Every time my system reboots, there will be an error of missing msingv32.dll. (The module cannot be found) There's no big problem with this missing .dll file but it's been bugging me and my system seems to lag at times. I don't know if the missing file affects my system or not.
View 6 RepliesYesterday my system had a BSOD when i wasn't home and my wife just restarted the my PC. When i got home about 4 hours later i had another BSOD but did not have time to see what it was. Now my system wont boot into windows. Trying to use start-up repair does nothing since it tells me that the error is that the registry is corrupt but it can't fix it. something like rollback registry failed corrupt registry. So i goggled the issue and tried everything that i could find from the windows 7 forums. used command prompt to search for my drive but i can't find it (windows is in C: drive but it doesn't show up only my external HDD and CD drive shows up. Tried using windows 7 installation CD to repair but it can't save the changes because there is no hard drive with windows operating system installed. Checked my bios yesterday and my internal hdd was still showing up in bios but it was like the 3rd in line to be used for booting. tried restoring from a system image and it wont let me because windows can't find a windows operating system to restore. i unplugged all my cables except for my HDD and tried booting it only to go back into repair start-up screen but i can't do anything there also. Tried doing sfc/scan now but it says a repair is in process and that i need to repair and reset to use that command, same goes for all other commands like bootmgr and so on. My brother in-law says that it may be because i have bad drivers so i updated them with a usb using windows installation load drivers but nothing happens then he said that back in the past there were issues with 6gb sata cables and certain HDD so i pulled out an old 3gbs sata cable and still can't boot. changed ports nothing happens can't even boot to safe mode to scan the drive. umm... can't do a fresh install because windows doesn't see the drive so now.when i turn on my pc my internal HDD is not being shown in the bios could it be that my HDD was dying and now is dead? [code]
View 4 Replies View RelatedI got this horrid message a few days ago, and I cannot find a solution! I've tried all of the "solutions" here: http://support.microsoft.com/kb/927392 with no luck..Before I use a last resort (like reinstalling the OS),
View 2 Replies View Relatedi used to get the BSOD very often so i decided to recover the system to the initial state . i did that and everything was fine , then i updated the windows 7 service pack 1 and finished the installation and rebooted my computer , the start-up at least took half an hour at that time and the service pack 1 installation showed "not successful " i tried to again to update the service pack1 which showed 73.6mb - 892.6mb so i updated it again and again the same thing happened.
View 7 Replies View RelatedI've also tried the command prompt trick on here to no avail either. Strangely, whenever the Windows CD is in my CD-ROM, it starts up fine and works. However, I will go to work and come back after having left it on and it will be back to the BOOTMGR is missing screen inevitably by the time I get back, so I don't know long it stays working with the windows 7 CD in. Would a clean re-install of windows 7 do it? I would prefer not to but it isn't out of the question. I am something of a computer novice, but as best as I can tell, I have a Corsair SSD with windows installed on it, and a separate regular old HDD from Seagate for storage of media.
View 7 Replies View RelatedSo I recently upgraded from windows xp to windows7, I went about installing well the wrong way. I Installed windows 7 from the downloaded file onto a empty hard drive I had attached to my computer. I did this all while xp was still running. Anyway it worked and windows 7 always booted up and worked just fine. But NOW!! I removed the attached hard drive where xp was installed and I try to use win 7 but it says NTLDR is missing at startup
View 7 Replies View RelatedLaptop configuration:
Windows 7 64 bit Professional
Linux 11.04 (dual boot)
i7, 2Gb RAM.
The computer has been running fine for the last year. I am giving the series of events below:(Please note that linux is still running fine, so this cant be a hardware problem)##Today, when I started my laptop, it failed to start. It showed no error, its just that after the windows logo comes, it froze in a black screen with mouse cursor visible.###I forced restart, and then it gave me the option to repair, because windows was unable to start. ###I chose repair, and the repair program started "detecting problems". Then it gave me the option to either do a system restore or cancel. I chose system restore. ###I let it run for 3 hrs., but it seemed to make no progress, so I forced restart. (It didnt let me cancel also, said that current recovery process cannot be canceled)###I tried to enter safe mode this time, and was successful. I went to system restore, where it showed me an option to restore to an older point where I hadnt uninstalled a game (Assassin's creed Revelations)### For some reason, I didnt restore the system. I thought that maybe all this was a temporary problem. So I restarted normally, and tried starting windows the normal way. It failed. After the windows logo comes, there is a black screen with mouse pointer for a few seconds, then it automatically restarts. (this is what happened then, and also happens now)### I tried entering safe mode, but failed. Same thing started happening in safe mode also. Even though I opened safe mode successfully just a while ago.### I tried many times to start windows in safe mode and all its variants, but to no avail.### I tried many times with the startup repair option, but also to no avail. It always seemed that it would go on forever.
