I've been experienceing crashes with my computer for a while and have been ziping my minidump files and putting them on a fourm but now the minidump file has a lock icon on it. It also wont let me zip the dump files anymore. I tried changing the permissions of the users but when ever i change anything from alow or deny it says access denied.
View 9 RepliesI probably did a dump thing (only the 100,000th in my lifetime!). I backed up my working folders on my XP desktop into a zip file where the options were set to save the relative path of each file. I then extracted the backup zip file to my Win 7 laptop, not remembering that Win 7's folder structure is different than XP's. So I wound up with a new folder on the laptop "Documents and Settings", with all the stuff that was under it. So I was going to open it, move the files from (XP's) My Documents to (Win 7's) Documents. . . but there's just a weeeeeee problem: The Documents and Settings folder is LOCKED!!I have gone to the Security tab under properties and changed the permissions to allow EVERYONE full access, and it still denies me access. I downloaded Unlocker, but it doesn't show up in the menu when I right click the folder, so I have no idea what it's good for/how to use it. I can't delete it because that's not a choice on the menu when you right-click it.BTW, yesterday it had a padlock icon overlay on it. Today it has a shortcut arrow. I also have no idea why it's showing as a shortcut.
View 9 Replies View Relatedin the root of C the doc's and settings folder is locked, is there any way to unlock it?
View 3 Replies View RelatedI have problems deleting files and folders which were created for temporary purposes. Usually folders with a temporary picture collection, which I have created just to get it zipped and mailed. Since I use Picasa (which is usually open), there are systems files which are created automatically and stay locked for quite some time, even when all the pictures were erased. Is there any quick and simple way to delete locked files in Windows 7?
View 1 Replies View RelatedI had a folder that was set as private to prevent network sharing access. It's located on an internal hard drive other then my main C: partition. I re-formatted my C: and did a clean install of Windows 7 64bit. After words I tried access the same folder, and it said I didn't have permission but windows still gave me full access after it appeared to have indexed the folder. That was about a week ago. Now when I try to open a specific subfolder within, Windows explorer crashes. i really need the data out of it though. I dont see a way to alter the permissions now to revert them back.
PS i have the problem signature below:
Problem signature: Problem Event Name:BEX64
Application Name:explorer.exe
Application Version:6.1.7600.16768
Application Timestamp:4d688122
Fault Module Name:StackHash_8b64
Fault Module Version:0.0.0.0
[code].....
My husband and I just got a new desktop, I originally planned on sharing a user account but since we're both in school I figured to have our own user accounts just to keep our files more separated and everything. So I created a second user account for me. I then realized that since he uses MY iTunes account, it makes sense that we use a shared music folder. Somehow I effed up my folders, the Public Music folder in particular. The only way I could see how to fix it was to restore it. Well that fixed the music folder problem, but it restored the computer back to before I had set up my own user login. No problem, I went back in and re-created it. Now my problem is that the user accounts are just fine, but the user folder from my first account is still in the the C drive under "users" but technically there is no user account that's attached to it. And of course, the folder is locked. I tried to delete it, but got a popup saying I was about to delete a system file so How to I remedy this situation???
View 1 Replies View RelatedI've recently picked up a new hard drive from a buddy of mine.I've managed to change my computer name and user account name.However, the user folder in "My Computer -> Local Disk C: -> Users" is locked, and I am unable to change the name.It doesn't cause any problems, I just want to find a way to change it if its possible.As well, I've also set permissions, but it only allows me to access the files, which is not the problem, since I only want to change the name of the User Account Folder.
