Loses IP After Lengthy Sleep
Apr 7, 2011
My netbook loses its IP address after it has been asleep overnight or longer. I cannot do an ipconfig /release or ipconfig /renew. It says there is no media. My only recourse is to restart. My laptop does not have this problem.
View 7 Replies
ADVERTISEMENT
Feb 10, 2011
Whatever modem/router I use (except my old 2Wire that died in Dec. 2010), I lose connectivity after I resume/wakeup. The tray icon says "connected", but my browser (Firefox) or my email client (Thunderbird) say "no"!
View 3 Replies
View Related
May 2, 2012
Dell Inspiron 1545.
Windows 7 Home Premium, Service Pack 1
Pentium Dual-Core CPU T4200 @ 2.00GHz
4.00 GB
64-bit Operating System
This error keeps coming up and keeps making startup time very lengthy or not at all.
Log Name: Microsoft-Windows-Diagnostics-Performance/Operational
Source: Microsoft-Windows-Diagnostics-Performance
Date: 30/04/2012 21:11:10
Event ID: 351
Task Category: Standby Performance Monitoring
Level: Error
[Event Log] .......
I tried editing the register and I tried updating my drivers (no yellow triangles) but nothing has worked?
View 5 Replies
View Related
Sep 15, 2011
I am rebooting "Windows 7" more than any prior version of Windows for one simple reason. When my computer comes out of a sleep mode and I click to log on to an existing session, the keyboard can no longer be used. Often when I attempt to type on the keyboard, the mouse is then lost as well.
If I instead log on and then immediately do a restart - everything is fine. So, now I have fallen into the habit of restarting every time. It takes less time for me to do that then getting something started with the mouse and then freezing the system by trying to type something. So I just accept the restart and avoid the reboot. But, essentially the restart is a reboot.
Very frustrating! Then a few times I have gone directly to the Microsoft website and they do not even mention the issue in their database. It's like no matter how many people mention the same "windows 7" "loses keyboard", Microsoft just does not care. It goes against all the other facts that say "Windows 7" is the most stable version of Windows.
View 1 Replies
View Related
Jan 4, 2010
1. Computer, at start up, sometimes can't find my monitor. Only way is to start the computer with the monitor switched off; then turn the monitor on at a certain time during the booting process (when I here a motherboard-beep). Occasionally the connection will be broken anyway (and I'll have to mess with the 'reset/-start button). I generally get to the motherboard page and BIOS settings. But sometimes not even that and then the only solution is to leave everything off for a while (minimum a couple of minuts – but not exactly sure).
2. Computer lose monitor when it to goes into sleep mode. This only happens if I leave it inactive for a long enough time. I can usually retrieve it if the display's gone out only for a short while, as usual - by pressing keyboard or moving mouse.
My hope is to find a solution that doesn't involve buying a new monitor.
View 4 Replies
View Related
Oct 22, 2011
Got a PC with Nvidia GeForce 6150 graphics card with no overclocking. Sometimes the monitor loses signal and does not work. Sometimes it works just fine. I've tried different VGA cable and different monitor, situation didn't change. I've got 4 different connectors.
- 1 VGA and DVI on Nvidia
- 1 VGA and DVI built in into motherboard.
Sometimes, when the Nvidia doesn't work, I connect to built-in card and monitor starts working. Next time when it's out, I connect back to Nvidia. There have been situations when only one of the four connectors is working. This means that on one graphics card there may be only one connector which is functioning. I don't get this. Problem isn't in the display nor the cable. It also doesn't seem to be in the graphics card as the built-in connectors aren't fully functional neither.
View 5 Replies
View Related
Jun 13, 2012
i just nstalled windows 7 64 bit ultimate on a custom build. i have video at the start then with the windows circle spinning the video just goes to black. the system works good in safemode.
View 3 Replies
View Related
Aug 8, 2011
I have a new Dell laptop running W7. The screen tint is far too blue and I have found the controls in the display section where I can modify the colours (and gamma etc).
I can adjust everything with no problems, but much to my annoyance, when I boot up again, all the settings have reverted back to the factory, too blue settings.
(I think that the settings even get lost if the laptop powers itself down through the various hibernate/sleeps etc; although I'm not that familiar with all of those options so am not sure.)
So, my question is how can I get W7 to remember these settings?
View 2 Replies
View Related
Sep 7, 2011
All of a sudden Snipping Tool is losing anything I try to save in jpeg format. It says it saves in the folder where I asked it to but nothing is there. When I redo the snip it tells me that file already exist. When I do a search the file shows up as being in as a Recent file used but nowhere else.
View 2 Replies
View Related
Aug 10, 2009
I turn on the computer, goes past the bios screen as normal, does the windows loading screen as normal, then the screen goes black and the "No Signal" message is displayed.