I dont have the windows 7 installation Cd or even the recovery CD. (how bad is that?). So I borrowed a recovery CD from a friend, who also has windows 7 64 bit, and booted from it. It said that the driver windows/system32/driver/isapnp.sys was missing or corrupt. It says that I need the installation CD and select repair. But I dont have the installation CD from which my windows was installed. I have two questions:
1. If I somehow ask around and get someone else's windows 7 64 bit installation disk, will it work? (Someone else's disk, from which my windows was not installed). I dont need to put in the key or something, do I? I dont even know the key. The laptop came with windows installed and everything.
2. Can I simply replace the file isapnp.sys in windows/system32/drivers folder through linux? I asked my friend to give me his isapnp.sys file (which was of the same size as mine, he also ran win7 64 bit). Replaced it, but it doesnt work. Is there some other place I should replace it too, or this method is not supposed to work?
I reinstalled windows 7 and now there isnt a startup folder..
View 1 Replies View RelatedLately at seemingly random times, all of the toolbars except for the language bar are missing when I startup Windows. The only way for me to get them back is to re-activate them again through the menu.
Why does this happen and how can I keep them from being unselected from the taskbar?
I just recently performed a clean install from Vista 64bit to Windows 7. I have two internal drives Local (C: ) and (F: ). I made sure I installed Windows 7 on my local (C: ). Everything installed fine and I got Windows 7 to work.
The problem is when I restart my computer, I get the "Bootmgr is missing". I am only able to get to my desktop if I have my DVD set to top boot device in my BIOS, AND if I have the Windows 7 dvd in it.
I searched everywhere for a solution and it seems like the way to fix this is to boot from Windows 7 and do a startup repair. I did this, but I am still getting the exact same problem.
When I am on the system recovery window , I noticed it shows my (D: ) drive (even though it is set to (C: ) but it shows the same size of my (C: ) drive.
How Do I fix this?
I have an Macbook Pro with an Intel processor, which I have partitioned as a dual boot and have Windows 7 Ultimate X64 installed. This setup has ran fine until last week. I installed an old Guitar DVD course, and the default video player was Windows Media Player. For some reason the videos would only play sound but no video. The videos would play fine if I went to the folders and used a different media player, but within the lessons software it by default used Windows Media player. I tried updating all the codecs to play avi files but with no luck. I read where it was a known issue with WMP 12, and rolling back to WMP11 usually solved the issue. I found an older version of WMP 11, but I think it was infected with malware, and I was caught in an infinite boot loop where Windows wouldfind a problem, try to repair it, and couldn't, and reboot only to keep doing that over and over. I ran /fixmbr and /fixboot and managed to get out of the boot loop, but now I keep getting an error "Windows is unable to start due to a missing or corrupt file WindowsSysWOW64DriversSZKG64.sys From researching some it seems to be a driver from an antivirusspyware program I have installed called StopZilla. I've looked everywhere for some way to get past this but can't seem to find a solution. Also I have ran three different rescue cd's and nothing has shown up.
View 6 Replies View RelatedI want to switch my graphic (I have dual graphic one is intel and one is ATI mobility Radeon), I click okay to switch to power saving graphic intel, and so the screen blacks out. It never respond after black out, I made hard restart and screen freeze at the win 7 icon. No lucky, I hard press again and start up to ask me if I want to scan for my previous startup problem, I did and it tried fixing the problem til next morning. No luck, give me a choice of to do a HP recovery or system recovery, some how I must have accidentally click on HP recovery and preceded to click through all the warnings, til it was at 1% then I realized that it was going to delete all my DATA!Well, I was still very sleepy when I decided to terminate that recovery...by power shut down.So power up: "BOOTMGR is Missing Press Crtl-Alt-Del to restart"I went through F11 system recovery to try and see if I can still recover, but no luck, later i tried some steps in cmd window:
bootrec/fixmbr
bootrec/fixboot
bootrec/rebuildbcd
bootrec/scanos
got error says I have zero OS installed!