View 1 Replies View RelatedI noticed my laptop being slow and so I checked the active processes. Found an unknown process dllhost.exe using a massive portion of CPU. A friend of mine managed to locate file and alter it so that it was restricted to only the admin of the machine (me), along with another file below it (dllhst3g) � was worried that this was some sort of infection that went unnoticed by my antivirus software which at the time was Stop Sign. Since locking files computer worked faster but have been unable to scan computer for infections as Stop Sign couldn�t be update for unknown reason. Since then have been infected with virus which stopped me getting to cmd tool, task manager and changed desktop background. Started laptop in Safe Mode with networking, got a copy of Malwarebytes' Anti-Malware which managed to find the problem and delete it. Then was advised to use Avast anti-virus and had no problems since. My main problem is that the 2 files are still locked off and I am wondering how important those processes are? Also, my primary concern is the sudden inability to perform administrator tasks. I am the only user on my laptop and am an administrator according to profile on Control Panel, but when trying to perform Microsoft Windows Update receive pop-up message saying: You need to provide administrator permission To complete this task, you need to log in as an administrator or ask an administrator to complete the task for you. One of the updates to be downloaded is Windows 7 Service Pack. gain admin privileges again and let me know how important the dllhost and dllhst3g files are and/or how to unlock them?
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU T6500 @ 2.10GHz, x64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 3039 Mb
Graphics Card: ATI Mobility Radeon HD 4500 Series, 512 Mb
Hard Drives: C: Total - 466430 MB, Free - 195776 MB;
Motherboard: Sony Corporation, VAIO, N/A, N/A
Antivirus: avast! Antivirus, Updated and Enabled
I'm having trouble getting my Documents & Settings folder to copy into my external drive for backup purposes. The external drive already has this folder in place and the proper files and folders within D/S as I have been routinely backing it up for the last few years. However, now when I try to Copy Folder To the external drive, I get the error message that access to the J drive (external drive) is denied. As you can see from the pic below, the D/S folder on my hard drive is apparently locked. I don't recall locking it and how do I unlock it so that I can copy to to the external drive?
View 3 Replies View Relatedi am selling a laptop to a co-worker but am having troubles changing the user name. This is windows 7 home premium 64 bit. The folders under "users" are the "public" and then my name. I want to change it from my name to their name but it has a lock symbol on the folders icon and I cannot figure out how to do it.I was able to go into user accounts and change the name there, no problem. But the "users" folder will not change also.
View 6 Replies View Relatedtrying to get some help solving an issue my PC is having. I am getting constant blue screens and need to diagnose the problem, but I cannot access my minidump files. I have tried moving them to other folders and also tried using the "take ownership" command. Yet still I cannot get the files to open. I can't open them in wordpad/notepad or even the WINdebugger. I was hoping someone might know how to access the files.
View 13 Replies View RelatedI have recently built a new PC (about a month ago), but I'm continuing to get BSOD randomly. I did have two HDD in my PC and the BSOD were more frequent, but since reducing to one HDD over a week ago, I have just received another BSOD. My biggest problem is that, every time my PC BSOD, it doesn't leave a Minidump for me to analyse. It appears that most of the time the BSOD is displaying KERNAL_DATA_INPAGE_ERROR and either volmgrx.sys or nfts.sys.
PC as follows -
Gigabyte GA-Z68X-UD4-B3
Intel i5 2500K
G. Skill Ripjaws X F3-12800CL9D-8GBXL
Gainward GeForce GTX 580 3GB Phantom
Pioneer BDR-206 Blu-Ray Disc Writer
OCZ Vertex 3 120GB SSD
Samsung SpinPoint F3 1TB HD103SJ (not currently connected as above)
Windows 7 PRO 64bit
I've tried to do my research on this and I've done a LOT of troubleshooting so far. For the past 6 months, I have been getting BSOD about 3 times a week at complete random times. It mostly occurs overnight when I'm asleep. I have tried deactivating all hibernate and sleep functions with no luck. I have tried three different anti-virus softwares and am now using Microsoft Security essentials. I have tried various settings for creating a minidump file with NO luck but I think I might know why. My BSOD is a Kernel data inpage error, stop code 0x0000007A, The sys file is lists 80% of the time is volgrx.sys but I've also seen an NTFS.sys listed.