Now, here is why it is different. I type in my password and press enter, without being able to see and wait for the logon sound to play, then if I unplug monitors cable, I hear the noise of windows telling me a device has been disconnected, I plug it back in again the device connection noise then plays and low and behold, there is the desktop.
I have been running Windows 7 build 7100 for roughly about three weeks until this started happening about one week ago.
MONITOR: ViewSonic VX1932wm
GPU: Sapphire HD4850 512mb
Also, I have noticed too after logging, randomly Aero will disable itself, I have to open the 'Personalize' option and run the troubleshoot to get it to fix itself again.
I assume this is the correct section, as I am experiencing visual issues. Apologies if this is not the correct section.
View 2 Replies
View Related
Sep 25, 2012
When I start my computer with drivers installed my monitor loses the signal when I should be receiving a log in screen. I can boot up fine in safemode and/or if I'm using Standard VGA Graphics Adapter. To my knowledge I do not have an onboard graphics card as there is nothing to plug an avi or vga cord into aside from my graphics card. I should also mention I tried using an NVIDIA GeForce 8500 GT and experienced the same problem.
View 5 Replies
View Related
May 26, 2009
I am noticing that if the OS is unexpectedly shut down then all the state data in IE is lost. I am assuming it is cookie data. An example is Google preferences. I set it to display 100 results per page, not filter my results and open in a new window.
Every time the computer is "accidently" powered off upon reboot Google reverts to showing 10 results per page, filtered results and opening in the same page (the default settings). This goes for every site that I have remember my login name.
I am runing Windows 7 Build 7100 RC1
I am curious if anyone else is experiencing this issue.
View 5 Replies
View Related
Jun 29, 2011
Its been like this for a while now. That is every time i leave my computer on for over a day it loses its ability to load webpages. A simple ping to [URL] gives a timeout while any other computer on the network can still access any other website (including google.com). I suspected a failure of my computers DNS to convert DN's into IPs however a flushing and reactivating of the computers DNS cache still does not solve the issue. If i still have MSN or uTorrent running they seem to be able to connect to peers over the internet which is strangely odd, however signing in and refreshing trackers no longer work. I have tried accessing websites with the latest version of IE and FF while this problem persists.
All network settings are on automatic and i use Windows 7 SP1. I have a phone that alerts me to new mail and i have suscribed to this thread.
View 9 Replies
View Related
Feb 21, 2012
Fujitsu M1450G is losing its internet connection after a few minutes of internet browsing, the wireless connection says it is still connected, but internet doesnt work. I also do a repair on the connection but it doesn't solve the problem. I have to restart the laptop each time to have internet again, and it will only last a few minutes usually. What can the problem be and how can I solve it?PS Laptop location doesn't seem to be the issue, tried it just a metre away from the router and it has the same problem. Other laptops in the house have no problem at all.
View 9 Replies
View Related
Jun 1, 2012
i just recently built a new gaming rig and am running an SSD for boot up.
Everything turns out just fine except when after the windows logo appears, I can hear a little crackle noise from my headphone then the monitor loses signal and my g15 keyboard LCD turns off, then a few moments later my monitor and keyboard comes back to normal and i am a the login screen. It is not a big deal but am just puzzled at why it would do this.
It does slow down my boot speed by a lot especially for an SSD. Anyone know how i can speed this up? Someone told me disable USB 3.0 to speed things up. Any problems with Asrock MOBO drivers that could affect this?
View 1 Replies
View Related
Jul 15, 2012
Windows 7 keeps minimizing every hour to desktop no matter what is running. I ran process explorer just before the time it should lose focus and only one program launched a minute before it does so, taskhost.exe. I tried to run with all processes killed (including explorer.exe) and that also gave good result, it didn't minimize, however I know not which of the processes does this.I first noticed the problem as screensaver quits on it's own after a while (despite the fact it has to quit on click or key press)
View 1 Replies
View Related
Apr 20, 2012
I have desktop that is less than 2 years old and it is having two problems: First, if I step away from the computer for a few minutes and come back to the computer, the screen is black and none of the keys will wake up the monitor. Also, I am unable to turn off the tower, even when holding down the button for 10 seconds. The only way to turn it off is to unplug the tower. When I plug it back in, I get everything back on the screen just like it was before I walked away.
The other problem is that the system clock will not keep time. This just happened a week or so ago. Whenever I manually update the sync, it resets, but won't keep time for long. From reading other posts on this forum, it seems that the CMOS battery may be an issue. Since the computer isn't that old and isn't used constantly, does that still seem reasonable? Is that normally covered under a warranty? I have never had a problem with other computers.