Bcdboot c:windows also give me failure when attempting to copy boot files I restarted, try and try again, but now it won't even let me into system recovery says "BOOTMGR is missing" now I can't even access my command to try some recovery without totally deleting my files.... I tried burning a win7 ultimate iso to a DVD and try boot from there but it says no OS system found.My computer is HP touchsmart with switchable graphic, HP has a recovery partition that can restore my computer but I don't know how to access it now. Can't get pass the screen of BOOTMGR is missing...I learn my lesson don't touch computer til im fully sober. I may have done the DVD bootable wrong. And now I NEED EXPERT HELP! MY NOVICE SKILL HAS TAKEN ME NO WHERE, PLEASE EXPERTS REPLY WITH INSTRUCTIONS..........
My original system is win 7 home premium 64x, but all I have at my disposal is a copy of win 7 ultimate 64x.Some specs of my computer: HP touchsmart with switchable graphic, intel i5 and ATI mobility Only has one OS: Windows 7 Home premium 64x Has HP recovery partition, and 300GB of other space.have this InsydeH20 Setup Utility Rev. 3.5 and currently all I can do is do some random scans.. Primary hard disk self test, and then memory test, I don't expect to see any problems since I have this done with in the HP system recovery environment.
I am struggling to fix the error that I get upon startup on my Toshiba Satellite L655 which Reads"RunDLLError in C:Users(my name)AppDataRoamingactxprxy1.dllMissing entry:IgwqI just realized that this isn't referencing actxprxy.dll - it has a "1" stuck in there which is raising a red flag for me and may be why all my google searches come up empty.I have updated windows, which I didn't update currently because I keep it up to date, I have run Microsoft Malicious Software Removal Tool which found nothing, I have run Malwarebytes which found nothing I have of course run my current anti-virus, malware, registry cleaner software and it says all is good too. Nothing is running poorly on my computer but I am starting to think that there was something that happened and my computer was able to remove it but maybe not all of it or there are damaged files from it? I am not super computer saavy but I do pretty well and can definately can follow good directions.
View 9 Replies View RelatedI have already reported to Sony to but i heard their take their time but thats the one thing what i dont have at the moment so i know many people here know about that stuff to. So anyway. Some time ago SP1 launched for Windows 7. I installed but it but something went it wrong and it didn't install correcly and then i was forced to use System restore. Everything worked and i haven't used SP1 because i don't want to risk screwing up my computer before some important things, i got plenty of time later for that . The problem is after the system restore every time Vegas launches i get a error : Sony Vegas pro 10 an error occurred starting Vegas Pro Error 0x80070002 (message missing).
View 1 Replies View RelatedI started the StartUp Repair again and it has this error: Code: Root cause found:
Boot manager is missing or corrupt.
Repair action: File repair.
Result: Failed. Error code = 0x15
time taken = 0 ms
What does this mean?
I'm having a major problem booting up my PC. I keep getting the error message "mbr error 1 Press any key to boot from floppy" every time I reboot my PC. The PC is running Windows 7 Professional 64-bit, and everything was working fine until I started to do some cleaning up in preparation for moving my OS from an existing HDD to a new SSD. My PC has a Gigabyte X58A-UD3r motherboard. I cleaned up my files using Windows System Cleanup and also defragmented the C: drive. All of this seemed to go successfully. On rebooting my PC, and with the SSD installed in an external caddy connected via eSata (because I wanted to clone my existing C: drive across to it to avoid a new installation of Windows 7), I entered BIOS and changed the SATA from IDE to AHCI. (As far as I am aware I didn't change anything else). Then I booted up the PC and got the error suggesting that there was mbr error 1 etc.I turned off the PC and went back into BIOS and reset the SATA back to IDE, and rebooted. Same error. I tried rebooting a number of times - no success.I then put my Windows 7 installation disc into the DVD drive and rebooted from the DVD (after selecting the DVD drive as the boot option in the BIOS startup). It seemed to boot up right into some version of Windows (note: it did not ask me if I wanted to install or repair windows; it just came up with a standard Windows 7 wallpaper and nothing else). I rebooted again, with the Windows 7 disc in the DVD drive, but when it asked me if I wanted to boot from DVD, I just let it run - and it booted up my Windows as normal. But when I tried and reboot without the DVD in the drive and with the HDD boot option as the primary boot, it still gave me the mbr error.