View 9 Replies View RelatedI have been encountering BSOD's for the last few months. I try to use the SF Diagnostic Tool but the tool says "No Dump Found." I looked at the "windows" folder, there were none. How can I configure the system to create minidump files after BSOD?
View 6 Replies View RelatedGetting several BSOD events. When I try to zip up the files for loading I get access denied. I changed the registry to take ownership to each file, but still not able to zip up using 7 Zip.
View 14 Replies View RelatedSuffers from a repeating BSOD. Unfortunately I reinstalled Windows (win7 x86 sp1) before thinking to package up the minidumps. However, when installing Office the computer conveniently bsod'd, hence the uploaded minidump.I'd be grateful if someone would take a look at it for me - let me know if you need more information regarding the system. All I know is that it's a brand new install, and isn't likely to be due to graphics hardware, as both the current gfx card (AMD hd5450) and the old (an older AMD/ATI graphics card) both suffered from BSODs. Additionally, I've run a pass of Memtest and of Prime95, without any errors reported
View 1 Replies View RelatedI used BlueScreenView to check what was the cause of the multiple BSOD's i was always getting and it turns out it is ntoskrnl.exe. However, i cannot zip the minidump .dmp file to upload and I cannot view the file's contents at all either.
View 9 Replies View RelatedI have small memory dump filea enabled in startup/Recovery I have checked the regisrty and writing files is enabled and being sent to C:/Windows/MinidumpPage file ia enabledBut windows still will notWrite minidump files
View 8 Replies View RelatedI have encountered BSOD many times and I am not sure what has caused this. Can someone please check the minidump files for me since I do not know how to read them myself.
View 0 Replies View RelatedCant boot a Windows 7 64 bit. I am trying to know if it is a driver or sys file involved. Is there an .iso available that will boot into linux or something and can open a minidump file? I see there is a 200MB downloadable MS file............ rather involved......
View 1 Replies View RelatedThe past few weeks she has been getting frequent BSODs, usually three or four a day: KERNEL_DATA_IMPAGE_ERROR.While I know enough to view this using BlueScreenView, I'd like to know how to interpret it
View 6 Replies View RelatedI have been getting a BSOD when playing civ 5 and my computer will not create a minidump file! I followed all of the steps in the guide on how to make your computer create a minidump file. Is there any other way to get it to create one?
View 2 Replies View RelatedI've spend the last week scouring Windows 7 Forums finding dozens of people with this issue. At random times, during use or idle, the computer goes blank and reboots.Starting from a clean install of an OEM copy of Windows 7 Home Premium 64-bit on a formatted HDD
1. Updated all drivers for my devices for Windows 7
2. Loaded and installed all current Windows Updates
3. Flashed and updated the BIOS
4. Ran the driver Verifier, did not see any errors reported
5. Tried to run sfc /scannow, system reboots when the scan gets to about 60% (tried twice)
6. All non-necessary devices (printer, external HDD, etc.) are disconnected.
I would attach a minidump file but there isn't one. I've got the system set to record one but it's not there. I have the view set to display all hidden files/folders. I've done searches for *.dmp files and typed in the address I've got set in the options ... no dice.I never get the BSOD, I have it set to not automatically reboot. It still goes blip and restarts anyway. There's no real pattern to the restarts but it loves to do it in the midst of installations.I've held off running a memory test simply because all my fellow sufferers keep reporting no errors in the memory and any time I do anything time consuming it fails when the system goes blip again. System Info via Advisor attached.
Assume I work currently with MS Word and/or an text editor like wordpad.Then (suddenly) the system crashes with bluescreen.A Minidump is automatically created and saved in a Minidump file.After restart I am asked whether I want to send this minidump for further investigation to MS.Hmm, I wonder whether this Minidump file contains the full memory content.And if the memory content contains the current MS Word resp. current open file if editor.Both could contain sensitive business information which I don't want to pass outside.Is this the case
View 3 Replies View RelatedThis is a windows 7 x64 AMD CPU, Radeon HD5770, eyefinity triple monitor setup. About two years old system.
