cancel before system repair could start and going into advanced options. I restored my system to an earlier point, but to no avail. I inserted my windows 7 home premium 64bit SP1 OEM disc (built my PC) into my optical drive and went into system repair(on disc). An error message appeared saying how the disc is incompatible with my version of windows. I looked up this on my laptop and managed to fix it by changing the startup order through the BIOS. I tried system repair and system restore through the disc but still no change. After hours of trying to fix this, windows system repair finally admitted it couldn't repair my system and restarted my system. Rather than windows going into system repair I got an error message saying something like 'Driver (I forgot) is not certified,windows driver signing is blocking this from starting'. This lead me to believe that turning off driver signing would allow me to fix this. I searched for a way to turn off windows driver signing or system repair, and have tried many ways through CMD to fix this. I have tried hitting F5 (Asus mobo) to get into the startup options but are only given two options, either run windows(starts system repair) or run memory diagnostics(already run 3 times).I don't have a system image to restore to, and since I'm on my computer every day, moving back my system a month or even week a ago would cause so many problems.
View 1 Replies View RelatedI upgraded from Vista to Win 7 using the HP upgrade disk. About every 2 weeks chkdsk will start at startup. The countdown won't stop and I can't skip it by pressing any key. When it counts down to 1 it freezes and I had to press the power button to restart. Then when it restarts the problem reoccurs.
In the past if I press F8 and choose last known good configuration, the system will normally boot. And then I'll schedule a disk check next time I start the computer and this will normally fix the problem. There won't be any check disk error in 2 weeks.
But this time no matter what I do I can't get it fixed. sfc /scannow didn't find any errors. I ran the system repair by pressing F8 at startup and it said it fixed the startup problems. But the disk check I scheduled at startup still won't run properly. It shows up and then disappears without actually doing anything.
I'm using Avira now but the problem was there when I was using Avast. I don't know what might be causing the problem.
HP laptop-10 days old with an error message from the 3rd day when I start-up the computer reading:
Mom.exe fatal error; CLR error:80004005, "The program will now terminate". I then click the ok button.
I went to the ATI website and downloaded the latest driver for the ATI Mobility Radeon HD 4200 with no luck. Also ran a system file check showing no integrity violations.
Tech support at HP recommends to run the recovery program which will eliminate all the information and programs that I have on the system bringing it to the new condition when I purchased it.
Windows 7 Home; 64 bit. Before I run the recovery program I'm searching for a solution. Also I'm not confident the recovery program will fix the problem.