View 4 Replies
View Related
May 4, 2011
For some reason , my computer restarts without notice , just seems to lose power all of a sudden, then it will start up again..This generally happens when CPU usage is at 90+% some games that have been doing this areCrysis 2 << (even on low)ApB Reloaded <<(lowest settings as well)Nba 2k11
View 3 Replies
View Related
Jul 15, 2011
So. Running XP.2 (can't run XP.3; it kills Adobe's CS2 apps, which I need). Had a spare partition. Before putting Ubuntu back on it, I figured I'd install the Win7 Ultimate that'd come (unused) with another computer.
(The install was smooth enough. The updates were slower'n snail poo. But after turning almost everything back to the Windows Classic theme, it's almost bearable. Only two of my devices were unrecognized and unsupported, and they're no surprise; the tablet's nearly twenty years old (even the manufacturer doesn't support it) and the scanner's older still.)
Installed copies of my must-have software--Office 2003 (I've had to suffer through Office 2007, and will never ever ever put it on a machine I have to work on), Photoshop and InDesign CS2, Winamp .
I got my first real exposure to User Access Levels when, the first time I ran Word 2003, Win7 wouldn't let me save the new Normal.dot. I later went and copied my much-customized normal.dot from its XP location, so the file's at least there.
But: I run Word on a portrait-oriented monitor. Under XP, Word remembers the window size and position, and it's exactly where I want it, all the time. So far, every time in Win7 I've opened up an existing document, the Word window has instantly shrunk to around 40% of the size it's supposed to be.
I'm curious if this is a cling-on permissions issue with normal.dot under Win7, or a registry setting that simply hasn't gotten made (in XP, Word seemed to take care of remembering where I put and closed it by itself). Did a search, but didn't see any questions that seemed to relate to this, so I'll ask.
(I'm trying to like Windows 7, I really am. I don't much, but I'm trying. I don't mind the thought of getting a new tablet, and I've got another scanner I can use. But I really dislike having to resize my windows every time I open a document--I spend 75% of my time on the PC in Word, just writing.)
And again, I hate, loathe and despise Office 2007 and 2010. I do most emphatically not like the "death by honey and marshmallows" interface that microsoft seems to think is so great.
View 3 Replies
View Related
Nov 27, 2011
I have an Asus G50vt-x5 laptop (with windows 7 now, originally had vista), and my old battery was losing charge so quickly. So, i got a new one. I did everything you were supposed to, charged it up, discharged it, charged it again, etc.For some reason, i can just be playing or doing things on my laptop, and it'll randomly just lose ALL power. For example, i was playing a video game the other day and was at roughly 65% battery, and suddenly the computer just instantly died. And i don't know if any of you have seen an asus, but there is a little light on the panel with the power button for like a "quick start", and that light is ALWAYS on. but when the laptop died it wasn't. Which i take it means absolutely no power was going to the laptop.
View 9 Replies
View Related
Mar 4, 2011
I keep losing LAN connection within 1 minute after my computer wakes from sleep modeI cannot ping the router, the DSL modem and anything outside.Windows "repair connection" tool fixes the problem until the next time I put computer to sleep.have Windows 7 32 bit, integrated Intel LAN card. Can't blame McAfee because when I uninstalled it and replaced with Microsoft Essentials this behavior didn't change
View 1 Replies
View Related
Jan 24, 2012
I don't know if this is a harware issue with my SSD, disk controller (motherboard), power supply or something else, but depending on what I'm doing, the computer will operate for a few minutes then freeze and eventually reboot itself. When it reboots, I get the "Bootmgr is Missing" message until I cycle power a couple of times. I've tried booting from the Windows 7 repair disk and typing "bootrec /fixboot", but the problem eventually returns.I can't get a full image update from Acronis because it hangs in the middle of the image, even if I say to ignore bad sectors. If I run the HDTune diagnostic on the SSD, it seems to always stop after about 3 minutes and always in the same spot, at 15,432MB. Is this a problem with the SSD or the disk controller?
Configuration:
O/S: OS Microsoft Windows 7 Ultimate (6.1.7601 Service Pack 1 Build 7601)
Motherboard: Gigabyte GA-MA78LMT-S2
CPU: AMD Phenom(tm) II X4 840 Processor, 3200 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date:Award Software International, Inc. F13, 8/31/2010
SSD:Microcenter SSD G2 series 64GB ATA Device
HDD:Hitachi HDS721010CLA332 ATA Device (1TB)
RAM:8GB
View 4 Replies
View Related
Jan 24, 2012
I don't know if this is a harware issue with my SSD, disk controller (motherboard), power supply or something else, but depending on what I'm doing, the computer will operate for a few minutes then freeze and eventually reboot itself. When it reboots, I get the "Bootmgr is Missing" message until I cycle power a couple of times. I've tried booting from the Windows 7 repair disk and typing "bootrec /fixboot", but the problem eventually returns.I can't get a full image update from Acronis because it hangs in the middle of the image, even if I say to ignore bad sectors. If I run the HDTune diagnostic on the SSD, it seems to always stop after about 3 minutes and always in the same spot, at 15,432MB. Is this a problem with the SSD or the disk controller?