AMong 2 monitors, I have 2x Acer X193w connected via DVI, another one is a X2gen connected via display port.
The X2gen monitor usually won't turn on when I wake the computer up, it make the "tip tip tip" clicks for minutes before eventually turned on.
It was fine until about 2 weeks ago, crashed 6 times so far.
I'm experiencing random overnight crashes, always similar to below minidump (below) results (iastor.sys is implicated) but cant figure out what brought it to this point. System is up to date, iastor.sys hasn't changed since 2/1/2012. Ran Malwarebytes and Norton360 scan. System is clean otherwise.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 32 bit
Processor: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, x64 Family 6 Model 15
[Code].....
on every attempt to bring system window from control panel or right clicking my computer explorer.exe crashes, problem is no minidump is created to include, and i do have it enabled from "sysdm.cpladvancedstartup"
View 1 Replies View RelatedI am the developer of a driver for a network adapter device that does scatter-gather DMA. Driver is not newly developed, but has had some recent changes.My client has a puzzling BSOD on one x64 machine after about 18 hours of successful operation. My x64 Win 7 machine runs fine forever. Client's box crashes in seemingly random places that indicate mem corruption.Mem test on machine was clean. Minidump is attached. WinDbg stack doesn't trace back to my code - it just shows the calls to handle the exception. Any clues y'all can see?System info from WinDbg:Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64Product:WinNt, suite: TerminalServer SingleUserTSBuilt by: 7601.17640.amd64fre.win7sp1_gdr.110622-1506One difference between client's x64 and mine: Theirs has a valid DMA MapRegisterBase pointer from a AllocateAdapterChannel call, where mine (and my x86 systems) always have a null DMA MapRegisterBase
View 1 Replies View RelatedSo I am helping a friend with her Live mail (Hotmail). I dont use it so you will have to forgive me. She forgot her password and it locked her out of the account. She has tried the passwords that she has written down and none of them work. We tried the forgot your password link and had it sent to an email of hers that no longer exists. Then tried to send it to her trusted PC but there is constantly an error code for some reason. Then I tried having it sent to another email address (mine) but I have to verify her Identity. the questions it asks are such as the last subjects sent, last addresses sent to, CC info, Xbox tag, she doesnt have Xbox, CC info on there, nor remembers last addresses sent to other than mine and one other one nor one last subject entry. When I tried sending it off the first time. Microsoft pushed it back saying "there is not enough information to verify identification" then I tried it a second time and it went through but it failed to send me her temporary password or anything. Is there a way I can get into her mail for her or a password cracker or something that I can help her get back into her email. She has been locked out for about 3 weeks now.
View 4 Replies View RelatedI just unpacked a new PC here at work and begun setting it up. I neglected to set a password for the default Administrator account and proceeded with the setup. Once I was at the desktop I connected the computer to the domain. At that point I logged off, switched over to my account on the domain. I started installing the programs which the employee required to do her job but because of the heightened security in Windows 7 I was not able to run any files as administrator. When I did try it said the Administrator account was disabled. I logged off my account and tried to log back into the Admin account and sure enough it's disabled.I've done searches in this forum and found similar problems but not quite like the one I am facing in that I never created a second account. So the only account that exists on this PC is the default administrator account which is locked out. I tried booting into safe mode and it still said the account was disabled. How can I resolve this issue?
View 7 Replies View RelatedI admit I did not do an exhaustive search but the issue I am facing is this.
When the screen locks, there is no option to log off the current user. All that is displayed is the password field for the currently logged in account.
I do have some GPO's running but didn't see anything that glared at me that I had removed it.
I am using the technet RTM x64 in our testing environment.