View 5 Replies View RelatedI'm having a major problem booting up my PC. I keep getting the error message "mbr error 1 Press any key to boot from floppy" every time I reboot my PC.The PC is running Windows 7 Professional 64-bit, and everything was working fine until I started to do some cleaning up in preparation for moving my OS from an existing HDD to a new SSD. My PC has a Gigabyte X58A-UD3r motherboard.
I cleaned up my files using Windows System Cleanup and also defragmented the C: drive. All of this seemed to go successfully. On rebooting my PC, and with the SSD installed in an external caddy connected via eSata (because I wanted to clone my existing C: drive across to it to avoid a new installation of Windows 7), I entered BIOS and changed the SATA from IDE to AHCI. (As far as I am aware I didn't change anything else). Then I booted up the PC and got the error suggesting that there was mbr error 1 etc.
I turned off the PC and went back into BIOS and reset the SATA back to IDE, and rebooted. Same error. I tried rebooting a number of times - no success.
I then put my Windows 7 installation disc into the DVD drive and rebooted from the DVD (after selecting the DVD drive as the boot option in the BIOS startup). It seemed to boot up right into some version of Windows (note: it did not ask me if I wanted to install or repair windows; it just came up with a standard Windows 7 wallpaper and nothing else). I rebooted again, with the Windows 7 disc in the DVD drive, but when it asked me if I wanted to boot from DVD, I just let it run - and it booted up my Windows as normal. But when I tried and reboot without the DVD in the drive and with the HDD boot option as the primary boot, it still gave me the mbr error.So I booted once again with the Windows DVD, and created a Windows Repair Disc. I rebooted with this and attempted to carry out a MBR repair (using the CMD line: bootrec.exe /fixmbr - which indicated that it ran successfully). I rebooted the PC - still got the mbr error.
I rebooted with the repair disc again and ran: bootrec.exe /fixmbr, and bootrec.exe /fixboot, and bootrec.exe /rebuildbcd. They all seemed to run successfully - but on reboot I still got the mbr error.I also downloaded and rebuilt the MBR using the MBR rebuild utility on Partition Wizard Mini Tool - it still hasn't solved the problem.
I also tried to recover using a previous backup of my C: drive (one created yesterday before I did any clean up or defragmentation, but I am not sure if it had the MBR backed up) - it restored OK, but didn't solve the error.I also ran chkdsk on my C: drive - it suggested that the drive was clean with no errors.
So at the moment the only way I can boot up my PC is to have the Windows 7 installation disc in the DVD drive and have the DVD drive selected as the first boot device (even though I don't subsequently press any button to boot from the DVD) - it just seems to force it to get around the mbr error somehow.
Earlier yesterday I was having an issue where sound was both playing through my laptop's speakers as well as the headphones I had plugged in. Not really knowing an exact way to fix this I went to the device and disabled it hoping that could temporarily solve my problem. Now, I am assuming because of this whenever I boot into Windows 7 I get to the "please wait" screen then instantly get a blue screen every time and I can only boot into safe mode. I found this thread (one or more audio service isnt running) through Google and found that this user had the same issues I was having (I am also getting the audio service error when I run the troubleshooterI believer my speakers are Realtek and when I run dxdiag I get the hardware ID of DAUDIOFUNC_01&VEN_10EC&DEV_0272&SUBSYS_1025028D&REV_1000 (I ran this dxdiag in the copy of the Windows 8 dev preview I have also installed to my hard drive)I do have the results from Windows_NT6_BSOD_jcgriff2 attached but when I ran perfmon /report I got: "An error occurred while attempting to generate the report.The system cannot find the path specified."My copy of Windows 7 Home Premium 64 bit came pre-installed on my machine which I got either 2 or 3 years ago, don't remember exactly
View 4 Replies View Relatedwhen i startup my computer it shows BOOTMGR missing, press alt ctrl del to restart. i dont have any cd/dvd?