Configuration:
O/S: OS Microsoft Windows 7 Ultimate (6.1.7601 Service Pack 1 Build 7601)
Motherboard: Gigabyte GA-MA78LMT-S2
CPU: AMD Phenom(tm) II X4 840 Processor, 3200 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date:Award Software International, Inc. F13, 8/31/2010
SSD:Microcenter SSD G2 series 64GB ATA Device
HDD:Hitachi HDS721010CLA332 ATA Device (1TB)
RAM:8GB
View 2 Replies
View Related
Jun 21, 2012
Whenever I press the sleep button on my computer, or when I leave it idle and it goes to sleep by itself, I get a blue screen of death. I would really like to solve thiNow, this computer came with an AMD video card, but I uninstalled those drivers and took out the video card and installed a GTX 570 from EVGA. The drivers are up to date, so I am pretty sure the new hardware is installed correctly. Furthermore, it was not doing this for the first few months of having the video card installed. This is very recent, so I don't understand what it could be
View 7 Replies
View Related
Jul 30, 2009
For some reason, my 'sleep' has stopped working - either from the sleep button, or on the Start button option.
Now it just goes to the user login screen.
Has always worked perefctly until today.
Weird. Any ideas?
View 2 Replies
View Related
Apr 1, 2012
I know there are a bunch of sleep problems out there but I couldn't fine one similar to this after doing a forum search. Running Windows 7 Ultimate. Sleep used to work ok but now when I choose sleep from the start menu, the screen blacks out but the computer doesn't actually go to sleep. The fans, activity lights, hdd lights are all still running. If I move the mouse the screen comes back. However, if I just wait for the sleep timer to kick in then the computer does go to sleep (all fans stop running and all lights go out). I'm not sure what caused this. I use my pc as an HTCP and now when I push the power button on the remote the pc does not go to sleep.
View 9 Replies
View Related
Apr 21, 2011
I currently run Windows 7 ultimate 64bit, 8gig ram, intel i7-2600k cpu, and my OS runs on an OCZ SSD (all specs are in my profile)Sleep mode is set to S3 in BIOS, I have hibernation disabled (so no hibernation.sys file on my c drive)When I put my computer to sleep then immediately wake it up, the login screen shows instantly, I type in my pass and it loads in like 0.5 seconds.When I put my computer to sleep but wait for around 1-2 hrs before waking it, it shows the login screen instantly but after i hit login, it gives me the Welcome spinning circle thingy for like 20 seconds before I can see my desktop. That's like longer than my entire boot-up time excluding POST.Event viewer doesnt show any performance delay, and I dont think my OS drive (OCZ vertex 2) has a cache so I have it disabled. I'm sure all my mobo drivers and graphic drivers are up to date.
View 2 Replies
View Related
May 20, 2012
Sometimes when I click start and sleep on my computer (windows 7) the monitor will go to sleep but the computer is still running. I cannot wake my monitor up so there is nothing I can do to wake it up besides manually turning it off using the button on the computer case.
View 1 Replies
View Related
May 21, 2012
I have a Win7 Ultrabook. I'm using Areca backup software to backup my personal data.I created a Scheduled Task to run my backup weekly.I set it so that it would wake from sleep to run the task. But I'm having trouble finding a setting to tell it to return to sleep if it woke itself up. Is it possible to do so?In the alternative, is there something I can insert in my batch file (the scheduled task runs a bat file) to tell my book to enter sleep mode?
View 2 Replies
View Related
Jan 19, 2012
wreaks havoc with my Norton full system scan. It is scheduled weekly, but never does it, because my computer is on, but sleeping. How can I get the scan to not stop during sleep mode or scan if it's in sleep mode? I having to constantly unsleep my computer or change my control panel settings then change it back.
View 8 Replies
View Related
Sep 22, 2012
I started up my Del lap top after 3 mos on the shelf. First thing it did was update windows 7 by itself. Since then even the most basic web sites take forever to load and when they do things like changing panes and using the slider do not work. The log shows no failures except I tried to load Skype and the system quit. I uninstalled that.I log into a web site, like Huffingtonpost, Yahoo etc and they take multiple minutes to load. I tried to log into the del support site, well you can forget that. This message is being written on my main computer because trying to crank up your web site is impossible. My home page is msn.com. I tried to change it to Google think that was the problem.
View 10 Replies
View Related