View 1 Replies View Relatedwhen i log onto my windows 7 pc this is what I get. I searched the internet for quite a while but I didn't find anything regarding this problem.After I log in, and after my programs load (which are not many) it pops up, saying there was a problem starting "msimts32.dll"
View 1 Replies View RelatedMissing file error on 7
View 2 Replies View RelatedMy computer recently began to give me bsod and would not detect external devices, i.e. external hard drives, wireless adapters, and other usb devices. The issue windows gave me as the cause was that these devices did not have digital signatures. After online research and a trip to the geek squad, I determined that all of my hardware was in perfect working order. I tried to remove and re-install my copy of windows 7 64 bit ultimate but found that my disk was, despite being unscathed, unreadable and unusable.
I found several articles about creating a bootable USB drive with an ISO of the disk. I have the ISO on my laptop and have been trying to get my USB to operate on the desktop, which due to blue screens and automatic restarts gave me no recourse but to wipe it completely. As I stand now I have partitioned the USB drive as fat32 after doing a cmd prompt cleaning and have loaded the iso on using several different programs including the official Microsoft USB creator. All but one have produced the same error saying "error loading operating system" when booting from just the USB. The only program to produce a different result was YUMI which loaded a program that launches on start up and gives me the option to use the Windows 7 ISO but then produces another error saying "Error 27: Unrecognized Command"
Have I missed something in the formatting process or does the fact that the Windows USB creator re formats the USB as NTFS before every ISO upload mean that I cannot load my copy of Windows 7 this way?
When I start Windows 7 about 30 seconds after the login, I see an error message popping up that says: "Failed to initial environment". In the task bar I see the an icon that writes MFC, which is the program that gives the error message. I looked in my task manager under processes if I see MFC, but there is nothing like this. I am using Windows 7 64 bit.Does anyone have an idea what that would be?Here are 3 screen shots, which show the error and all processes running in my task manager.
View 5 Replies View RelatedI just installed some of the latest Windows updates for my Windows 7 SP1. However, the following balloon notification pops up in the tray upon reboot.
View 4 Replies View RelatedI am not computer savvy when it comes to these sorts of things. The heading states it all and am wanting a bit more of an insight at any problems that may be occurring etc.. Also, as of late I have noticed that my DVD player refuses at times to read a DVD movie or game title, and only after a few open / closes it seems to work. - x86 (32-bit) or x64 ? Windows 7 Home Premium 64 bit - the original installed OS on the system? As Above - an OEM or full retail version? Retail Version
View 3 Replies View Relatedi have sony viao laptop, when i start my pc it shows the following error " operating system not found "when i opened bios menu, it doesnt detectes the hard drive n says " no drive ".hv my hard disk crashed ?
View 1 Replies View RelatedWhen I start Windows 7 about 30 seconds after the login, I see an error message popping up that says: "Failed to initial environment". In the task bar I see the an icon that writes MFC, which is the program that gives the error message. I looked in my task manager under processes if I see MFC, but there is nothing like this. I am using Windows 7 64 bit.
Here are 3 screen shots, which show the error and all processes running in my task manager. [URL]
"Windows cannot find C:Program Files(x86)AMD AVTinkdbsync.exe .Make sure you typed the name correctly and try again".
View 6 Replies View RelatedI just installed some of the latest Windows updates for my Windows 7 SP1. However, the following balloon notification pops up in the tray upon reboot:
View 4 Replies View RelatedWhen I started my pc no D drive. Its not showing up. Only c and dell media direct on the picture
System Dell
Windows 7 OS
Today, my computer was booting up. It was taking a little too long, so i restarted.When i did, right after the loading screen my computer crashed and the BSOD (blue screen of death) error popped up. I cant access safe mode and i have constantly tried to check memory errors, i restored windows, and ran CHKDSK, all leading to the same problem. Here is the error code/ technical information;*** STOP: 0X0000007B 9OXFFFFF880009A97E8, 0XFFFFFFFFC0000034, 0X0000000000000000, 0X0000000000000000)
View 7 Replies View Related